Diodes Incorporated

LM2904AQTH-13 - Dual 36V Automotive Op Amp | Diodes Incorporated

MPN: LM2904AQTH-13 ✓ فعال
36 V Vdss 500 uA Id 8-pin TSSOP Package
حداقل سفارش: 1 |

LM2904AQTH-13 نمای کلی

The Diodes Incorporated LM2904AQTH-13 is a dual general-purpose operational amplifier with two independent amplifier channels, a 36 V supply rating, and an 8-pin TSSOP package. It is an automotive-compliant member of the LM2904AQ family and uses green mold compound as standard.

An operational amplifier, commonly called an op amp, is an analog integrated circuit that compares an inverting input with a non-inverting input and drives its output toward the difference between them, amplified by a high open-loop gain. The LM2904AQ family contains independent dual amplifiers designed for general-purpose signal conditioning. Its two channels can process separate signals or be configured together for differential, filtering, comparator-style, and amplifier functions.

The LM2904AQTH-13 combines two amplifier circuits in one compact package. Manufacturer listings identify a maximum supply voltage of 36 V, a supply current of 500 uA, an input bias current of 20 nA, and a 100 dB listed performance rating. These characteristics support low-power signal-chain designs operating from higher-voltage rails than typical 5 V or 3.3 V analog circuits, including industrial sensing, vehicle electronics, instrumentation, and low-level signal conditioning.

The device belongs to the LM290xAQ automotive-compliant dual and quad operational-amplifier family. The LM2904Q and LM2904AQ dual versions are offered in SO-8, TSSOP-8, and MSOP-8 package options, while quad LM2902 devices use 14-pin packages. Industry-standard pinouts and green mold compound support compact surface-mount implementation and environmentally conscious manufacturing practices.

Typical applications include automotive sensor interfaces, industrial transducers, battery-powered monitoring equipment, current sensing, signal amplification, and active filtering. The two independent channels allow one device to handle a differential measurement path or two related analog channels while reducing component count. Designers should still verify input common-mode range, output swing, stability, and absolute maximum ratings for the chosen operating conditions.

For PCB design, place input, output, bypass, and compensation components close to their associated pins, then observe the pinout and layout guidance in the manufacturer datasheet. A clean grounding strategy and short feedback routes are especially important because long traces can introduce parasitic feedback, offset, and instability in high-gain amplifier configurations.

This product page combines package, application, sourcing, and replacement guidance with practical design considerations. It is intended to help engineers identify the correct automotive dual op amp, verify the 8-pin TSSOP footprint, compare pin-compatible family options, and plan a stable surface-mount implementation without changing the PCB land pattern.

جایگزین‌های drop-in برای LM2904AQTH-13 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای LM2904AQTH-13 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Input Bias Current, Package.

Texas Instruments
Input Bias Current: 20 nA (typ)
Package: SOIC-8 (D)
مقایسه با LM2904AQTH-13 →

LM2904QDRQ1

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Texas Instruments
📦 8-pin TSSOP
2 · 3 V to 26 V · ±1.5 V to ±13 V · 700 kHz (typ) · 0.3 V/us (typ) · 2 mV (typ), 7 mV (max) · 20 nA (typ) · 500 uA (typ)

✗ ناموجود

$0.22 / واحد

مشاهده دیتاشیت ←

LM2904QDT

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-pin TSSOP
Same 2-channel architecture and TSSOP-8 footprint; ordering suffix and temperature-grade details differ, with no verified functional difference.

📋 جایگزین مرجع (خارج از کاتالوگ)

LM2904QDB

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-pin TSSOP
Same 2-channel architecture and TSSOP-8 footprint; suffix-specific qualification or temperature details differ, with no verified functional difference.

📋 جایگزین مرجع (خارج از کاتالوگ)

LM2904AQDR

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-pin TSSOP
Same automotive-compliant dual-amplifier family and TSSOP-8 footprint; exact suffix-specific limits differ by 0% in the verified channel and package architecture.

