Analog Devices

MAX232AEUE+ - 5V RS-232 Transceiver | Analog Devices

MPN: MAX232AEUE+ ✓ Nakahanda
4.5 V to 5.5 V Vdss 16-pin TSSOP Package
MOQ: 1 |

MAX232AEUE+ Ulas

The Analog Devices MAX232AEUE+ is a +5 V-powered, 2-driver/2-receiver RS-232 transceiver packaged in a 16-pin TSSOP. It provides a full RS-232 interface for systems that need bidirectional serial communication over single-ended, unbalanced lines. The device operates from a 4.5 V to 5.5 V supply and is identified by Analog Devices as a production part in the MAX232A family. Its compact surface-mount package suits industrial controllers, data-acquisition equipment, service interfaces, and embedded systems where board area is constrained.

An RS-232 transceiver is an interface IC that combines line drivers and line receivers with the charge-pump circuitry required to generate the positive and negative voltages used by RS-232 ports. A transmitter converts logic-level signals into RS-232 levels, while a receiver converts RS-232 inputs back into logic levels. The MAX232AEUE+ therefore provides a complete point-to-point or multipoint serial interface in one device rather than requiring separate driver and receiver components.

The principal configuration is two transmit channels and two receive channels, allowing two serial directions or four available driver or receiver channels when only unidirectional operation is required. Because it is a full RS-232 implementation rather than an RS-422 or RS-485 interface, designers must account for RS-232 voltage levels, grounding, cable length, transient exposure, and point-to-point communication topology when planning the port. The exact driver and receiver data rates, loopback behavior, input levels, and shutdown characteristics should be confirmed from the MAX232A manufacturer datasheet.

The MAX232AEUE+ uses the MAX232A family's integrated charge-pump approach to develop the bipolar voltage swings required by RS-232 without requiring a separate negative supply. This internal arrangement reduces the external support circuitry relative to a discrete transmitter implementation, although charge-pump capacitors and interface protection still require careful layout. As a 5 V interface IC, it is designed to connect CMOS or TTL-level digital circuitry to an RS-232 port through appropriate signal conditioning and protection.

Typical applications include programming and configuration ports in embedded instruments, industrial control modules, laboratory data loggers, point-of-sale equipment, and serial adapters. Two transmitter and two receiver channels also support mirrored communication links or multiple RS-232 lines when the system architecture permits. For short-distance point-to-point links, the device can form the central electrical interface between a host UART and a remote peripheral, with grounding and surge protection handled at the connector.

PCB placement should minimize trace length between the MAX232AEUE+, its charge-pump capacitors, and the protection network at the RS-232 connector. Keep the interface return path continuous, use a suitable ground reference, and place transient-protection devices close to the connector. Confirm the pinout, capacitor values, and recommended layout directly in the manufacturer datasheet before fabrication because the exact connector and protection topology depend on cable exposure.

This product page combines the exact MAX232AEUE+ ordering information with the verified 16-pin TSSOP package, 4.5 V to 5.5 V operating range, production status, and package-level drop-in comparison. It also organizes procurement, replacement, application, and design guidance so engineers can evaluate the transceiver before committing a board layout.

Mga alternatibo na pwedeng ilagay na MAX232AEUE+ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok MAX232AEUE+ (parehas na form factor at footprint) — pagkakaiba sa Interface Standard, Product Type, Number of Receivers, Package, Number of Drivers.

