Texas Instruments

MAX3243EIPWG4 - RS-232 Transceiver | Texas Instruments

MPN: MAX3243EIPWG4 ✗ Akhir Hayat
3 V to 5.5 V Vdss 28-pin TSSOP Package
MOQ: 1 |

MAX3243EIPWG4 Ringkasan

Texas Instruments MAX3243EIPWG4 is a four-channel RS-232 line driver and receiver with 3 V to 5.5 V supply operation, 250 kbps data signaling, and ±15 kV IEC ESD protection. The device is packaged in a 28-pin TSSOP and operates from -40°C to +85°C.

An RS-232 transceiver is an interface IC that combines a line driver, which converts logic-level signals into RS-232 voltage levels, with a receiver, which converts incoming RS-232 signals back into logic-compatible levels. It belongs to the communication-interface hierarchy: transceiver → RS-232 interface IC → interface IC → integrated circuit. This integration reduces the component count and board area required for multiport serial connections.

The MAX3243EIPWG4 provides four driver and four receiver channels, allowing two complete bidirectional RS-232 ports to be implemented with one package. Its 3 V to 5.5 V operating range supports both 3.3 V and 5 V system rails. The 250 kbps maximum data rate is suitable for legacy serial ports, industrial equipment, data-acquisition systems, and embedded control links.

The MAX3243E designation adds enhanced electrostatic-discharge protection to the serial connections. The manufacturer describes ±15 kV IEC ESD protection, while component data also identifies ±15 kV HBM and air-gap discharge protection and ±8 kV IEC61000-4-2 contact-discharge protection. These ratings strengthen the external serial interface against electrostatic events encountered during connection, servicing, and industrial operation.

Typical uses include industrial serial controllers, test and measurement equipment, point-of-sale terminals, security equipment, and embedded systems that retain an RS-232 port. The device is also useful when legacy peripherals must coexist with modern low-voltage logic because its receive and transmit functions operate from the same 3 V to 5.5 V supply range.

Designers should preserve the recommended charge-pump capacitor and interface-decoupling networks, route protected connector pins directly to the device, and maintain an unobstructed return path for RS-232 signals. Because the exact MPN is listed as obsolete, new production designs should first confirm lifecycle requirements and compare the current MAX3243 family ordering options.

This product page combines the manufacturer specifications, interface-protection ratings, package information, lifecycle status, and verified replacement context into a design-focused reference. It also highlights where a same-package substitute may require review of ESD ratings, temperature coverage, or ordering qualification.

Pilihan pengganti yang segera untuk MAX3243EIPWG4 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera MAX3243EIPWG4 (sama faktor bentuk dan kaki) — berbeza dalam Maximum Data Rate, Product Type, Package, Supply Voltage Range, Operating Temperature Range.

Texas Instruments
Product Type: RS-232 line driver/receiver transceiver
Package: 28-pin TSSOP (PW)
Operating Temperature Range: 0°C to 70°C
Bandingkan Dengan MAX3243EIPWG4 →
Texas Instruments
Maximum Data Rate: 500 kbps
Bandingkan Dengan MAX3243EIPWG4 →
Analog Devices
Maximum Data Rate: 250kbps
Product Type: RS-232 transceiver
Supply Voltage Range: 3.0V to 5.5V
Bandingkan Dengan MAX3243EIPWG4 →

MAX3243EEUI+T

✅ Masuk Drop-In
Analog Devices
📦 28-TSSOP
RS-232 transceiver · 3.0V to 5.5V · 250kbps · 3 drivers · 5 receivers · Full duplex · ±15kV · 1µA

Hubungi untuk harga

Lihat Datasheet →

MAX3243ECPWR

✅ Masuk Drop-In
Texas Instruments
📦 28-TSSOP
3/5 multichannel RS-232 line driver/receiver · 3 V to 5.5 V · 500 kbps · 3 · 5 · 2 · ±15 kV · ±8 kV

Hubungi untuk harga

Lihat Datasheet →

MAX3243CPWR

✅ Masuk Drop-In
Texas Instruments
📦 28-TSSOP
RS-232 line driver/receiver transceiver · 3 · 5 · 3 V to 5.5 V · 250 kbps · ±15 kV HBM · 0°C to 70°C · 28-pin TSSOP (PW)

