MAX3243EIPWG4 - RS-232 Transceiver | Texas Instruments
MPN: MAX3243EIPWG4 ✗ Tapus ng BuhayMAX3243EIPWG4 Ulas
An RS-232 transceiver is an interface IC that combines a line driver, which converts logic-level signals into RS-232 voltage levels, with a receiver, which converts incoming RS-232 signals back into logic-compatible levels. It belongs to the communication-interface hierarchy: transceiver → RS-232 interface IC → interface IC → integrated circuit. This integration reduces the component count and board area required for multiport serial connections.
The MAX3243EIPWG4 provides four driver and four receiver channels, allowing two complete bidirectional RS-232 ports to be implemented with one package. Its 3 V to 5.5 V operating range supports both 3.3 V and 5 V system rails. The 250 kbps maximum data rate is suitable for legacy serial ports, industrial equipment, data-acquisition systems, and embedded control links.
The MAX3243E designation adds enhanced electrostatic-discharge protection to the serial connections. The manufacturer describes ±15 kV IEC ESD protection, while component data also identifies ±15 kV HBM and air-gap discharge protection and ±8 kV IEC61000-4-2 contact-discharge protection. These ratings strengthen the external serial interface against electrostatic events encountered during connection, servicing, and industrial operation.
Typical uses include industrial serial controllers, test and measurement equipment, point-of-sale terminals, security equipment, and embedded systems that retain an RS-232 port. The device is also useful when legacy peripherals must coexist with modern low-voltage logic because its receive and transmit functions operate from the same 3 V to 5.5 V supply range.
Designers should preserve the recommended charge-pump capacitor and interface-decoupling networks, route protected connector pins directly to the device, and maintain an unobstructed return path for RS-232 signals. Because the exact MPN is listed as obsolete, new production designs should first confirm lifecycle requirements and compare the current MAX3243 family ordering options.
This product page combines the manufacturer specifications, interface-protection ratings, package information, lifecycle status, and verified replacement context into a design-focused reference. It also highlights where a same-package substitute may require review of ESD ratings, temperature coverage, or ordering qualification.
Mga alternatibo na pwedeng ilagay na MAX3243EIPWG4 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok MAX3243EIPWG4 (parehas na form factor at footprint) — pagkakaiba sa Maximum Data Rate, Product Type, Package, Supply Voltage Range, Operating Temperature Range.
MAX3243EEUI+T
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →MAX3243ECPWR
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →MAX3243CPWR
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →MAX3243EIPWG4 Mga Spesipikasyon
| Product Type | Multichannel RS-232 line driver/receiver |
| Number of Driver/Receiver Channels | 4 drivers and 4 receivers |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| IEC ESD Protection | ±15 kV |
| HBM ESD Protection | ±15 kV |
| Air-Gap ESD Protection | ±15 kV |
| IEC61000-4-2 Contact Discharge | ±8 kV |
| Hanay ng Temperature na Operasyon | -40°C to +85°C |
| Packhaging | 28-pin TSSOP |
| Uri ng Pagpapasok | Surface mount |
| RS-232 Standard Compliance | A/EIA-232-F |
Gabay sa Pin Configuration ng MAX3243EIPWG4 28-pin tssop
Pin configuration para sa MAX3243EIPWG4 (28-pin tssop package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa MAX3243EIPWG4.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
MAX3243EIPWG4 ay nararapat para sa 6 aplikasyons: Industrial Serial Controllers, Point-of-Sale Terminals, Test and Measurement Equipment, Data Acquisition Systems, Security and Access-Control Equipment, Legacy Peripheral Connectivity.
Industrial Serial Controllers
The MAX3243EIPWG4 fits industrial controllers that must retain RS-232 connectivity while operating from 3.3 V or 5 V logic rails. Its four drivers and four receivers can form two bidirectional ports, reducing the number of separate interface ICs required on the controller board. The 250 kbps rate supports equipment using legacy serial protocols, while the -40°C to +85°C range covers typical industrial environments. The ±15 kV IEC ESD rating is especially relevant when the connector is exposed to frequently connected field cables.
Point-of-Sale Terminals
Point-of-sale terminals often combine a low-voltage processor with a legacy RS-232 peripheral interface. The MAX3243EIPWG4 accommodates both 3.3 V and 5 V supply systems and provides two complete bidirectional ports from four drivers and four receivers. A 250 kbps data rate is sufficient for scanners, receipt devices, and service interfaces that use RS-232. The enhanced ESD protection adds resilience at an externally accessible connector, although the obsolete ordering status requires lifecycle approval for new deployments.
