LM2904AQTH-13 - Dual 36V Automotive Op Amp | Diodes Incorporated
料号: LM2904AQTH-13 ✓ 量产中LM2904AQTH-13 概述
An operational amplifier, commonly called an op amp, is an analog integrated circuit that compares an inverting input with a non-inverting input and drives its output toward the difference between them, amplified by a high open-loop gain. The LM2904AQ family contains independent dual amplifiers designed for general-purpose signal conditioning. Its two channels can process separate signals or be configured together for differential, filtering, comparator-style, and amplifier functions.
The LM2904AQTH-13 combines two amplifier circuits in one compact package. Manufacturer listings identify a maximum supply voltage of 36 V, a supply current of 500 uA, an input bias current of 20 nA, and a 100 dB listed performance rating. These characteristics support low-power signal-chain designs operating from higher-voltage rails than typical 5 V or 3.3 V analog circuits, including industrial sensing, vehicle electronics, instrumentation, and low-level signal conditioning.
The device belongs to the LM290xAQ automotive-compliant dual and quad operational-amplifier family. The LM2904Q and LM2904AQ dual versions are offered in SO-8, TSSOP-8, and MSOP-8 package options, while quad LM2902 devices use 14-pin packages. Industry-standard pinouts and green mold compound support compact surface-mount implementation and environmentally conscious manufacturing practices.
Typical applications include automotive sensor interfaces, industrial transducers, battery-powered monitoring equipment, current sensing, signal amplification, and active filtering. The two independent channels allow one device to handle a differential measurement path or two related analog channels while reducing component count. Designers should still verify input common-mode range, output swing, stability, and absolute maximum ratings for the chosen operating conditions.
For PCB design, place input, output, bypass, and compensation components close to their associated pins, then observe the pinout and layout guidance in the manufacturer datasheet. A clean grounding strategy and short feedback routes are especially important because long traces can introduce parasitic feedback, offset, and instability in high-gain amplifier configurations.
This product page combines package, application, sourcing, and replacement guidance with practical design considerations. It is intended to help engineers identify the correct automotive dual op amp, verify the 8-pin TSSOP footprint, compare pin-compatible family options, and plan a stable surface-mount implementation without changing the PCB land pattern.
直接替换替代料: LM2904AQTH-13 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: LM2904AQTH-13 (相同外形与封装尺寸) ——差异在于 Input Bias Current, Package.
LM2904QDRQ1
✅ 直接替换 ⚠️ 规格未核验✗ 无现货
$0.22 / 个
查看数据手册 →LM2904QDT
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
LM2904QDB
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
LM2904AQDR
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
LM2904AQDT
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
LM2904AQTH-13 最大额定值与电气特性
| Number of Amplifier Channels | 2 |
| Maximum Supply Voltage | 36 V |
| 电源电流 | 500 uA |
| Input Bias Current | 20 nA |
| Listed Performance Rating | 100 dB |
| Product Type | Standard general-purpose operational amplifier |
| Automotive Compliance | Automotive compliant |
| 封装 | 8-pin TSSOP |
| 安装类型 | Surface mount |
| Mold Compound | Green |
LM2904AQTH-13 8-pin tssop 引脚配置指南
LM2904AQTH-13(8-pin tssop 封装)的引脚配置。 该功率器件具有栅极、漏极和源极端子。对于无极性封装,请参阅制造商数据手册以了解确切的引脚 1 方向和封装尺寸细节。常见应用包括电源设计、电机驱动和负载开关。
暂无详细引脚数据: LM2904AQTH-13.
请参阅 数据手册 以查看完整引脚配置。
典型应用
LM2904AQTH-13 适用于 6 应用s: Automotive Sensor Signal Conditioning, Industrial Transducer Interface, Battery-Powered Monitoring Equipment, Current-Sense Amplification, Precision Active Filtering, Instrumentation and Data Acquisition.
Automotive Sensor Signal Conditioning
The LM2904AQTH-13 fits automotive sensing systems that require two low-power amplifier channels and a 36 V-class supply capability. Its two independent channels can amplify or condition related sensor signals while reducing the number of packages on the board. The automotive-compliant LM290xAQ family and compact 8-pin TSSOP format support space-conscious electronic control designs. Designers should place the amplifier close to the sensor interface, maintain a low-impedance ground return, and confirm that input common-mode voltage, output swing, temperature range, and transient protection meet the vehicle requirements.
推荐
Industrial Transducer Interface
The LM2904AQTH-13 is appropriate for amplifying low-level signals from industrial transducers when the interface operates from a supply rail above conventional logic levels. Its listed 500 uA supply current supports low-power instrumentation, while the 2-channel architecture supports matched signal paths or differential measurement. The 36 V maximum supply rating provides additional design headroom compared with many 5 V amplifiers. Exact input common-mode range, offset voltage, bandwidth, and output swing must be checked for the selected sensor and production test limits.
推荐
Battery-Powered Monitoring Equipment
The LM2904AQTH-13 can serve as the analog front end in portable industrial monitoring equipment where low supply current and compactness are important. The listed 500 uA supply current reduces the analog portion of the power budget, and the dual channels can process a measurement signal and a reference or second sensor. Because the package accepts a higher-voltage environment than ordinary low-voltage op amps, engineers can also evaluate it in protected higher-voltage monitoring designs. Confirm quiescent-current behavior over temperature and use the pinout when assigning power and input connections.
推荐
Current-Sense Amplification
The LM2904AQTH-13 is suitable for amplifying the small voltage produced by a current-sense shunt when two channels are needed for signal conditioning or diagnostic feedback. Its 20 nA listed input bias current helps limit input bias error with practical shunt networks, while the 2-channel configuration can reduce package count. The 36 V supply capability is useful around higher-voltage power systems when the amplifier's absolute maximum ratings and common-mode limits are respected. Keep shunt connections short and use a quiet ground to avoid converting common impedance into measurement error.
推荐
Precision Active Filtering
The LM2904AQTH-13 can implement active filters and gain stages where two matched amplifier channels simplify layout and preserve a consistent package count. The dual configuration is useful for second-order sections or paired conditioning paths, while the listed 20 nA input bias current supports reasonably high source impedances. Stable compensation, output loading, and the selected gain determine the achievable bandwidth. Verify the manufacturer's gain-bandwidth and stability guidance before increasing gain or adding capacitive loads, and place resistance and capacitance networks directly at the relevant pins.
推荐
Instrumentation and Data Acquisition
The LM2904AQTH-13 is a practical choice for compact data-acquisition front ends that need two general-purpose analog channels, particularly when signals originate from higher-voltage industrial equipment. One channel can amplify a sensor output while the other handles buffering or gain conditioning. The TSSOP-8 package reduces board area, and the 500 uA listed supply current supports power-conscious acquisition modules. Validate input range, settling behavior, channel matching, and system calibration. Follow the manufacturer pin table and use short, shielded routes for sensitive measurement nodes.
推荐
推荐产品汇总
工程参考数据: LM2904AQTH-13 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | LM2904QDR | LM2904QDT | LM2904QDB | LM2904AQDR | LM2904AQDT |
|---|---|---|---|---|---|---|
| Brand | Diodes Incorporated | Diodes Incorporated | Diodes Incorporated | Diodes Incorporated | Diodes Incorporated | Diodes Incorporated |
| Package | 8-pin TSSOP | 8-pin TSSOP | 8-pin TSSOP | 8-pin TSSOP | 8-pin TSSOP | 8-pin TSSOP |
| Amplifier Channels | 2 | 2 | 2 | 2 | 2 | 2 |
| Product Type | Standard general-purpose operational amplifier | General-purpose dual operational amplifier | General-purpose dual operational amplifier | General-purpose dual operational amplifier | Automotive-compliant dual operational amplifier | Automotive-compliant dual operational amplifier |
关键差异点
- Dual automotive-compliant amplifier in a compact TSSOP-8 package (对比 LM324APWG4)
- Higher listed maximum supply capability than conventional low-voltage amplifiers (对比 LM2904QDR)
- Automotive-compliant family construction (对比 LM2904QDB)
设计说明
Use the manufacturer pin-description table to assign every TSSOP-8 connection before routing the PCB. Place input, output, feedback, compensation, and bypass components close to their associated pins. Keep feedback traces short, provide a direct ground return, and maintain a continuous ground reference beneath the device where the board outline permits. These practices reduce parasitic feedback, channel crosstalk, and sensitivity to ground impedance.
Rated for a 36 V maximum supply, the LM2904AQTH-13 must still be protected from supply transients and accidental overvoltage. Confirm the absolute maximum supply rating, input common-mode range, output swing, and power dissipation under the worst operating condition. Estimated: with a 36 V input and a 5 V output at 1 mA total load, linear dissipation is approximately 31 mW before allowing for the amplifier's own supply current; confirm actual load and thermal limits in the completed design.
Do not infer that all LM2904 suffixes have identical temperature, qualification, or shipment requirements. Check each replacement's suffix-specific ordering information, electrical limits, and automotive qualification status. Also verify that the selected TSSOP-8 land pattern matches the manufacturer's pin-1 orientation and exposed-pad requirements. Functional equivalence alone is insufficient for a production substitution.
合规信息
The LM290xAQ family is identified as automotive compliant, and the manufacturer datasheet states that green mold compound is standard. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not present in the verified product data.