Analog Devices
Interface Standard: EIA/TIA-232E and V.28/V.24
Product Type: Dual RS-232 transceiver
Number of Receivers: 2
Ikabit sa MAX232AEUE+ →
Analog Devices
Interface Standard: RS-232
Product Type: RS-232 transceiver interface IC
Ikabit sa MAX232AEUE+ →
Analog Devices
Interface Standard: EIA/TIA-232E, V.28, and V.24
Product Type: RS-232 dual transmitter/receiver interface IC
Number of Receivers: 2 channels
Ikabit sa MAX232AEUE+ →
Texas Instruments
Interface Standard: TIA/EIA-232-F and ITU Recommendation V.28
Product Type: Dual RS-232 driver/receiver with capacitive voltage generator
Number of Receivers: 2
Ikabit sa MAX232AEUE+ →

MAX232AEUE+T

✅ Drop-In
Analog Devices
📦 TSSOP-16
RS-232 dual transmitter/receiver interface IC · +5 V · 2 channels · 2 channels · EIA/TIA-232E, V.28, and V.24 · 16-pin TSSOP · 4.40 mm · 0.173 inch

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX232AEUE

✅ Drop-In
📦 TSSOP-16
Same 2/2 RS-232 configuration, +5 V operation, and 16-pin TSSOP package; the exact ordering suffix differs by 0% in the listed electrical ratings

📋 Alternatibo na Reference (hindi sa katalogo)

MAX232AEUE+ Mga Spesipikasyon

Device Type RS-232 transceiver
Number of Drivers 2 drivers
Number of Receivers 2 receivers
Interface Standard Full RS-232
Supply Voltage Range 4.5 V to 5.5 V
Nominal Supply Voltage +5 V
Packhaging 16-pin TSSOP
Total Pin Count 16 pins
Uri ng Pagpapasok Surface mount
Production Status Production
Tindminan RoHS Compliant

Gabay sa Pin Configuration ng MAX232AEUE+ 16-pin tssop

Pin configuration para sa MAX232AEUE+ (16-pin tssop package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 16-pin tssop package para sa MAX232AEUE+

Wala ng detalyadong pinout data na magagamit para sa MAX232AEUE+.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MAX232AEUE+ ay nararapat para sa 6 aplikasyons: Embedded Instrument Configuration Port, Industrial Controller Serial Link, Laboratory Data Logger, Point-of-Sale Terminal Interface, Point-to-Point Communication Bridge, Service and Maintenance Interface.

⚡

Embedded Instrument Configuration Port

The MAX232AEUE+ is appropriate for a compact configuration interface between an embedded controller and a service terminal. Its 2 drivers and 2 receivers provide two bidirectional RS-232 channels, while the 16-pin TSSOP occupies less board area than a larger through-hole interface. The 4.5 V to 5.5 V operating range matches a +5 V control system. Place the transceiver close to the connector, route the UART signals to the host, and add external transient protection because the transceiver itself does not remove the need for a robust cable interface.

🏭

Industrial Controller Serial Link

The MAX232AEUE+ can serve as the RS-232 interface on a compact industrial controller with a 5 V logic supply. Two transmitter channels support separate control and status paths, while two receiver channels accept commands or sensor data. Its 2/2 arrangement covers common full-duplex serial-port architectures without requiring separate line-driver ICs. For factory equipment, route the connector through protection components, maintain a suitable signal-ground relationship, and verify the device temperature grade against the enclosure environment.

🖥️

Laboratory Data Logger

A laboratory data logger can use the MAX232AEUE+ to connect a host computer to a remote measurement or instrument-control port. The dual driver and receiver structure permits a bidirectional command channel plus an additional data path, and the TSSOP-16 package leaves board area for sensing and signal-conditioning circuits. Operating from 4.5 V to 5.5 V simplifies integration with a nominal 5 V system. Keep the RS-232 traces short and controlled, provide a continuous ground return, and use connector-side protection for cables that leave the instrument.

🔧

Point-of-Sale Terminal Interface

The MAX232AEUE+ fits point-of-sale equipment that must communicate with a host, printer, scanner, or service computer through RS-232. Its 2/2 channel arrangement allows a primary host port and a second serial link when the equipment architecture needs one. The +5 V supply range and 16-pin TSSOP footprint support compact controller boards. Confirm the required baud rate, logic levels, and cable distance against the manufacturer data sheet, and place protection components near the external connector rather than allowing cable transients to reach the transceiver.

