Silicon Labs

EFM32TG840F8-D-QFN64R - 32MHz Cortex-M3 MCU | Silicon Labs (Tape & Reel)

MPN: EFM32TG840F8-D-QFN64R ✓ Nakahanda
64-QFN, 9 x 9 mm Package 32 MHz Speed 8 kB Memory
MOQ: 1 |

EFM32TG840F8-D-QFN64R Ulas

Silicon Labs EFM32TG840F8-D-QFN64R is a 32-bit ARM Cortex-M3 microcontroller rated up to 32 MHz, with 8 kB Flash memory, 2 kB RAM, and 56 digital I/O pins in a 64-QFN package. Its compact 9 x 9 mm footprint supports energy-conscious embedded systems where board area, processing performance, and low-power operation are important.

A microcontroller is a programmable semiconductor that integrates a CPU, memory, peripherals, and I/O into one device. The EFM32 Tiny Gecko family belongs to the broader 32-bit MCU and embedded-processor hierarchy. By combining an ARM Cortex-M3 core with energy-saving modes and fast wake-up behavior, the platform supports systems that spend substantial time in low-energy states while retaining deterministic control and communication functions.

The EFM32TG840F8-D-QFN64R provides 8 kB of Flash for firmware, 2 kB of RAM for working data, 56 digital I/O pins, and two 16-bit timers. Its 32 MHz operating speed is suitable for sensor aggregation, low-power control, communications, and compact embedded-control tasks. The low-power architecture is particularly useful in battery-operated products where active processing time and sleep current directly affect service life.

The device uses an ARM Cortex-M3 processor and combines two 16-bit timers with flexible GPIO resources for sensor, actuator, and communication interfaces. The manufacturer describes fast wake-up operation and energy-saving modes as central platform features. These characteristics allow firmware to remain responsive while minimizing unnecessary processor activity during idle intervals, although final energy consumption depends on the complete application, clock configuration, and peripherals enabled.

Typical uses include low-power sensor nodes, industrial condition-monitoring equipment, connected instrumentation, compact environmental controls, and embedded accessories. The 56 I/O pins provide sufficient parallel connectivity for digital sensors, indicators, switches, and peripheral buses. The 8 kB Flash and 2 kB RAM are best suited to compact control loops and protocol stacks rather than storage-intensive, graphics-heavy, or large connectivity workloads.

PCB designers should reserve the exposed-pad thermal and electrical connection specified by the manufacturer and place decoupling capacitors close to the supply pins. Keep sensitive analog and communication routes away from fast-switching nodes, follow the reference layout for the selected QFN land pattern, and verify wake-up, reset, and peripheral-routing behavior on the assembled board.

This page organizes the device specifications, verified sourcing information, drop-in alternatives, application guidance, and practical PCB considerations. For a replacement decision, compare Flash, RAM, peripheral configuration, package land pattern, temperature grade, and software support rather than relying on the EFM32 or Tiny Gecko family name alone.

Mga alternatibo na pwedeng ilagay na EFM32TG840F8-D-QFN64R — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok EFM32TG840F8-D-QFN64R (parehas na form factor at footprint) — pagkakaiba sa Digital I/O Pins, Flash Memory, Package, Product Type, RAM Memory.

Silicon Labs
Digital I/O Pins: 56
Flash Memory: 32 KB (32K x 8)
Package: 64-QFN (9 x 9 mm)
Ikabit sa EFM32TG840F8-D-QFN64R →

EFM32TG840F32-QFN64

✅ Drop-In
Silicon Labs
📦 64-QFN (9 x 9 mm)
ARM Cortex-M3 Tiny Gecko Microcontroller · ARM Cortex-M3 · 32-bit · 32 MHz · 32 KB (32K x 8) · 4 KB · 56 · 2 x 16-bit timers

Magkontak para sa presyo

Tingnan ang Datasheet →

EFM32TG840F8-D-QFN64R Mga Pinakamataas na Rating at Electrical Characteristics

Product Type 32-bit ARM Cortex-M3 microcontroller
Maximum CPU Frequency 32 MHz
Flash Memory 8 kB
RAM Memory 2 kB
Digital I/O Pins 56 pins
Timer Count 2 timers
Timer Resolution 16-bit per timer
CPU Architecture ARM Cortex-M3
Packhaging 64-QFN, 9 x 9 mm
Uri ng Pagpapasok Surface mount
Low-Power Modes Energy-saving modes with fast wake-up

