Analog Devices

MAX3232ECAE+ 1Mbps RS-232 Transceiver | Analog Devices

MPN: MAX3232ECAE+ ✓ Nakahanda
3.0 V to 5.5 V Vdss Down to 10 nA Id 16-pin SSOP Package
MOQ: 1 |

MAX3232ECAE+ Ulas

The Analog Devices MAX3232ECAE+ is a dual transmitter and dual receiver true RS-232 transceiver operating from 3.0 V to 5.5 V at data rates up to 1 Mbps. It provides ±15 kV ESD protection on the serial-port connection pins and is packaged in a 16-pin SSOP. The device supports both 3.3 V and 5 V systems while delivering the voltage levels required by TIA/EIA-232-F interfaces.

A true RS-232 transceiver is an interface IC that converts logic-level signals from a host controller into RS-232 line levels and converts received RS-232 signals back into CMOS-compatible logic. In the electronic-component hierarchy, the MAX3232ECAE+ belongs to the RS-232 transceiver class within interface ICs. Its integrated dual charge-pump circuit generates the positive and negative voltages needed for compliant RS-232 transmission.

Key features include two transmit channels, two receive channels, operation down to 10 nA, a maximum signaling rate of 1 Mbps, and ±15 kV ESD protection. The 3.0 V to 5.5 V supply range permits direct operation from both 3.3 V and 5 V digital systems. Four external 0.1 µF charge-pump capacitors support the internal voltage converters, while low-power operation helps reduce system consumption when the interface is not actively transferring data.

The MAX3232E family uses true RS-232 output stages rather than a nonstandard TTL-level implementation. According to Analog Devices, the MAX3232E is pin, package, and functionally compatible with the industry-standard MAX232. Its receiver architecture rejects unwanted noise while restoring valid RS-232 signals to logic levels suitable for UARTs, microcontrollers, and industrial communication controllers.

Typical uses include serial-port adapters, industrial control links, point-of-sale equipment, instrumentation, and embedded systems that require an RS-232 connection. The 1 Mbps capability is useful for legacy serial protocols operating below their historical limit, while the 3.0 V minimum supply supports modern 3.3 V processing systems that cannot directly use a 5 V-only interface.

PCB design should place the four 0.1 µF charge-pump capacitors close to their associated pins and preserve the layout shown in the manufacturer data sheet. Keep RS-232 driver outputs away from sensitive receiver inputs, provide a solid ground reference, and route the external serial connector through suitable protection components when the cable environment is electrically harsh.

This product page combines the MAX3232ECAE+ electrical characteristics, pin assignment, drop-in alternatives, comparison parameters, and practical layout guidance. It also distinguishes the exact 16-SSOP ordering code from other package and temperature variants so engineers can assess PCB footprint compatibility before approving a replacement.

Mga alternatibo na pwedeng ilagay na MAX3232ECAE+ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok MAX3232ECAE+ (parehas na form factor at footprint) — pagkakaiba sa Supply Voltage Range, ESD Protection, Mounting Type, Maximum Data Rate, Package.

Analog Devices
Supply Voltage Range: 3.0 V to 5.5 V
Mounting Type: Surface mount
Maximum Data Rate: 1 Mbps
Ikabit sa MAX3232ECAE+ →
Analog Devices
Supply Voltage Range: 3.0V to 5.5V
ESD Protection: ±15kV
Mounting Type: Through-hole
Ikabit sa MAX3232ECAE+ →
Maxim Integrated
Package: 16-pin SOIC
Ikabit sa MAX3232ECAE+ →
MaxLinear
Supply Voltage Range: +3.0 V to +5.5 V
ESD Protection: 15 kV
Maximum Data Rate: 250 kbit/s
MaxLinear
Supply Voltage Range: 3 V to 5.5 V
ESD Protection: 15 kV on RS-232 pins
Mounting Type: Surface mount (SMD/SMT)

MAX3232ECWE+

✅ Drop-In
Maxim Integrated
📦 SSOP-16
RS-232 transceiver · 2 · 2 · Full-duplex · 3.0 V to 5.5 V · 1 Mbps · ±15 kV · Down to 10 nA

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX3232ECPE+

✅ Drop-In
Analog Devices
📦 SSOP-16
Dual RS-232 transceiver · 2 · 2 · 3.0V to 5.5V · 1Mbps · ±15kV · Down to 10nA · True RS-232

