Texas Instruments

CD4029BPW - 4-Bit CMOS Up/Down Counter | Texas Instruments

MPN: CD4029BPW ✓ Nakahanda
3 V to 18 V Vdss 16-pin TSSOP Package 11 MHz Speed
MOQ: 1 |

CD4029BPW Ulas

Texas Instruments CD4029BPW is a 4-bit CMOS presettable up/down counter IC with a 3 V to 18 V supply range, operation up to 11 MHz, and a 16-pin TSSOP package. It supports both binary counting and decade counting, with the counting direction selected by a logic control input. The positive-edge clock architecture makes the device suitable for digital sequencing, position tracking, industrial control, and programmable timing systems.

A counter IC is a member of the broader digital logic hierarchy that includes counters, dividers, registers, and shift registers. The CD4029B family adds reversible counting to that category: a clock pulse advances or reverses the four-bit state, while preset and reset controls allow the counter to be loaded or cleared. Because the device supports both binary and decade modes, one counter can implement modulo-16 binary sequences or decade sequences for timing and sequencing applications.

Principal features include four parallel counting outputs, selectable up or down operation, binary or decade counting, preset control, carry output, and positive-edge clocking. Its operating supply range of 3 V to 18 V allows operation across common low-voltage and higher-voltage CMOS logic systems. The listed maximum clock frequency of 11 MHz establishes the operating point for designs requiring medium-speed counting rather than high-frequency timing-chain performance.

The CD4029B is implemented as a CMOS logic integrated circuit, allowing operation from a single 3 V to 18 V supply. Its 16-pin TSSOP package supports compact surface-mount assemblies, while the four outputs provide direct state visibility. Designers should account for propagation delay, setup and hold requirements, and the permitted clock transition times when evaluating the maximum operating frequency in a particular system.

Typical uses include industrial step and cycle counters, programmable sequence controllers, digital timing modules, phase and position counters, and control systems requiring bidirectional counting. The decade mode can simplify decade-oriented display or sequencing systems, while binary mode supports modulo-16 state machines. The carry output can be monitored by adjacent logic to indicate a count boundary.

For PCB implementation, place the clock and control inputs away from high-current switching paths, and use a defined common ground reference. CMOS inputs should not be left floating, and unused inputs should be tied to a defined valid logic level. Power-supply bypassing and signal-integrity review should follow the layout guidance in the manufacturer datasheet.

This page organizes the CD4029BPW function, package information, design considerations, commercial information, and validated replacement analysis into one engineering-focused reference. It also distinguishes exact drop-in options from variants that differ in package, pinout, or qualification, helping designers avoid substitution errors before schematic release.

Mga alternatibo na pwedeng ilagay na CD4029BPW — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok CD4029BPW (parehas na form factor at footprint) — pagkakaiba sa Counter Type, Counting Direction, Logic Family, Mounting Type, Number of Outputs.

Texas Instruments
Counter Type: 4-bit binary / BCD-decade up/down counter
Counting Direction: Up/Down selectable (UP/DOWN input)
Logic Family: CMOS CD4000 series
Ikabit sa CD4029BPW →

Wala ng magagamit na drop-in alternatibo para sa produkto na ito.

Hilingin ang Alternatibo

CD4029BPW Mga Pinakamataas na Rating at Electrical Characteristics

Counter Type Binary/decade presettable up/down counter
Number of Bits 4 bits
Number of Elements 1 element
Supply Voltage Range 3 V to 18 V
Maksimum na Taktiko ng Oras 11 MHz
Clock Edge Positive edge
Counting Direction Up or down
Counting Modes Binary or decade
Bilang ng Outputs 4 outputs
Preset Function Asynchronous preset
Package Type 16-pin TSSOP
Package Width 4.40 mm
Package Body Width 0.173 mm
Uri ng Pagpapasok Surface mount
Logic Family 4000B CMOS series
RoHS Compliance Unknown
REACH Compliance Unknown
Automotive Qualification Not applicable

Gabay sa Pin Configuration ng CD4029BPW 0.173 mm

Pin configuration para sa CD4029BPW (0.173 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 0.173 mm package para sa CD4029BPW

Wala ng detalyadong pinout data na magagamit para sa CD4029BPW.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

CD4029BPW ay nararapat para sa 6 aplikasyons: Industrial Sequence Control, Programmable Digital Timer, Position and Step Counter, Digital Phase Counter, Industrial Test and Measurement, Automation and Robotics Control.

