MAX3243EEWI+T - 3/5 RS-232 Transceiver | Analog Devices
MPN: MAX3243EEWI+T ✓ פעילMAX3243EEWI+T סקירה
An RS-232 transceiver is an interface IC that combines differential line drivers and receivers for point-to-point serial communication. It translates host logic levels into RS-232 signal levels and converts received RS-232 signals back into digital levels. Within the interface hierarchy, the MAX3243E belongs to the RS-232 transceiver family of interface ICs, supporting industrial control, embedded systems, and communications equipment.
Three driver channels support simultaneous transmit functions, while five receiver channels support multiple incoming signals. Automatic shutdown and wakeup reduce supply consumption when the connected equipment is inactive. The MAX3243 family also supports a low-power operating mode, making it useful where a permanently connected serial interface must minimize standby demand.
The wide 3.0 V to 5.5 V supply range accommodates both 3.3 V and 5 V system rails. Enhanced electrostatic discharge protection on the interface pins helps improve robustness against cable-connected transients. The 250 kbps capability is suitable for moderate-speed data links, including configuration interfaces, service ports, and embedded serial connections.
Typical applications include industrial control systems, point-of-sale terminals, medical instrumentation, test equipment, and embedded processors requiring a longer RS-232 reach than an unbuffered UART can provide. The automatic shutdown feature is particularly valuable in portable or intermittently connected equipment where reducing inactive current improves overall energy efficiency.
Place the device close to the connector and route each RS-232 signal as a short differential pair. Keep logic-side traces away from cable-side pins to minimize coupling. Confirm that the external charge-pump capacitors and logic-level rails meet the circuit requirements in the MAX3243E datasheet before releasing the PCB.
This product page combines the manufacturer's device information, package and ordering details, cross-reference findings, and practical interface-layout guidance to support component selection and board-level implementation.
חלופות תחליף ישיר עבור MAX3243EEWI+T — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם MAX3243EEWI+T (אותו גורם צורה וטביעת רגל) — שונים ב ESD Protection, Package, Supply Current.
SP3243EHEA-L/TR
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MAX3243EEWI+T מפרטים
| Product Type | RS-232 transceiver |
| Driver Channels | 3 |
| Receiver Channels | 5 |
| Configuration | 3/5 full RS-232 |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| ESD Protection | ±15 kV |
| זרם אספקה | 1 µA |
| Power Management Feature | AutoShutdown with automatic wakeup |
| Standards Interface | EIA/TIA-232 and V.28/V.24 |
| מארז | 28-SOIC, 7.50 mm width |
| סוג הרכבה | Surface mount |
מדריך תצורת פינים של MAX3243EEWI+T 28-soic, 7.50 mm width
תצורת פינים עבור MAX3243EEWI+T (מארזת 28-soic, 7.50 mm width). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור MAX3243EEWI+T.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
MAX3243EEWI+T מתאים עבור 6 יישוםs: Industrial Control Interfaces, Medical Instrument Connectivity, Point-of-Sale Terminals, Embedded Serial Service Ports, Test and Measurement Equipment, Portable and Battery Equipment.
Industrial Control Interfaces
The MAX3243EEWI+T fits industrial controllers that need more than one RS-232 receiver alongside multiple transmit channels. Its three drivers and five receivers provide flexible channel allocation for configuration ports, service interfaces, and external equipment connections. The 3.0 V to 5.5 V supply range allows use with 3.3 V control hardware or 5 V legacy subsystems. Its 250 kbps maximum rate is appropriate for supervisory commands, status reporting, and configuration transfers rather than continuous high-bandwidth streaming. The ±15 kV ESD rating adds useful protection at connector-adjacent circuits where cables may be handled during installation.
מומלץ
Medical Instrument Connectivity
The MAX3243EEWI+T can support legacy RS-232 service and control connections in medical instruments where equipment modules still rely on buffered EIA/TIA-232 signaling. Five receiver channels are useful when a controller monitors several accessory or subsystem lines, while three drivers support outbound command paths. The 3.3 V to 5.5 V compatibility lets the interface operate beside modern embedded control logic. Its ±15 kV ESD protection is particularly relevant to connector routes exposed to user-accessible cables. Final medical-system suitability still depends on the complete device validation, risk assessment, and applicable regulatory requirements.
מומלץ
Point-of-Sale Terminals
The MAX3243EEWI+T is appropriate for point-of-sale and peripheral-control systems that retain RS-232 connections for printers, scales, customer displays, or service tools. Its three transmitters and five receivers allow several device relationships to share one interface IC while conserving board area. Automatic shutdown is valuable when peripherals are connected intermittently because the MAX3243 family can reduce supply current to 1 µA after a valid signal is absent. The 250 kbps capability supports short transaction-oriented communications without imposing unnecessary bandwidth. Designers should still verify connector pinouts and cable directionality for each attached peripheral.