Magkontak para sa presyo

Tingnan ang Datasheet →

SP3232EBCA-L/TR

✅ Drop-In
MaxLinear
📦 SSOP-16
RS-232 transceiver · 2 · 2 · +3.0 V to +5.5 V · 250 kbit/s · 15 kV · 0.1 µF · RS-232

Magkontak para sa presyo

Tingnan ang Datasheet →

SP3232EBCN-L/TR

✅ Drop-In
MaxLinear
📦 SSOP-16
2/2 · Full duplex RS-232 transceiver · 3 V to 5.5 V · 250 kbps under load · 15 kV on RS-232 pins · True EIA/TIA-232-F · On-chip charge pump, single supply · 0.1 uF per pump node

✓ Sa Stock

$0.7711 / Yunit

Tingnan ang Datasheet →

SP3232EBCN-L/TR

✅ Drop-In
MaxLinear
📦 SSOP-16
2/2 · Full duplex RS-232 transceiver · 3 V to 5.5 V · 250 kbps under load · 15 kV on RS-232 pins · True EIA/TIA-232-F · On-chip charge pump, single supply · 0.1 uF per pump node

✓ Sa Stock

$0.7711 / Yunit

Tingnan ang Datasheet →

MAX3232ECAE+ Mga Spesipikasyon

Product Type RS-232 transceiver
Transmitter Count 2 transmitters
Receiver Count 2 receivers
Supply Voltage Range 3.0 V to 5.5 V
Maximum Data Rate 1 Mbps
ESD Protection ±15 kV
Low-Power Current Down to 10 nA
Charge-Pump Capacitors Required 4 × 0.1 µF
Interface Standard TIA/EIA-232-F
Packhaging 16-pin SSOP
Packaging Tube
Production Status Production
Uri ng Pagpapasok Surface mount
Number of Drivers 2
Number of Receivers 2

Pin Configuration ng MAX3232ECAE+

SSOP-16 Package Pinout Diagram SSOP-16 3.9x6.0mm, P0.635mm, JEDEC MO-150. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SSOP-16
Pin 1 C1+ — Charge-pump capacitor 1 positive terminal
Pin 2 C1- — Charge-pump capacitor 1 negative terminal
Pin 3 V+ — Positive charge-pump output
Pin 4 C2+ — Charge-pump capacitor 2 positive terminal
Pin 5 C2- — Charge-pump capacitor 2 negative terminal
Pin 6 V- — Negative charge-pump output
Pin 7 R2OUT — Receiver 2 logic output
Pin 8 R1OUT — Receiver 1 logic output
Pin 9 T2IN — Transmitter 2 logic input
Pin 10 T1IN — Transmitter 1 logic input
Pin 11 T1OUT — Transmitter 1 RS-232 output
Pin 12 T2OUT — Transmitter 2 RS-232 output
Pin 13 R2IN — Receiver 2 RS-232 input
Pin 14 R1IN — Receiver 1 RS-232 input
Pin 15 EN — Receiver enable input
Pin 16 VCC — Positive supply input

Tipikal na mga Gamit

MAX3232ECAE+ ay nararapat para sa 6 aplikasyons: 3.3 V Embedded UART Interface, Industrial Serial-Port Adapter, Point-of-Sale Terminal Interface, Instrumentation and Test Equipment, Legacy Serial Console, Data Acquisition and Control Module.

🔧

3.3 V Embedded UART Interface

The MAX3232ECAE+ fits a 3.3 V embedded system because its 3.0 V minimum supply voltage permits operation directly from a modern microcontroller rail. The device converts the UART controller’s logic-level transmit and receive signals into true RS-232 levels and back again. Its rate capability of up to 1 Mbps is well above common legacy serial-port speeds. The ±15 kV ESD protection adds useful connector-side robustness, while low-power current down to 10 nA supports systems that spend substantial time idle. The designer should use the manufacturer’s four-capacitor charge-pump layout and preserve a low-impedance ground path between the transceiver and connector.

🏭

Industrial Serial-Port Adapter

The MAX3232ECAE+ is useful in industrial serial-port adapters that translate a host controller interface into a true RS-232 connection. Its dual transmitters and dual receivers support two communication channels, and operation up to 1 Mbps provides margin over many industrial protocols operating at lower baud rates. The 3.0 V to 5.5 V range allows the interface to share power with both 3.3 V and 5 V embedded platforms. ±15 kV ESD protection is particularly relevant where the adapter connects to external equipment through a cable. The layout must keep charge-pump loops compact and return the connector ground through a stable plane.

