Analog Devices

MAX3243EEWI+T - 3/5 RS-232 Transceiver | Analog Devices

MPN: MAX3243EEWI+T ✓ Nakahanda
3.0 V to 5.5 V Vdss 1 µA Id EIA/TIA-232 and V.28/V.24 Rds(on) 28-SOIC, 7.50 mm width Package
MOQ: 1 |

MAX3243EEWI+T Ulas

Analog Devices MAX3243EEWI+T is a 3-driver, 5-receiver RS-232 transceiver rated for 250 kbps operation, 3.0 V to 5.5 V supply operation, and ±15 kV ESD protection. The device is packaged in a 28-pin wide SOIC and is configured for a full RS-232 communications interface.

An RS-232 transceiver is an interface IC that combines differential line drivers and receivers for point-to-point serial communication. It translates host logic levels into RS-232 signal levels and converts received RS-232 signals back into digital levels. Within the interface hierarchy, the MAX3243E belongs to the RS-232 transceiver family of interface ICs, supporting industrial control, embedded systems, and communications equipment.

Three driver channels support simultaneous transmit functions, while five receiver channels support multiple incoming signals. Automatic shutdown and wakeup reduce supply consumption when the connected equipment is inactive. The MAX3243 family also supports a low-power operating mode, making it useful where a permanently connected serial interface must minimize standby demand.

The wide 3.0 V to 5.5 V supply range accommodates both 3.3 V and 5 V system rails. Enhanced electrostatic discharge protection on the interface pins helps improve robustness against cable-connected transients. The 250 kbps capability is suitable for moderate-speed data links, including configuration interfaces, service ports, and embedded serial connections.

Typical applications include industrial control systems, point-of-sale terminals, medical instrumentation, test equipment, and embedded processors requiring a longer RS-232 reach than an unbuffered UART can provide. The automatic shutdown feature is particularly valuable in portable or intermittently connected equipment where reducing inactive current improves overall energy efficiency.

Place the device close to the connector and route each RS-232 signal as a short differential pair. Keep logic-side traces away from cable-side pins to minimize coupling. Confirm that the external charge-pump capacitors and logic-level rails meet the circuit requirements in the MAX3243E datasheet before releasing the PCB.

This product page combines the manufacturer's device information, package and ordering details, cross-reference findings, and practical interface-layout guidance to support component selection and board-level implementation.

Mga alternatibo na pwedeng ilagay na MAX3243EEWI+T — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok MAX3243EEWI+T (parehas na form factor at footprint) — pagkakaiba sa ESD Protection, Package, Supply Current.

Analog Devices
ESD Protection: 15 kV
Package: 32-pin TQFN, 7 mm x 7 mm
Supply Current: 1 A maximum
Ikabit sa MAX3243EEWI+T →

SP3243EHEA-L/TR

✅ Drop-In
📦 28-SOIC
Pin-compatible functional equivalent with possible minor parametric differences from the MAX3243EEWI+T

📋 Alternatibo na Reference (hindi sa katalogo)

MAX3243EEWI+T Mga Spesipikasyon

Product Type RS-232 transceiver
Driver Channels 3
Receiver Channels 5
Configuration 3/5 full RS-232
Supply Voltage Range 3.0 V to 5.5 V
Maximum Data Rate 250 kbps
ESD Protection ±15 kV
Kuru-kuryente ng Pagbibigay 1 µA
Power Management Feature AutoShutdown with automatic wakeup
Standards Interface EIA/TIA-232 and V.28/V.24
Packhaging 28-SOIC, 7.50 mm width
Uri ng Pagpapasok Surface mount

Gabay sa Pin Configuration ng MAX3243EEWI+T 28-soic, 7.50 mm width

Pin configuration para sa MAX3243EEWI+T (28-soic, 7.50 mm width package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 28-soic, 7.50 mm width package para sa MAX3243EEWI+T

Wala ng detalyadong pinout data na magagamit para sa MAX3243EEWI+T.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MAX3243EEWI+T ay nararapat para sa 6 aplikasyons: Industrial Control Interfaces, Medical Instrument Connectivity, Point-of-Sale Terminals, Embedded Serial Service Ports, Test and Measurement Equipment, Portable and Battery Equipment.

🏭

Industrial Control Interfaces

The MAX3243EEWI+T fits industrial controllers that need more than one RS-232 receiver alongside multiple transmit channels. Its three drivers and five receivers provide flexible channel allocation for configuration ports, service interfaces, and external equipment connections. The 3.0 V to 5.5 V supply range allows use with 3.3 V control hardware or 5 V legacy subsystems. Its 250 kbps maximum rate is appropriate for supervisory commands, status reporting, and configuration transfers rather than continuous high-bandwidth streaming. The ±15 kV ESD rating adds useful protection at connector-adjacent circuits where cables may be handled during installation.

💊

Medical Instrument Connectivity

The MAX3243EEWI+T can support legacy RS-232 service and control connections in medical instruments where equipment modules still rely on buffered EIA/TIA-232 signaling. Five receiver channels are useful when a controller monitors several accessory or subsystem lines, while three drivers support outbound command paths. The 3.3 V to 5.5 V compatibility lets the interface operate beside modern embedded control logic. Its ±15 kV ESD protection is particularly relevant to connector routes exposed to user-accessible cables. Final medical-system suitability still depends on the complete device validation, risk assessment, and applicable regulatory requirements.

🖥️

Point-of-Sale Terminals

The MAX3243EEWI+T is appropriate for point-of-sale and peripheral-control systems that retain RS-232 connections for printers, scales, customer displays, or service tools. Its three transmitters and five receivers allow several device relationships to share one interface IC while conserving board area. Automatic shutdown is valuable when peripherals are connected intermittently because the MAX3243 family can reduce supply current to 1 µA after a valid signal is absent. The 250 kbps capability supports short transaction-oriented communications without imposing unnecessary bandwidth. Designers should still verify connector pinouts and cable directionality for each attached peripheral.

🔧

Embedded Serial Service Ports

The MAX3243EEWI+T fits embedded systems that expose an RS-232 service port for configuration, diagnostics, firmware loading, or field maintenance. Three driver channels can support control, status, and service paths, while five receiver inputs can monitor signals from multiple attached devices. Operation from 3.0 V to 5.5 V permits connection to a 3.3 V processor or a mixed-voltage control board. The AutoShutdown feature can reduce standby demand when the service cable is absent. Board implementation should preserve short cable-side routes, solid ground returns, and the datasheet-specified charge-pump capacitor network.

📺

Test and Measurement Equipment

The MAX3243EEWI+T is useful in test and measurement instruments that retain RS-232 for instrument control or legacy peripheral coordination. Its five receivers support monitoring several control or status inputs, while three drivers handle command and handshake signals. The 250 kbps maximum data rate is sufficient for typical SCPI-style command exchange and configuration traffic. ±15 kV ESD protection improves interface resilience when a bench lead is connected or disconnected, although layout and grounding remain important. The wide SOIC package is also convenient for servicing and thermal performance because its leads provide generous spacing and stronger solder-joint geometry.

📱

Portable and Battery Equipment

The MAX3243EEWI+T can serve portable or battery-powered equipment with a legacy RS-232 interface, particularly when the connection is used intermittently. The MAX3243 family's automatic shutdown and wakeup behavior reduces supply current to 1 µA when receiver inputs do not detect a valid signal, helping limit standby consumption. Its 3.0 V to 5.5 V operating range supports low-voltage logic systems, and the 28-SOIC package simplifies hand assembly compared with fine-pitch alternatives. Designers should evaluate whether the system needs a true RS-232 electrical connection, confirm the AutoShutdown timing, and select the lowest effective supply voltage to minimize internal power use.

What is the MAX3243EEWI+T?
The MAX3243EEWI+T is a 3-driver, 5-receiver RS-232 transceiver from Analog Devices. According to the MAX3243E manufacturer datasheet, it operates from 3.0 V to 5.5 V, supports data rates up to 250 kbps, provides ±15 kV ESD protection, and uses a 28-pin wide SOIC package. It is intended for systems requiring buffered EIA/TIA-232 and V.28/V.24 serial communication.
What are the key specifications of MAX3243EEWI+T that engineers should know?
The MAX3243EEWI+T combines three transmit channels, five receive channels, a 3.0 V to 5.5 V supply range, and a maximum data rate of 250 kbps. According to the MAX3243E manufacturer datasheet, its interface pins provide ±15 kV ESD protection, while AutoShutdown reduces supply current to 1 µA when no valid receiver signal is detected. The device is offered in a 28-pin wide SOIC package.
Where can I download the MAX3243EEWI+T datasheet PDF?
The MAX3243EEWI+T datasheet is available through Analog Devices' MAX3243E product page at https://www.analog.com/en/products/max3243e.html. That page provides the manufacturer's technical documentation for the MAX3221E, MAX3223E, and MAX3243E family, including the MAX3243E electrical characteristics, pin descriptions, interface circuits, and application information relevant to the MAX3243EEWI+T ordering code.
Where can I find the MAX3243EEWI+T pinout?
Use the pin-description table and package drawing in the MAX3243E manufacturer datasheet to locate the MAX3243EEWI+T pinout. The component uses a 28-pin wide SOIC package, and the datasheet maps the power pins, driver outputs, receiver inputs, charge-pump nodes, and logic-side control functions to the physical package. Confirm the exposed or unexposed pad construction for the exact ordering code before laying out the board.
What supply voltage does MAX3243EEWI+T require?
The MAX3243EEWI+T operates from 3.0 V to 5.5 V. According to the MAX3243E manufacturer datasheet, this range supports both 3.3 V and 5 V equipment designs. The device includes charge-pump circuitry for RS-232 signal generation, so its supply pins, ground connections, and required external capacitors must follow the reference circuit in the datasheet.
What is the maximum data rate of MAX3243EEWI+T?
The MAX3243EEWI+T supports serial data rates up to 250 kbps. According to Analog Devices' MAX3243E manufacturer datasheet, this rate is suitable for buffered RS-232 links that exceed the practical reach or noise immunity of a direct UART connection. Cable length, capacitance, grounding, and signal integrity remain important considerations even when the selected transceiver operates below its maximum rated data rate.
Does MAX3243EEWI+T support automatic power shutdown?
Yes, the MAX3243EEWI+T includes automatic shutdown and wakeup operation. According to the MAX3243E manufacturer datasheet, the on-board supply and drivers shut down when the receiver inputs do not detect a valid signal level, reducing supply current to 1 µA. A valid incoming signal wakes the device, making the feature useful for intermittently connected or battery-operated RS-232 equipment.
Is MAX3243EEWI+T suitable for industrial and medical equipment?
The MAX3243EEWI+T is suitable for RS-232 interfaces in industrial controllers, medical instruments, and other equipment requiring protected multi-channel serial communication. Its key advantages include three drivers, five receivers, a 250 kbps maximum rate, and ±15 kV ESD protection. The selected device should still be checked against the environmental, lifecycle, and compliance requirements of the finished equipment.
What can replace MAX3243EEWI+T as a drop-in part?
The SP3243EHEA-L/TR from Maxim Integrated Products is identified as a functional equivalent and pin-compatible option for the MAX3243EEWI+T. The MAXLinear cross-reference classifies it as a functional equivalent rather than guaranteeing identical specifications. Confirm the 28-SOIC pin arrangement, supply range, shutdown behavior, ESD rating, and channel assignment against the MAX3243E datasheet before approving a substitution.
Is MAX3243EEWI+T the same as SP3243EHEA-L/TR?
No unconditional equivalence should be assumed. The SP3243EHEA-L/TR is listed as a functional equivalent and pin-compatible cross-reference for the MAX3243EEWI+T, but functional equivalence does not establish identical electrical or environmental performance. Compare the driver and receiver counts, 3.0 V to 5.5 V operation, 250 kbps capability, shutdown thresholds, ESD protection, and 28-SOIC footprint before using it as a production replacement.
When should I choose MAX3243EEWI+T over SP3243EHEA-L/TR?
Choose the MAX3243EEWI+T when its documented Analog Devices specifications, supply behavior, and qualification are specifically required for the design. Consider the SP3243EHEA-L/TR when a second source is needed and its manufacturer documentation confirms equivalent operation. A pin-compatible footprint alone is insufficient: verify channel direction, shutdown logic, capacitor requirements, electrical limits, and production availability for the intended operating environment.
What is the difference between MAX3243EEWI+T and MAX3243EEUI+?
The MAX3243EEUI+ uses a 28-pin TSSOP package, while the MAX3243EEWI+T uses a 28-pin wide SOIC package. Their mechanical footprints and pin assignments therefore require verification rather than automatic substitution. The package difference is critical because a TSSOP lead pitch and body width do not match a wide SOIC land pattern, so the two parts should not be treated as direct drop-in alternatives.
Where can I buy MAX3243EEWI+T online?
Use the Request a Quote form on this page to request MAX3243EEWI+T pricing, current inventory, and lead time. The quote team can confirm the exact MAX3243EEWI+T ordering code, 28-SOIC package, reel or tray preference, and quantity requirements. No fixed price or stock commitment should be assumed until the quote is confirmed.
What is the price of MAX3243EEWI+T?
The current commercial price for MAX3243EEWI+T is obtained through the Request a Quote form on this page. Submit the required quantity, package preference, and delivery location so the quotation can reflect the exact ordering code and current availability. The structured product page supports quote preparation, but it does not guarantee that an older distributor listing reflects present stock or lead time.
What is the lead time and stock status for MAX3243EEWI+T?
Request the current MAX3243EEWI+T lead time, minimum order quantity, and stock allocation through the Request a Quote form on this page. Lead time can vary with order quantity, packaging method, and current component availability, so a firm date should be established at quotation. The manufacturer lists the MAX3243E family as a current product, but an order acknowledgment remains the authoritative schedule.

Impormasyon ng Talumpati sa Engineering for MAX3243EEWI+T — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the MAX3243EEWI+T when the board specifically requires a 3/5 RS-232 arrangement, 3.0 V to 5.5 V operation, data rates up to 250 kbps, and ±15 kV ESD protection in a 28-pin wide SOIC package. It is well suited to industrial controllers, medical instruments, test equipment, point-of-sale systems, and embedded service ports that benefit from automatic shutdown and wakeup. Consider SP3243EHEA-L/TR when a second source is needed and its documentation confirms equivalent channel arrangement, electrical limits, shutdown behavior, and 28-SOIC footprint. Do not substitute MAX3243EEUI+T without a mechanical redesign because its 28-pin TSSOP package has a different land pattern. Confirm cable-side protection, charge-pump capacitor placement, grounding, and connector routing in the manufacturer's application guidance before release.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto SP3243EHEA-L/TR
Brand Analog Devices Maxim Integrated
Package 28-SOIC 28-SOIC, pin compatible
Device Type 3/5 RS-232 transceiver RS-232 transceiver

Pangunahing mga Pagkakaiba

  • Broader channel allocation in the verified target configuration (kumpara saSP3243EHEA-L/TR)
  • Documented high-speed operation (kumpara saSP3243EHEA-L/TR)
  • Explicit wide-supply compatibility (kumpara saSP3243EHEA-L/TR)
  • Automatic low-power interface control (kumpara saSP3243EHEA-L/TR)

Talaan ng Disenyo

Place the MAX3243EEWI+T close to the RS-232 connector and follow the reference layout in the MAX3243E manufacturer datasheet. Keep driver outputs and receiver inputs away from sensitive logic traces, provide a direct ground return for each cable-side interface, and avoid routing high-current switching paths beneath the transceiver. The wide SOIC footprint permits comfortable assembly, but connector placement and signal direction should determine the final placement rather than package convenience alone.

Use the datasheet-specified charge-pump capacitors on the MAX3243EEWI+T because these components generate the RS-232 voltage levels used by the drivers. Place each capacitor close to its associated IC pin, keep the connection short, and observe the recommended capacitor type and tolerance. When AutoShutdown is used, verify the receiver signal thresholds and wakeup timing in the system so that normal traffic is not mistaken for an inactive interface.

Do not treat the SP3243EHEA-L/TR cross-reference as permission to substitute without a detailed review. Verify that its pin mapping, supply limits, channel arrangement, shutdown behavior, data rate, ESD rating, and external capacitor requirements match the MAX3243EEWI+T application. Also avoid confusing MAX3243EEUI+, which uses a 28-pin TSSOP package, with the MAX3243EEWI+T 28-pin wide SOIC because their physical land patterns are not interchangeable.

Keep the protected cable-side pins close to the connector and provide a low-impedance chassis or signal-ground return. Avoid long unprotected stubs, excessive loop area, and shared narrow ground paths between the transceiver and external equipment. If the cable can carry large electrostatic discharges, check the full board-level current path and place appropriate protection structures at the connector while observing the MAX3243E datasheet guidance for external components.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The MAX3243E product pages identify the interface family, electrical characteristics, and package information but do not state the requested compliance statuses. Confirm current material declarations with Analog Devices before using them in a regulated production design.

Data napatotohanan sa: 2026-11-17 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MAX3243EEWI+T datasheet MAX3243EEWI+T pinout MAX3243EEWI+T datasheet pdf MAX3243EEWI+T equivalent MAX3243EEWI+T replacement MAX3243EEWI+T vs SP3243EHEA-L/TR MAX3243EEWI+T price MAX3243EEWI+T stock Analog Devices MAX3243EEWI+T MAX3243EEWI+T 28-SOIC MAX3243EEWI+T application circuit MAX3243EEWI+T cross reference

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices MAX3243EEWI+T MAX3243E SP3243EHEA-L/TR Maxim Integrated RS-232 transceiver EIA/TIA-232 V.28 V.24 RS-232 interface IC interface IC semiconductor AutoShutdown automatic wakeup ESD protection 250 kbps 3.0 V to 5.5 V supply 28-SOIC SOIC package family surface mount RS-232 line driver RS-232 line receiver charge-pump capacitors industrial control medical instrumentation
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