DS90CR211MTD - 21-Bit LVDS Transmitter | Texas Instruments
MPN: DS90CR211MTD ✓ NakahandaDS90CR211MTD Ulas
An LVDS transmitter is a specialized interface circuit that converts low-voltage CMOS or TTL signals into balanced differential data streams. Within the signal-chain hierarchy, it belongs to the LVDS interface family, differential line-driver class, and broader interface IC category. Balanced signaling improves noise immunity and enables reliable data transfer over longer printed-circuit-board traces than ordinary single-ended digital interfaces.
The DS90CR211MTD accepts 21 parallel data bits and serializes them into three differential LVDS lanes. It also forwards a phase-locked transmit clock, allowing the receiver to recover timing from the transmitted stream. The manufacturer describes the device as a 21-bit Channel Link transmitter, and its architecture is intended for transferring parallel digital data over a compact differential interface.
The operating supply range of 4.5 V to 5.5 V supports conventional 5 V interface environments. The 48-TSSOP package offers a relatively high pin count for a parallel-to-serial transmitter, accommodating the 21 data inputs, differential outputs, clock path, power connections, and control functions. Its rectangular surface-mount construction is suitable for automated assembly and multilayer PCB designs.
Typical uses include point-to-point digital backplanes, industrial control links, test and measurement equipment, communication modules, and embedded systems that need to move parallel data across a PCB without relying on a parallel bus. LVDS is especially useful when signal integrity, trace routing, or data-transfer distance becomes more important than connector pin count.
When laying out the transmitter, treat every differential pair as a controlled-impedance route and keep the LVDS outputs short and properly terminated according to the receiver implementation. Confirm the receiver's supported data format, clocking method, supply voltage, and termination before treating the DS90CR211MTD as a drop-in component in a new design.
This product page combines the manufacturer interface description with package information, practical PCB guidance, source-backed alternatives, and a parameter comparison designed to accelerate component selection and board-level integration.
Mga alternatibo na pwedeng ilagay na DS90CR211MTD — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok DS90CR211MTD (parehas na form factor at footprint) — pagkakaiba sa Input Data Width, Package, Packaging, Product Type.
DS90CR211MTDX
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →DS90CR213MTDX
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
DS90CR561MTDX
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →DS90CR211MTD Mga Spesipikasyon
| Product Type | 21-bit LVDS transmitter |
| Input Data Width | 21 bits |
| LVDS Output Streams | 3 differential streams |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Logic Interface | CMOS/TTL |
| Protocol | LVDS |
| Clock | Phase-locked transmit clock |
| Packhaging | 48-TSSOP, 0.240 inch width, 6.10 mm width |
| Uri ng Pagpapasok | Surface mount |
| Packaging | Tube |
| Temperature Grade | Commercial |
| Terminal Form | Gull wing |
| Number of Terminals | 48 terminals |
Gabay sa Pin Configuration ng DS90CR211MTD 48-tssop, 0.240 inch width, 6.10 mm width
Pin configuration para sa DS90CR211MTD (48-tssop, 0.240 inch width, 6.10 mm width package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa DS90CR211MTD.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
DS90CR211MTD ay nararapat para sa 6 aplikasyons: Industrial Data Backplane, Test and Measurement Instrumentation, Communication and Control Modules, Embedded Parallel-to-Serial Expansion, High-Speed Digital Interconnect, Medical and Monitoring Equipment.
Industrial Data Backplane
The DS90CR211MTD is suitable for a point-to-point industrial backplane link that must transfer 21 parallel logic bits across a PCB. Its three LVDS differential streams provide a more noise-resistant physical layer than single-ended CMOS routing, while the transmitted phase-locked clock gives the receiver a dedicated timing reference. The transmitter operates from 4.5 V to 5.5 V, allowing it to share a conventional industrial 5 V power domain. During layout, maintain continuous reference-plane return paths beneath every pair, avoid splitting the ground plane, and confirm receiver termination requirements against the manufacturer application guidance.
Inirekomenda
Test and Measurement Instrumentation
The DS90CR211MTD can reduce parallel wiring between acquisition, processing, and output sections in test and measurement equipment. Serializing 21 bits into three balanced LVDS lanes can make long internal traces more manageable while preserving source-synchronous timing through the phase-locked transmit clock. Because the device uses a 4.5 V to 5.5 V supply, the surrounding instrumentation should provide compatible CMOS levels and clean power. Use controlled-impedance routing, place receiver termination close to the LVDS input, and validate the complete channel with the intended clock rate and target trace length.