Hubungi untuk harga

Lihat Datasheet →

MAX3243EIPWG4 Spesifikasi

Product Type Multichannel RS-232 line driver/receiver
Number of Driver/Receiver Channels 4 drivers and 4 receivers
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
IEC ESD Protection ±15 kV
HBM ESD Protection ±15 kV
Air-Gap ESD Protection ±15 kV
IEC61000-4-2 Contact Discharge ±8 kV
Gambaran Suhu Operasi -40°C to +85°C
Kemasan 28-pin TSSOP
Jenis Pemasangan Surface mount
RS-232 Standard Compliance A/EIA-232-F

Panduan Konfigurasi Pin MAX3243EIPWG4 28-pin tssop

Konfigurasi pin untuk MAX3243EIPWG4 (28-pin tssop pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 28-pin tssop untuk MAX3243EIPWG4

Tiada data garisan pin yang diperoleh untuk MAX3243EIPWG4.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

MAX3243EIPWG4 patut untuk 6 aplikasis: Industrial Serial Controllers, Point-of-Sale Terminals, Test and Measurement Equipment, Data Acquisition Systems, Security and Access-Control Equipment, Legacy Peripheral Connectivity.

🏭

Industrial Serial Controllers

The MAX3243EIPWG4 fits industrial controllers that must retain RS-232 connectivity while operating from 3.3 V or 5 V logic rails. Its four drivers and four receivers can form two bidirectional ports, reducing the number of separate interface ICs required on the controller board. The 250 kbps rate supports equipment using legacy serial protocols, while the -40°C to +85°C range covers typical industrial environments. The ±15 kV IEC ESD rating is especially relevant when the connector is exposed to frequently connected field cables.

🖥️

Point-of-Sale Terminals

Point-of-sale terminals often combine a low-voltage processor with a legacy RS-232 peripheral interface. The MAX3243EIPWG4 accommodates both 3.3 V and 5 V supply systems and provides two complete bidirectional ports from four drivers and four receivers. A 250 kbps data rate is sufficient for scanners, receipt devices, and service interfaces that use RS-232. The enhanced ESD protection adds resilience at an externally accessible connector, although the obsolete ordering status requires lifecycle approval for new deployments.

🔧

Test and Measurement Equipment

The MAX3243EIPWG4 is suitable for test and measurement instruments that communicate with legacy RS-232 equipment through multiple ports. Two bidirectional channels can be implemented in a single 28-pin TSSOP, conserving board area beside instruments with limited connector space. Its 3 V to 5.5 V range allows use with mixed-voltage control logic, and the 250 kbps rate matches many laboratory and industrial-control command interfaces. External connector protection remains important because users may connect unknown or field-wired equipment.

📡

Data Acquisition Systems

Data-acquisition front ends can use the MAX3243EIPWG4 to connect a controller or host to RS-232 instruments over separate bidirectional links. Four driver channels and four receiver channels allow two ports to share one device, reducing repeated level-shifting circuitry. The 250 kbps signaling rate is appropriate for command traffic and moderate legacy data transfers. Operating from 3 V to 5.5 V supports modern acquisition controllers, while the enhanced IEC ESD protection helps protect the interface when connected to externally accessible equipment.

🛡️

Security and Access-Control Equipment

Security controllers, access-control panels, and alarm interfaces may need RS-232 compatibility alongside a newer embedded processor. The MAX3243EIPWG4 translates between logic-level signals and RS-232 voltage levels while accommodating either 3.3 V or 5 V system supplies. Two complete ports can be implemented by pairing the four drivers with four receivers, helping conserve PCB space. The ±15 kV IEC ESD rating is useful at accessible panel connectors, but cable routing and grounding must still be designed to control RS-232 emissions and susceptibility.

🔌

Legacy Peripheral Connectivity

The MAX3243EIPWG4 supports retrofits and factory equipment that combine modern embedded control with legacy RS-232 printers, scales, programmers, or service interfaces. Its 250 kbps data rate fits numerous established RS-232 protocols, and its 3 V to 5.5 V supply range reduces level-conversion requirements around modern processors. Four channels per direction permit multiple peripherals where board space is constrained. Before production use, verify the obsolete lifecycle status and confirm that the exact interface, temperature, and ESD requirements remain unchanged in the replacement design.