🏭

Industrial Sequence Control

The CD4029BPW fits industrial sequence-control blocks because it combines 4-bit counting, selectable up or down direction, binary or decade modes, and a carry output within one 16-pin TSSOP device. A controller can load a preset state, advance on each positive clock edge, and use the carry output to mark a count boundary. Its 3 V to 18 V operating range supports multiple logic-supply levels, while the 11 MHz maximum clock frequency accommodates medium-speed machine-event counting. Design the timing budget around propagation delay and ensure that preset or reset timing conforms to the manufacturer datasheet.

⏱️

Programmable Digital Timer

CD4029BPW can form the counting core of a programmable timer or elapsed-event counter by loading a preset value and observing the four parallel outputs as the state advances. Binary mode supports a modulo-16 event count, while decade mode is useful when the application is organized around groups of ten. Reversible counting can support repeat or retrace functions. The 11 MHz clock capability provides substantial margin for moderate-rate timing references, but the final maximum frequency must account for output propagation delay and the external logic driving the clock.

🔧

Position and Step Counter

A bidirectional counter such as the CD4029BPW is useful in position and step-counting systems because the count-direction input can be changed without changing the clock architecture. The four outputs expose the current count for comparison, decoding, or display-control logic. Positive-edge clocking supports a clean reference-to-counter arrangement in incremental encoder and actuator-position systems. The 3 V to 18 V supply range accommodates common digital control voltages, while designers should use conservative clock rates if mechanical switch bounce can create multiple edges.

⚙️

Digital Phase Counter

The CD4029BPW can count phase or index events when the system must distinguish forward and reverse motion. Selectable binary counting retains all four state bits, and the carry output provides a convenient indication of an overflow or count-boundary event. This arrangement is suitable for motor-control feedback, rotary mechanisms, and repetitive actuator indexing. The counter's 11 MHz maximum clock frequency is well above typical low-rate position-event frequencies, but input conditioning must suppress bounce and ensure clean positive edges.

📟

Industrial Test and Measurement

CD4029BPW can serve as a repeatable event-counting element in test and measurement fixtures where pulses must be tallied in a known direction. A preset establishes the starting state, the clock input counts qualified events, and the parallel outputs can be read by a controller. The logic family operates from 3 V to 18 V, which can simplify interface design around different test systems. Instrument builders should verify settling time, clock jitter tolerance, input thresholds, and timing margins at the intended 3 V or higher operating voltage.

🤖

Automation and Robotics Control

The CD4029BPW is appropriate for compact automation logic that tracks recurring steps, cycles, or indexed positions. Its TSSOP package preserves board area, and the four count outputs can feed comparison logic or a programmable I/O interface. Selecting decade mode simplifies ten-step cycle organization, while binary mode supports arbitrary four-bit states. The 3 V to 18 V supply range integrates with common embedded-control rails, and the carry output can trigger a machine action at a defined count. Validate control latency and electrical isolation at every actuator interface.

