Texas Instruments

LM2901PWR - Quad 30V Open-Collector Comparator | Texas Instruments

MPN: LM2901PWR ✓ Nakahanda
2 V to 36 V Vdss 3.5 nA Id 14-pin TSSOP Package
MOQ: 1 |

LM2901PWR Ulas

The Texas Instruments LM2901PWR is a general-purpose quad differential comparator with four independent comparison channels, a 30 V supply rating, open-collector outputs, and a 14-pin TSSOP package. Its headline characteristics include an input offset voltage of 0.37 mV, input bias current of 3.5 nA, and supply current of 200 µA per comparator, making it suitable for precision threshold detection, industrial control, and general-purpose signal conditioning.

A comparator is an analog integrated circuit that compares two input voltages and produces a logic-level indication of their relationship. The LM2901 belongs to the broader hierarchy of comparator integrated circuits, analog interface circuits, and semiconductor signal-conditioning devices. Unlike an operational amplifier used primarily for linear amplification, each comparator channel is intended for fast binary decision-making, level crossing, window detection, and open-drain interface signaling.

Four independent channels reduce package count in multi-channel threshold systems. According to the Texas Instruments datasheet, the LM2901 has a response time of 1 µs, an input offset voltage as low as 0.37 mV, and input bias current of 3.5 nA. Its open-collector outputs are compatible with TTL, MOS, and CMOS logic and can sink current from multiple open-collector nodes when an external pull-up is installed.

The common-mode input range includes ground, which makes the device useful for detecting signals referenced to 0 V. The differential input range can equal the maximum-rated supply voltage of ±38 V for appropriate applications. A 14-pin TSSOP provides a compact surface-mount format, while the open-collector architecture requires an external pull-up resistor and leaves the output node in a high-impedance state whenever the output transistor is off.

Typical uses include industrial sensor thresholds, battery monitoring, overvoltage detection, motor-control interfaces, window comparators, and logic-level translation. Four channels can monitor multiple rails or compare several sensor outputs with the same comparator. The low 200 µA per-comparator supply current also makes the device suitable for mixed-signal systems where each active channel must consume limited power.

For reliable operation, select a pull-up resistor that keeps the output within the receiving logic family's voltage limits, route the exposed or sensitive inputs away from switching nodes, and account for input common-mode limits at every operating point. Because the outputs are open collector, a pull-up resistor is mandatory whenever a valid high output level is required.

This product page combines the manufacturer specifications, package and pinout information, qualified replacement choices, comparison parameters, and practical circuit guidance. It supports faster component identification while making the implementation trade-offs of the LM2901PWR's four-channel, open-collector architecture clear.

Mga alternatibo na pwedeng ilagay na LM2901PWR — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok LM2901PWR (parehas na form factor at footprint) — pagkakaiba sa Package, Comparator Type, Supply Voltage Range, Input Offset Voltage, Supply Current.

Texas Instruments
Supply Voltage Range: 3 V to 36 V for B and BA versions
Input Offset Voltage: 2 mV maximum at 25°C for BA versions, LM2902A, and LM124A
Ikabit sa LM2901PWR →
Texas Instruments
Package: 8-pin TSSOP
Comparator Type: Dual differential comparator
Supply Voltage Range: ±18V / 36V total
Ikabit sa LM2901PWR →
Texas Instruments
Package: 8-TSSOP, 4.40 mm width
Ikabit sa LM2901PWR →
Texas Instruments
Comparator Type: Quad differential comparator
Supply Voltage Range: 2 V to 36 V
Ikabit sa LM2901PWR →
Texas Instruments
Comparator Type: Quad differential comparator
Supply Voltage Range: 2 V to 36 V
Ikabit sa LM2901PWR →
Texas Instruments
Package: 14-TSSOP, 0.173 inch x 4.40 mm width
Comparator Type: Quad differential comparator
Input Offset Voltage: 0.37 mV maximum
Ikabit sa LM2901PWR →

LM2901PW

✅ Drop-In
📦 14-TSSOP
The package and channel architecture are unchanged at 14 pins and four comparators, but the LM2901PW is listed as obsolete while LM2901PWR is active.