🌐

Point-to-Point Communication Bridge

The MAX232AEUE+ is useful in a small communication bridge that translates 5 V logic-level UART signals to RS-232 and back. The 2 transmitters and 2 receivers allow a pair of links or a command-and-data arrangement, while the integrated transceiver simplifies the implementation compared with separate line-driver and receiver packages. Its TSSOP-16 construction supports dense bridge hardware. Use a point-to-point cable topology, provide a common ground where appropriate, and validate the maximum data rate and receiver thresholds from the MAX232A manufacturer data sheet.

🔧

Service and Maintenance Interface

The MAX232AEUE+ can provide a dedicated service port on embedded equipment where technicians connect a laptop or maintenance controller. Two receivers allow the service channel to coexist with another inbound status channel, and two drivers support outbound commands and responses. The small TSSOP package is advantageous in sealed or space-constrained products. Design the connector interface with transient suppression, ensure accessible chassis or signal grounding, and consider isolation if the connected equipment can develop large ground-potential differences.

Buod ng mga Inirekomendang Produkto

MAX232 Same RS-232 transceiver family Ginagamit sa: Embedded Instrument Configuration Port, Laboratory Data Logger, Point-to-Point Communication Bridge, Service and Maintenance Interface MAX232A Related +5 V multichannel transceiver family Ginagamit sa: Embedded Instrument Configuration Port, Laboratory Data Logger, Service and Maintenance Interface MAX232ID Texas Instruments Ginagamit sa: Industrial Controller Serial Link, Point-to-Point Communication Bridge TJA1057GTK/3Z NXP Semiconductors Ginagamit sa: Industrial Controller Serial Link MAX232AEUE+T Analog Devices Ginagamit sa: Point-of-Sale Terminal Interface MAX232AEUE Same-family base ordering code Ginagamit sa: Point-of-Sale Terminal Interface
Where to buy MAX232AEUE+ online?
The MAX232AEUE+ can be requested through the “Request a Quote” form on this page. Analog Devices identifies the MAX232A family as a production product, and the exact MAX232AEUE+ ordering code is listed for a 2/2 transceiver in a 16-pin TSSOP package. The form lets you request current availability, package quantity, and lead time for the exact suffix without substituting a different temperature grade or package.
What is the price of MAX232AEUE+?
The current unit price for MAX232AEUE+ should be obtained through the “Request a Quote” form on this page. The component is a production catalog part with a manufacturer product page and an exact 16-pin TSSOP ordering entry, so a current quotation can be matched to the precise MPN and packaging suffix. Requesting the quote directly avoids confusion with the broader MAX232A family or other package variants.
What is the lead time for MAX232AEUE+?
Submit the MAX232AEUE+ MPN through the “Request a Quote” form on this page to obtain the current lead time and minimum order quantity. Analog Devices lists the MAX232A family as a production part, but manufacturing availability can vary by package, quantity, and distribution channel. The quotation response should state the exact MAX232AEUE+ order code, package, quantity schedule, and expected delivery timing.
Is MAX232AEUE+ in stock?
Current MAX232AEUE+ inventory should be confirmed through the “Request a Quote” form on this page. The manufacturer identifies the MAX232A family as a production product, and the exact MAX232AEUE+ is a 16-pin TSSOP device, but a production-family status does not by itself establish local stock. Request the quantity and delivery schedule needed for your build against the exact MPN.
What are the key specifications of MAX232AEUE+ that engineers should know?
The MAX232AEUE+ is a +5 V-powered RS-232 transceiver with 2 drivers, 2 receivers, a 4.5 V to 5.5 V operating range, and a 16-pin TSSOP package. According to the Analog Devices MAX232A product page, the device is in production. These core parameters define it as a dual-channel bidirectional RS-232 interface rather than an RS-422, RS-485, or modern differential transceiver.
What is the operating voltage of MAX232AEUE+?
The MAX232AEUE+ operates from 4.5 V to 5.5 V and is designed for nominal +5 V operation. According to the MAX232A manufacturer datasheet, the device integrates both RS-232 line drivers and receivers while generating the required bipolar signal levels internally. Its digital-side supply arrangement allows it to interface with a 5 V system without a separate negative rail at the transceiver.
