MAX3232ECAE+ 1Mbps RS-232 Transceiver | Analog Devices
MPN: MAX3232ECAE+ ✓ 啟用中MAX3232ECAE+ 概覽
A true RS-232 transceiver is an interface IC that converts logic-level signals from a host controller into RS-232 line levels and converts received RS-232 signals back into CMOS-compatible logic. In the electronic-component hierarchy, the MAX3232ECAE+ belongs to the RS-232 transceiver class within interface ICs. Its integrated dual charge-pump circuit generates the positive and negative voltages needed for compliant RS-232 transmission.
Key features include two transmit channels, two receive channels, operation down to 10 nA, a maximum signaling rate of 1 Mbps, and ±15 kV ESD protection. The 3.0 V to 5.5 V supply range permits direct operation from both 3.3 V and 5 V digital systems. Four external 0.1 µF charge-pump capacitors support the internal voltage converters, while low-power operation helps reduce system consumption when the interface is not actively transferring data.
The MAX3232E family uses true RS-232 output stages rather than a nonstandard TTL-level implementation. According to Analog Devices, the MAX3232E is pin, package, and functionally compatible with the industry-standard MAX232. Its receiver architecture rejects unwanted noise while restoring valid RS-232 signals to logic levels suitable for UARTs, microcontrollers, and industrial communication controllers.
Typical uses include serial-port adapters, industrial control links, point-of-sale equipment, instrumentation, and embedded systems that require an RS-232 connection. The 1 Mbps capability is useful for legacy serial protocols operating below their historical limit, while the 3.0 V minimum supply supports modern 3.3 V processing systems that cannot directly use a 5 V-only interface.
PCB design should place the four 0.1 µF charge-pump capacitors close to their associated pins and preserve the layout shown in the manufacturer data sheet. Keep RS-232 driver outputs away from sensitive receiver inputs, provide a solid ground reference, and route the external serial connector through suitable protection components when the cable environment is electrically harsh.
This product page combines the MAX3232ECAE+ electrical characteristics, pin assignment, drop-in alternatives, comparison parameters, and practical layout guidance. It also distinguishes the exact 16-SSOP ordering code from other package and temperature variants so engineers can assess PCB footprint compatibility before approving a replacement.
直接替換替代品,適用於 MAX3232ECAE+ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MAX3232ECAE+ (相同外形與佔位) — 差異在於 Supply Voltage Range, ESD Protection, Mounting Type, Maximum Data Rate, Package.
MAX3232ECWE+
✅ 直接替換聯絡詢價
查看資料表 →MAX3232ECPE+
✅ 直接替換聯絡詢價
查看資料表 →SP3232EBCA-L/TR
✅ 直接替換聯絡詢價
查看資料表 →SP3232EBCN-L/TR
✅ 直接替換✓ 有庫存
$0.7711 / 單位
查看資料表 →SP3232EBCN-L/TR
✅ 直接替換✓ 有庫存
$0.7711 / 單位
查看資料表 →MAX3232ECAE+ 規格
| Product Type | RS-232 transceiver |
| Transmitter Count | 2 transmitters |
| Receiver Count | 2 receivers |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Maximum Data Rate | 1 Mbps |
| ESD Protection | ±15 kV |
| Low-Power Current | Down to 10 nA |
| Charge-Pump Capacitors Required | 4 × 0.1 µF |
| Interface Standard | TIA/EIA-232-F |
| 封裝 | 16-pin SSOP |
| Packaging | Tube |
| Production Status | Production |
| 安裝類型 | Surface mount |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
MAX3232ECAE+ 腳位配置
| 腳位 1 | C1+ — Charge-pump capacitor 1 positive terminal |
| 腳位 2 | C1- — Charge-pump capacitor 1 negative terminal |
| 腳位 3 | V+ — Positive charge-pump output |
| 腳位 4 | C2+ — Charge-pump capacitor 2 positive terminal |
| 腳位 5 | C2- — Charge-pump capacitor 2 negative terminal |
| 腳位 6 | V- — Negative charge-pump output |
| 腳位 7 | R2OUT — Receiver 2 logic output |
| 腳位 8 | R1OUT — Receiver 1 logic output |
| 腳位 9 | T2IN — Transmitter 2 logic input |
| 腳位 10 | T1IN — Transmitter 1 logic input |
| 腳位 11 | T1OUT — Transmitter 1 RS-232 output |
| 腳位 12 | T2OUT — Transmitter 2 RS-232 output |
| 腳位 13 | R2IN — Receiver 2 RS-232 input |
| 腳位 14 | R1IN — Receiver 1 RS-232 input |
| 腳位 15 | EN — Receiver enable input |
| 腳位 16 | VCC — Positive supply input |
典型應用
MAX3232ECAE+ 適用於 6 應用s: 3.3 V Embedded UART Interface, Industrial Serial-Port Adapter, Point-of-Sale Terminal Interface, Instrumentation and Test Equipment, Legacy Serial Console, Data Acquisition and Control Module.
3.3 V Embedded UART Interface
The MAX3232ECAE+ fits a 3.3 V embedded system because its 3.0 V minimum supply voltage permits operation directly from a modern microcontroller rail. The device converts the UART controller’s logic-level transmit and receive signals into true RS-232 levels and back again. Its rate capability of up to 1 Mbps is well above common legacy serial-port speeds. The ±15 kV ESD protection adds useful connector-side robustness, while low-power current down to 10 nA supports systems that spend substantial time idle. The designer should use the manufacturer’s four-capacitor charge-pump layout and preserve a low-impedance ground path between the transceiver and connector.