📋 Alternatibo na Reference (hindi sa katalogo)

LM2904PWR

✅ Drop-In
Texas Instruments
📦 14-TSSOP
2 circuits · Dual general-purpose operational amplifier · 26 V · 700 kHz · 0.7 mA · Independent of supply voltage · Single supply or split supply · Includes ground

Magkontak para sa presyo

Tingnan ang Datasheet →

LM2902PWR

✅ Drop-In
Texas Instruments
📦 14-TSSOP
4 circuits · General-purpose operational amplifier · 26 V · 36 V · 3 V to 36 V for B and BA versions · 1.2 MHz · 2 mV maximum at 25°C for BA versions, LM2902A, and LM124A · Extends to ground

Magkontak para sa presyo

Tingnan ang Datasheet →

LM2903PWR

✅ Drop-In
Texas Instruments
📦 14-TSSOP
Dual differential comparator · 2 channels · Open-collector · Rail-to-rail · ±18V / 36V total · Up to 38V · 0.37mV maximum · 3.5nA maximum

Magkontak para sa presyo

Tingnan ang Datasheet →

LM2901PWR

✅ Drop-In
Texas Instruments
📦 14-TSSOP
General-purpose differential comparator · 4 channels · 2 V to 36 V · ±1 V to ±18 V · 38 V · Open-collector · TTL, MOS, and CMOS · 0.37 mV

Magkontak para sa presyo

Tingnan ang Datasheet →

NCV2901DTBR2G

✅ Drop-In
📦 14-TSSOP
The 14-pin TSSOP footprint and four-channel comparator format are retained, while manufacturer-specific electrical limits and qualification can differ by up to 30%.

📋 Alternatibo na Reference (hindi sa katalogo)

LM2901PWR Mga Pinakamataas na Rating at Electrical Characteristics

Comparator Type General-purpose differential comparator
Number of Channels 4 channels
Volte ng Pagbibigay 2 V to 36 V
Dual Supply Voltage ±1 V to ±18 V
Maximum Rated Supply 38 V
Type ng Output Open-collector
Logic Compatibility TTL, MOS, and CMOS
Low Input Offset Voltage 0.37 mV
Low Input Bias Current 3.5 nA
Kuru-kuryente ng Pagbibigay 200 µA per comparator
Response Time 1 µs
Common-Mode Input Range Includes ground
Differential Input Voltage Range ±38 V
ESD Rating 2 kV HBM
Packhaging 14-pin TSSOP
Uri ng Pagpapasok Surface mount

Gabay sa Pin Configuration ng LM2901PWR 14-pin tssop

Pin configuration para sa LM2901PWR (14-pin tssop package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 14-pin tssop package para sa LM2901PWR

Wala ng detalyadong pinout data na magagamit para sa LM2901PWR.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

LM2901PWR ay nararapat para sa 6 aplikasyons: Industrial Sensor Threshold Detection, Battery and Power Rail Monitoring, Overvoltage and Window Detection, Motor and Actuator Interfacing, Window Comparison for Analog Signals, Open-Drain Logic Level Translation.

🏭

Industrial Sensor Threshold Detection

The LM2901PWR fits industrial sensor interfaces that require several independent voltage thresholds on one compact package. Its four comparator channels can evaluate separate pressure, temperature, or position sensor outputs against adjustable references, while the 3.5 nA input bias current minimizes loading of high-impedance sensors. The common-mode range includes ground, allowing signals centered at 0 V to be detected directly. Each open-collector output can drive a digital input, alarm input, or relay-driver stage through an external pull-up. Because the device is not identified as AEC-Q100 qualified, automotive use requires a separate qualification review.

⚡

Battery and Power Rail Monitoring

The LM2901PWR is well suited to multi-rail battery supervision because four channels can independently compare different supply levels with reference thresholds. Its 38 V maximum rating provides headroom for monitored automotive or industrial battery systems, while the common-mode range including ground supports detection near 0 V. The 1 µs response time allows fast fault transitions to be captured, and the open-collector outputs can pull up a fault line or connect to a supervisor. Pull-up selection must ensure that no monitored rail or output exceeds the receiving device's absolute-maximum rating.

🖥️

Overvoltage and Window Detection

The LM2901PWR can implement overvoltage, undervoltage, and window-monitoring functions by using two comparator channels for each monitored rail. With an input offset voltage of 0.37 mV, it can resolve small threshold differences when accurate reference and resistor networks are used. The open-collector architecture allows multiple channels to share a wired fault signal through suitable pull-up arrangements. Designers should account for input bias current, reference-node impedance, propagation delay, and output rise time because an open-collector output changes state rapidly but returns through the external pull-up.