📋 جایگزین مرجع (خارج از کاتالوگ)

LM2904AQDT

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-pin TSSOP
Same automotive-compliant dual-amplifier family and TSSOP-8 footprint; ordering suffix and temperature-grade limits require confirmation.

📋 جایگزین مرجع (خارج از کاتالوگ)

LM2904AQTH-13 حداکثر مقادیر مجاز و مشخصات الکتریکی

Number of Amplifier Channels 2
Maximum Supply Voltage 36 V
جریان تغذیه 500 uA
Input Bias Current 20 nA
Listed Performance Rating 100 dB
Product Type Standard general-purpose operational amplifier
Automotive Compliance Automotive compliant
بسته‌بندی 8-pin TSSOP
نوع نصب Surface mount
Mold Compound Green

راهنمای پیکربندی پین LM2904AQTH-13 8-pin tssop

پیکربندی پین برای LM2904AQTH-13 (پکیج 8-pin tssop). این قطعه قدرت دارای پایانه‌های گیت، درین و سورس است. برای پکیج‌های غیرقطبی، برای جهت دقیق پین ۱ و جزئیات فوت‌پرینت به دیتاشیت سازنده مراجعه کنید. کاربردهای رایج شامل طراحی منبع تغذیه، درایو موتور و سوئیچینگ بار است.

نمودار پین‌آوت پکیج 8-pin tssop برای LM2904AQTH-13

داده پین‌آوت تفصیلی موجود نیست برای LM2904AQTH-13.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

LM2904AQTH-13 مناسب است برای 6 کاربردs: Automotive Sensor Signal Conditioning, Industrial Transducer Interface, Battery-Powered Monitoring Equipment, Current-Sense Amplification, Precision Active Filtering, Instrumentation and Data Acquisition.

🚗

Automotive Sensor Signal Conditioning

The LM2904AQTH-13 fits automotive sensing systems that require two low-power amplifier channels and a 36 V-class supply capability. Its two independent channels can amplify or condition related sensor signals while reducing the number of packages on the board. The automotive-compliant LM290xAQ family and compact 8-pin TSSOP format support space-conscious electronic control designs. Designers should place the amplifier close to the sensor interface, maintain a low-impedance ground return, and confirm that input common-mode voltage, output swing, temperature range, and transient protection meet the vehicle requirements.

🏭

Industrial Transducer Interface

The LM2904AQTH-13 is appropriate for amplifying low-level signals from industrial transducers when the interface operates from a supply rail above conventional logic levels. Its listed 500 uA supply current supports low-power instrumentation, while the 2-channel architecture supports matched signal paths or differential measurement. The 36 V maximum supply rating provides additional design headroom compared with many 5 V amplifiers. Exact input common-mode range, offset voltage, bandwidth, and output swing must be checked for the selected sensor and production test limits.

🔋

Battery-Powered Monitoring Equipment

The LM2904AQTH-13 can serve as the analog front end in portable industrial monitoring equipment where low supply current and compactness are important. The listed 500 uA supply current reduces the analog portion of the power budget, and the dual channels can process a measurement signal and a reference or second sensor. Because the package accepts a higher-voltage environment than ordinary low-voltage op amps, engineers can also evaluate it in protected higher-voltage monitoring designs. Confirm quiescent-current behavior over temperature and use the pinout when assigning power and input connections.

⚡

Current-Sense Amplification

The LM2904AQTH-13 is suitable for amplifying the small voltage produced by a current-sense shunt when two channels are needed for signal conditioning or diagnostic feedback. Its 20 nA listed input bias current helps limit input bias error with practical shunt networks, while the 2-channel configuration can reduce package count. The 36 V supply capability is useful around higher-voltage power systems when the amplifier's absolute maximum ratings and common-mode limits are respected. Keep shunt connections short and use a quiet ground to avoid converting common impedance into measurement error.

🔧

Precision Active Filtering

The LM2904AQTH-13 can implement active filters and gain stages where two matched amplifier channels simplify layout and preserve a consistent package count. The dual configuration is useful for second-order sections or paired conditioning paths, while the listed 20 nA input bias current supports reasonably high source impedances. Stable compensation, output loading, and the selected gain determine the achievable bandwidth. Verify the manufacturer's gain-bandwidth and stability guidance before increasing gain or adding capacitive loads, and place resistance and capacitance networks directly at the relevant pins.

📊

Instrumentation and Data Acquisition

The LM2904AQTH-13 is a practical choice for compact data-acquisition front ends that need two general-purpose analog channels, particularly when signals originate from higher-voltage industrial equipment. One channel can amplify a sensor output while the other handles buffering or gain conditioning. The TSSOP-8 package reduces board area, and the 500 uA listed supply current supports power-conscious acquisition modules. Validate input range, settling behavior, channel matching, and system calibration. Follow the manufacturer pin table and use short, shielded routes for sensitive measurement nodes.

خلاصه محصولات پیشنهادی

LM2904Q Same dual operational-amplifier family استفاده‌شده در: Automotive Sensor Signal Conditioning, Industrial Transducer Interface, Battery-Powered Monitoring Equipment, Current-Sense Amplification, Precision Active Filtering, Instrumentation and Data Acquisition LM2902Q Related quad operational-amplifier family استفاده‌شده در: Automotive Sensor Signal Conditioning, Industrial Transducer Interface, Battery-Powered Monitoring Equipment, Current-Sense Amplification, Precision Active Filtering, Instrumentation and Data Acquisition
What is the LM2904AQTH-13?
The LM2904AQTH-13 is a dual, general-purpose operational amplifier from Diodes Incorporated, with two independent channels in an 8-pin TSSOP package. According to the manufacturer LM2904Q datasheet, the LM2904AQ family is automotive compliant, and the dual devices are available in SO-8, TSSOP-8, and MSOP-8 packages using green mold compound.
How many amplifier channels does LM2904AQTH-13 have?
The LM2904AQTH-13 contains 2 independent operational-amplifier channels. The Diodes Incorporated LM2904Q datasheet identifies the device as a dual general-purpose amplifier, while distributor product information describes it as a 2-circuit amplifier in an 8-TSSOP package. Each channel can operate independently for signal conditioning or be interconnected for a larger circuit function.
What is the maximum supply voltage of LM2904AQTH-13?
The LM2904AQTH-13 is rated for a maximum supply voltage of 36 V according to the Mouser product listing. This higher voltage capability allows the dual op amp to interface with sensors and signal chains that operate above conventional 5 V or 3.3 V logic levels, provided the input and output conditions remain inside the device's absolute maximum ratings.
Is LM2904AQTH-13 automotive compliant?
Yes, the LM2904AQTH-13 belongs to the automotive-compliant LM290xAQ dual and quad operational-amplifier family. The Alldatasheet entry identifies the family description as automotive compliant, while the Diodes Incorporated datasheet covers LM2904Q and LM2904AQ devices in industry-standard pinouts. Vehicle applications should still be validated against all system-level qualification requirements.
Where can I download the LM2904AQTH-13 datasheet PDF?
The official Diodes Incorporated LM2904Q datasheet is available at https://www.diodes.com/datasheet/download/LM2904Q.pdf and covers the LM2904Q and LM2904AQ dual-device family. A second manufacturer-document copy is listed at https://www.lcsc.com/datasheet/C2059031.pdf. Use the pin-description and electrical-characteristics tables before assigning PCB tracks or finalizing a design.
Where can I find the LM2904AQTH-13 pinout?
The LM2904AQTH-13 pinout is defined in the pin-description section of the Diodes Incorporated LM2904Q datasheet. The device uses an industry-standard 8-pin TSSOP layout. Before routing the PCB, assign every physical pin from that table and verify the package drawing against the selected TSSOP-8 footprint rather than relying on a generic amplifier diagram.
What can replace the LM2904AQTH-13?
Pin-compatible LM2904AQ and LM2904Q TSSOP-8 family options are the most direct replacements for the LM2904AQTH-13 because they preserve the dual-amplifier configuration, 8-pin TSSOP footprint, and industry-standard pinout. Qualify each candidate against temperature grade, supply voltage, input bias current, offset voltage, and automotive requirements before production use. PCB changes are not expected when using the listed TSSOP-8 options.
Are LM2904QDR and LM2904AQTH-13 drop-in replacements?
LM2904QDR is a same-family TSSOP-8 alternative with the same 2-channel architecture and industry-standard pin arrangement, making it a pin-compatible replacement candidate for LM2904AQTH-13. Confirm the exact operating-temperature grade, qualification level, offset-voltage limit, and electrical limits for your application before substituting it into a production design.
What is the best TI equivalent for LM2904AQTH-13?
The verified cross-reference material does not identify a specific Texas Instruments part that can be confirmed as a drop-in replacement for LM2904AQTH-13. A candidate should be selected only if it uses the same 8-pin TSSOP footprint, preserves the dual-channel pinout, and satisfies the 36 V-class supply, bias-current, offset, noise, and automotive requirements. Do not approve an LM2904-family equivalent solely by function.
LM2904AQTH-13 vs LM324APWG4: which is better for a dual signal conditioner?
The LM2904AQTH-13 is generally the closer fit for a dual, TSSOP-8 signal conditioner because it contains 2 amplifier circuits in the same package format as the application requirement. The LM324APWG4 is listed as a 1-channel amplifier in a 14-TSSOP package, so it does not match the required channel count or footprint and is not a drop-in replacement for this design.
When should I choose LM2904AQTH-13 over another LM2904AQ option?
Choose LM2904AQTH-13 when the design requires a dual amplifier in an 8-pin TSSOP package with a 36 V listed maximum supply and automotive-compliant family construction. Select another family member when its documented temperature grade, qualification, reel or shipping format, or electrical limits better fit the product program. Confirm the suffix-specific ordering information before releasing a BOM.
Is LM2904AQTH-13 suitable for automotive sensor interfaces?
The LM2904AQTH-13 is suitable for consideration in automotive sensor-interface circuits because its family is automotive compliant and the device supports a 36 V maximum supply rating. Two channels can amplify or condition related sensor signals in a compact TSSOP package. Final suitability depends on temperature range, transient protection, noise performance, qualification status, and validation of the complete vehicle electronics environment.
What supply current and input bias current are listed for LM2904AQTH-13?
The Mouser listing identifies 500 uA supply current and 20 nA input bias current for the LM2904AQTH-13. The 500 uA value is useful for assessing overall dual-amplifier power demand, while the 20 nA bias-current figure helps characterize source-impedance sensitivity and input-stage error. Verify test conditions in the manufacturer datasheet for design calculations.
How should the LM2904AQTH-13 be placed on a PCB?
Place the LM2904AQTH-13 in a standard TSSOP-8 footprint with its pin-1 orientation matched to the manufacturer package drawing. Keep feedback and compensation networks close to their associated amplifier pins, provide a low-impedance ground return, and place bypass capacitors near the supply pins. Long feedback routes can increase parasitic feedback and reduce circuit stability.
What are the key specifications of LM2904AQTH-13?
The LM2904AQTH-13 combines 2 independent operational-amplifier channels, a 36 V maximum supply rating, 500 uA listed supply current, 20 nA listed input bias current, and an 8-pin TSSOP package. The Diodes Incorporated LM2904Q datasheet also identifies automotive-compliant LM290xAQ versions, industry-standard pinouts, and green mold compound as standard family characteristics.
Can I use LM2904AQTH-13 for industrial instrumentation?
The LM2904AQTH-13 can be used in industrial instrumentation when its input common-mode range, output swing, offset, noise, bandwidth, and temperature limits satisfy the signal path. Its 2 channels can reduce board area in differential amplifiers, filters, and sensor-conditioning circuits. Check the pinout in the manufacturer datasheet and verify grounding and protection requirements before production release.

داده‌های مرجع مهندسی برای LM2904AQTH-13 — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose LM2904AQTH-13 when the design needs two general-purpose amplifier channels, an 8-pin TSSOP footprint, and a 36 V listed maximum supply in an automotive-compliant family. LM2904QDR, LM2904QDT, and LM2904QDB are same-family TSSOP-8 candidates when their suffix-specific temperature and qualification requirements are a better fit. LM2904AQDR and LM2904AQDT are the closest AQ-family alternatives when retaining the automotive-compliant designation is important. Confirm the exact input offset, bias current, common-mode range, output swing, bandwidth, slew rate, operating-temperature range, and packaging code before releasing a substitution. The LM324APWG4 is not pin-compatible because it has 1 channel in a 14-pin TSSOP. Always compare the selected manufacturer's latest datasheet and perform standard qualification for production use.

مقایسه با جایگزین‌ها

پارامتر این محصول LM2904QDR LM2904QDT LM2904QDB LM2904AQDR LM2904AQDT
Brand Diodes Incorporated Diodes Incorporated Diodes Incorporated Diodes Incorporated Diodes Incorporated Diodes Incorporated
Package 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP
Amplifier Channels 2 2 2 2 2 2
Product Type Standard general-purpose operational amplifier General-purpose dual operational amplifier General-purpose dual operational amplifier General-purpose dual operational amplifier Automotive-compliant dual operational amplifier Automotive-compliant dual operational amplifier

تفاوت‌های کلیدی

  • Dual automotive-compliant amplifier in a compact TSSOP-8 package (در مقابلLM324APWG4)
  • Higher listed maximum supply capability than conventional low-voltage amplifiers (در مقابلLM2904QDR)
  • Automotive-compliant family construction (در مقابلLM2904QDB)

یادداشت‌های طراحی

Use the manufacturer pin-description table to assign every TSSOP-8 connection before routing the PCB. Place input, output, feedback, compensation, and bypass components close to their associated pins. Keep feedback traces short, provide a direct ground return, and maintain a continuous ground reference beneath the device where the board outline permits. These practices reduce parasitic feedback, channel crosstalk, and sensitivity to ground impedance.

Rated for a 36 V maximum supply, the LM2904AQTH-13 must still be protected from supply transients and accidental overvoltage. Confirm the absolute maximum supply rating, input common-mode range, output swing, and power dissipation under the worst operating condition. Estimated: with a 36 V input and a 5 V output at 1 mA total load, linear dissipation is approximately 31 mW before allowing for the amplifier's own supply current; confirm actual load and thermal limits in the completed design.

Do not infer that all LM2904 suffixes have identical temperature, qualification, or shipment requirements. Check each replacement's suffix-specific ordering information, electrical limits, and automotive qualification status. Also verify that the selected TSSOP-8 land pattern matches the manufacturer's pin-1 orientation and exposed-pad requirements. Functional equivalence alone is insufficient for a production substitution.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The LM290xAQ family is identified as automotive compliant, and the manufacturer datasheet states that green mold compound is standard. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not present in the verified product data.

تاریخ تأیید داده‌ها: 2026-11-09 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

LM2904AQTH-13 datasheet LM2904AQTH-13 datasheet pdf LM2904AQTH-13 pinout LM2904AQTH-13 equivalent LM2904AQTH-13 replacement LM2904AQTH-13 cross reference LM2904AQTH-13 TSSOP-8 footprint LM2904AQTH-13 36V op amp LM2904AQTH-13 automotive sensor interface Diodes Incorporated LM2904AQTH-13 LM2904AQTH-13 price LM2904AQTH-13 stock LM2904AQTH-13 vs LM324APWG4 LM2904AQTH-13 application circuit

قطعات و اصطلاحات مرتبط

Diodes Incorporated LM2904AQTH-13 LM2904AQDR LM2904AQDT LM2904QDR LM2904QDT LM2904QDB LM324APWG4 LM2904Q LM2902Q operational amplifier op amp dual amplifier analog integrated circuit signal conditioning current-sense amplifier active filter TSSOP-8 surface-mount package 36 V power supply 500 uA supply current 20 nA input bias current automotive-compliant electronics green mold compound
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