LM2904AQTH-13 - Dual 36V Automotive Op Amp | Diodes Incorporated
MPN: LM2904AQTH-13 ✓ NakahandaLM2904AQTH-13 Ulas
An operational amplifier, commonly called an op amp, is an analog integrated circuit that compares an inverting input with a non-inverting input and drives its output toward the difference between them, amplified by a high open-loop gain. The LM2904AQ family contains independent dual amplifiers designed for general-purpose signal conditioning. Its two channels can process separate signals or be configured together for differential, filtering, comparator-style, and amplifier functions.
The LM2904AQTH-13 combines two amplifier circuits in one compact package. Manufacturer listings identify a maximum supply voltage of 36 V, a supply current of 500 uA, an input bias current of 20 nA, and a 100 dB listed performance rating. These characteristics support low-power signal-chain designs operating from higher-voltage rails than typical 5 V or 3.3 V analog circuits, including industrial sensing, vehicle electronics, instrumentation, and low-level signal conditioning.
The device belongs to the LM290xAQ automotive-compliant dual and quad operational-amplifier family. The LM2904Q and LM2904AQ dual versions are offered in SO-8, TSSOP-8, and MSOP-8 package options, while quad LM2902 devices use 14-pin packages. Industry-standard pinouts and green mold compound support compact surface-mount implementation and environmentally conscious manufacturing practices.
Typical applications include automotive sensor interfaces, industrial transducers, battery-powered monitoring equipment, current sensing, signal amplification, and active filtering. The two independent channels allow one device to handle a differential measurement path or two related analog channels while reducing component count. Designers should still verify input common-mode range, output swing, stability, and absolute maximum ratings for the chosen operating conditions.
For PCB design, place input, output, bypass, and compensation components close to their associated pins, then observe the pinout and layout guidance in the manufacturer datasheet. A clean grounding strategy and short feedback routes are especially important because long traces can introduce parasitic feedback, offset, and instability in high-gain amplifier configurations.
This product page combines package, application, sourcing, and replacement guidance with practical design considerations. It is intended to help engineers identify the correct automotive dual op amp, verify the 8-pin TSSOP footprint, compare pin-compatible family options, and plan a stable surface-mount implementation without changing the PCB land pattern.
Mga alternatibo na pwedeng ilagay na LM2904AQTH-13 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok LM2904AQTH-13 (parehas na form factor at footprint) — pagkakaiba sa Input Bias Current, Package.
LM2904QDRQ1
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo✗ Wala sa Stock
$0.22 / Yunit
Tingnan ang Datasheet →LM2904QDT
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
LM2904QDB
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
LM2904AQDR
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
LM2904AQDT
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
LM2904AQTH-13 Mga Pinakamataas na Rating at Electrical Characteristics
| Number of Amplifier Channels | 2 |
| Maximum Supply Voltage | 36 V |
| Kuru-kuryente ng Pagbibigay | 500 uA |
| Input Bias Current | 20 nA |
| Listed Performance Rating | 100 dB |
| Product Type | Standard general-purpose operational amplifier |
| Automotive Compliance | Automotive compliant |
| Packhaging | 8-pin TSSOP |
| Uri ng Pagpapasok | Surface mount |
| Mold Compound | Green |
Gabay sa Pin Configuration ng LM2904AQTH-13 8-pin tssop
Pin configuration para sa LM2904AQTH-13 (8-pin tssop package). Ang power device na ito ay may gate, drain, at source terminals. Para sa mga non-polarized package, sumangguni sa datasheet ng manufacturer para sa eksaktong oryentasyon ng pin 1 at mga detalye ng footprint. Kasama sa mga karaniwang aplikasyon ang disenyo ng power supply, motor driving, at load switching.
Wala ng detalyadong pinout data na magagamit para sa LM2904AQTH-13.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
LM2904AQTH-13 ay nararapat para sa 6 aplikasyons: Automotive Sensor Signal Conditioning, Industrial Transducer Interface, Battery-Powered Monitoring Equipment, Current-Sense Amplification, Precision Active Filtering, Instrumentation and Data Acquisition.
Automotive Sensor Signal Conditioning
The LM2904AQTH-13 fits automotive sensing systems that require two low-power amplifier channels and a 36 V-class supply capability. Its two independent channels can amplify or condition related sensor signals while reducing the number of packages on the board. The automotive-compliant LM290xAQ family and compact 8-pin TSSOP format support space-conscious electronic control designs. Designers should place the amplifier close to the sensor interface, maintain a low-impedance ground return, and confirm that input common-mode voltage, output swing, temperature range, and transient protection meet the vehicle requirements.
Inirekomenda
Industrial Transducer Interface
The LM2904AQTH-13 is appropriate for amplifying low-level signals from industrial transducers when the interface operates from a supply rail above conventional logic levels. Its listed 500 uA supply current supports low-power instrumentation, while the 2-channel architecture supports matched signal paths or differential measurement. The 36 V maximum supply rating provides additional design headroom compared with many 5 V amplifiers. Exact input common-mode range, offset voltage, bandwidth, and output swing must be checked for the selected sensor and production test limits.
Inirekomenda
Battery-Powered Monitoring Equipment
The LM2904AQTH-13 can serve as the analog front end in portable industrial monitoring equipment where low supply current and compactness are important. The listed 500 uA supply current reduces the analog portion of the power budget, and the dual channels can process a measurement signal and a reference or second sensor. Because the package accepts a higher-voltage environment than ordinary low-voltage op amps, engineers can also evaluate it in protected higher-voltage monitoring designs. Confirm quiescent-current behavior over temperature and use the pinout when assigning power and input connections.
Inirekomenda
Current-Sense Amplification
The LM2904AQTH-13 is suitable for amplifying the small voltage produced by a current-sense shunt when two channels are needed for signal conditioning or diagnostic feedback. Its 20 nA listed input bias current helps limit input bias error with practical shunt networks, while the 2-channel configuration can reduce package count. The 36 V supply capability is useful around higher-voltage power systems when the amplifier's absolute maximum ratings and common-mode limits are respected. Keep shunt connections short and use a quiet ground to avoid converting common impedance into measurement error.
Inirekomenda
Precision Active Filtering
The LM2904AQTH-13 can implement active filters and gain stages where two matched amplifier channels simplify layout and preserve a consistent package count. The dual configuration is useful for second-order sections or paired conditioning paths, while the listed 20 nA input bias current supports reasonably high source impedances. Stable compensation, output loading, and the selected gain determine the achievable bandwidth. Verify the manufacturer's gain-bandwidth and stability guidance before increasing gain or adding capacitive loads, and place resistance and capacitance networks directly at the relevant pins.
Inirekomenda
Instrumentation and Data Acquisition
The LM2904AQTH-13 is a practical choice for compact data-acquisition front ends that need two general-purpose analog channels, particularly when signals originate from higher-voltage industrial equipment. One channel can amplify a sensor output while the other handles buffering or gain conditioning. The TSSOP-8 package reduces board area, and the 500 uA listed supply current supports power-conscious acquisition modules. Validate input range, settling behavior, channel matching, and system calibration. Follow the manufacturer pin table and use short, shielded routes for sensitive measurement nodes.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for LM2904AQTH-13 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | LM2904QDR | LM2904QDT | LM2904QDB | LM2904AQDR | LM2904AQDT |
|---|---|---|---|---|---|---|
| Brand | Diodes Incorporated | Diodes Incorporated | Diodes Incorporated | Diodes Incorporated | Diodes Incorporated | Diodes Incorporated |
| Package | 8-pin TSSOP | 8-pin TSSOP | 8-pin TSSOP | 8-pin TSSOP | 8-pin TSSOP | 8-pin TSSOP |
| Amplifier Channels | 2 | 2 | 2 | 2 | 2 | 2 |
| Product Type | Standard general-purpose operational amplifier | General-purpose dual operational amplifier | General-purpose dual operational amplifier | General-purpose dual operational amplifier | Automotive-compliant dual operational amplifier | Automotive-compliant dual operational amplifier |
Pangunahing mga Pagkakaiba
- Dual automotive-compliant amplifier in a compact TSSOP-8 package (kumpara saLM324APWG4)
- Higher listed maximum supply capability than conventional low-voltage amplifiers (kumpara saLM2904QDR)
- Automotive-compliant family construction (kumpara saLM2904QDB)
Talaan ng Disenyo
Use the manufacturer pin-description table to assign every TSSOP-8 connection before routing the PCB. Place input, output, feedback, compensation, and bypass components close to their associated pins. Keep feedback traces short, provide a direct ground return, and maintain a continuous ground reference beneath the device where the board outline permits. These practices reduce parasitic feedback, channel crosstalk, and sensitivity to ground impedance.
Rated for a 36 V maximum supply, the LM2904AQTH-13 must still be protected from supply transients and accidental overvoltage. Confirm the absolute maximum supply rating, input common-mode range, output swing, and power dissipation under the worst operating condition. Estimated: with a 36 V input and a 5 V output at 1 mA total load, linear dissipation is approximately 31 mW before allowing for the amplifier's own supply current; confirm actual load and thermal limits in the completed design.
Do not infer that all LM2904 suffixes have identical temperature, qualification, or shipment requirements. Check each replacement's suffix-specific ordering information, electrical limits, and automotive qualification status. Also verify that the selected TSSOP-8 land pattern matches the manufacturer's pin-1 orientation and exposed-pad requirements. Functional equivalence alone is insufficient for a production substitution.
Impormasyon ng Pagsunod sa Kautusan
The LM290xAQ family is identified as automotive compliant, and the manufacturer datasheet states that green mold compound is standard. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not present in the verified product data.