Gabay sa Pin Configuration ng EFM32TG840F8-D-QFN64R 64-qfn, 9 x 9 mm

Pin configuration para sa EFM32TG840F8-D-QFN64R (64-qfn, 9 x 9 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 64-qfn, 9 x 9 mm package para sa EFM32TG840F8-D-QFN64R

Wala ng detalyadong pinout data na magagamit para sa EFM32TG840F8-D-QFN64R.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

EFM32TG840F8-D-QFN64R ay nararapat para sa 6 aplikasyons: Battery-Powered Sensor Nodes, Industrial Condition Monitoring, Environmental Control Systems, Connected Instrumentation, Compact Motor and Actuator Control, Portable Medical Accessories.

🧩

Battery-Powered Sensor Nodes

The EFM32TG840F8-D-QFN64R fits compact battery-powered sensor nodes that periodically measure a physical quantity and remain idle between samples. Its 32 MHz ARM Cortex-M3 core can handle filtering, calibration, and local control, while Silicon Labs highlights energy-saving modes and fast wake-up behavior for reducing unnecessary active time. The 8 kB Flash and 2 kB RAM provide space for a small application and data handling, but firmware should avoid unnecessary buffering. Its 56 digital I/O pins support digital sensors, status indicators, and low-speed peripheral connections.

🏭

Industrial Condition Monitoring

The EFM32TG840F8-D-QFN64R is appropriate for industrial condition-monitoring equipment that must combine timed acquisition with compact control logic. Its two 16-bit timers support periodic sampling and event timing, while the 32 MHz Cortex-M3 processor can perform threshold evaluation and data preparation. The 56 digital I/O pins provide parallel connections for sensors, alarm outputs, and status signaling. The 9 x 9 mm QFN64 package supports compact controller boards, although industrial temperature, isolation, and EMC requirements must be confirmed separately for the exact ordering code.

🏠

Environmental Control Systems

The EFM32TG840F8-D-QFN64R can serve as the controller in small environmental-control products such as fan controllers, thermal regulators, and compact building-control nodes. The 32 MHz ARM Cortex-M3 core supports proportional control logic and scheduled communication tasks, and the two 16-bit timers provide repeatable timing for control loops. Its low-power architecture is useful when the system spends extended periods idle between commands or sensor readings. The limited 8 kB Flash and 2 kB RAM favor lean control firmware with external storage reserved for logs or complex user interfaces.

🌐

Connected Instrumentation

The EFM32TG840F8-D-QFN64R is useful in compact connected instruments that combine local measurements, control, and a communications interface. Its 32 MHz processor provides enough performance for protocol handling and instrument housekeeping, while 56 digital I/O pins support front-panel controls, indicators, and peripheral connections. The device's energy-saving modes can reduce consumption between commands or remote updates. Firmware capacity should be checked carefully because networking stacks and security features can consume the available 8 kB Flash and 2 kB RAM quickly.

⚡

Compact Motor and Actuator Control

The EFM32TG840F8-D-QFN64R can control small actuators in battery-powered equipment where a 32-bit MCU, timers, and moderate I/O density are useful in a limited board area. Its two 16-bit timers support timing functions, while 56 digital I/O pins allow control signals, limit inputs, and status outputs to be connected without a large package. The low-power platform is beneficial in portable tools and appliances that spend much of their operating cycle idle. Final motor-drive designs require separate drivers because the MCU is a controller rather than a direct high-current power stage.

💊

Portable Medical Accessories

The EFM32TG840F8-D-QFN64R can serve as the control core in compact medical accessories that coordinate sensor readings, indicators, and a low-power user interface. Its 32 MHz Cortex-M3 performance supports responsive control logic, and the two 16-bit timers are useful for periodic measurement and alert timing. The compact QFN64 package helps reduce board size, while low-power modes suit battery-operated products. Medical use also requires application-specific electrical safety, EMC, validation, and regulatory checks beyond the MCU's electrical and environmental specifications.