מומלץ
Embedded Serial Service Ports
The MAX3243EEWI+T fits embedded systems that expose an RS-232 service port for configuration, diagnostics, firmware loading, or field maintenance. Three driver channels can support control, status, and service paths, while five receiver inputs can monitor signals from multiple attached devices. Operation from 3.0 V to 5.5 V permits connection to a 3.3 V processor or a mixed-voltage control board. The AutoShutdown feature can reduce standby demand when the service cable is absent. Board implementation should preserve short cable-side routes, solid ground returns, and the datasheet-specified charge-pump capacitor network.
מומלץ
Test and Measurement Equipment
The MAX3243EEWI+T is useful in test and measurement instruments that retain RS-232 for instrument control or legacy peripheral coordination. Its five receivers support monitoring several control or status inputs, while three drivers handle command and handshake signals. The 250 kbps maximum data rate is sufficient for typical SCPI-style command exchange and configuration traffic. ±15 kV ESD protection improves interface resilience when a bench lead is connected or disconnected, although layout and grounding remain important. The wide SOIC package is also convenient for servicing and thermal performance because its leads provide generous spacing and stronger solder-joint geometry.
מומלץ
Portable and Battery Equipment
The MAX3243EEWI+T can serve portable or battery-powered equipment with a legacy RS-232 interface, particularly when the connection is used intermittently. The MAX3243 family's automatic shutdown and wakeup behavior reduces supply current to 1 µA when receiver inputs do not detect a valid signal, helping limit standby consumption. Its 3.0 V to 5.5 V operating range supports low-voltage logic systems, and the 28-SOIC package simplifies hand assembly compared with fine-pitch alternatives. Designers should evaluate whether the system needs a true RS-232 electrical connection, confirm the AutoShutdown timing, and select the lowest effective supply voltage to minimize internal power use.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור MAX3243EEWI+T — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | SP3243EHEA-L/TR |
|---|---|---|
| Brand | Analog Devices | Maxim Integrated |
| Package | 28-SOIC | 28-SOIC, pin compatible |
| Device Type | 3/5 RS-232 transceiver | RS-232 transceiver |
מבדילים עיקריים
- Broader channel allocation in the verified target configuration (לעומתSP3243EHEA-L/TR)
- Documented high-speed operation (לעומתSP3243EHEA-L/TR)
- Explicit wide-supply compatibility (לעומתSP3243EHEA-L/TR)
- Automatic low-power interface control (לעומתSP3243EHEA-L/TR)
הערות תכנון
Place the MAX3243EEWI+T close to the RS-232 connector and follow the reference layout in the MAX3243E manufacturer datasheet. Keep driver outputs and receiver inputs away from sensitive logic traces, provide a direct ground return for each cable-side interface, and avoid routing high-current switching paths beneath the transceiver. The wide SOIC footprint permits comfortable assembly, but connector placement and signal direction should determine the final placement rather than package convenience alone.
Use the datasheet-specified charge-pump capacitors on the MAX3243EEWI+T because these components generate the RS-232 voltage levels used by the drivers. Place each capacitor close to its associated IC pin, keep the connection short, and observe the recommended capacitor type and tolerance. When AutoShutdown is used, verify the receiver signal thresholds and wakeup timing in the system so that normal traffic is not mistaken for an inactive interface.
Do not treat the SP3243EHEA-L/TR cross-reference as permission to substitute without a detailed review. Verify that its pin mapping, supply limits, channel arrangement, shutdown behavior, data rate, ESD rating, and external capacitor requirements match the MAX3243EEWI+T application. Also avoid confusing MAX3243EEUI+, which uses a 28-pin TSSOP package, with the MAX3243EEWI+T 28-pin wide SOIC because their physical land patterns are not interchangeable.
Keep the protected cable-side pins close to the connector and provide a low-impedance chassis or signal-ground return. Avoid long unprotected stubs, excessive loop area, and shared narrow ground paths between the transceiver and external equipment. If the cable can carry large electrostatic discharges, check the full board-level current path and place appropriate protection structures at the connector while observing the MAX3243E datasheet guidance for external components.
מידע על תאימות
The MAX3243E product pages identify the interface family, electrical characteristics, and package information but do not state the requested compliance statuses. Confirm current material declarations with Analog Devices before using them in a regulated production design.