L9979-TR - Automotive Dual H-Bridge Driver | STMicroelectronics
MPN: L9979-TR ✓ NakahandaL9979-TR Ulas
A dual H-bridge driver is a power management IC that contains two full H-bridge circuits, each capable of driving a DC motor bidirectionally or controlling two separate loads. It is a type of motor driver, which falls under the broader category of power management ICs. The L9979-TR integrates the power stage, control logic, and protection features, simplifying the design of motor control systems in vehicles.
Key features of the L9979-TR include a low quiescent current of 10 µA in standby mode, which is critical for battery-powered automotive applications. It also features overcurrent protection, thermal shutdown, and undervoltage lockout, ensuring robust operation in harsh environments. The device is AEC-Q100 qualified, meeting the stringent reliability requirements of the automotive industry. Its SPI interface allows for advanced diagnostics and control, enabling real-time monitoring of load conditions and fault status.
The L9979-TR uses a standard CMOS process technology, which balances performance and cost. The integrated protection features reduce the need for external components, saving board space and improving system reliability. The device's ability to operate at high temperatures (up to 150°C junction) makes it suitable for under-hood applications where ambient temperatures can be extreme.
Typical applications include automotive HVAC actuators, mirror adjustment, seat positioning, and other DC motor control functions. The L9979-TR's dual H-bridge configuration allows it to control two motors independently, making it ideal for applications requiring multiple actuators. Its SPI interface enables precise control and diagnostics, which is essential for advanced automotive systems.
When designing with the L9979-TR, it is important to ensure proper PCB layout to minimize parasitic inductance and resistance in the power path. Adequate decoupling capacitors should be placed close to the supply pins to handle transient currents. The thermal pad should be connected to a large copper area to dissipate heat effectively, especially when driving high currents continuously.
Mga alternatibo na pwedeng ilagay na L9979-TR — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok L9979-TR (parehas na form factor at footprint) — pagkakaiba sa Operating Temperature Range.
L9979
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →L9979-TR Mga Pinakamataas na Rating at Electrical Characteristics
| Supply Voltage Range | 5.5 V to 36 V |
| Output Current (Continuous) | 1.2 A per channel |
| Output Current (Peak) | 2 A per channel |
| Number of H-Bridges | 2 |
| Control Interface | SPI |
| Quiescent Current (Standby) | 10 µA |
| Hanay ng Temperature na Operasyon | -40°C to +150°C (junction) |
| Packhaging | PowerSO-20 |
| Uri ng Pagpapasok | Surface Mount |
| AEC-Q100 Qualification | Yes |
| Proteksyon Laban sa Higit na Kuryente | Yes |
| Thermal Shutdown | Yes |
| Undervoltage Lockout | Yes |
| Tindminan RoHS | Compliant |
| Level ng MSL | 3 |
Pin Configuration ng L9979-TR
| Pin 1 | OUT1 — H-bridge 1 output |
| Pin 2 | OUT2 — H-bridge 1 output |
| Pin 3 | GND — Ground |
| Pin 4 | VS — Supply voltage |
| Pin 5 | OUT3 — H-bridge 2 output |
| Pin 6 | OUT4 — H-bridge 2 output |
| Pin 7 | GND — Ground |
| Pin 8 | VS — Supply voltage |
| Pin 9 | SCK — SPI clock |
| Pin 10 | SDI — SPI data input |
| Pin 11 | SDO — SPI data output |
| Pin 12 | CSN — SPI chip select (active low) |
| Pin 13 | EN — Enable input |
| Pin 14 | GND — Ground |
| Pin 15 | VS — Supply voltage |
| Pin 16 | OUT5 — H-bridge 2 output |
| Pin 17 | OUT6 — H-bridge 2 output |
| Pin 18 | GND — Ground |
| Pin 19 | VS — Supply voltage |
| Pin 20 | OUT7 — H-bridge 1 output |
Tipikal na mga Gamit
L9979-TR ay nararapat para sa 6 aplikasyons: HVAC Actuator Control, Mirror Adjustment, Seat Positioning, Headlamp Leveling, Fuel Pump Control, Industrial Automation.
HVAC Actuator Control
The L9979-TR is ideal for controlling HVAC actuators in automotive climate control systems. Its dual H-bridge configuration allows independent control of two actuators, such as air mix and mode doors. The SPI interface enables precise positioning and diagnostics, while the low standby current minimizes battery drain when the vehicle is off. The wide supply voltage range (5.5V to 36V) ensures compatibility with various vehicle electrical systems. The integrated protection features, including overcurrent and thermal shutdown, enhance system reliability in the harsh automotive environment.