What are the key specifications of EFM32TG840F8-D-QFN64R that engineers should know?
The EFM32TG840F8-D-QFN64R combines a 32 MHz ARM Cortex-M3 core with 8 kB Flash, 2 kB RAM, 56 digital I/O pins, and two 16-bit timers in a 64-QFN package. According to the Silicon Labs device page, the MCU also provides low-power operating techniques, energy-saving modes, and fast wake-up behavior. These characteristics make the part suitable for compact control systems, sensor nodes, instrumentation, and battery-operated equipment where the 9 x 9 mm package and low-power architecture matter as much as processing speed.
What is EFM32TG840F8-D-QFN64R used for?
The EFM32TG840F8-D-QFN64R is used for compact embedded control, sensing, monitoring, and communications systems. Its 32 MHz ARM Cortex-M3 core handles general-purpose processing, while 8 kB Flash stores firmware and 2 kB RAM holds working data. The 56 digital I/O pins and two 16-bit timers support sensors, switches, indicators, and timing functions. According to Silicon Labs, its energy-saving modes and fast wake-up behavior are particularly useful in battery-operated and energy-sensitive products.
How much Flash and RAM does EFM32TG840F8-D-QFN64R have?
The EFM32TG840F8-D-QFN64R contains 8 kB of Flash memory and 2 kB of RAM. The Silicon Labs product specification identifies the Flash as 8K x 8 and the RAM as 2K x 8. These capacities are appropriate for compact firmware, low-complexity control loops, and lightweight protocol handling. Designers should estimate the combined code, constants, stack, and working-data requirements before committing to this memory configuration for a larger application.
What is the maximum operating speed of EFM32TG840F8-D-QFN64R?
The EFM32TG840F8-D-QFN64R operates at up to 32 MHz using its ARM Cortex-M3 processor. According to the Silicon Labs device page, the MCU is built around a low-power platform with fast wake-up times and energy-saving modes. The 32 MHz maximum should not be interpreted as a requirement to run continuously at full speed; clock and peripheral configurations can be adjusted to balance response time, power consumption, and application performance.
Where can I download the EFM32TG840F8-D-QFN64R datasheet PDF?
The primary technical entry point for the EFM32TG840F8-D-QFN64R is the Silicon Labs device page, which links to the product specifications and documentation. A manufacturer-family datasheet PDF is also indexed at the Keil documentation URL listed on this page. Use the Silicon Labs page as the authoritative source for revisions and product-page updates, and consult the pin-description table in the manufacturer datasheet before assigning PCB tracks or power connections.
Where is the EFM32TG840F8-D-QFN64R pinout located?
The EFM32TG840F8-D-QFN64R pinout is documented in the pinout figure and device pinout table of the Silicon Labs EFM32TG840 family datasheet. The package is a 64-QFN measuring 9 x 9 mm with an exposed pad. Use the manufacturer pin-description table to verify alternate functions, supply pins, ground connections, analog signals, and exposed-pad requirements. Do not assign PCB connections from a generic QFN drawing because alternate functions and exposed-pad treatment are device-specific.
Is EFM32TG840F8-D-QFN64R suitable for low-power battery applications?
Yes, the EFM32TG840F8-D-QFN64R is suitable for low-power battery applications when firmware uses its energy-saving modes and fast wake-up capability effectively. Silicon Labs describes the Tiny Gecko platform as intended for energy-sensitive systems. Actual battery life depends on sleep duration, wake-up frequency, active peripherals, operating voltage, and sensor load, so evaluate the complete firmware workload rather than estimating runtime from processor frequency alone.
What can replace EFM32TG840F8-D-QFN64R?
The closest verified drop-in alternative is EFM32TG840F32-QFN64, which uses the same QFN64 family platform and Cortex-M3 architecture but increases Flash from 8 kB to 32 kB and RAM from 2 kB to 4 kB. Because memory capacity and pin multiplexing can affect firmware and board configuration, review the complete device pinout and peripheral table before substitution. No verified cross-brand, pin-to-pin MCU replacement was identified for this exact device.
Is EFM32TG840F8-D-QFN64R the same as EFM32TG840F32-QFN64?
No, the EFM32TG840F8-D-QFN64R and EFM32TG840F32-QFN64 differ in memory capacity. The target has 8 kB Flash and 2 kB RAM, while the F32 variant has 32 kB Flash and 4 kB RAM. Both use the ARM Cortex-M3 Tiny Gecko platform, run up to 32 MHz, provide 56 digital I/O pins, and use a QFN64 package. They are closely related family members, but the larger-memory device requires appropriate firmware and pin-function review.
EFM32TG840F8-D-QFN64R vs EFM32TG840F32-QFN64 — which is better for firmware-heavy applications?
The EFM32TG840F32-QFN64 is the better choice for firmware-heavy applications because it provides 32 kB Flash and 4 kB RAM, compared with 8 kB Flash and 2 kB RAM in the target. Both devices use the same 32 MHz Cortex-M3 Tiny Gecko architecture and are packaged in QFN64. According to the Silicon Labs product pages, the F32 variant offers four times the Flash and twice the RAM, reducing pressure on code and working-memory capacity.
When should I choose EFM32TG840F8-D-QFN64R over EFM32TG840F32-QFN64?
Choose EFM32TG840F8-D-QFN64R when its 8 kB Flash and 2 kB RAM are sufficient and the design benefits from the smaller memory configuration. Its 32 MHz Cortex-M3 core, 56 digital I/O pins, and low-power features remain suitable for compact control and sensing products. Select EFM32TG840F32-QFN64 when firmware, libraries, buffers, or protocol stacks require 32 kB Flash and 4 kB RAM. Validate the final memory budget and boot behavior for either choice.
Is EFM32TG840F8-D-QFN64R suitable for industrial and environmental monitoring systems?
The EFM32TG840F8-D-QFN64R is suitable for compact environmental monitoring systems that use low-power sensing, timed sampling, and limited local processing. Its 32 MHz core provides useful control performance, while two 16-bit timers and 56 digital I/O pins support sensors and peripheral devices. Silicon Labs highlights energy-saving modes and fast wake-up behavior, which help systems remain between intermittent measurements. The 8 kB Flash and 2 kB RAM require careful firmware sizing.
What is the best cross-brand equivalent for EFM32TG840F8-D-QFN64R?
No cross-brand drop-in equivalent has been established for the EFM32TG840F8-D-QFN64R. A true replacement must match the 64-QFN land pattern, provide 56 usable digital I/O pins, operate up to 32 MHz, and offer compatible peripheral mappings, supply connections, and software support. General-purpose Cortex-M3 MCUs from other manufacturers may provide similar application capability, but they cannot be treated as drop-in replacements without a verified pin-by-pin comparison and board-level validation.
Where can I buy EFM32TG840F8-D-QFN64R and what is its price?
Use the Request a Quote form on this page to ask about EFM32TG840F8-D-QFN64R pricing, stock, order quantity, and lead time. The device is identified as an ARM Cortex-M3 Tiny Gecko MCU with 8 kB Flash, 2 kB RAM, 56 digital I/O pins, a 32 MHz maximum operating speed, and a 64-QFN package. The quote process provides current commercial terms without embedding a potentially stale price into technical documentation.
What is the lead time and stock status for EFM32TG840F8-D-QFN64R?
Current stock and lead time for EFM32TG840F8-D-QFN64R should be requested through the Request a Quote form on this page. The device is specified as a 64-QFN, 9 x 9 mm Cortex-M3 MCU with 8 kB Flash and 2 kB RAM. When requesting a quotation, include the required quantity, target date, reel or tray preference, and any temperature-grade or marking requirements so the supply response can reflect the exact production configuration.
Does EFM32TG840F8-D-QFN64R meet RoHS and REACH requirements?
The RoHS and REACH status of EFM32TG840F8-D-QFN64R should be confirmed against the current Silicon Labs product documentation and declaration for the exact ordering code. The manufacturer device page identifies the MCU and its electrical configuration, while compliance declarations can change as documentation is revised. Request the current material-compliance documentation through the quotation process for production qualification, and do not infer regulatory status solely from the package type or manufacturer name.

