MAX3243EEWI+T - 3/5 RS-232 Transceiver | Analog Devices
料号: MAX3243EEWI+T ✓ 量产中MAX3243EEWI+T 概述
An RS-232 transceiver is an interface IC that combines differential line drivers and receivers for point-to-point serial communication. It translates host logic levels into RS-232 signal levels and converts received RS-232 signals back into digital levels. Within the interface hierarchy, the MAX3243E belongs to the RS-232 transceiver family of interface ICs, supporting industrial control, embedded systems, and communications equipment.
Three driver channels support simultaneous transmit functions, while five receiver channels support multiple incoming signals. Automatic shutdown and wakeup reduce supply consumption when the connected equipment is inactive. The MAX3243 family also supports a low-power operating mode, making it useful where a permanently connected serial interface must minimize standby demand.
The wide 3.0 V to 5.5 V supply range accommodates both 3.3 V and 5 V system rails. Enhanced electrostatic discharge protection on the interface pins helps improve robustness against cable-connected transients. The 250 kbps capability is suitable for moderate-speed data links, including configuration interfaces, service ports, and embedded serial connections.
Typical applications include industrial control systems, point-of-sale terminals, medical instrumentation, test equipment, and embedded processors requiring a longer RS-232 reach than an unbuffered UART can provide. The automatic shutdown feature is particularly valuable in portable or intermittently connected equipment where reducing inactive current improves overall energy efficiency.
Place the device close to the connector and route each RS-232 signal as a short differential pair. Keep logic-side traces away from cable-side pins to minimize coupling. Confirm that the external charge-pump capacitors and logic-level rails meet the circuit requirements in the MAX3243E datasheet before releasing the PCB.
This product page combines the manufacturer's device information, package and ordering details, cross-reference findings, and practical interface-layout guidance to support component selection and board-level implementation.
直接替换替代料: MAX3243EEWI+T ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: MAX3243EEWI+T (相同外形与封装尺寸) ——差异在于 ESD Protection, Package, Supply Current.
SP3243EHEA-L/TR
✅ 直接替换📋 参考替代料(不在目录中)
MAX3243EEWI+T 规格参数
| Product Type | RS-232 transceiver |
| Driver Channels | 3 |
| Receiver Channels | 5 |
| Configuration | 3/5 full RS-232 |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| ESD Protection | ±15 kV |
| 电源电流 | 1 µA |
| Power Management Feature | AutoShutdown with automatic wakeup |
| Standards Interface | EIA/TIA-232 and V.28/V.24 |
| 封装 | 28-SOIC, 7.50 mm width |
| 安装类型 | Surface mount |
MAX3243EEWI+T 28-soic, 7.50 mm width 引脚配置指南
MAX3243EEWI+T(28-soic, 7.50 mm width 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: MAX3243EEWI+T.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MAX3243EEWI+T 适用于 6 应用s: Industrial Control Interfaces, Medical Instrument Connectivity, Point-of-Sale Terminals, Embedded Serial Service Ports, Test and Measurement Equipment, Portable and Battery Equipment.
Industrial Control Interfaces
The MAX3243EEWI+T fits industrial controllers that need more than one RS-232 receiver alongside multiple transmit channels. Its three drivers and five receivers provide flexible channel allocation for configuration ports, service interfaces, and external equipment connections. The 3.0 V to 5.5 V supply range allows use with 3.3 V control hardware or 5 V legacy subsystems. Its 250 kbps maximum rate is appropriate for supervisory commands, status reporting, and configuration transfers rather than continuous high-bandwidth streaming. The ±15 kV ESD rating adds useful protection at connector-adjacent circuits where cables may be handled during installation.
推荐
Medical Instrument Connectivity
The MAX3243EEWI+T can support legacy RS-232 service and control connections in medical instruments where equipment modules still rely on buffered EIA/TIA-232 signaling. Five receiver channels are useful when a controller monitors several accessory or subsystem lines, while three drivers support outbound command paths. The 3.3 V to 5.5 V compatibility lets the interface operate beside modern embedded control logic. Its ±15 kV ESD protection is particularly relevant to connector routes exposed to user-accessible cables. Final medical-system suitability still depends on the complete device validation, risk assessment, and applicable regulatory requirements.
推荐
Point-of-Sale Terminals
The MAX3243EEWI+T is appropriate for point-of-sale and peripheral-control systems that retain RS-232 connections for printers, scales, customer displays, or service tools. Its three transmitters and five receivers allow several device relationships to share one interface IC while conserving board area. Automatic shutdown is valuable when peripherals are connected intermittently because the MAX3243 family can reduce supply current to 1 µA after a valid signal is absent. The 250 kbps capability supports short transaction-oriented communications without imposing unnecessary bandwidth. Designers should still verify connector pinouts and cable directionality for each attached peripheral.