What is the CD4029BPW and what does it do?
The CD4029BPW is a 4-bit CMOS presettable up/down counter that counts in either direction and can operate in binary or decade mode. According to the Texas Instruments CD4029B datasheet, the device provides four counting outputs, a carry output, preset and reset controls, and positive-edge clocking. Its 3 V to 18 V supply range and 11 MHz maximum clock frequency make it suitable for digital sequencing, timing, and bidirectional counting systems.
What are the key specifications of CD4029BPW that engineers should know?
The CD4029BPW is a 16-pin TSSOP counter IC with 4 counting bits, one counter element, four outputs, and selectable up or down counting. According to the Texas Instruments CD4029B datasheet and product information, its supply-voltage range is 3 V to 18 V and its listed maximum clock frequency is 11 MHz. It also supports binary and decade counting modes, positive-edge clocking, preset loading, reset, and a carry output.
Where can I download the CD4029BPW datasheet PDF?
The official CD4029BPW datasheet PDF is available from the Texas Instruments CD4029B product page at https://www.ti.com/lit/ds/symlink/cd4029b.pdf. The document covers the CD4029B family's operating conditions, logic behavior, electrical characteristics, and package information. Use the pin-description table and timing diagrams in that datasheet when assigning PCB tracks and verifying control-input requirements.
Where can I find the CD4029BPW pinout?
The CD4029BPW pinout is identified by the Texas Instruments CD4029B datasheet and the official TI product page. The device is supplied in a 16-pin TSSOP package, designated by the PW suffix. Use the manufacturer pin-description table and package drawing to assign clock, preset, reset, count-direction, carry, supply, ground, and output functions before finalizing the schematic.
How does CD4029BPW compare with a 74-series counter?
The CD4029BPW offers adjustable binary or decade operation, up or down counting, and a 3 V to 18 V supply range, while 74-series counters commonly use a fixed 5 V supply and fixed counting configuration. A relevant site-listed alternative is SN74LS93DR, a 4-bit binary counter. The functional direction is similar, but voltage range, logic family, operating speed, and counter-mode requirements must be checked before substitution.
When should I choose CD4029BPW over a decade counter?
Choose CD4029BPW when the design requires selectable up or down counting in addition to binary or decade operation. The Texas Instruments CD4029B datasheet identifies these as integrated counter modes, and the device includes a carry output for detecting count boundaries. For a fixed decade-only sequence, SN74LS90DR may be simpler; for a fixed binary sequence, SN74LS93DR may reduce control complexity.
Is CD4029BPW suitable for industrial control systems?
The CD4029BPW is suitable for many industrial control and sequencing systems because it combines a 3 V to 18 V supply range, positive-edge clocking, four visible count outputs, and programmable count direction. Its 11 MHz maximum clock frequency supports medium-speed event counting and state sequencing. Confirm the required operating temperature, noise immunity, and system qualification conditions before releasing the design for an industrial environment.
What is the best drop-in replacement for CD4029BPW?
A drop-in replacement must use the same 16-pin TSSOP footprint and match the CD4029B pinout, supply range, count modes, and clock timing. The validated cross-reference material did not identify five distinct same-package alternatives that meet all of these conditions, so no substitute is presented as production-approved without further qualification. Use the Texas Instruments cross-reference search and compare any candidate against the official CD4029B datasheet.
Can CD4029BPWR replace CD4029BPW?
CD4029BPWR uses the same 16-pin TSSOP electrical configuration as CD4029BPW, but the PWR suffix identifies the tape-and-reel ordering form. It is therefore a packaging or ordering option rather than a distinct functional replacement. The Texas Instruments CD4029B datasheet states that the PW and PWR suffixes are both 16-lead thin shrink small-outline package variants.
What is the difference between CD4029BPW and CD4029BEX?
The CD4029BPW is identified as a 16-pin TSSOP device, while CD4029BEX represents a different CD4029-family package option. Although both belong to the 4-bit up/down counter function family, a different package generally changes the board footprint, lead geometry, and PCB land pattern. Do not treat CD4029BEX as a drop-in replacement for the TSSOP CD4029BPW without a documented pin and package comparison.
Is CD4029BPW the same as a 74LS90 decade counter?
The CD4029BPW and SN74LS90DR are not the same device. The CD4029BPW provides a 4-bit counter with selectable binary or decade mode and selectable up or down direction, while SN74LS90DR is a dedicated 4-bit decade counter. Their clock, reset, preset, and supply requirements must be reviewed before using one in place of the other.
Where can I buy CD4029BPW online?
Use the Request a Quote form on this page to request CD4029BPW availability, current unit pricing, quantity breaks, and lead time. The verified manufacturer and distributor listings identify CD4029BPW as a Texas Instruments 16-pin TSSOP counter, but they do not provide a qualifying quantity-break price table. A formal quotation also allows the requested package form and production quantity to be confirmed.
What is the price of CD4029BPW?
Current CD4029BPW pricing is obtained through the Request a Quote form on this page so the unit price and quantity breaks can reflect the requested quantity and sourcing date. The verified product listings establish the exact 16-pin TSSOP part but do not print qualifying quantity-tier prices. Request a quote for the exact manufacturer part number CD4029BPW to avoid comparing a different package or ordering suffix.
What is the lead time and stock status of CD4029BPW?
Current stock and lead time for CD4029BPW should be confirmed through the Request a Quote form on this page. The Texas Instruments product page lists the CD4029B family, and distributor search results show the part, but they do not establish a guaranteed XAIPART inventory position. Supply status can change by quantity, package form, and date, so request a written quotation before committing the BOM.
How should CD4029BPW inputs be handled in a PCB design?
Do not leave the clock, preset, reset, or count-direction inputs floating. Follow the Texas Instruments CD4029B datasheet for the logic levels and timing relationships required by the selected operating mode. Keep the clock trace short, maintain a continuous ground reference, and place bypass capacitance close to the supply pins. Confirm propagation-delay timing against the highest external clock frequency used by the system.

Impormasyon ng Talumpati sa Engineering for CD4029BPW — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the CD4029BPW when a design requires a compact 4-bit counter that can count in either direction and operate in either binary or decade mode. Its 3 V to 18 V supply range and 11 MHz maximum clock frequency make it appropriate for medium-speed industrial control, timing, sequencing, and bidirectional event-counting systems. SN74LS90DR is a more specialized choice when decade counting alone is sufficient, while SN74LS93DR fits fixed binary counting without a reversible-count requirement. CD4029BPWR should be treated as the tape-and-reel ordering form of the same TSSOP device rather than a different functional option. Before substituting another manufacturer, require an exact 16-pin TSSOP footprint, verified pin-to-pin mapping, compatible supply and logic levels, and matching timing behavior. Package equivalence alone is not enough for a production drop-in decision.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto
Package 16-pin TSSOP
Brand Texas Instruments
Counter Type Presettable binary/decade up/down counter
Number of Bits 4 bits
Supply Voltage Range 3 V to 18 V
Maximum Clock Frequency 11 MHz
Counting Direction Up or down
Clock Edge Positive edge
Logic Family 4000B CMOS series

Talaan ng Disenyo

Route the clock as a short trace from its source and provide a clean return path beneath the device. Positive-edge counting means multiple transitions caused by switch bounce or noisy shielding can increment the count more than once. Use Schmitt-trigger conditioning where an external mechanical or slow-transition signal drives the clock, and keep the preset, reset, and count-direction traces away from switching-node and high-current paths.

Operate the CD4029BPW only within its documented 3 V to 18 V supply range, and confirm that every external signal remains within the valid input thresholds at the selected supply voltage. Place the supply bypass capacitor close to the device's supply and ground connections, with a short, low-impedance ground return. Raise the clock rate only after checking propagation-delay timing and ensuring the source meets the permitted clock transition-time requirement.

Do not leave control inputs floating or assume that preset and reset have identical timing behavior. Verify the required setup and hold relationships in the Texas Instruments CD4029B datasheet before issuing a preset coincident with a clock edge. Also confirm whether the required sequence is binary or decade; an incorrect mode-control level changes the modulus and can make a repeating sequence appear to skip states.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The verified product information identifies the CD4029B as a 4000B-series CMOS logic IC but does not state RoHS, REACH, halogen-free, lead-free, conflict-minerals, or automotive qualification status.

Data napatotohanan sa: 2026-11-19 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

CD4029BPW datasheet CD4029BPW pinout CD4029BPW datasheet pdf CD4029BPW equivalent CD4029BPW replacement CD4029BPW drop-in substitute CD4029BPW TSSOP-16 CD4029BPW 11 MHz counter CD4029BPW price CD4029BPW stock Texas Instruments CD4029BPW CD4029BPW vs SN74LS90DR

Mga kaugnay na Mga Komponente at mga Tuntunin

Texas Instruments CD4029BPW CD4029B CD4029BPWR CD4029BEX SN74LS90DR SN74LS93DR SN74LS85DR CMOS 4000B series 4-bit counter presettable up/down counter binary counter decade counter counter IC digital logic IC positive-edge clock carry output TSSOP-16 TSSOP package family surface-mount package SMD industrial sequence control digital timer position counter
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