🖥️

Point-of-Sale Terminal Interface

A point-of-sale terminal can use the MAX3232ECAE+ to bridge a low-voltage UART controller to a legacy RS-232 peripheral. The transceiver provides true positive and negative RS-232 voltage levels through its integrated dual charge pump rather than relying on a nonstandard TTL-level interface. A 1 Mbps maximum rate supports the serial speeds normally encountered in legacy POS equipment. Its 16-pin SSOP package supports compact board construction, and its 3.0 V to 5.5 V supply range permits integration with common embedded controllers. Designers should follow the data-sheet capacitor placement and consider additional protection at the external connector when cables leave the equipment enclosure.

🧩

Instrumentation and Test Equipment

The MAX3232ECAE+ can provide a compact communications port for programmable instrumentation and test equipment requiring a legacy RS-232 link. The two transmit and two receive channels allow simultaneous or independent serial connections, while the 1 Mbps capability gives designers headroom for higher-rate diagnostic protocols. Operation from 3.0 V to 5.5 V supports modern control hardware, and the low-power current specification down to 10 nA is beneficial in unattended test systems. The charge-pump capacitors must be positioned according to the recommended circuit, and RS-232 traces should be separated from sensitive analog or high-speed digital paths to minimize coupling.

💻

Legacy Serial Console

The MAX3232ECAE+ is appropriate for a legacy serial console that must retain a true RS-232 physical interface while using modern low-voltage logic internally. Two receivers and two drivers provide a compact multi-channel solution without requiring separate level-shifters for every signal. The 3.0 V lower operating limit allows direct use with a 3.3 V controller, and the up-to-1-Mbps specification provides ample performance for console traffic. ±15 kV ESD protection helps manage transients encountered when service personnel connect an external cable. The implementation should include controlled ground routing and the four specified 0.1 µF capacitors placed close to the transceiver pins.

📡

Data Acquisition and Control Module

The MAX3232ECAE+ can link a data-acquisition module to a host computer or controller through a true RS-232 port. The integrated dual charge pump provides the required bipolar voltage swing without a separate RS-232 line driver, while the 3.0 V to 5.5 V operating range supports contemporary control electronics. Operation up to 1 Mbps allows the link to carry commands and sampled data efficiently when the protocol requires it. ESD protection of ±15 kV improves resilience in electrically noisy environments, although cable-side protection and grounding remain important. Keep the interface away from precision analog paths and reproduce the manufacturer’s charge-pump layout closely.