推荐
Embedded Serial Service Ports
The MAX3243EEWI+T fits embedded systems that expose an RS-232 service port for configuration, diagnostics, firmware loading, or field maintenance. Three driver channels can support control, status, and service paths, while five receiver inputs can monitor signals from multiple attached devices. Operation from 3.0 V to 5.5 V permits connection to a 3.3 V processor or a mixed-voltage control board. The AutoShutdown feature can reduce standby demand when the service cable is absent. Board implementation should preserve short cable-side routes, solid ground returns, and the datasheet-specified charge-pump capacitor network.
推荐
Test and Measurement Equipment
The MAX3243EEWI+T is useful in test and measurement instruments that retain RS-232 for instrument control or legacy peripheral coordination. Its five receivers support monitoring several control or status inputs, while three drivers handle command and handshake signals. The 250 kbps maximum data rate is sufficient for typical SCPI-style command exchange and configuration traffic. ±15 kV ESD protection improves interface resilience when a bench lead is connected or disconnected, although layout and grounding remain important. The wide SOIC package is also convenient for servicing and thermal performance because its leads provide generous spacing and stronger solder-joint geometry.
推荐
Portable and Battery Equipment
The MAX3243EEWI+T can serve portable or battery-powered equipment with a legacy RS-232 interface, particularly when the connection is used intermittently. The MAX3243 family's automatic shutdown and wakeup behavior reduces supply current to 1 µA when receiver inputs do not detect a valid signal, helping limit standby consumption. Its 3.0 V to 5.5 V operating range supports low-voltage logic systems, and the 28-SOIC package simplifies hand assembly compared with fine-pitch alternatives. Designers should evaluate whether the system needs a true RS-232 electrical connection, confirm the AutoShutdown timing, and select the lowest effective supply voltage to minimize internal power use.
推荐
推荐产品汇总
工程参考数据: MAX3243EEWI+T ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | SP3243EHEA-L/TR |
|---|---|---|
| Brand | Analog Devices | Maxim Integrated |
| Package | 28-SOIC | 28-SOIC, pin compatible |
| Device Type | 3/5 RS-232 transceiver | RS-232 transceiver |
关键差异点
- Broader channel allocation in the verified target configuration (对比 SP3243EHEA-L/TR)
- Documented high-speed operation (对比 SP3243EHEA-L/TR)
- Explicit wide-supply compatibility (对比 SP3243EHEA-L/TR)
- Automatic low-power interface control (对比 SP3243EHEA-L/TR)
设计说明
Place the MAX3243EEWI+T close to the RS-232 connector and follow the reference layout in the MAX3243E manufacturer datasheet. Keep driver outputs and receiver inputs away from sensitive logic traces, provide a direct ground return for each cable-side interface, and avoid routing high-current switching paths beneath the transceiver. The wide SOIC footprint permits comfortable assembly, but connector placement and signal direction should determine the final placement rather than package convenience alone.
Use the datasheet-specified charge-pump capacitors on the MAX3243EEWI+T because these components generate the RS-232 voltage levels used by the drivers. Place each capacitor close to its associated IC pin, keep the connection short, and observe the recommended capacitor type and tolerance. When AutoShutdown is used, verify the receiver signal thresholds and wakeup timing in the system so that normal traffic is not mistaken for an inactive interface.
Do not treat the SP3243EHEA-L/TR cross-reference as permission to substitute without a detailed review. Verify that its pin mapping, supply limits, channel arrangement, shutdown behavior, data rate, ESD rating, and external capacitor requirements match the MAX3243EEWI+T application. Also avoid confusing MAX3243EEUI+, which uses a 28-pin TSSOP package, with the MAX3243EEWI+T 28-pin wide SOIC because their physical land patterns are not interchangeable.
Keep the protected cable-side pins close to the connector and provide a low-impedance chassis or signal-ground return. Avoid long unprotected stubs, excessive loop area, and shared narrow ground paths between the transceiver and external equipment. If the cable can carry large electrostatic discharges, check the full board-level current path and place appropriate protection structures at the connector while observing the MAX3243E datasheet guidance for external components.
合规信息
The MAX3243E product pages identify the interface family, electrical characteristics, and package information but do not state the requested compliance statuses. Confirm current material declarations with Analog Devices before using them in a regulated production design.