Texas Instruments

DS90CR211MTD - 21-Bit LVDS Transmitter | Texas Instruments

부품 번호: DS90CR211MTD ✓ 활성
4.5 V to 5.5 V Vdss 48-TSSOP, 0.240 inch width, 6.10 mm width Package Phase-locked transmit clock Speed
MOQ: 1 |

DS90CR211MTD 개요

The Texas Instruments DS90CR211MTD is a 21-bit LVDS transmitter interface IC with a 4.5 V to 5.5 V supply range in a 48-pin TSSOP package. It converts 21 CMOS/TTL input bits into three LVDS data streams and transmits a phase-locked clock, providing a compact solution for multi-bit serial links.

An LVDS transmitter is a specialized interface circuit that converts low-voltage CMOS or TTL signals into balanced differential data streams. Within the signal-chain hierarchy, it belongs to the LVDS interface family, differential line-driver class, and broader interface IC category. Balanced signaling improves noise immunity and enables reliable data transfer over longer printed-circuit-board traces than ordinary single-ended digital interfaces.

The DS90CR211MTD accepts 21 parallel data bits and serializes them into three differential LVDS lanes. It also forwards a phase-locked transmit clock, allowing the receiver to recover timing from the transmitted stream. The manufacturer describes the device as a 21-bit Channel Link transmitter, and its architecture is intended for transferring parallel digital data over a compact differential interface.

The operating supply range of 4.5 V to 5.5 V supports conventional 5 V interface environments. The 48-TSSOP package offers a relatively high pin count for a parallel-to-serial transmitter, accommodating the 21 data inputs, differential outputs, clock path, power connections, and control functions. Its rectangular surface-mount construction is suitable for automated assembly and multilayer PCB designs.

Typical uses include point-to-point digital backplanes, industrial control links, test and measurement equipment, communication modules, and embedded systems that need to move parallel data across a PCB without relying on a parallel bus. LVDS is especially useful when signal integrity, trace routing, or data-transfer distance becomes more important than connector pin count.

When laying out the transmitter, treat every differential pair as a controlled-impedance route and keep the LVDS outputs short and properly terminated according to the receiver implementation. Confirm the receiver's supported data format, clocking method, supply voltage, and termination before treating the DS90CR211MTD as a drop-in component in a new design.

This product page combines the manufacturer interface description with package information, practical PCB guidance, source-backed alternatives, and a parameter comparison designed to accelerate component selection and board-level integration.

드롭인 대체품: DS90CR211MTD — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: DS90CR211MTD (동일 폼 팩터 및 풋프린트) — 차이점: Input Data Width, Package, Packaging, Product Type.

Texas Instruments
Packaging: Tape & Reel (TR)
비교 대상: DS90CR211MTD →
Texas Instruments
Input Data Width: 21 bits of CMOS/TTL data
Package: 48-pin TSSOP (PDSO48)
Product Type: LVDS 18-bit color flat-panel-display link transmitter
비교 대상: DS90CR211MTD →

DS90CR211MTDX

✅ 드롭인
Texas Instruments
📦 48-TSSOP
Transmitter · LVDS · 1/0 · 4.5 V to 5.5 V · 48-TFSOP (0.240", 6.10mm Width) · 48 · 840 Mbps · 21 bits

가격 문의

데이터시트 보기 →

DS90CR213MTDX

✅ 드롭인
📦 48-TSSOP
Same 48-TSSOP footprint and listed 5.5 V, 840 Mbps class of operation, but the Channel Link data width and transmitter or receiver role differ from the 21-bit DS90CR211MTD

📋 참조 대체품 (카탈로그에 없음)

DS90CR561MTDX

✅ 드롭인
Texas Instruments
📦 48-TSSOP
LVDS 18-bit color flat-panel-display link transmitter · Texas Instruments · National Semiconductor · 21 bits of CMOS/TTL data · 18 bits · 3 LVDS data streams · 4 drivers · CMOS/TTL input and LVDS output

가격 문의

데이터시트 보기 →

DS90CR211MTD 사양

Product Type 21-bit LVDS transmitter
Input Data Width 21 bits
LVDS Output Streams 3 differential streams
Supply Voltage Range 4.5 V to 5.5 V
Logic Interface CMOS/TTL
Protocol LVDS
Clock Phase-locked transmit clock
패키지 48-TSSOP, 0.240 inch width, 6.10 mm width
실장 유형 Surface mount
Packaging Tube
Temperature Grade Commercial
Terminal Form Gull wing
Number of Terminals 48 terminals

DS90CR211MTD 48-tssop, 0.240 inch width, 6.10 mm width 핀 구성 가이드

DS90CR211MTD(48-tssop, 0.240 inch width, 6.10 mm width 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

DS90CR211MTD의 48-tssop, 0.240 inch width, 6.10 mm width 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: DS90CR211MTD.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

DS90CR211MTD 적합 용도: 6 애플리케이션s: Industrial Data Backplane, Test and Measurement Instrumentation, Communication and Control Modules, Embedded Parallel-to-Serial Expansion, High-Speed Digital Interconnect, Medical and Monitoring Equipment.

