DS90CR211MTD - 21-Bit LVDS Transmitter | Texas Instruments
MPN: DS90CR211MTD ✓ 啟用中DS90CR211MTD 概覽
An LVDS transmitter is a specialized interface circuit that converts low-voltage CMOS or TTL signals into balanced differential data streams. Within the signal-chain hierarchy, it belongs to the LVDS interface family, differential line-driver class, and broader interface IC category. Balanced signaling improves noise immunity and enables reliable data transfer over longer printed-circuit-board traces than ordinary single-ended digital interfaces.
The DS90CR211MTD accepts 21 parallel data bits and serializes them into three differential LVDS lanes. It also forwards a phase-locked transmit clock, allowing the receiver to recover timing from the transmitted stream. The manufacturer describes the device as a 21-bit Channel Link transmitter, and its architecture is intended for transferring parallel digital data over a compact differential interface.
The operating supply range of 4.5 V to 5.5 V supports conventional 5 V interface environments. The 48-TSSOP package offers a relatively high pin count for a parallel-to-serial transmitter, accommodating the 21 data inputs, differential outputs, clock path, power connections, and control functions. Its rectangular surface-mount construction is suitable for automated assembly and multilayer PCB designs.
Typical uses include point-to-point digital backplanes, industrial control links, test and measurement equipment, communication modules, and embedded systems that need to move parallel data across a PCB without relying on a parallel bus. LVDS is especially useful when signal integrity, trace routing, or data-transfer distance becomes more important than connector pin count.
When laying out the transmitter, treat every differential pair as a controlled-impedance route and keep the LVDS outputs short and properly terminated according to the receiver implementation. Confirm the receiver's supported data format, clocking method, supply voltage, and termination before treating the DS90CR211MTD as a drop-in component in a new design.
This product page combines the manufacturer interface description with package information, practical PCB guidance, source-backed alternatives, and a parameter comparison designed to accelerate component selection and board-level integration.
直接替換替代品,適用於 DS90CR211MTD — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: DS90CR211MTD (相同外形與佔位) — 差異在於 Input Data Width, Package, Packaging, Product Type.
DS90CR211MTDX
✅ 直接替換聯絡詢價
查看資料表 →DS90CR213MTDX
✅ 直接替換📋 參考替代品(不在目錄中)
DS90CR561MTDX
✅ 直接替換聯絡詢價
查看資料表 →DS90CR211MTD 規格
| Product Type | 21-bit LVDS transmitter |
| Input Data Width | 21 bits |
| LVDS Output Streams | 3 differential streams |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Logic Interface | CMOS/TTL |
| Protocol | LVDS |
| Clock | Phase-locked transmit clock |
| 封裝 | 48-TSSOP, 0.240 inch width, 6.10 mm width |
| 安裝類型 | Surface mount |
| Packaging | Tube |
| Temperature Grade | Commercial |
| Terminal Form | Gull wing |
| Number of Terminals | 48 terminals |
DS90CR211MTD 48-tssop, 0.240 inch width, 6.10 mm width 腳位配置指南
DS90CR211MTD(48-tssop, 0.240 inch width, 6.10 mm width 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: DS90CR211MTD.
請參閱 資料表 以查看完整腳位配置。
典型應用
DS90CR211MTD 適用於 6 應用s: Industrial Data Backplane, Test and Measurement Instrumentation, Communication and Control Modules, Embedded Parallel-to-Serial Expansion, High-Speed Digital Interconnect, Medical and Monitoring Equipment.
Industrial Data Backplane
The DS90CR211MTD is suitable for a point-to-point industrial backplane link that must transfer 21 parallel logic bits across a PCB. Its three LVDS differential streams provide a more noise-resistant physical layer than single-ended CMOS routing, while the transmitted phase-locked clock gives the receiver a dedicated timing reference. The transmitter operates from 4.5 V to 5.5 V, allowing it to share a conventional industrial 5 V power domain. During layout, maintain continuous reference-plane return paths beneath every pair, avoid splitting the ground plane, and confirm receiver termination requirements against the manufacturer application guidance.
推薦
Test and Measurement Instrumentation
The DS90CR211MTD can reduce parallel wiring between acquisition, processing, and output sections in test and measurement equipment. Serializing 21 bits into three balanced LVDS lanes can make long internal traces more manageable while preserving source-synchronous timing through the phase-locked transmit clock. Because the device uses a 4.5 V to 5.5 V supply, the surrounding instrumentation should provide compatible CMOS levels and clean power. Use controlled-impedance routing, place receiver termination close to the LVDS input, and validate the complete channel with the intended clock rate and target trace length.