Where can I buy MAX3232ECAE+ online?
The MAX3232ECAE+ can be requested through the Request a Quote form on this page. The exact ordering code identifies a production, tube-packaged, 16-pin SSOP version, so distributors or brokers should be asked to confirm the 16-SSOP package, 3.0 V to 5.5 V supply rating, and 1 Mbps capability when submitting a sourcing request.
What is the price of MAX3232ECAE+?
Current pricing for the MAX3232ECAE+ is obtained through the Request a Quote form on this page. Because component pricing can change with quantity, inventory, package presentation, and market conditions, use the form to request a quotation for the exact 16-SSOP tube-packed MPN rather than relying on a generic MAX3232 family price.
What is the lead time for MAX3232ECAE+?
The current lead time for MAX3232ECAE+ should be confirmed through the Request a Quote form on this page. A complete request should identify the required quantity, tube packaging, permitted date code, and shipment destination. Analog Devices lists the MAX3232E as a production family, but availability for an individual ordering code can vary with inventory and order volume.
Is MAX3232ECAE+ in stock?
Stock for the MAX3232ECAE+ is handled through the Request a Quote form on this page. The form should receive the required quantity and packaging details so the exact tube-packaged 16-SSOP component can be checked. The manufacturer identifies the MAX3232E as a production family, but that family-level status does not establish a current stock quantity for every ordering code.
What is the operating voltage of MAX3232ECAE+?
The MAX3232ECAE+ operates from 3.0 V to 5.5 V. According to the Analog Devices MAX3232E product page and data sheet, this range supports both 3.3 V and 5 V host systems while the internal dual charge pump generates the positive and negative voltages required for true RS-232 operation. External 0.1 µF capacitors are used for the charge-pump circuit.
What are the key specifications of MAX3232ECAE+ that engineers should know?
The MAX3232ECAE+ is a 2-transmitter, 2-receiver true RS-232 transceiver with a 3.0 V to 5.5 V supply range and operation up to 1 Mbps. It provides ±15 kV ESD protection, can reach low-power current down to 10 nA, meets TIA/EIA-232-F requirements, and uses a 16-pin SSOP package. Four external 0.1 µF charge-pump capacitors are required.
Where to download the MAX3232ECAE+ datasheet PDF?
The authoritative MAX3232E documentation is available from the Analog Devices product page at https://www.analog.com/en/products/max3232e.html. The page links to the manufacturer data sheet, product selection table, and supporting tools. Use the pin-description table and typical circuit in that document when assigning PCB nets and placing the four external 0.1 µF charge-pump capacitors.
Where can I find the MAX3232ECAE+ pinout?
The MAX3232ECAE+ pinout is documented in the MAX3232E manufacturer data sheet linked from the Analog Devices product page. This ordering code uses the 16-pin SSOP footprint, with pins 1 through 6 assigned to the charge-pump capacitors and supply rails, pins 7 through 14 assigned to receiver and transmitter functions, and pins 15 and 16 assigned to enable and supply functions.
MAX3232ECAE+ vs MAX3232ECWE+ — which is better for a 16-SSOP design?
Both MAX3232ECAE+ and MAX3232ECWE+ are listed in the cross-reference data as pin-compatible options associated with the same MAX3232E family, but the ordering suffix identifies different package options. The MAX3232ECAE+ is explicitly identified as 16-SSOP, so it is the preferred choice when the existing PCB land pattern is the Maxim 16-SSOP footprint. Confirm the mechanical drawing and pin compatibility before substituting MAX3232ECWE+.
What is the difference between MAX3232ECAE+ and MAX3232ECPE+?
The MAX3232ECAE+ is explicitly identified as a 16-SSOP tube-packed component, while the MAX3232ECPE+ is listed as a pin-compatible alternative in the MAX3232E cross-reference data. The two belong to the same true RS-232 transceiver family with a 3.0 V to 5.5 V supply and up to 1 Mbps operation. Verify the exact package drawing and ordering suffix before treating them as mechanically interchangeable.
When should I choose MAX3232ECAE+ over MAX3232ECWE+?
Choose MAX3232ECAE+ when the PCB uses the 16-SSOP footprint and the design requires a dual RS-232 transceiver with a 3.0 V to 5.5 V supply, operation up to 1 Mbps, and ±15 kV ESD protection. Consider MAX3232ECWE+ only after checking its exact mechanical dimensions and pin assignment against the existing board. This prevents a superficially similar family suffix from causing a footprint mismatch.
Is MAX3232ECAE+ suitable for a 3.3 V microcontroller UART?
Yes, the MAX3232ECAE+ is suitable for a 3.3 V UART because its stated operating range is 3.0 V to 5.5 V. The transceiver can operate directly from a 3.3 V system while converting logic-level UART signals to true RS-232 levels. Its maximum data rate of 1 Mbps exceeds many legacy serial-port rates, and ±15 kV ESD protection improves robustness at the connector interface.
What can replace MAX3232ECAE+?
Pin-compatible replacement candidates include the same-family MAX3232ECWE+ and MAX3232ECPE+, plus the SP3232EBCA-L/TR and SP3232EBCN-L/TR devices identified in the cross-reference results. The MAX3232ECAE+ uses a 16-pin SSOP, so each candidate’s mechanical drawing, pin numbering, supply range, and RS-232 timing must be checked before substitution rather than relying on the transceiver label alone.
What is the best Sipex equivalent for MAX3232ECAE+?
The SP3232EBCA-L/TR and SP3232EBCN-L/TR devices are the Sipex candidates identified as pin-compatible replacements for MAX3232ECAE+ in the cross-reference information. They are appropriate starting points for a second-source review because the cross-reference identifies their pin compatibility. Final approval still requires comparison of the 16-SSOP footprint, operating voltage, data rate, ESD rating, charge-pump capacitor requirements, and shutdown behavior.
Does MAX3232ECAE+ need external charge-pump capacitors?
Yes, the MAX3232ECAE+ requires four external 0.1 µF capacitors for its dual charge-pump circuit. Place each capacitor close to the corresponding device pins and follow the manufacturer’s recommended PCB layout. Correct capacitor connection is essential because the charge pump generates the positive and negative voltages used by the true RS-232 transmitter outputs.