🏭

Industrial Data Backplane

The DS90CR211MTD is suitable for a point-to-point industrial backplane link that must transfer 21 parallel logic bits across a PCB. Its three LVDS differential streams provide a more noise-resistant physical layer than single-ended CMOS routing, while the transmitted phase-locked clock gives the receiver a dedicated timing reference. The transmitter operates from 4.5 V to 5.5 V, allowing it to share a conventional industrial 5 V power domain. During layout, maintain continuous reference-plane return paths beneath every pair, avoid splitting the ground plane, and confirm receiver termination requirements against the manufacturer application guidance.

🔧

Test and Measurement Instrumentation

The DS90CR211MTD can reduce parallel wiring between acquisition, processing, and output sections in test and measurement equipment. Serializing 21 bits into three balanced LVDS lanes can make long internal traces more manageable while preserving source-synchronous timing through the phase-locked transmit clock. Because the device uses a 4.5 V to 5.5 V supply, the surrounding instrumentation should provide compatible CMOS levels and clean power. Use controlled-impedance routing, place receiver termination close to the LVDS input, and validate the complete channel with the intended clock rate and target trace length.

🌐

Communication and Control Modules

The DS90CR211MTD is useful for linking parallel control logic to another circuit section over a compact differential interface. Its 21-bit input width accommodates grouped command, status, or payload data, while the three LVDS streams reduce the number of single-ended traces crossing a potentially noisy board region. The phase-locked clock provides a dedicated timing signal for compatible receiver logic. Designers should establish the serialization mapping, validate clock polarity, and use the receiver manufacturer's termination network. A common 5 V supply is suitable because the transmitter's stated operating range is 4.5 V to 5.5 V.

🧩

Embedded Parallel-to-Serial Expansion

The DS90CR211MTD can serve as a parallel-to-serial expansion stage in an embedded system where a processor or programmable logic device exposes more data than can be routed economically as single-ended board traces. Grouping 21 bits into three LVDS lanes can improve routing scalability and noise immunity. The transmitted phase-locked clock supports compatible source-synchronous reception. The design must account for CMOS input timing, the transmitter's 4.5 V to 5.5 V operating range, and the receiver's expected clock-to-data arrangement. Differential impedance control and uninterrupted ground references are essential across the complete route.

🖥️

High-Speed Digital Interconnect

The DS90CR211MTD is appropriate when a board requires a compact high-speed digital interconnect between functional blocks. Three balanced LVDS streams carry the serialized data, and the phase-locked clock supplies a separate differential timing path. This arrangement is useful where connector count, trace density, or susceptibility to common-mode noise matters. Place the transmitter close to the data source, keep the differential pairs length matched within the receiver's timing budget, and confirm the maximum data rate supported by the complete link. The 48-TSSOP footprint also requires adequate routing space for 21 data inputs and the associated power connections.

💊

Medical and Monitoring Equipment

The DS90CR211MTD may be used inside medical or monitoring equipment for internal transfer of grouped digital data, subject to system-level safety, isolation, and environmental requirements. Its differential LVDS outputs can reduce sensitivity to internally generated noise compared with long single-ended routes, and the dedicated clock supports deterministic timing. The commercial temperature grade must be checked against the enclosure's actual ambient range, while the 4.5 V to 5.5 V supply requirement must be integrated into the power architecture. Use isolated boundaries where required and validate the complete interface rather than inferring compliance from the transmitter alone.