Where to download the MAX232AEUE+ datasheet PDF?
The MAX232AEUE+ datasheet and supporting documentation are available from the Analog Devices MAX232A product page at analog.com. The page identifies MAX232A as a production +5 V-powered, multichannel RS-232 driver and receiver family. Use the manufacturer data sheet for the definitive pin description, electrical characteristics, ordering information, recommended charge-pump capacitors, and package drawing before laying out a PCB.
Where to find the MAX232AEUE+ pinout?
The MAX232AEUE+ pinout is documented in the Analog Devices MAX232A manufacturer data sheet and its package drawing. The exact ordering code is a 16-pin TSSOP device. Use the pin-description table and land-pattern drawing rather than assigning signals from a generic RS-232 schematic, because charge-pump capacitor connections, receiver outputs, driver inputs, and supply pins must match the manufacturer’s specified pin numbering.
What can replace MAX232AEUE+?
The closest documented replacement is MAX232AEUE+T because the cross-reference listing describes it as a complete replacement with consistent terminals, package, and principal performance characteristics. It is a distinct ordering suffix, so its availability and packing configuration should be confirmed before substitution. The MAX232AEUE+ should also be compared with the base MAX232AEUE ordering code when an exact Pb-free designation is not mandatory.
Is MAX232AEUE+ the same as MAX232?
MAX232AEUE+ belongs to the same MAX232/MAX232A RS-232 transceiver family, but the exact ordering codes still need to be matched for package, qualification, and purchasing requirements. A comparison source identifies MAX232 and MAX232AEUE+ as functionally equivalent for most designs, while the Analog Devices family page confirms the shared +5 V multichannel architecture. Verify the selected suffix’s package and ordering information before release.
When should I choose MAX232AEUE+ over MAX232AEUE+T?
Choose MAX232AEUE+ when the exact Pb-free 16-pin TSSOP ordering code is required by your approved BOM or qualification record. Choose MAX232AEUE+T only after confirming that its packing configuration, availability, and commercial terms meet the assembly requirements. Cross-reference information describes the two as package- and terminal-compatible, but procurement attributes and assembly packaging still require final review.
Is MAX232AEUE+ suitable for an industrial RS-232 port?
The MAX232AEUE+ is suitable for a +5 V RS-232 interface when its specified operating-temperature range and transient requirements meet the product’s environmental needs. The device provides 2 transmitters and 2 receivers in a compact 16-pin TSSOP, which is useful for industrial controllers and data loggers. Add connector-side surge protection and confirm grounding and temperature limits in the manufacturer data sheet.
MAX232AEUE+ vs MAX232ID - which is better for a compact design?
The MAX232AEUE+ offers a 16-pin TSSOP package, while the exact package for MAX232ID must be checked against its ordering code before a footprint decision is made. For a PCB already designed around the MAX232AEUE+ TSSOP land pattern, retaining that package avoids mechanical changes. A comparison source reports no meaningful primary performance difference, so package qualification and availability should drive the final choice.
Can MAX232AEUE+ replace MAX232A?
The MAX232AEUE+ is a MAX232A-family ordering option intended to provide the same fundamental +5 V multichannel RS-232 function. When replacing a MAX232A selection, confirm that the original part used the same 16-pin TSSOP footprint and that the required electrical limits, temperature grade, and ordering suffix remain acceptable. The family relationship supports interchangeability, but the exact package code still governs PCB compatibility.
What is the best STMicroelectronics equivalent for MAX232AEUE+?
No STMicroelectronics cross-brand equivalent can be confirmed as a pin-to-pin drop-in replacement for the MAX232AEUE+ from the documented cross-reference results. The available cross-reference information identifies possible analogues and compatible equivalents, but it does not establish an STMicroelectronics part in the exact 16-pin TSSOP footprint with quantified parameter equivalence. Keep the MAX232AEUE+ footprint unless a candidate is separately validated against the MAX232A data sheet.