Inirekomenda
Mirror Adjustment
The L9979-TR is well-suited for power mirror adjustment systems in vehicles. It can drive the two motors required for horizontal and vertical mirror movement independently. The device's 1.2A continuous output current is sufficient for small DC motors used in mirror actuators. The SPI interface allows for precise control and feedback, enabling features like memory position recall. The AEC-Q100 qualification ensures reliable operation over the vehicle's lifetime. The compact PowerSO-20 package saves board space, which is critical in the confined space of a door module.
Inirekomenda
Seat Positioning
The L9979-TR can be used in seat positioning systems to control the motors that adjust seat position, recline, and lumbar support. Its dual H-bridge allows simultaneous control of two motors, such as fore-aft and recline. The device's peak current capability of 2A handles the inrush current of DC motors during startup. The SPI interface provides diagnostic information, such as overcurrent and thermal faults, which can be used for system monitoring. The wide operating temperature range (-40°C to +150°C) ensures reliable operation in all climates.
Inirekomenda
Headlamp Leveling
The L9979-TR is suitable for headlamp leveling systems that adjust the vertical angle of headlights based on vehicle load. It can drive the stepper motor or DC motor used for leveling. The device's low quiescent current is beneficial for systems that remain in standby when not in use. The SPI interface allows for precise control and calibration. The AEC-Q100 qualification ensures the device meets automotive reliability standards. The integrated protection features protect the motor and driver from faults.
Inirekomenda
Fuel Pump Control
The L9979-TR can be used in fuel pump control systems to drive the fuel pump motor. Its dual H-bridge configuration allows for bidirectional control, which can be used for priming or reverse operation. The device's high peak current capability (2A) handles the motor's startup surge. The SPI interface provides real-time diagnostics, enabling early detection of pump failures. The wide supply voltage range (5.5V to 36V) accommodates variations in battery voltage during cranking. The robust protection features ensure safe operation in the engine compartment.
Inirekomenda
Industrial Automation
While designed for automotive, the L9979-TR can be used in industrial automation for controlling small DC motors in valves, pumps, and actuators. Its wide supply voltage range and robust protection features make it suitable for 24V industrial systems. The SPI interface allows for integration with PLCs and microcontrollers. The device's low standby current is beneficial for battery-powered industrial sensors. The PowerSO-20 package is compatible with standard surface-mount assembly processes, making it easy to integrate into existing manufacturing lines.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for L9979-TR — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | L9979 | DRV8876 | VNH5019A |
|---|---|---|---|---|
| Package | PowerSO-20 | PowerSO-20 | HTSSOP-16 | PowerSO-36 |
| Brand | STMicroelectronics | STMicroelectronics | Texas Instruments | STMicroelectronics |
| Supply Voltage Range | 5.5V to 36V | 5.5V to 36V | 4.5V to 37V | 5.5V to 36V |
| Continuous Output Current | 1.2A per channel | 1.2A per channel | 3.5A | 30A |
| Peak Output Current | 2A per channel | 2A per channel | 6A | 40A |
| Control Interface | SPI | SPI | PWM | PWM |
| Quiescent Current (Standby) | 10 µA | 10 µA | 1 µA | 5 µA |
| AEC-Q100 Qualified | Yes | Yes | Yes | Yes |
Pangunahing mga Pagkakaiba
- Dual H-bridge with SPI control (kumpara saDRV8876)
- Low standby current (kumpara saVNH5019A)
- AEC-Q100 qualification (kumpara saDRV8876)
Talaan ng Disenyo
Ensure the PowerSO-20 package's exposed thermal pad is soldered to a large copper area on the PCB to dissipate heat effectively. Use multiple vias to connect the thermal pad to the ground plane. Place decoupling capacitors (e.g., 100nF and 10µF) close to the VS pins to handle transient currents.
At maximum continuous current (1.2A per channel) and a supply voltage of 13.5V, the power dissipation can be significant. Calculate the junction temperature using the package's thermal resistance (θJA) and ensure it stays below 150°C. For high ambient temperatures, consider reducing the output current or adding forced airflow.
Do not exceed the absolute maximum supply voltage of 40V. Ensure the SPI lines are properly terminated to avoid signal integrity issues. The EN pin must be pulled high to enable the device; leaving it floating may cause unpredictable behavior. Always initialize the SPI interface before enabling the outputs.
Impormasyon ng Pagsunod sa Kautusan
RoHS compliant per STMicroelectronics product page. AEC-Q100 qualified for automotive applications.