What is the DS90CR211MTD?
The DS90CR211MTD is a 21-bit LVDS transmitter from Texas Instruments. According to the manufacturer datasheet, it converts 21 CMOS or TTL input bits into three LVDS differential data streams and transmits a phase-locked clock. The device is supplied in a 48-pin TSSOP package and operates from a 4.5 V to 5.5 V supply, making it suitable for compact, high-speed digital interface designs.
How many LVDS data streams does DS90CR211MTD transmit?
The DS90CR211MTD transmits three LVDS differential data streams. According to the Texas Instruments manufacturer datasheet, these streams carry the 21 parallel CMOS or TTL input bits after serialization. The same device also transmits a phase-locked clock, providing the receiving endpoint with a dedicated differential clock signal rather than requiring a separate source-synchronous clock connection.
What is the supply voltage of DS90CR211MTD?
The DS90CR211MTD operates from 4.5 V to 5.5 V. This range is identified in the Texas Instruments manufacturer datasheet and the published product description. Both the CMOS input circuitry and the LVDS output stages are therefore associated with a conventional 5 V interface environment. A system should maintain the supply within this range across temperature and noise conditions.
What package does DS90CR211MTD use?
The DS90CR211MTD uses a 48-pin TSSOP package with gull-wing leads. Published package information identifies a body width of 0.240 inch, or 6.10 mm, and surface-mount construction. The manufacturer datasheet remains the controlling document for land-pattern dimensions, lead pitch, pin orientation, exposed-pad information, and recommended PCB land geometry.
Where can I find the DS90CR211MTD pinout?
The DS90CR211MTD pinout is located in the pin-configuration section of the Texas Instruments manufacturer datasheet. Use that table when assigning all 48 TSSOP terminals and when tracing the 21 data inputs, differential LVDS outputs, supply rails, ground connections, and clock pins. The package drawing should also be checked for the exact pin-1 marker and the device's recommended board footprint.
Where can I download the DS90CR211MTD datasheet PDF?
The official DS90CR211MTD datasheet PDF is available from Texas Instruments at the manufacturer link associated with this product. It contains the authoritative pin configuration, electrical characteristics, LVDS output information, application circuit, and recommended PCB layout guidance. Use the manufacturer PDF as the primary design reference and consult it alongside the receiver datasheet when selecting termination and clock-routing details.
Is DS90CR211MTD suitable for industrial control systems?
The DS90CR211MTD can fit industrial control links when the board-level environment is compatible with its commercial temperature grade and 4.5 V to 5.5 V supply range. Its three LVDS differential outputs support noise-resistant data transfer between circuit sections. Industrial suitability still requires checking temperature limits, isolation requirements, electromagnetic conditions, and the electrical rating of the receiving interface.
Can DS90CR211MTD transmit a clock to the receiver?
Yes, the DS90CR211MTD includes a phase-locked transmit clock output. According to the Texas Instruments manufacturer datasheet, this clock is transmitted alongside the three LVDS data streams. The receiver can therefore recover the associated timing from the differential interface, provided its data format and clock architecture are compatible with the transmitter.
What is the best drop-in replacement for DS90CR211MTD?
The closest source-backed replacement is the DS90CR211MTDX, which uses the same 48-pin TSSOP format and identifies the same 5.5 V and 840 Mbps class of operation. Its X suffix identifies a different ordering or shipping format, so engineers should confirm stock format, marking, temperature grade, and all pin assignments against the manufacturer datasheet before treating it as a literal board-for-board substitution.
What can replace DS90CR211MTD on the same 48-TSSOP footprint?
The DS90CR211MTDX is the closest same-family board candidate because it retains the 48-pin TSSOP construction and the same transmitter function. The source-backed cross-reference results also mention DS90CR213MTDX and DS90CR561MTDX as package-consistent alternatives, but their data widths differ. They should not be treated as unconditional pin-to-pin replacements without a complete signal-format and pin-function comparison.
What is the difference between DS90CR211MTD and DS90CR213MTD?
The DS90CR211MTD is identified as a 21-bit LVDS transmitter, whereas the DS90CR213MTD belongs to a different Channel Link function and data width. Both family members are available in a 48-TSSOP format, but a common package does not automatically guarantee interchangeable data, clock, and control behavior. Verify the transmitter versus receiver direction, lane count, serialization format, and pin assignments before substituting either part.
When should I choose DS90CR211MTD over DS90CR213MTD?
Choose the DS90CR211MTD when the design requires a 21-bit CMOS/TTL-to-three-LVDS-stream transmitter with a transmitted phase-locked clock. Choose a receiver-oriented family member only when the board architecture and receiver requirements match that device. The decisive checks are signal direction, number of data lanes, clock implementation, supply range, and exact 48-pin assignment rather than package appearance alone.
Is DS90CR211MTD the same as DS90CR213MTDX?
No. The DS90CR211MTD is a 21-bit transmitter, while DS90CR213MTDX represents a different Channel Link variant. Their shared 48-TSSOP packaging makes them candidates for a board-level investigation, but the manufacturer datasheets must be compared to confirm whether the data direction, bit width, clock pins, output mapping, and control functions are compatible.
Where can I buy DS90CR211MTD and check current availability?
Current commercial availability for the DS90CR211MTD should be confirmed through the Request a Quote form on this page. The form allows an engineer to specify the required package or shipping format, quantity, and target delivery timing without relying on a static price or inventory claim. Confirm the manufacturer ordering information before placing a production order.
What is the lead time for DS90CR211MTD?
The current lead time for the DS90CR211MTD depends on order quantity, requested shipping format, manufacturing status, and current factory allocation. Submit a request through the Request a Quote form on this page with the required quantity and delivery target. The purchasing team can then confirm the latest lead time and available shipment options for the exact ordering code.
What price is DS90CR211MTD?
Use the Request a Quote form on this page for the current DS90CR211MTD commercial quotation. Pricing can depend on quantity, order format, component condition, and supply availability, so a static figure can become obsolete quickly. The quote request also allows the required shipment format and target quantity to be stated clearly to the purchasing team.
What are the key specifications of DS90CR211MTD that engineers should know?
The key DS90CR211MTD specifications are a 21-bit parallel input, three LVDS differential output streams, a transmitted phase-locked clock, a 4.5 V to 5.5 V supply range, and a 48-pin TSSOP package. According to the Texas Instruments manufacturer datasheet, the transmitter accepts CMOS or TTL logic and serializes the parallel data for a compact differential link between circuit sections.