Test and Measurement Equipment
The MAX3243EIPWG4 is suitable for test and measurement instruments that communicate with legacy RS-232 equipment through multiple ports. Two bidirectional channels can be implemented in a single 28-pin TSSOP, conserving board area beside instruments with limited connector space. Its 3 V to 5.5 V range allows use with mixed-voltage control logic, and the 250 kbps rate matches many laboratory and industrial-control command interfaces. External connector protection remains important because users may connect unknown or field-wired equipment.
Data Acquisition Systems
Data-acquisition front ends can use the MAX3243EIPWG4 to connect a controller or host to RS-232 instruments over separate bidirectional links. Four driver channels and four receiver channels allow two ports to share one device, reducing repeated level-shifting circuitry. The 250 kbps signaling rate is appropriate for command traffic and moderate legacy data transfers. Operating from 3 V to 5.5 V supports modern acquisition controllers, while the enhanced IEC ESD protection helps protect the interface when connected to externally accessible equipment.
Security and Access-Control Equipment
Security controllers, access-control panels, and alarm interfaces may need RS-232 compatibility alongside a newer embedded processor. The MAX3243EIPWG4 translates between logic-level signals and RS-232 voltage levels while accommodating either 3.3 V or 5 V system supplies. Two complete ports can be implemented by pairing the four drivers with four receivers, helping conserve PCB space. The ±15 kV IEC ESD rating is useful at accessible panel connectors, but cable routing and grounding must still be designed to control RS-232 emissions and susceptibility.
Legacy Peripheral Connectivity
The MAX3243EIPWG4 supports retrofits and factory equipment that combine modern embedded control with legacy RS-232 printers, scales, programmers, or service interfaces. Its 250 kbps data rate fits numerous established RS-232 protocols, and its 3 V to 5.5 V supply range reduces level-conversion requirements around modern processors. Four channels per direction permit multiple peripherals where board space is constrained. Before production use, verify the obsolete lifecycle status and confirm that the exact interface, temperature, and ESD requirements remain unchanged in the replacement design.
Impormasyon ng Talumpati sa Engineering for MAX3243EIPWG4 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | MAX3243EEUI+T | MAX3243ECPWR | MAX3243CPWR |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 28-TSSOP | 28-TSSOP | 28-TSSOP | 28-TSSOP |
| Product Type | Multichannel RS-232 line driver/receiver | Multichannel RS-232 line driver/receiver | Multichannel RS-232 line driver/receiver | Multichannel RS-232 line driver/receiver |
Pangunahing mga Pagkakaiba
- Enhanced IEC ESD protection (kumpara saMAX3243ECPWR)
- Four-channel port integration (kumpara saMAX3243CPWR)
- Wide low-voltage supply compatibility (kumpara saMAX3243EEUI+T)
Talaan ng Disenyo
Place the required charge-pump capacitors, supply bypass capacitors, and receiver/load capacitors directly beside their associated MAX3243EIPWG4 pins. Keep the high-voltage RS-232 connector-side traces away from low-level logic, clocks, and sensitive analog inputs. Connector protection components should be positioned between the external pins and the IC so surge and electrostatic-discharge currents are diverted before reaching the device.
Treat the RS-232 driver outputs as high-voltage, edge-rate-sensitive nets. Use a solid ground reference, avoid long parallel runs, and minimize stub branches between the transceiver and connector. The charge-pump and interface networks must follow the manufacturer reference layout because incorrect capacitor placement can increase ripple, emissions, or receiver instability. Verify operation with an oscilloscope across the connector pins under the intended cable load.
Do not equate a matching TSSOP footprint with automatic interchangeability. Confirm every pin name, the 3 V to 5.5 V supply limits, enable behavior, charge-pump requirements, temperature grade, and ESD ratings before substituting MAX3243EEUI+T, MAX3243ECPWR, or MAX3243CPWR. Because MAX3243EIPWG4 is obsolete, retain a controlled BOM and validate any replacement through system-level serial and electrostatic-discharge testing.
Impormasyon ng Pagsunod sa Kautusan
The MAX3243 documentation identifies A/EIA-232-F compliance and IEC61000-4-2 ESD protection. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status are not stated in the product information and remain unknown.