Inirekomenda
Communication and Control Modules
The DS90CR211MTD is useful for linking parallel control logic to another circuit section over a compact differential interface. Its 21-bit input width accommodates grouped command, status, or payload data, while the three LVDS streams reduce the number of single-ended traces crossing a potentially noisy board region. The phase-locked clock provides a dedicated timing signal for compatible receiver logic. Designers should establish the serialization mapping, validate clock polarity, and use the receiver manufacturer's termination network. A common 5 V supply is suitable because the transmitter's stated operating range is 4.5 V to 5.5 V.
Inirekomenda
Embedded Parallel-to-Serial Expansion
The DS90CR211MTD can serve as a parallel-to-serial expansion stage in an embedded system where a processor or programmable logic device exposes more data than can be routed economically as single-ended board traces. Grouping 21 bits into three LVDS lanes can improve routing scalability and noise immunity. The transmitted phase-locked clock supports compatible source-synchronous reception. The design must account for CMOS input timing, the transmitter's 4.5 V to 5.5 V operating range, and the receiver's expected clock-to-data arrangement. Differential impedance control and uninterrupted ground references are essential across the complete route.
Inirekomenda
High-Speed Digital Interconnect
The DS90CR211MTD is appropriate when a board requires a compact high-speed digital interconnect between functional blocks. Three balanced LVDS streams carry the serialized data, and the phase-locked clock supplies a separate differential timing path. This arrangement is useful where connector count, trace density, or susceptibility to common-mode noise matters. Place the transmitter close to the data source, keep the differential pairs length matched within the receiver's timing budget, and confirm the maximum data rate supported by the complete link. The 48-TSSOP footprint also requires adequate routing space for 21 data inputs and the associated power connections.
Inirekomenda
Medical and Monitoring Equipment
The DS90CR211MTD may be used inside medical or monitoring equipment for internal transfer of grouped digital data, subject to system-level safety, isolation, and environmental requirements. Its differential LVDS outputs can reduce sensitivity to internally generated noise compared with long single-ended routes, and the dedicated clock supports deterministic timing. The commercial temperature grade must be checked against the enclosure's actual ambient range, while the 4.5 V to 5.5 V supply requirement must be integrated into the power architecture. Use isolated boundaries where required and validate the complete interface rather than inferring compliance from the transmitter alone.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for DS90CR211MTD — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | DS90CR211MTDX | DS90CR213MTDX | DS90CR561MTDX |
|---|---|---|---|---|
| Package | 48-TSSOP | 48-TSSOP | 48-TSSOP | 48-TSSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Supply Voltage | 4.5 V to 5.5 V | Up to 5.5 V | 5.5 V listed | 5.5 V listed |
| Protocol | LVDS | LVDS | LVDS | LVDS |
Pangunahing mga Pagkakaiba
- Defines a 21-bit parallel-to-LVDS conversion function (kumpara saDS90CR213MTDX)
- Includes a transmitted phase-locked clock (kumpara saDS90CR561MTDX)
- Matches a broad conventional 5 V interface environment (kumpara saDS90CR211MTDX)
Talaan ng Disenyo
Route every LVDS output as a controlled-impedance differential pair with a continuous reference plane beneath it. Avoid changing layer geometry, adding test pads, or routing unrelated high-current paths beside the pairs. Keep the transmitter close to the data source and place receiver termination in accordance with the manufacturer application circuit. Differential pair length matching must be based on the receiver's permissible skew and clock-to-data timing rather than an arbitrary visual tolerance.
Do not select a candidate solely because it uses a 48-TSSOP package. DS90CR213MTDX and DS90CR561MTDX share the package family and appear in source-backed comparison listings, but their Channel Link data width, signal direction, and clock behavior may differ. Verify all 48 pin assignments, serialization format, output mapping, supply requirements, receiver compatibility, and termination before approving a substitution.
The DS90CR211MTD operates across a 4.5 V to 5.5 V supply range. Decouple the supply pins near the device with the capacitance and placement specified by the manufacturer datasheet, and provide a low-impedance return path for every signal and power connection. Avoid routing the transmitter's supply through digital return-current paths shared with switching circuitry. Validate the rail at the IC under the intended load and clocking condition rather than relying only on a measurement at the supply source.
Impormasyon ng Pagsunod sa Kautusan
The interface function is not an automotive qualification category. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation.