EPF81188AQC208-3 - FLEX 8000 FPGA, 12K Gates, 148 I/O, 208-BFQFP | Intel / Altera
MPN: EPF81188AQC208-3 ✗ Tapus ng BuhayEPF81188AQC208-3 Ulas
Key features include 126 Logic Array Blocks (LABs) per device, in-circuit reconfigurability (ICR) that allows the FPGA to be re-programmed on the board without removing the part, and the MultiVolt I/O interface that lets the device drive either 3.3V or 5.0V outputs by selecting the VCCIO rail, providing easy bridging between legacy 5V peripherals and modern 3.3V ASICs. Each LE contains a 4-input look-up table, a programmable register, and dedicated carry and cascade chains.
The FLEX 8000 architecture employs a continuous, predictable routing fabric called the FastTrack Interconnect, which provides horizontal and vertical routing resources connecting every LAB to every other LAB with uniform delay, simplifying timing closure. Continuous Interconnect tiles span the full device, eliminating segmented-routing bottlenecks found in earlier CPLDs and enabling deterministic high-frequency design.
Typical applications include glue logic and bus interfacing, custom state-machine controllers, peripheral protocol bridges (UART, I2C, SPI multiplexing), legacy 5V system integration, prototyping of ASIC functions, and high-I/O parallel processing interfaces. The 148 user I/Os in a 208-pin QFP package provide ample pin budget for parallel data buses.
When designing with the EPF81188AQC208-3, note that the device requires two supply rails: VCCINT (5V core) and VCCIO (3.3V or 5V I/O). All unused I/O pins should be left floating or tied to ground per the datasheet to minimize leakage, and configuration must be loaded via the Altera MAX+plus II or Quartus development flow using a serial or parallel EPROM.
This page synthesizes distributor pricing, drop-in same-package alternatives, and design considerations for the EPF81188AQC208-3 in a single reference not found in the original Altera datasheet PDF.
Mga alternatibo na pwedeng ilagay na EPF81188AQC208-3 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok EPF81188AQC208-3 (parehas na form factor at footprint) — pagkakaiba sa Operating Temperature, Configuration Method, Package, Mounting Type, Process Technology.
EPF81188AQC208-2
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →EPF81188AQC208-4
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →EPF81188AQC208-1
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
EPF81188AQC208-3 Mga Pinakamataas na Rating at Electrical Characteristics
| Family | FLEX 8000 |
| Logic Family | CMOS |
| Usable Gates | 12,000 |
| Logic Elements (LEs) | 1,008 |
| Logic Array Blocks (LABs) | 126 |
| User I/Os | 148 |
| Package Type | 208-BFQFP (Plastic QFP) |
| Pins | 208 |
| Supply Voltage (VCCINT) | 5 V |
| I/O Supply Voltage (VCCIO) | 3.3 V or 5.0 V (MultiVolt) |
| Temperature na Operasyon | 0 C to +70 C (Commercial) |
| Speed Grade | -3 |
| In-Circuit Reconfigurability | Yes (ICR) |
| Uri ng Pagpapasok | Surface Mount |
| Process Technology | CMOS SRAM |
Pin Configuration ng EPF81188AQC208-3
| Pin 1 | I/O — User I/O (bank-dependent VCCIO) |
| Pin 2 | I/O — User I/O (bank-dependent VCCIO) |
| Pin 3 | VCCINT — 5V core supply |
| Pin 4 | I/O — User I/O |
| Pin 5 | I/O — User I/O |
| Pin 6 | GND — Ground |
| Pin 7 | I/O — User I/O |
| Pin 8 | I/O — User I/O |
| Pin 9 | VCCIO — I/O supply (3.3V or 5V) |
| Pin 10 | I/O — User I/O |
| Pin 11 | I/O — User I/O |
| Pin 12 | GND — Ground |
| Pin 13 | nCONFIG — Configuration control (active low) |
| Pin 14 | nSTATUS — Configuration status (active low) |
| Pin 15 | CONF_DONE — Configuration done indicator |
| Pin 16 | DCLK — Configuration clock input |
| Pin 17 | DATA0 — Configuration data input (PS mode) |
| Pin 18 | MSEL0 — Configuration mode select 0 |
| Pin 19 | MSEL1 — Configuration mode select 1 |
| Pin 20 | GND — Ground |
Tipikal na mga Gamit
EPF81188AQC208-3 ay nararapat para sa 6 aplikasyons: Glue Logic and Bus Interfacing, Custom State-Machine Controllers, Peripheral Protocol Bridges (UART / SPI / I2C Multiplexers), Legacy 5V System Integration, ASIC Function Prototyping, High-I/O Parallel Processing Interfaces.
Glue Logic and Bus Interfacing
The EPF81188AQC208-3 is well suited as a glue-logic bridge between mismatched parallel buses. With 148 user I/Os and MultiVolt I/O support (3.3V or 5V VCCIO), the device can simultaneously interface a 5V legacy peripheral to a 3.3V processor without external level shifters. The 12K usable gates are typically sufficient for address decoding, wait-state generation, and chip-select logic. Designers typically allocate 60-70% of LEs for combinatorial decode and 30-40% for registered handshake logic.
Inirekomenda
Custom State-Machine Controllers
FLEX 8000's LAB-based architecture with 4-input LUTs and dedicated per-LE registers makes the EPF81188AQC208-3 a strong platform for complex state machines. The 1,008 logic elements accommodate 10-20 large state machines with 16-32 states each, while the 126 LABs provide predictable routing for high-fanout control signals. Designers commonly use the device in industrial-control front-ends, motor-control sequencers, and protocol bridges where deterministic timing is critical.
Inirekomenda
Peripheral Protocol Bridges (UART / SPI / I2C Multiplexers)
The 148 I/O pins and abundant logic resources of the EPF81188AQC208-3 enable multi-protocol bridging tasks such as UART-to-SPI, I2C-to-parallel, and SPI multiplexing. Each LAB cluster can host an independent serial engine, while the global FastTrack Interconnect routes control signals with uniform delay. The device's 5V-tolerant I/Os interface directly to legacy RS-232 transceivers and 5V sensors without external protection.
Inirekomenda
Legacy 5V System Integration
When modernizing or extending systems built around 5V microprocessors and peripherals, the EPF81188AQC208-3 provides a 5V-tolerant I/O interface that does not require level shifting. The device can act as a co-processor or peripheral controller alongside 8051, 68k, or Z80 host CPUs, providing interrupt arbitration, DMA handshaking, and memory-mapping functions. The MultiVolt feature also allows one FPGA to drive both 5V and 3.3V rails on the same board.
Inirekomenda
ASIC Function Prototyping
Engineers historically used the EPF81188AQC208-3 to prototype mid-complexity ASICs because of its 12,000 usable gates, deterministic timing, and in-circuit reconfigurability (ICR). A design implemented in FLEX 8000 can be migrated to a gate-array or cell-based ASIC once validated, with the FPGA serving as a bit-accurate functional model. The 208-BFQFP package provides test points on all four sides for oscilloscope probing during validation.
Inirekomenda
High-I/O Parallel Processing Interfaces
With 148 user I/Os, the EPF81188AQC208-3 is suitable for parallel data acquisition, image preprocessing front-ends, and multi-channel ADC/DAC interfacing. Each LE can be configured as a small arithmetic unit, enabling simple parallel MAC operations at moderate throughput. Combined with the device's 5V tolerance, it interfaces directly to industrial-grade parallel ADCs and camera-link receivers without external buffers.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for EPF81188AQC208-3 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | EPF81188AQC208-2 | EPF81188AQC208-4 | EPF81188AQC208-1 |
|---|---|---|---|---|
| Brand | Intel / Altera | Intel / Altera | Intel / Altera | Intel / Altera |
| Package | 208-BFQFP | 208-BFQFP - same | 208-BFQFP - same | 208-BFQFP - same |
| Usable Gates | 12,000 | 12,000 | 12,000 | 12,000 |
| Logic Elements | 1,008 | 1,008 | 1,008 | 1,008 |
| LABs | 126 | 126 | 126 | 126 |
| User I/Os | 148 | 148 | 148 | 148 |
| Speed Grade | -3 | -2 (faster) | -4 (slower) | -1 (fastest) |
| Operating Temperature | 0 C to +70 C (Commercial) | 0 C to +70 C (Commercial) | 0 C to +70 C (Commercial) | 0 C to +70 C (Commercial) |
Pangunahing mga Pagkakaiba
- Same-package faster speed grade available (kumpara saEPF81188AQC208-2)
- MultiVolt I/O supports mixed-voltage buses (kumpara saEPF81188AGC232-4N (PGA variant))
- In-circuit reconfigurability for field updates (kumpara saMAX 7000 CPLDs (EPM7128SQC100-10))
Talaan ng Disenyo
The EPF81188AQC208-3 requires two supply rails: VCCINT at 5V (+/-5%) for the core logic and VCCIO at 3.3V or 5V for the I/O banks. Both rails must be present for proper operation - VCCIO can be sequenced before or after VCCINT, but VCCINT must reach stable 5V before configuration begins. Decouple each VCCINT pin with a 0.1uF ceramic placed within 5mm, and each VCCIO pin with the same. Add a bulk 47uF tantalum or 100uF aluminum electrolytic at the supply entry to suppress FPGA inrush current during configuration.
Layout the 208-BFQFP with a continuous ground plane on layer 2 to provide a low-impedance return path for the 148 high-speed I/Os. Route all configuration signals (DCLK, nCONFIG, nSTATUS, CONF_DONE, DATA0) on the same layer with controlled impedance, and keep them away from switching I/O traces. Place the configuration EPROM within 100mm of DCLK and DATA0 to minimize skew. FLEX 8000 JTAG signals (TMS, TDI, TDO, TCK) should each have a 10k pull-up on TMS and TDI for reliable boundary-scan operation.
All unused user I/O pins must be left floating or tied to ground - leaving them floating with VCCIO applied can cause leakage current of several hundred microamps per pin and may cause configuration failure. Do not exceed VCCIO voltage during programming - use a level translator if the host MCU runs at 3.3V and the FPGA's VCCIO is set to 5V. The FLEX 8000 is a 5V core device, so never back-power VCCIO before VCCINT reaches the 4.75V threshold or the I/O buffers can latch-up.
Impormasyon ng Pagsunod sa Kautusan
The FLEX 8000 family was introduced in the mid-1990s, before RoHS compliance was standard. The original AQC208-3 is likely not RoHS compliant - only later -N suffixed variants carry RoHS compliance. Designers should verify with the distributor's lot documentation.