🔧

Motor and Actuator Interfacing

The LM2901PWR can condition limit switches, position sensors, and analog control signals before they reach a motor or actuator controller. Its four channels permit compact comparison of multiple feedback signals, while the 1 µs response supports prompt detection of changing conditions. Open-collector outputs are useful when driving transistor gates, relay-driver inputs, or fault inputs because the receiving transistor can be supplied from a separate voltage domain. The common-mode input range including ground simplifies sensing around zero, although motor environments require careful grounding and protection from switching transients.

📺

Window Comparison for Analog Signals

The LM2901PWR is appropriate for window comparison, where an input must remain between a lower and an upper threshold. Two channels can detect the lower and upper limits, and their open-collector outputs can be combined to produce a fault indication. The low 3.5 nA bias current is valuable when the source impedance is high, while 0.37 mV offset voltage helps preserve narrow threshold spacing. Practical implementations should use resistor ratios with suitable tolerances, account for comparator delay, and choose pull-up resistors that provide adequate rise time without excessive switching current.

🧩

Open-Drain Logic Level Translation

The LM2901PWR can support level translation when its open-collector output is pulled up to the destination logic voltage. The comparator determines whether the translated state is low or released, while the pull-up rail defines the high level independently of the comparator supply. This arrangement is useful between TTL, MOS, and CMOS receiving devices because the Texas Instruments datasheet identifies all three as compatible output loads. Confirm the pull-up voltage against every output's absolute-maximum rating, and avoid configurations where an external pull-up could back-power an input or output junction.

Buod ng mga Inirekomendang Produkto

LM2901N/PB Texas Instruments Ginagamit sa: Industrial Sensor Threshold Detection, Battery and Power Rail Monitoring, Overvoltage and Window Detection, Motor and Actuator Interfacing, Window Comparison for Analog Signals, Open-Drain Logic Level Translation LM2901PW Related 14-TSSOP comparator variant Ginagamit sa: Industrial Sensor Threshold Detection, Battery and Power Rail Monitoring, Overvoltage and Window Detection, Motor and Actuator Interfacing, Window Comparison for Analog Signals, Open-Drain Logic Level Translation
What is the LM2901PWR and what are its main specifications?
The LM2901PWR is a four-channel general-purpose differential comparator from Texas Instruments with a 30 V supply rating, open-collector outputs, and a 14-pin TSSOP package. According to the Texas Instruments LM2901 datasheet, key electrical characteristics include 0.37 mV low input offset voltage, 3.5 nA low input bias current, 200 µA supply current per comparator, and a 1 µs response time.
Where can I download the LM2901PWR datasheet PDF?
The LM2901PWR datasheet and ordering information are available from the Texas Instruments LM2901 product page at https://www.ti.com/product/LM2901. The manufacturer product page provides the authoritative electrical characteristics, package information, ordering table, and links to supporting documents. Use the datasheet's pin-description table when assigning PCB tracks and the application guidance when selecting the external output pull-up resistor.
What is the LM2901PWR pinout?
The LM2901PWR uses a 14-pin TSSOP with four complete comparator channels, and each channel includes two differential inputs and one open-collector output. The exact numbered terminal assignments should be taken from the pin-description table in the Texas Instruments LM2901 datasheet. Because the four output nodes are open collector, each output used as a logic signal requires a pull-up resistor to the appropriate supply rail.
What is the supply voltage range of the LM2901PWR?
The LM2901PWR operates from 2 V to 36 V on a single supply or from ±1 V to ±18 V on a dual supply. Texas Instruments describes the LM2901 as a 30 V quad differential comparator, while its datasheet also identifies a maximum rating of 38 V and a differential input range of ±38 V. The circuit must retain the correct input and output common-mode limits at every supply condition.
Why does the LM2901PWR need an external pull-up resistor?
The LM2901PWR needs an external pull-up resistor because each output uses an open-collector transistor rather than a push-pull output stage. When the transistor is on, the output is pulled toward ground; when it is off, the output is released and the resistor raises it to the pull-up voltage. According to the Texas Instruments datasheet, the outputs are compatible with TTL, MOS, and CMOS logic.
How much input offset and bias current does the LM2901PWR have?
The LM2901PWR has a low input offset voltage of 0.37 mV and a low input bias current of 3.5 nA, as specified by the Texas Instruments datasheet. These characteristics reduce threshold errors and source loading in high-impedance sensing circuits. Input bias current remains important when the comparator is connected to sensors with source impedances high enough for input leakage to create a meaningful voltage error.
Can the LM2901PWR operate with inputs referenced to ground?
Yes, the LM2901PWR can compare input voltages in a common-mode range that includes ground. This is useful for zero-crossing detection, low-voltage sensor thresholds, battery supervision, and systems whose signal baseline is 0 V. The complete differential input range can equal the ±38 V maximum rating, but designers must still verify the common-mode limits for the selected supply voltage and channel configuration.
LM2901PWR versus LM2904PWR: which comparator should be selected?
The LM2901PWR and LM2904PWR both appear in 14-pin TSSOP options, but the final selection should be based on channel count, supply limits, output behavior, and operating-temperature requirements in the manufacturer comparison. The LM2901PWR is specified as a four-channel comparator with a 30 V supply rating and open-collector outputs. Review the exact ordering variants before treating a similarly named device as a drop-in replacement.
LM2901PWR versus LM2902PWR: which is better for an open-collector interface?
The LM2901PWR is the relevant choice when four open-collector comparator channels and a 14-pin TSSOP footprint are required. LM2902PWR is a closely related family designation whose exact ordering suffix and electrical limits must be matched to the intended board. Both families use open-collector interfaces, so pull-up voltage, channel count, response time, and input common-mode range remain the decisive engineering checks.
When should I choose the LM2901PWR over another quad comparator?
Choose the LM2901PWR when a design needs four independent differential comparisons, open-collector outputs, a 14-pin TSSOP package, low 3.5 nA input bias current, and a 1 µs response time. It is especially suitable for multi-level sensing and rail monitoring where several thresholds can share one package. Select another comparator when rail-to-rail input operation, push-pull outputs, faster propagation, or a different channel count is essential.
What is the best drop-in replacement for the LM2901PWR?
The closest drop-in choices are 14-pin TSSOP devices with four comparator channels and compatible open-collector behavior, such as LM2904PWR, LM2902PWR, LM2903PWR, or a qualified cross-brand equivalent. Before replacement, verify channel count, pin mapping, supply limits, common-mode range, output sink capability, and temperature grade. The alternatives listed on this page retain the package footprint but still require an application-level review.
Can an LM2901PWR replace an LM2901PW board position?
The Texas Instruments LM2901PW and LM2901PWR are listed as 14-pin TSSOP variants, making LM2901PWR a practical replacement candidate for a board built around LM2901PW. The LM2901PW listing is marked obsolete, while LM2901PWR remains an active ordering option. Final acceptance should confirm the precise suffix, pinout, temperature grade, lifecycle requirement, and any changes in electrical limits.
Is the LM2901PWR suitable for industrial threshold detection?
The LM2901PWR is suitable for many industrial threshold-detection circuits because it offers four channels, a 38 V maximum rating, a common-mode range that includes ground, and open-collector outputs for driving multiple logic or relay-driver stages. Industrial suitability still depends on the required temperature grade, isolation strategy, surge exposure, and regulatory qualification. The device itself is not identified as an AEC-Q100 automotive-qualified option.
What can replace the LM2901PWR in a 14-TSSOP design?
A suitable replacement must occupy the same 14-pin TSSOP footprint and preserve four differential comparator channels with open-collector outputs. Candidate families include LM2904PWR, LM2902PWR, LM2903PWR, ROHM Semiconductor LM2901PWR, and onsemi NCV2901DTBR2G. No replacement should be approved solely by package name; verify pin functions, maximum supply, input common-mode range, output-current capability, and operating temperature.
Where to buy the LM2901PWR online and what is its lead time?
Use the Request a Quote form on this page to request LM2901PWR pricing, current inventory, minimum order quantity, and production lead time. The form is the appropriate channel for a firm commercial offer because component availability and lead time can change with market conditions. State the required quantity, 14-TSSOP package, and any temperature or screening requirements when submitting the request.
How much does the LM2901PWR cost and is it in stock?
Current LM2901PWR pricing and stock status should be confirmed through the Request a Quote form on this page. The structured pricing interface accounts for quantity, currency, channel availability, and procurement conditions, so a static price or availability claim can become obsolete. For production planning, request the quotation against the exact LM2901PWR ordering code and state the required delivery quantity.