推薦
Industrial Serial-Port Adapter
The MAX3232ECAE+ is useful in industrial serial-port adapters that translate a host controller interface into a true RS-232 connection. Its dual transmitters and dual receivers support two communication channels, and operation up to 1 Mbps provides margin over many industrial protocols operating at lower baud rates. The 3.0 V to 5.5 V range allows the interface to share power with both 3.3 V and 5 V embedded platforms. ±15 kV ESD protection is particularly relevant where the adapter connects to external equipment through a cable. The layout must keep charge-pump loops compact and return the connector ground through a stable plane.
推薦
Point-of-Sale Terminal Interface
A point-of-sale terminal can use the MAX3232ECAE+ to bridge a low-voltage UART controller to a legacy RS-232 peripheral. The transceiver provides true positive and negative RS-232 voltage levels through its integrated dual charge pump rather than relying on a nonstandard TTL-level interface. A 1 Mbps maximum rate supports the serial speeds normally encountered in legacy POS equipment. Its 16-pin SSOP package supports compact board construction, and its 3.0 V to 5.5 V supply range permits integration with common embedded controllers. Designers should follow the data-sheet capacitor placement and consider additional protection at the external connector when cables leave the equipment enclosure.
推薦
Instrumentation and Test Equipment
The MAX3232ECAE+ can provide a compact communications port for programmable instrumentation and test equipment requiring a legacy RS-232 link. The two transmit and two receive channels allow simultaneous or independent serial connections, while the 1 Mbps capability gives designers headroom for higher-rate diagnostic protocols. Operation from 3.0 V to 5.5 V supports modern control hardware, and the low-power current specification down to 10 nA is beneficial in unattended test systems. The charge-pump capacitors must be positioned according to the recommended circuit, and RS-232 traces should be separated from sensitive analog or high-speed digital paths to minimize coupling.
推薦
Legacy Serial Console
The MAX3232ECAE+ is appropriate for a legacy serial console that must retain a true RS-232 physical interface while using modern low-voltage logic internally. Two receivers and two drivers provide a compact multi-channel solution without requiring separate level-shifters for every signal. The 3.0 V lower operating limit allows direct use with a 3.3 V controller, and the up-to-1-Mbps specification provides ample performance for console traffic. ±15 kV ESD protection helps manage transients encountered when service personnel connect an external cable. The implementation should include controlled ground routing and the four specified 0.1 µF capacitors placed close to the transceiver pins.
推薦
Data Acquisition and Control Module
The MAX3232ECAE+ can link a data-acquisition module to a host computer or controller through a true RS-232 port. The integrated dual charge pump provides the required bipolar voltage swing without a separate RS-232 line driver, while the 3.0 V to 5.5 V operating range supports contemporary control electronics. Operation up to 1 Mbps allows the link to carry commands and sampled data efficiently when the protocol requires it. ESD protection of ±15 kV improves resilience in electrically noisy environments, although cable-side protection and grounding remain important. Keep the interface away from precision analog paths and reproduce the manufacturer’s charge-pump layout closely.
推薦
推薦產品摘要
工程參考資料,適用於 MAX3232ECAE+ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MAX3232ECWE+ | MAX3232ECPE+ | SP3232EBCA-L/TR | SP3232EBCN-L/TR | SP3232EBCN-L |
|---|---|---|---|---|---|---|
| Package | 16-pin SSOP | 16-pin SSOP | 16-pin SSOP | 16-pin SSOP | 16-pin SSOP | 16-pin SSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Sipex | Sipex | Texas Instruments |
主要差異化特點
- Supports high-speed true RS-232 communication (對比SP3232EBCA-L/TR)
- Wide compatibility with modern embedded supply rails (對比SP3232EBCN-L/TR)
- Connector-side transient protection (對比MAX3232ECPE+)
- Exact production package identified for footprint planning (對比MAX3232ECWE+)
設計說明
Place the four required 0.1 µF charge-pump capacitors directly beside pins 1, 2, 4, and 5, and connect pins 3 and 6 to the charge-pump network exactly as shown in the manufacturer application circuit. Keep these high-current switching loops compact and use the shortest practical ground return. Incorrect capacitor polarity or long charge-pump traces can reduce transmitter performance and increase radiated noise.
Separate the RS-232 driver outputs on pins 11 and 12 from receiver inputs on pins 13 and 14 to reduce coupling and false triggering. Route the serial lines directly toward the connector, maintain a continuous reference ground beneath or adjacent to the interface, and avoid sharing narrow neck areas with unrelated high-current switching nodes. Confirm the 16-pin SSOP land pattern against the mechanical drawing before fabrication.
Do not treat the MAX3232ECAE+ as a TTL-level RS-232 substitute; its charge-pump outputs produce the positive and negative voltages required by true RS-232. Also avoid confusing family suffixes that denote different package options. Confirm the exact 16-SSOP ordering code, preserve the specified 0.1 µF charge-pump capacitors, and observe the 3.0 V to 5.5 V supply limit.
合規資訊
The device is identified as a production true RS-232 transceiver conforming to TIA/EIA-232-F with ±15 kV ESD protection. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established.