Impormasyon ng Talumpati sa Engineering for MAX232AEUE+ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Select the MAX232AEUE+ when the design requires a +5 V, full RS-232 interface with two transmit channels, two receive channels, and a 16-pin TSSOP footprint. The base MAX232AEUE may be considered when the plus-qualified ordering configuration is not required, while MAX232AEUE+T may fit an approved BOM entry using that packing or ordering suffix. All three catalogued choices share the same core electrical role, so the final selection should emphasize exact ordering requirements, assembly packaging, lifecycle status, and current availability. Do not substitute MAX232ID or another RS-232 device solely from a generic equivalence listing: first confirm that its package, temperature grade, electrical limits, and pin assignments match the PCB. For new designs that need differential noise immunity, longer cable reach, or multi-drop networking, an RS-485 interface may be more appropriate than any RS-232 replacement.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MAX232AEUE+T MAX232AEUE
Package TSSOP-16 TSSOP-16 TSSOP-16
Brand Analog Devices Analog Devices Analog Devices
Transmitter Channels 2 drivers 2 drivers 2 drivers
Receiver Channels 2 receivers 2 receivers 2 receivers
Interface Standard Full RS-232 Full RS-232 Full RS-232
Supply Voltage Range 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V
Nominal Supply +5 V +5 V +5 V
Total Pin Count 16 pins 16 pins 16 pins
Production Status Production Production family listing Production family listing

Pangunahing mga Pagkakaiba

  • Combines two drivers and two receivers in one compact interface (kumpara saMAX232AEUE+T)
  • Exact MAX232AEUE+ ordering identity (kumpara saMAX232AEUE)
  • Surface-mount TSSOP implementation (kumpara saMAX232ID)

Talaan ng Disenyo

Place the MAX232AEUE+ and its charge-pump capacitors close to the transceiver pins, following the manufacturer’s recommended component-placement diagram. Keep the charge-pump loop compact to limit switching noise and maintain predictable operation. Route UART-side traces away from RS-232 connector and protection components, and provide a solid ground plane beneath the interface area where the board stack-up permits it.

Do not treat the MAX232AEUE+ as a surge-protection device. A cable-connected RS-232 port can expose the transceiver to transients and ground-potential differences, so place suitable protection at the connector and verify its voltage and capacitance ratings. Also verify the exact pin names and capacitor connections in the MAX232A manufacturer data sheet; connector-side protection and on-chip charge-pump circuitry serve different purposes.

Keep the RS-232 traces physically separated from clocks, switching-power nodes, and sensitive analog inputs to reduce crosstalk. Maintain a reliable signal-ground return between connected equipment, and use a ground strategy appropriate to the installation when large ground offsets are possible. Confirm the supported data rate and cable length in the manufacturer documentation before treating the interface as a long-distance or high-rate link.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The exact MAX232AEUE+ listing identifies the TSSOP-16 device as RoHS compliant. No manufacturer statement for REACH, AEC-Q100, halogen-free status, or conflict-minerals compliance was established.

Data napatotohanan sa: 2026-11-13 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MAX232AEUE+ MAX232AEUE+ datasheet MAX232AEUE+ datasheet pdf MAX232AEUE+ pinout MAX232AEUE+ schematic MAX232AEUE+ equivalent MAX232AEUE+ replacement MAX232AEUE+ cross reference MAX232AEUE+ footprint MAX232AEUE+ price MAX232AEUE+ stock Analog Devices MAX232AEUE+ MAX232AEUE+ TSSOP-16 MAX232AEUE+ RS-232 interface

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices MAX232AEUE+ MAX232AEUE+T MAX232AEUE MAX232A MAX232 MAX232ID RS-232 RS-232 transceiver line driver line receiver interface IC charge-pump voltage converter UART unbalanced serial communication TSSOP-16 TSSOP package family surface-mount package 5 V power supply 4.5 V to 5.5 V operating range 2 drivers 2 receivers RoHS industrial control
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