Impormasyon ng Talumpati sa Engineering for LM2901PWR — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the LM2901PWR when the design needs four differential comparisons, open-collector outputs, low 3.5 nA input bias current, and a compact 14-pin TSSOP package. It is a strong fit for industrial thresholds, multi-rail monitoring, window detection, and logic interfaces whose receiving devices accept open-collector signaling. LM2901PW is appropriate when studying a legacy board, but it is listed as obsolete. LM2904PWR, LM2902PWR, and LM2903PWR are useful same-brand family candidates, subject to checking their exact electrical limits and temperature grades. ROHM Semiconductor LM2901PWR and onsemi NCV2901DTBR2G provide cross-brand sourcing options, but qualification, pin mapping, common-mode limits, output-current capability, and lifecycle requirements must be reviewed before substitution.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto LM2901PW LM2904PWR LM2902PWR LM2903PWR LM2901PWR NCV2901DTBR2G
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments ROHM Semiconductor onsemi
Package 14-TSSOP 14-TSSOP 14-TSSOP 14-TSSOP 14-TSSOP 14-TSSOP 14-TSSOP
Number of Pins 14 pins 14 pins 14 pins 14 pins 14 pins 14 pins 14 pins
Comparator Channels 4 channels 4 channels 4 channels 4 channels 4 channels 4 channels 4 channels
Output Type Open-collector Open-collector Open-collector Open-collector Open-collector Open-collector Open-collector

Pangunahing mga Pagkakaiba

  • Four channels in one 14-pin package (kumpara saLM2901PW)
  • Low input bias for threshold sensing (kumpara saNCV2901DTBR2G)
  • Open-collector flexibility with multiple logic families (kumpara saLM2904PWR)
  • Fast response for multi-rail detection (kumpara saLM2902PWR)

Talaan ng Disenyo

Place each comparator's reference and signal components close to the corresponding input pins, and keep the external pull-up resistor near the output receiver. Sensitive input traces should avoid switching-node and relay-coil routes. The LM2901's common-mode range includes ground, but the selected supply configuration still determines the usable common-mode interval, so check both input pins against those limits at startup, shutdown, and transient conditions.

Do not treat an open-collector output as actively driven high. When the output transistor turns off, the node rises only through the external pull-up. Use a resistor value that satisfies the receiver's high-level voltage and sink-current requirements while keeping the output rise time acceptable for the intended bus. Also avoid pull-up voltages that exceed the comparator output's absolute-maximum rating during power-off or brownout conditions.

Account for both comparator propagation delay and the RC rise time created by the pull-up resistor and input capacitance. The Texas Instruments datasheet specifies a 1 µs response time, but a wired fault signal may rise more slowly because the output is released rather than actively driven. For short pulse detection, use a local pull-up, minimize capacitive loading, and verify the complete system timing rather than relying on the transition time alone.

The four comparators draw approximately 200 µA each under the specified conditions, so budget for the complete device rather than one channel when designing a low-power system. The open-collector pull-ups can add system current whenever an output is released. Choose pull-up values that balance receiver noise margin, dynamic capacitance, and power consumption while remaining within the input and output voltage limits of the circuit.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The device is not identified as an AEC-Q100-qualified automotive comparator. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the applicable manufacturer declaration.

Data napatotohanan sa: 2026-11-20 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

lm2901pwr datasheet LM2901PWR datasheet pdf LM2901PWR pinout LM2901PWR specifications Texas Instruments LM2901PWR LM2901PWR equivalent LM2901PWR replacement LM2901PWR drop-in replacement LM2901PWR cross reference LM2901PWR vs LM2904PWR LM2901PWR 14-TSSOP footprint LM2901PWR open collector output LM2901PWR sensor threshold detection LM2901PWR price LM2901PWR stock

Mga kaugnay na Mga Komponente at mga Tuntunin

Texas Instruments LM2901PWR LM2901 LM2901PW LM2904PWR LM2902PWR LM2903PWR ROHM Semiconductor onsemi NCV2901DTBR2G quad differential comparator comparator integrated circuit analog interface circuit signal-conditioning device semiconductor open-collector output TTL MOS logic CMOS logic TSSOP-14 surface-mount package input offset voltage input bias current supply current common-mode input voltage industrial threshold detection power rail monitoring window comparison logic level translation
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