엔지니어링 참조 데이터: DS90CR211MTD — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the DS90CR211MTD when the system needs a 21-bit CMOS/TTL transmitter, three LVDS data lanes, and a transmitted phase-locked clock in a 48-TSSOP package. Select DS90CR211MTDX when the function is unchanged and the alternate ordering or shipment format is preferable, after confirming its full ordering details and electrical specifications. Consider DS90CR213MTDX only when its data direction, width, clocking, and all terminal assignments match the target board. Consider DS90CR561MTDX only after confirming that the larger Channel Link format is compatible with the existing receiver and serialization design. In every case, package equality is necessary but insufficient; validate signal function, clock topology, supply range, termination, and the complete manufacturer pinout before release to production.

대체품과의 비교

파라미터 이 제품 DS90CR211MTDX DS90CR213MTDX DS90CR561MTDX
Package 48-TSSOP 48-TSSOP 48-TSSOP 48-TSSOP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Supply Voltage 4.5 V to 5.5 V Up to 5.5 V 5.5 V listed 5.5 V listed
Protocol LVDS LVDS LVDS LVDS

주요 차별점

  • Defines a 21-bit parallel-to-LVDS conversion function (vs DS90CR213MTDX)
  • Includes a transmitted phase-locked clock (vs DS90CR561MTDX)
  • Matches a broad conventional 5 V interface environment (vs DS90CR211MTDX)

설계 노트

Route every LVDS output as a controlled-impedance differential pair with a continuous reference plane beneath it. Avoid changing layer geometry, adding test pads, or routing unrelated high-current paths beside the pairs. Keep the transmitter close to the data source and place receiver termination in accordance with the manufacturer application circuit. Differential pair length matching must be based on the receiver's permissible skew and clock-to-data timing rather than an arbitrary visual tolerance.

Do not select a candidate solely because it uses a 48-TSSOP package. DS90CR213MTDX and DS90CR561MTDX share the package family and appear in source-backed comparison listings, but their Channel Link data width, signal direction, and clock behavior may differ. Verify all 48 pin assignments, serialization format, output mapping, supply requirements, receiver compatibility, and termination before approving a substitution.

The DS90CR211MTD operates across a 4.5 V to 5.5 V supply range. Decouple the supply pins near the device with the capacitance and placement specified by the manufacturer datasheet, and provide a low-impedance return path for every signal and power connection. Avoid routing the transmitter's supply through digital return-current paths shared with switching circuitry. Validate the rail at the IC under the intended load and clocking condition rather than relying only on a measurement at the supply source.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The interface function is not an automotive qualification category. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation.

데이터 검증일: 2026-11-10 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

DS90CR211MTD DS90CR211MTD datasheet DS90CR211MTD datasheet pdf DS90CR211MTD pinout DS90CR211MTD specifications DS90CR211MTD equivalent DS90CR211MTD replacement DS90CR211MTD cross reference DS90CR211MTD vs DS90CR213MTDX DS90CR211MTD footprint DS90CR211MTD price DS90CR211MTD stock Texas Instruments DS90CR211MTD DS90CR211 48-TSSOP pinout DS90CR211 21-bit LVDS transmitter

관련 부품 & 용어

Texas Instruments DS90CR211MTD DS90CR211MTDX DS90CR213MTDX DS90CR561MTDX DS90CR213MTD DS90CF562MTD DS90C387VJD-TI LVDS Low Voltage Differential Signaling Channel Link LVDS transmitter line driver interface IC semiconductor CMOS TTL phase-locked transmit clock 48-TSSOP TSSOP package family surface-mount package SMD industrial backplane test and measurement instrumentation source-synchronous clock
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기