EFM32TG840F8-D-QFN64R - 32MHz Cortex-M3 MCU | Silicon Labs (Tape & Reel)
MPN: EFM32TG840F8-D-QFN64R ✓ Hoạt độngEFM32TG840F8-D-QFN64R Tóm tắt
A microcontroller is a programmable semiconductor that integrates a CPU, memory, peripherals, and I/O into one device. The EFM32 Tiny Gecko family belongs to the broader 32-bit MCU and embedded-processor hierarchy. By combining an ARM Cortex-M3 core with energy-saving modes and fast wake-up behavior, the platform supports systems that spend substantial time in low-energy states while retaining deterministic control and communication functions.
The EFM32TG840F8-D-QFN64R provides 8 kB of Flash for firmware, 2 kB of RAM for working data, 56 digital I/O pins, and two 16-bit timers. Its 32 MHz operating speed is suitable for sensor aggregation, low-power control, communications, and compact embedded-control tasks. The low-power architecture is particularly useful in battery-operated products where active processing time and sleep current directly affect service life.
The device uses an ARM Cortex-M3 processor and combines two 16-bit timers with flexible GPIO resources for sensor, actuator, and communication interfaces. The manufacturer describes fast wake-up operation and energy-saving modes as central platform features. These characteristics allow firmware to remain responsive while minimizing unnecessary processor activity during idle intervals, although final energy consumption depends on the complete application, clock configuration, and peripherals enabled.
Typical uses include low-power sensor nodes, industrial condition-monitoring equipment, connected instrumentation, compact environmental controls, and embedded accessories. The 56 I/O pins provide sufficient parallel connectivity for digital sensors, indicators, switches, and peripheral buses. The 8 kB Flash and 2 kB RAM are best suited to compact control loops and protocol stacks rather than storage-intensive, graphics-heavy, or large connectivity workloads.
PCB designers should reserve the exposed-pad thermal and electrical connection specified by the manufacturer and place decoupling capacitors close to the supply pins. Keep sensitive analog and communication routes away from fast-switching nodes, follow the reference layout for the selected QFN land pattern, and verify wake-up, reset, and peripheral-routing behavior on the assembled board.
This page organizes the device specifications, verified sourcing information, drop-in alternatives, application guidance, and practical PCB considerations. For a replacement decision, compare Flash, RAM, peripheral configuration, package land pattern, temperature grade, and software support rather than relying on the EFM32 or Tiny Gecko family name alone.
Bộ thay thế dễ dàng lắp đặt cho EFM32TG840F8-D-QFN64R — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EFM32TG840F8-D-QFN64R (cùng hình factor và footprint) — khác nhau ở Digital I/O Pins, Flash Memory, Package, Product Type, RAM Memory.
EFM32TG840F32-QFN64
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EFM32TG840F8-D-QFN64R Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 8 kB |
| RAM Memory | 2 kB |
| Digital I/O Pins | 56 pins |
| Timer Count | 2 timers |
| Timer Resolution | 16-bit per timer |
| CPU Architecture | ARM Cortex-M3 |
| Hộp | 64-QFN, 9 x 9 mm |
| Kiểu lắp đặt | Surface mount |
| Low-Power Modes | Energy-saving modes with fast wake-up |
Hướng dẫn cấu hình chân EFM32TG840F8-D-QFN64R 64-qfn, 9 x 9 mm
Cấu hình chân cho EFM32TG840F8-D-QFN64R (64-qfn, 9 x 9 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho EFM32TG840F8-D-QFN64R.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
EFM32TG840F8-D-QFN64R phù hợp cho 6 Áp dụngs: Battery-Powered Sensor Nodes, Industrial Condition Monitoring, Environmental Control Systems, Connected Instrumentation, Compact Motor and Actuator Control, Portable Medical Accessories.
Battery-Powered Sensor Nodes
The EFM32TG840F8-D-QFN64R fits compact battery-powered sensor nodes that periodically measure a physical quantity and remain idle between samples. Its 32 MHz ARM Cortex-M3 core can handle filtering, calibration, and local control, while Silicon Labs highlights energy-saving modes and fast wake-up behavior for reducing unnecessary active time. The 8 kB Flash and 2 kB RAM provide space for a small application and data handling, but firmware should avoid unnecessary buffering. Its 56 digital I/O pins support digital sensors, status indicators, and low-speed peripheral connections.
Được đề xuất
Industrial Condition Monitoring
The EFM32TG840F8-D-QFN64R is appropriate for industrial condition-monitoring equipment that must combine timed acquisition with compact control logic. Its two 16-bit timers support periodic sampling and event timing, while the 32 MHz Cortex-M3 processor can perform threshold evaluation and data preparation. The 56 digital I/O pins provide parallel connections for sensors, alarm outputs, and status signaling. The 9 x 9 mm QFN64 package supports compact controller boards, although industrial temperature, isolation, and EMC requirements must be confirmed separately for the exact ordering code.
Được đề xuất
Environmental Control Systems
The EFM32TG840F8-D-QFN64R can serve as the controller in small environmental-control products such as fan controllers, thermal regulators, and compact building-control nodes. The 32 MHz ARM Cortex-M3 core supports proportional control logic and scheduled communication tasks, and the two 16-bit timers provide repeatable timing for control loops. Its low-power architecture is useful when the system spends extended periods idle between commands or sensor readings. The limited 8 kB Flash and 2 kB RAM favor lean control firmware with external storage reserved for logs or complex user interfaces.
Được đề xuất
Connected Instrumentation
The EFM32TG840F8-D-QFN64R is useful in compact connected instruments that combine local measurements, control, and a communications interface. Its 32 MHz processor provides enough performance for protocol handling and instrument housekeeping, while 56 digital I/O pins support front-panel controls, indicators, and peripheral connections. The device's energy-saving modes can reduce consumption between commands or remote updates. Firmware capacity should be checked carefully because networking stacks and security features can consume the available 8 kB Flash and 2 kB RAM quickly.
Được đề xuất
Compact Motor and Actuator Control
The EFM32TG840F8-D-QFN64R can control small actuators in battery-powered equipment where a 32-bit MCU, timers, and moderate I/O density are useful in a limited board area. Its two 16-bit timers support timing functions, while 56 digital I/O pins allow control signals, limit inputs, and status outputs to be connected without a large package. The low-power platform is beneficial in portable tools and appliances that spend much of their operating cycle idle. Final motor-drive designs require separate drivers because the MCU is a controller rather than a direct high-current power stage.
Được đề xuất
Portable Medical Accessories
The EFM32TG840F8-D-QFN64R can serve as the control core in compact medical accessories that coordinate sensor readings, indicators, and a low-power user interface. Its 32 MHz Cortex-M3 performance supports responsive control logic, and the two 16-bit timers are useful for periodic measurement and alert timing. The compact QFN64 package helps reduce board size, while low-power modes suit battery-operated products. Medical use also requires application-specific electrical safety, EMC, validation, and regulatory checks beyond the MCU's electrical and environmental specifications.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho EFM32TG840F8-D-QFN64R — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | EFM32TG840F32-QFN64 |
|---|---|---|
| Brand | Silicon Labs | Silicon Labs |
| Package | 64-QFN (9 x 9 mm) | 64-QFN (9 x 9 mm) |
| CPU Core | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum CPU Frequency | 32 MHz | 32 MHz |
| Flash Memory | 8 kB | 32 kB |
| RAM Memory | 2 kB | 4 kB |
| Digital I/O Pins | 56 pins | 56 pins |
| Timers | 2 x 16-bit timers | 2 x 16-bit timers |
| Low-Power Features | Energy-saving modes and fast wake-up | Energy-saving modes and fast wake-up |
Bảo phân biệt quan trọng
- Lower-memory option within the same Tiny Gecko QFN64 family (vsEFM32TG840F32-QFN64)
- Same processing performance and I/O count as the verified family alternative (vsEFM32TG840F32-QFN64)
- Matched package family for controlled PCB reuse (vsEFM32TG840F32-QFN64)
Ghi chú thiết kế
Use the manufacturer QFN64 land pattern and preserve the exposed-pad connection exactly as specified in the device documentation. Place input and bulk decoupling capacitors close to their associated supply pins, with short and low-inductance return paths to the ground plane. The exposed pad must be connected according to the recommended PCB stack-up and thermal design; it is not an optional mechanical feature.
Keep analog inputs, external oscillator connections, and communication signals away from noisy or fast-switching nets. Route the exposed-pad connections with minimal interruption where the land pattern permits, and maintain continuous ground planes beneath and around the MCU. Verify alternate-function routing for all 56 digital I/O pins in the manufacturer pinout table before assigning fixed PCB functions.
Do not treat the -D ordering suffix as a functional upgrade or use it to infer different electrical ratings; confirm the production part number against the current manufacturer ordering guide. Also avoid treating EFM32TG840F32-QFN64 as an exact equivalent: it increases Flash to 32 kB and RAM to 4 kB. Although the package and core are closely related, boot configuration, peripheral availability, and firmware assumptions must be reviewed before substitution.
Estimate the average power budget from active time, sleep time, clock frequency, and enabled peripherals rather than from the 32 MHz maximum alone. Low-power performance depends on whether the application uses the MCU's energy-saving modes consistently. For the exposed-pad thermal path, use the package dimensions and board construction specified by Silicon Labs; generic package assumptions may produce an inaccurate junction-temperature estimate.
Thông tin tuân thủ
Compliance declarations for the exact ordering code must be confirmed in current Silicon Labs documentation. AEC-Q100 status is not stated for this microcontroller.