推薦
Communication and Control Modules
The DS90CR211MTD is useful for linking parallel control logic to another circuit section over a compact differential interface. Its 21-bit input width accommodates grouped command, status, or payload data, while the three LVDS streams reduce the number of single-ended traces crossing a potentially noisy board region. The phase-locked clock provides a dedicated timing signal for compatible receiver logic. Designers should establish the serialization mapping, validate clock polarity, and use the receiver manufacturer's termination network. A common 5 V supply is suitable because the transmitter's stated operating range is 4.5 V to 5.5 V.
推薦
Embedded Parallel-to-Serial Expansion
The DS90CR211MTD can serve as a parallel-to-serial expansion stage in an embedded system where a processor or programmable logic device exposes more data than can be routed economically as single-ended board traces. Grouping 21 bits into three LVDS lanes can improve routing scalability and noise immunity. The transmitted phase-locked clock supports compatible source-synchronous reception. The design must account for CMOS input timing, the transmitter's 4.5 V to 5.5 V operating range, and the receiver's expected clock-to-data arrangement. Differential impedance control and uninterrupted ground references are essential across the complete route.
推薦
High-Speed Digital Interconnect
The DS90CR211MTD is appropriate when a board requires a compact high-speed digital interconnect between functional blocks. Three balanced LVDS streams carry the serialized data, and the phase-locked clock supplies a separate differential timing path. This arrangement is useful where connector count, trace density, or susceptibility to common-mode noise matters. Place the transmitter close to the data source, keep the differential pairs length matched within the receiver's timing budget, and confirm the maximum data rate supported by the complete link. The 48-TSSOP footprint also requires adequate routing space for 21 data inputs and the associated power connections.
推薦
Medical and Monitoring Equipment
The DS90CR211MTD may be used inside medical or monitoring equipment for internal transfer of grouped digital data, subject to system-level safety, isolation, and environmental requirements. Its differential LVDS outputs can reduce sensitivity to internally generated noise compared with long single-ended routes, and the dedicated clock supports deterministic timing. The commercial temperature grade must be checked against the enclosure's actual ambient range, while the 4.5 V to 5.5 V supply requirement must be integrated into the power architecture. Use isolated boundaries where required and validate the complete interface rather than inferring compliance from the transmitter alone.
推薦
推薦產品摘要
工程參考資料,適用於 DS90CR211MTD — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | DS90CR211MTDX | DS90CR213MTDX | DS90CR561MTDX |
|---|---|---|---|---|
| Package | 48-TSSOP | 48-TSSOP | 48-TSSOP | 48-TSSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Supply Voltage | 4.5 V to 5.5 V | Up to 5.5 V | 5.5 V listed | 5.5 V listed |
| Protocol | LVDS | LVDS | LVDS | LVDS |
主要差異化特點
- Defines a 21-bit parallel-to-LVDS conversion function (對比DS90CR213MTDX)
- Includes a transmitted phase-locked clock (對比DS90CR561MTDX)
- Matches a broad conventional 5 V interface environment (對比DS90CR211MTDX)
設計說明
Route every LVDS output as a controlled-impedance differential pair with a continuous reference plane beneath it. Avoid changing layer geometry, adding test pads, or routing unrelated high-current paths beside the pairs. Keep the transmitter close to the data source and place receiver termination in accordance with the manufacturer application circuit. Differential pair length matching must be based on the receiver's permissible skew and clock-to-data timing rather than an arbitrary visual tolerance.
Do not select a candidate solely because it uses a 48-TSSOP package. DS90CR213MTDX and DS90CR561MTDX share the package family and appear in source-backed comparison listings, but their Channel Link data width, signal direction, and clock behavior may differ. Verify all 48 pin assignments, serialization format, output mapping, supply requirements, receiver compatibility, and termination before approving a substitution.
The DS90CR211MTD operates across a 4.5 V to 5.5 V supply range. Decouple the supply pins near the device with the capacitance and placement specified by the manufacturer datasheet, and provide a low-impedance return path for every signal and power connection. Avoid routing the transmitter's supply through digital return-current paths shared with switching circuitry. Validate the rail at the IC under the intended load and clocking condition rather than relying only on a measurement at the supply source.
合規資訊
The interface function is not an automotive qualification category. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation.