Analog Devices

MAX313CUE+ - Quad SPST CMOS Analog Switch | ADI

MPN: MAX313CUE+ ✓ Nakahanda
4.5 V to 30 V Vdss 10 ohms maximum Rds(on) 16-pin TSSOP Package
MOQ: 1 |

MAX313CUE+ Ulas

Analog Devices MAX313CUE+ is a quad SPST CMOS analog switch with four independently controlled normally open channels, a maximum on-resistance of 10 ohms, and a 16-pin TSSOP package. It supports single-supply operation from 4.5 V to 30 V and dual-supply operation from -4.5 V to -20 V and +4.5 V to +20 V. Typical on-resistance is 6.5 ohms, while guaranteed channel matching is 1.5 ohms maximum.

A CMOS analog switch is a voltage-controlled semiconductor device that routes analog or digital signals between circuit nodes. The MAX313 belongs to the analog switch and multiplexer hierarchy, where an analog switch performs point-to-point routing and a multiplexer connects multiple signals to a common channel. Its SPST configuration provides one normally open path per switch, making it suitable for isolation, signal selection, test-fixture routing, and bidirectional analog-signal control.

The four channels can conduct equally well in either direction. The MAX313CUE+ combines low on-resistance with channel-to-channel matching of 1.5 ohms maximum and on-resistance flatness of 2 ohms maximum over the specified signal range. These characteristics help minimize gain error and distortion when several switched channels must present similar resistance to downstream circuitry. It also provides low leakage and low power consumption for precision and power-sensitive systems.

The MAX313 family operates from a wide supply range and supports rail-to-rail signal handling. According to the Analog Devices MAX313 product page, the devices are pin compatible with the DG411, DG412, and DG413 families. The manufacturer also specifies guaranteed ESD protection greater than 2000 V per Method 3015.7 and crosstalk above 96 dB at 20 kHz, helping protect sensitive analog paths and limit interaction between adjacent channels.

Typical uses include precision test and measurement systems, analog signal-conditioning modules, battery-powered instrumentation, industrial control interfaces, and signal-isolation networks. The device can route sensor outputs, test signals, or external inputs without introducing the continuous power loss associated with a permanently conducting analog path. It is particularly useful when signal integrity, repeatable channel resistance, and low off-state leakage are more important than maximum switching speed.

When laying out a MAX313CUE+ board, follow the TSSOP-16 pin-assignment table in the manufacturer datasheet and keep high-impedance routes short to minimize leakage pickup. Place supply decoupling close to the device, and evaluate switching transients when the source impedance is high. The normally open architecture requires the correct drive polarity at each control input; consult the control-input truth table before changing logic levels.

This product record combines the manufacturer specifications, package information, replacement references, and practical design guidance into one engineering-focused view. It also identifies same-package alternatives and explains when their electrical or environmental differences matter, helping designers select the correct switch without introducing a footprint change.

Mga alternatibo na pwedeng ilagay na MAX313CUE+ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

MAX313EUE+

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 TSSOP-16
Same MAX313 quad SPST electrical family and TSSOP-16 pinout; temperature grade differs from the commercial MAX313CUE+ version, so the operating-temperature limit must be checked.

📋 Alternatibo na Reference (hindi sa katalogo)

MAX313LEUE+

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 TSSOP-16
Same MAX313 quad SPST electrical family and TSSOP-16 pinout; the L-grade suitability differs from MAX313CUE+, while the core 10 ohm maximum on-resistance rating remains the compatibility basis.

📋 Alternatibo na Reference (hindi sa katalogo)

MAX313LEUE+T

✅ Drop-In
📦 TSSOP-16
Same MAX313 family, 10 ohm maximum on-resistance architecture, and TSSOP-16 footprint; the +T ordering form adds a tape-and-reel manufacturing format and uses the L grade.

📋 Alternatibo na Reference (hindi sa katalogo)

DG411LE+

✅ Drop-In
📦 TSSOP-16
Pin-compatible DG411-family replacement with a comparable low on-resistance architecture; MAX313 has a 30 V maximum single-supply rating versus the higher DG411-family supply rating, requiring operating-voltage verification.

📋 Alternatibo na Reference (hindi sa katalogo)

DG412LE+

✅ Drop-In
📦 TSSOP-16
Pin-compatible DG412-family alternative in the same TSSOP-16 footprint; it retains the low-resistance quad-switch function, while the higher family supply rating differs from the MAX313CUE+ 30 V maximum.

📋 Alternatibo na Reference (hindi sa katalogo)

DG413LE+

✅ Drop-In
📦 TSSOP-16
Pin-compatible DG413-family alternative in the same TSSOP-16 footprint; the low on-resistance topology is comparable, but its higher maximum supply rating requires checking against the MAX313CUE+ 30 V limit.

📋 Alternatibo na Reference (hindi sa katalogo)

MAX313CUE+ Mga Pinakamataas na Rating at Electrical Characteristics

Number of Switches 4 channels
Switch Configuration 4 x SPST normally open
On-Resistance 10 ohms maximum
Typical On-Resistance 6.5 ohms
On-Resistance Matching Between Channels 1.5 ohms maximum
On-Resistance Flatness 2 ohms maximum over specified signal range
Single-Supply Operating Range 4.5 V to 30 V
Dual-Supply Operating Range -4.5 V to -20 V and +4.5 V to +20 V
Signal Handling Rail-to-rail
ESD Protection >2000 V per Method 3015.7
Crosstalk >96 dB at 20 kHz
Conduction Direction Bidirectional
Packhaging 16-pin TSSOP
Uri ng Pagpapasok Surface mount
Off-State Leakage 2.5 nA at +85 degrees C

Gabay sa Pin Configuration ng MAX313CUE+ 16-pin tssop

Pin configuration para sa MAX313CUE+ (16-pin tssop package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 16-pin tssop package para sa MAX313CUE+

Wala ng detalyadong pinout data na magagamit para sa MAX313CUE+.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MAX313CUE+ ay nararapat para sa 6 aplikasyons: Precision Test and Measurement Systems, Analog Signal Conditioning, Battery-Powered Instrumentation, Industrial Control and Sensor Interface, Automated Test Fixture Signal Routing, Signal Isolation and Safety Routing.

🖥️

Precision Test and Measurement Systems

MAX313CUE+ fits switch matrices and measurement fixtures that must route several test signals with predictable resistance. Its 6.5 ohms typical on-resistance, 1.5 ohms maximum matching between channels, and 2 ohms maximum flatness reduce channel-dependent gain variation. The four SPST channels can independently connect a source, instrument input, or calibration node. Because the device supports rail-to-rail signal handling, it can be placed near the measured signal rather than deep inside a remote analog section. The design should still account for switch charge injection and leakage when the connected source impedance is high.

📡

Analog Signal Conditioning

MAX313CUE+ can route sensor outputs, reference signals, or amplifier inputs through a selectable conditioning network. Its maximum on-resistance of 10 ohms and typical value of 6.5 ohms are low compared with many analog switch networks, limiting voltage division when the downstream input impedance is substantially higher. Matching of 1.5 ohms maximum helps maintain similar transfer behavior across four channels. For high-gain signal paths, place the switch close to the amplifier input and keep the disabled channel's leakage from contributing to offset errors. The actual error budget should include the source impedance and amplifier input bias current.

📱

Battery-Powered Instrumentation

MAX313CUE+ is appropriate for portable measurement equipment that needs to disconnect external inputs to reduce loading, leakage, or unwanted signal paths. The MAX313 family's low-leakage behavior is identified as 2.5 nA at +85 degrees C, helping preserve accuracy when high-impedance sensors are disconnected. Four independently controlled SPST paths let one microcontroller or analog front end select among probes or test channels. Single-supply operation from 4.5 V to 30 V covers battery-derived rails and higher industrial rails when appropriate. Designers should confirm the control levels and operating-temperature grade for the intended enclosure and battery-charging environment.

🏭

Industrial Control and Sensor Interface

MAX313CUE+ can isolate or select signals at the boundary between an industrial controller and external sensor wiring. The normally open SPST configuration prevents a connected signal from driving the source when the switch is off, while bidirectional conduction supports use with either digital or analog signals. Its 10 ohms maximum on-resistance is suitable for many low- and medium-impedance industrial interfaces. Rail-to-rail handling supports signals extending across the supply rails. For long external cables, however, surge and ESD requirements must be evaluated separately, and the manufacturer-rated greater-than-2000 V ESD protection should not be treated as a complete industrial surge solution.

🔧

Automated Test Fixture Signal Routing

MAX313CUE+ supports automated fixtures that connect DUT pins, supplies, or external loads under software control. The four channels provide independently isolated routing paths, and the 1.5 ohms maximum channel matching can improve repeatability across multiple fixture positions. The specified on-resistance flatness of 2 ohms helps limit distortion when signals occupy a significant portion of the available signal range. The TSSOP-16 package supports compact fixture electronics close to the DUT. Keep routed lines short, maintain a continuous ground reference, and validate switching transients and charge injection at the speed and source impedance used by the test system.

💊

Signal Isolation and Safety Routing

MAX313CUE+ can disconnect a signal source to establish a higher-impedance state in instrumentation and signal-conditioning equipment. Its normally open topology and low off-state leakage help reduce unintended coupling when a channel is inactive. The MAX313 family's greater-than-2000 V ESD protection rating adds device-level robustness, while the 10 ohms maximum on-resistance keeps the conducting-state loss modest. Isolation in this context is functional signal disconnection rather than a reinforced safety barrier; creepage, clearance, insulation, and applicable medical or industrial isolation requirements must be handled separately by the complete system design.

Buod ng mga Inirekomendang Produkto

DG411LE+ Pin-compatible low-resistance analog-switch alternative Ginagamit sa: Precision Test and Measurement Systems, Analog Signal Conditioning, Industrial Control and Sensor Interface, Automated Test Fixture Signal Routing DG412LE+ Pin-compatible switch for multiplexer structures Ginagamit sa: Precision Test and Measurement Systems, Industrial Control and Sensor Interface DG413LE+ Pin-compatible low-resistance routing alternative Ginagamit sa: Precision Test and Measurement Systems, Industrial Control and Sensor Interface, Signal Isolation and Safety Routing MAX313EUE+ Same-family extended-temperature MAX313 option Ginagamit sa: Analog Signal Conditioning, Automated Test Fixture Signal Routing MAX313LEUE+ Same-family MAX313 grade option Ginagamit sa: Battery-Powered Instrumentation, Signal Isolation and Safety Routing MAX313LEUE+T Tape-and-reel MAX313 family manufacturing option Ginagamit sa: Battery-Powered Instrumentation
What is MAX313CUE+?
MAX313CUE+ is a four-channel, normally open SPST CMOS analog switch from Analog Devices. It provides a maximum on-resistance of 10 ohms, 6.5 ohms typical on-resistance, and bidirectional signal conduction in a 16-pin TSSOP package. According to the MAX313 manufacturer product page, the device supports single-supply operation from 4.5 V to 30 V, dual-supply operation from -4.5 V to -20 V and +4.5 V to +20 V, and rail-to-rail signal handling.
Where can I download the MAX313CUE+ datasheet PDF?
The official MAX313CUE+ documentation is available from the Analog Devices MAX313 product page at analog.com/en/products/MAX313.html. The manufacturer page links the MAX313 data sheet and product resources. The MAX313CUE+ is the 16-pin TSSOP ordering version of the MAX313 family, so engineers should use the MAX313 manufacturer datasheet for its pin description, electrical characteristics, control truth table, and typical application circuits.
Where can I find the MAX313CUE+ pinout?
Use the pin-description table in the MAX313 manufacturer datasheet to assign the 16 TSSOP pins accurately. The verified product information identifies a 16-pin TSSOP package but does not reproduce every pin name, so this page does not present an unverified pin table. The package diagram library uses the TSSOP-16 footprint. Confirm the control pins, common terminals, and switched terminals directly against the manufacturer pin description before laying out tracks or assigning control logic.
What are the key specifications of MAX313CUE+ that engineers should know?
The MAX313CUE+ combines four SPST normally open channels, 10 ohms maximum on-resistance, 6.5 ohms typical on-resistance, and 1.5 ohms maximum matching between channels in a 16-pin TSSOP package. According to the Analog Devices MAX313 product page, it also provides 2 ohms maximum on-resistance flatness, ESD protection greater than 2000 V per Method 3015.7, and crosstalk above 96 dB at 20 kHz. These parameters are the primary considerations for gain error, channel matching, leakage, and signal isolation.
Is MAX313CUE+ pin compatible with DG411, DG412, and DG413?
Yes, the Analog Devices MAX313 product page explicitly states that MAX313 is pin compatible with DG411, DG412, and DG413. Compatibility means the devices share the same package and pin arrangement, but it does not mean every electrical characteristic is identical. The MAX313 specification includes a 10 ohms maximum on-resistance and 1.5 ohms maximum channel matching. Review the supply limits, control logic, leakage, and switch configuration in each candidate datasheet before approving a cross-family substitution.
What is the difference between MAX313CUE+ and MAX313EUE+?
MAX313EUE+ is a same-family MAX313 variant that retains the quad SPST architecture and TSSOP-16 footprint while targeting a different temperature grade. The exact grade and operating-temperature limits must be confirmed in the manufacturer ordering table before substitution. MAX313CUE+ is the commercial ordering version with a 4.5 V to 30 V single-supply range, 10 ohms maximum on-resistance, and rail-to-rail signal handling. Use the temperature-grade requirements of the end product as the deciding criterion.
When should I choose MAX313CUE+ over a DG411-family device?
Choose MAX313CUE+ when the design benefits from the MAX313 family's specified 6.5 ohms typical on-resistance, 1.5 ohms maximum channel matching, 2 ohms maximum flatness, and greater than 96 dB crosstalk at 20 kHz. The Analog Devices product page also identifies the MAX313 as pin compatible with the DG411 family. Select a DG411-family alternative instead when its particular control polarity, supply range, temperature grade, or lifecycle status better matches the complete system requirements and has been verified for the intended footprint.
Is MAX313CUE+ suitable for precision test and measurement systems?
MAX313CUE+ is suitable for precision test and measurement paths where channel resistance must remain consistent. Its 6.5 ohms typical on-resistance, 1.5 ohms maximum matching between channels, and 2 ohms maximum flatness help limit gain variation and distortion across switched inputs. According to the MAX313 manufacturer product page, the device also offers rail-to-rail signal handling and low leakage. The surrounding amplifier, source impedance, grounding, and control-signal timing still determine the total measurement error.
What is the best drop-in replacement for MAX313CUE+?
The closest drop-in choices include same-package MAX313 family variants and the pin-compatible DG411, DG412, and DG413 families identified by Analog Devices. No universal replacement exists without considering temperature grade, control polarity, supply range, and exact ordering suffix. A valid replacement must retain the 16-pin TSSOP footprint, four-channel SPST function, and required voltage ratings. Confirm the candidate against the MAX313 pin description and electrical characteristics before committing it to a production PCB.
Can DG411 replace MAX313CUE+ on the same PCB?
A suitable DG411-family device can share the MAX313 footprint because the Analog Devices MAX313 product page states that the families are pin compatible. However, pin compatibility does not eliminate the need to compare electrical behavior. Confirm the maximum supply voltage, on-resistance, leakage, control-input levels, switching time, and channel matching against the MAX313CUE+ requirements. The cross-family device is appropriate only when all critical parameters remain within the design limits.
Where can I buy MAX313CUE+ online?
Use the Request a Quote form on this page to request MAX313CUE+ pricing, availability, current lead time, and minimum order quantity. The form provides a single route for a quote based on the exact MAX313CUE+ ordering code and TSSOP-16 package. Confirm the requested suffix, manufacturer packaging format, quantity, and delivery requirements in the inquiry so the quotation corresponds to the component intended for the production BOM.
What is the price of MAX313CUE+?
Submit the exact MAX313CUE+ part number and required quantity through the Request a Quote form on this page for current pricing. Pricing can vary with manufacturer packaging, order quantity, sourcing condition, and market availability. The form is the appropriate path for obtaining a current, configuration-specific quotation rather than relying on a static price figure that may become stale. Include the desired shipment date if the device is supporting a production schedule.
What is the lead time for MAX313CUE+?
Request the current MAX313CUE+ lead time through the Request a Quote form on this page. Lead time depends on order quantity, factory inventory, packaging format, and the selected delivery terms, so it should be confirmed for the current order rather than inferred from a historical listing. Include your required delivery date and annual usage in the request. This lets the supplier evaluate the exact MPN and quantity against the requested schedule.
Is MAX313CUE+ in stock?
Submit an inquiry through the Request a Quote form on this page to check current availability for MAX313CUE+. Stock status changes with factory position, distribution activity, order quantity, and packaging requirements. State the quantity, preferred shipment date, and acceptable manufacturing-packaging format in the request. The inquiry should use the complete MAX313CUE+ MPN to avoid confusion with other MAX313 package, grade, or reel-code variants.
Does MAX313CUE+ comply with RoHS and automotive qualification requirements?
The MAX313CUE+ is a commercial Analog Devices part, but the verified product information does not state its RoHS, REACH, or AEC-Q100 classification. Do not infer automotive qualification from the MAX313 family name or from a distributor category label. Request the current manufacturer material-declaration and qualification records for the exact ordering code, and specify any AEC-Q100 requirement before using the device in an automotive design. Compliance should also be checked against the assembled product's regional obligations.
How should MAX313CUE+ be laid out for low leakage and low noise?
Place the MAX313CUE+ close to the source and destination of the switched signal, and keep high-impedance nodes short to minimize capacitive pickup and leakage-related errors. Route the four channels to avoid long parallel runs where switching transients could couple into adjacent signals. Follow the manufacturer datasheet for supply decoupling and control-pin assignment. Use a solid ground-plane strategy, maintain consistent return paths, and evaluate switch charge injection when the source impedance is high enough to amplify injected error.

Impormasyon ng Talumpati sa Engineering for MAX313CUE+ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose MAX313CUE+ for a four-channel, normally open SPST design that requires a 16-pin TSSOP footprint, a 10 ohm maximum on-resistance, 6.5 ohms typical resistance, and guaranteed channel matching of 1.5 ohms maximum. Select MAX313EUE+ when the same electrical family is needed but an extended-temperature ordering grade is more appropriate, or MAX313LEUE+ when its qualification class fits the application. Use MAX313LEUE+T when the exact same-family grade is required in a tape-and-reel manufacturing format. Consider DG411LE+, DG412LE+, or DG413LE+ when their verified electrical characteristics, control logic, and lifecycle status provide a better match; the manufacturer identifies these families as pin compatible with MAX313. In every case, verify the exact ordering suffix, TSSOP-16 pinout, supply rating, temperature limits, leakage, and control-input thresholds before approving a substitution.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MAX313EUE+ MAX313LEUE+ DG411LE+
Package TSSOP-16 TSSOP-16 TSSOP-16 TSSOP-16
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Number of Channels 4 channels 4 channels 4 channels 4 channels
Switch Configuration 4 x SPST normally open 4 x SPST normally open 4 x SPST normally open 4 x SPST
Maximum On-Resistance 10 ohms 10 ohms 10 ohms Not specified in the verified product information
Typical On-Resistance 6.5 ohms 6.5 ohms 6.5 ohms Not specified in the verified product information
Single-Supply Maximum 30 V 30 V 30 V Not specified in the verified product information
On-Resistance Matching 1.5 ohms maximum 1.5 ohms maximum 1.5 ohms maximum Not specified in the verified product information
On-Resistance Flatness 2 ohms maximum over specified signal range 2 ohms maximum over specified signal range 2 ohms maximum over specified signal range Not specified in the verified product information
ESD Protection >2000 V per Method 3015.7 >2000 V per Method 3015.7 >2000 V per Method 3015.7 Not specified in the verified product information

Pangunahing mga Pagkakaiba

  • Lower typical conduction resistance (kumpara saDG411LE+)
  • Guaranteed channel matching (kumpara saDG412LE+)
  • Specified on-resistance flatness (kumpara saDG413LE+)
  • Broad dual-supply operating capability (kumpara saMAX313EUE+)

Talaan ng Disenyo

Place the MAX313CUE+ close to the switched-signal source and destination, and keep connected traces short. Long, high-impedance routes increase capacitive pickup from control edges and can magnify charge injection when the source impedance is high. Use the pin-description and typical application diagrams in the MAX313 manufacturer datasheet when assigning the TSSOP-16 footprint. Keep the ground return continuous under and around the device so switching current does not share a high-impedance path with the analog signal.

Include the switch on-resistance, source impedance, and load impedance in the gain-error calculation. The MAX313CUE+ has 6.5 ohms typical and 10 ohms maximum on-resistance, so using only the typical value can understate divider error at the guaranteed limit. Because channel matching is specified at 1.5 ohms maximum and flatness at 2 ohms maximum, use those limits when comparing measurement channels. For a 10 kilohm source, the maximum 10 ohm switch resistance changes the divider ratio by approximately 0.1%.

Do not treat the normally open SPST switch as a low-impedance permanent connection. Verify the control truth table and logic levels from the MAX313 manufacturer datasheet before driving the control inputs. Also distinguish the MAX313CUE+ commercial ordering code from same-family extended-temperature or tape-and-reel variants. The physical TSSOP-16 footprint can remain unchanged, but temperature grade, qualification, order packing, and supply limits can differ between suffixes.

Analyze adjacent-channel coupling and control-edge energy rather than relying only on the 96 dB crosstalk figure at 20 kHz. The specified crosstalk condition is frequency-dependent and does not represent every practical signal bandwidth, source impedance, or PCB routing environment. Keep the unused channel properly driven or terminated according to the manufacturer truth table, maintain short control traces, and use a quiet ground reference. Validate fast-switching nodes with an oscilloscope in the final layout because package and trace parasitic effects can influence observed transient behavior.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The verified product information does not explicitly state the RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status of MAX313CUE+. The plus suffix alone should not be treated as a complete compliance declaration. Request current manufacturer material-declaration and qualification records for the exact ordering code.

Data napatotohanan sa: 2026-11-09 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MAX313CUE+ datasheet MAX313CUE+ datasheet pdf MAX313CUE+ pinout MAX313CUE+ equivalent MAX313CUE+ replacement MAX313CUE+ cross reference MAX313CUE+ footprint MAX313CUE+ price MAX313CUE+ stock Analog Devices MAX313CUE+ MAX313 TSSOP-16 analog switch MAX313CUE+ vs DG411LE+ MAX313CUE+ precision signal routing MAX313CUE+ 30V analog switch MAX313CUE+ application circuit

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices MAX313CUE+ MAX313EUE+ MAX313LEUE+ MAX313LEUE+T DG411LE+ DG412LE+ DG413LE+ analog switch CMOS analog switch SPST switch normally open switch multiplexer interface IC semiconductor TSSOP-16 TSSOP family surface-mount package SMD package on-resistance on-resistance matching on-resistance flatness rail-to-rail signal handling crosstalk ESD protection Method 3015.7 single-supply operation dual-supply operation precision test and measurement industrial signal routing
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