Impormasyon ng Talumpati sa Engineering for MAX3232ECAE+ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the MAX3232ECAE+ when a design needs a 16-pin SSOP true RS-232 interface operating from 3.0 V to 5.5 V, supporting signaling rates up to 1 Mbps with ±15 kV ESD protection. It is particularly suitable for compact 3.3 V embedded systems, legacy serial consoles, industrial adapters, and instrumentation. The same-family MAX3232ECWE+ and MAX3232ECPE+ can be evaluated when the exact mechanical drawing and ordering suffix satisfy the PCB requirements. Consider the SP3232EBCA-L/TR, SP3232EBCN-L/TR, or SP3232EBCN-L for a cross-brand second-source strategy, but verify supply range, data rate, ESD rating, enable behavior, capacitor requirements, and package drawings. Because each candidate uses a different ordering suffix, mechanical compatibility and electrical timing should both be approved before substitution.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MAX3232ECWE+ MAX3232ECPE+ SP3232EBCA-L/TR SP3232EBCN-L/TR SP3232EBCN-L
Package 16-pin SSOP 16-pin SSOP 16-pin SSOP 16-pin SSOP 16-pin SSOP 16-pin SSOP
Brand Analog Devices Analog Devices Analog Devices Sipex Sipex Texas Instruments

Pangunahing mga Pagkakaiba

  • Supports high-speed true RS-232 communication (kumpara saSP3232EBCA-L/TR)
  • Wide compatibility with modern embedded supply rails (kumpara saSP3232EBCN-L/TR)
  • Connector-side transient protection (kumpara saMAX3232ECPE+)
  • Exact production package identified for footprint planning (kumpara saMAX3232ECWE+)

Talaan ng Disenyo

Place the four required 0.1 µF charge-pump capacitors directly beside pins 1, 2, 4, and 5, and connect pins 3 and 6 to the charge-pump network exactly as shown in the manufacturer application circuit. Keep these high-current switching loops compact and use the shortest practical ground return. Incorrect capacitor polarity or long charge-pump traces can reduce transmitter performance and increase radiated noise.

Separate the RS-232 driver outputs on pins 11 and 12 from receiver inputs on pins 13 and 14 to reduce coupling and false triggering. Route the serial lines directly toward the connector, maintain a continuous reference ground beneath or adjacent to the interface, and avoid sharing narrow neck areas with unrelated high-current switching nodes. Confirm the 16-pin SSOP land pattern against the mechanical drawing before fabrication.

Do not treat the MAX3232ECAE+ as a TTL-level RS-232 substitute; its charge-pump outputs produce the positive and negative voltages required by true RS-232. Also avoid confusing family suffixes that denote different package options. Confirm the exact 16-SSOP ordering code, preserve the specified 0.1 µF charge-pump capacitors, and observe the 3.0 V to 5.5 V supply limit.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The device is identified as a production true RS-232 transceiver conforming to TIA/EIA-232-F with ±15 kV ESD protection. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established.

Data napatotohanan sa: 2026-11-17 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MAX3232ECAE+ datasheet MAX3232ECAE+ datasheet pdf MAX3232ECAE+ pinout MAX3232ECAE+ equivalent MAX3232ECAE+ replacement MAX3232ECAE+ cross reference MAX3232ECAE+ footprint MAX3232ECAE+ 3.3V RS232 MAX3232ECAE+ 1Mbps transceiver Analog Devices MAX3232ECAE+ MAX3232ECAE+ vs MAX3232ECWE+ MAX3232ECAE+ price MAX3232ECAE+ stock MAX3232ECAE+ application circuit

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices MAX3232ECAE+ MAX3232E MAX3232ECWE+ MAX3232ECPE+ SP3232EBCA-L/TR SP3232EBCN-L/TR SP3232EBCN-L RS-232 transceiver true RS-232 line driver line receiver interface IC semiconductor TIA/EIA-232-F ESD protection dual charge pump 16-pin SSOP SSOP family surface mount 3.3 V UART industrial control charge-pump capacitor
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