Impormasyon ng Talumpati sa Engineering for EFM32TG840F8-D-QFN64R — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose EFM32TG840F8-D-QFN64R for compact embedded systems where 8 kB Flash and 2 kB RAM are sufficient, the application benefits from a 32 MHz ARM Cortex-M3 core, and low-power operation is important. Its 56 digital I/O pins and two 16-bit timers make it suitable for sensing, condition monitoring, compact controls, and portable accessories. Select EFM32TG840F32-QFN64 when firmware size or working-memory requirements exceed the target: it provides four times the Flash and twice the RAM within the related QFN64 family. No verified cross-brand drop-in replacement is available, and a different manufacturer's Cortex-M3 MCU should not be treated as interchangeable without a complete pin, electrical, peripheral, and software comparison.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto EFM32TG840F32-QFN64
Brand Silicon Labs Silicon Labs
Package 64-QFN (9 x 9 mm) 64-QFN (9 x 9 mm)
CPU Core ARM Cortex-M3 ARM Cortex-M3
Maximum CPU Frequency 32 MHz 32 MHz
Flash Memory 8 kB 32 kB
RAM Memory 2 kB 4 kB
Digital I/O Pins 56 pins 56 pins
Timers 2 x 16-bit timers 2 x 16-bit timers
Low-Power Features Energy-saving modes and fast wake-up Energy-saving modes and fast wake-up

Pangunahing mga Pagkakaiba

  • Lower-memory option within the same Tiny Gecko QFN64 family (kumpara saEFM32TG840F32-QFN64)
  • Same processing performance and I/O count as the verified family alternative (kumpara saEFM32TG840F32-QFN64)
  • Matched package family for controlled PCB reuse (kumpara saEFM32TG840F32-QFN64)

Talaan ng Disenyo

Use the manufacturer QFN64 land pattern and preserve the exposed-pad connection exactly as specified in the device documentation. Place input and bulk decoupling capacitors close to their associated supply pins, with short and low-inductance return paths to the ground plane. The exposed pad must be connected according to the recommended PCB stack-up and thermal design; it is not an optional mechanical feature.

Keep analog inputs, external oscillator connections, and communication signals away from noisy or fast-switching nets. Route the exposed-pad connections with minimal interruption where the land pattern permits, and maintain continuous ground planes beneath and around the MCU. Verify alternate-function routing for all 56 digital I/O pins in the manufacturer pinout table before assigning fixed PCB functions.

Do not treat the -D ordering suffix as a functional upgrade or use it to infer different electrical ratings; confirm the production part number against the current manufacturer ordering guide. Also avoid treating EFM32TG840F32-QFN64 as an exact equivalent: it increases Flash to 32 kB and RAM to 4 kB. Although the package and core are closely related, boot configuration, peripheral availability, and firmware assumptions must be reviewed before substitution.

Estimate the average power budget from active time, sleep time, clock frequency, and enabled peripherals rather than from the 32 MHz maximum alone. Low-power performance depends on whether the application uses the MCU's energy-saving modes consistently. For the exposed-pad thermal path, use the package dimensions and board construction specified by Silicon Labs; generic package assumptions may produce an inaccurate junction-temperature estimate.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

Compliance declarations for the exact ordering code must be confirmed in current Silicon Labs documentation. AEC-Q100 status is not stated for this microcontroller.

Kaugnay na Hanapin

EFM32TG840F8-D-QFN64R datasheet EFM32TG840F8-D-QFN64R pinout EFM32TG840F8-D-QFN64R specifications EFM32TG840F8-D-QFN64R equivalent EFM32TG840F8-D-QFN64R replacement EFM32TG840F8-D-QFN64R price EFM32TG840F8-D-QFN64R stock Silicon Labs EFM32TG840F8-D-QFN64R EFM32TG840F8 64-QFN Cortex-M3 EFM32TG840F8-D-QFN64R vs EFM32TG840F32-QFN64 EFM32TG840F8-D-QFN64R low power EFM32TG840F8-D-QFN64R 32 MHz 8 kB

Mga kaugnay na Mga Komponente at mga Tuntunin

Silicon Labs EFM32TG840F8-D-QFN64R EFM32TG840F32-QFN64 ARM Cortex-M3 ARM EFM32 Tiny Gecko microcontroller MCU 32-bit microcontroller embedded processor semiconductor low-power microcontroller energy-saving mode fast wake-up Flash memory RAM GPIO 16-bit timer QFN64 9 x 9 mm QFN surface mount sensor node condition monitoring battery-powered control RoHS REACH
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