What is the MAX3243EIPWG4?
The MAX3243EIPWG4 is a four-channel RS-232 line driver and receiver from Texas Instruments. It operates from 3 V to 5.5 V, supports data rates up to 250 kbps, and provides ±15 kV IEC ESD protection on the serial connections. According to the Texas Instruments MAX3243 product information, the device is packaged in a 28-pin TSSOP and is designed for multichannel RS-232 interface requirements.
How many RS-232 channels does the MAX3243EIPWG4 provide?
The MAX3243EIPWG4 provides four line-driver channels and four line-receiver channels. These channels can be arranged as two complete bidirectional RS-232 ports when paired driver-to-receiver, allowing one package to replace two single-port interface devices. Texas Instruments identifies the MAX3243 as a multichannel RS-232 line driver/receiver supporting operation from 3 V to 5.5 V.
What is the operating voltage of MAX3243EIPWG4?
The MAX3243EIPWG4 operates from 3 V to 5.5 V according to the Texas Instruments MAX3243 product information. This range supports 3.3 V and 5 V system rails and allows the interface IC to share a supply with either 3.3 V or 5 V digital logic. Keep the supply within the rated range and follow the datasheet bypass-capacitor recommendations.
What is the maximum data rate of MAX3243EIPWG4?
The MAX3243EIPWG4 supports RS-232 data rates up to 250 kbps. Texas Instruments identifies the MAX3243 as a 3 V to 5.5 V multichannel 250 kbps RS-232 line driver/receiver. The rate is appropriate for legacy serial equipment, embedded controllers, and industrial interfaces, but cable length, capacitance, and system timing should also be checked during design.
What ESD protection does MAX3243EIPWG4 provide?
The MAX3243EIPWG4 provides ±15 kV IEC ESD protection on its serial-port connections. Component documentation also identifies ±15 kV HBM and air-gap discharge protection, plus ±8 kV IEC61000-4-2 contact-discharge protection. According to Texas Instruments, the MAX3243 family includes enhanced ESD protection for improved reliability at exposed RS-232 connector interfaces.
Where can I download the MAX3243EIPWG4 datasheet PDF?
The official MAX3243 datasheet and product information are available from the Texas Instruments product page at https://www.ti.com/product/MAX3243. The device is the MAX3243EIPWG4 ordering variant, so its pin assignments, electrical limits, capacitor values, and package details should be checked against the manufacturer datasheet before layout or schematic release.
Where is the MAX3243EIPWG4 pinout located?
The MAX3243EIPWG4 pinout is located in the pin-description and package-drawing sections of the Texas Instruments MAX3243 datasheet. The device uses a 28-pin TSSOP package. Use the manufacturer pin table when assigning driver outputs, receiver inputs, charge-pump nodes, supply pins, and enable controls because signal names and functions must follow the exact package drawing.
MAX3243EIPWG4 vs MAX3243ECPWR: which is better for industrial equipment?
MAX3243ECPWR is the better candidate only when its standard ESD protection is acceptable, while MAX3243EIPWG4 provides the enhanced IEC-rated protection emphasized by the MAX3243E family. Both use the same 28-pin TSSOP family arrangement, but the E designation is important for exposed industrial connectors. Review the complete pin descriptions, temperature range, and protection ratings before substitution.
What is the difference between MAX3243EIPWG4 and MAX3243EEUI+T?
MAX3243EIPWG4 and MAX3243EEUI+T are members of the same MAX3243E multichannel RS-232 interface family and use compatible 28-pin TSSOP-style packages. The ordering codes distinguish the specific temperature grade and shipment form rather than the core four-channel transceiver function. Check the manufacturer ordering table for exact grade, package, and reel or tube details before treating either part as a direct substitution.
When should I choose MAX3243EIPWG4 over MAX3243ECPWR?
Choose MAX3243EIPWG4 when the external RS-232 connector requires the enhanced IEC ESD protection associated with the MAX3243E family. Choose MAX3243ECPWR when its protection ratings meet the product’s risk assessment and lifecycle needs. The key selection point is connector exposure: the E designation provides a meaningful benefit when cables are routinely attached or disconnected in uncontrolled environments.
What is the best drop-in replacement for MAX3243EIPWG4?
MAX3243EEUI+T is the closest same-family candidate identified for a possible drop-in replacement, but it should not be accepted solely because the package family matches. The complete ordering details, temperature grade, ESD ratings, and manufacturing status must be checked in the Texas Instruments MAX3243 documentation. MAX3243ECPWR and MAX3243CPWR are also same-package interface options with different protection characteristics.
Can MAX3243ECPWR replace MAX3243EIPWG4?
MAX3243ECPWR may provide the same 28-pin TSSOP footprint and core RS-232 function, but it lacks the enhanced IEC protection designation of the MAX3243EIPWG4. A footprint-compatible replacement is not automatically a functional drop-in when ESD requirements differ. Use the MAX3243ECPWR datasheet to compare every pin, supply requirement, data rate, and protection rating.
Is MAX3243EIPWG4 suitable for industrial RS-232 equipment?
The MAX3243EIPWG4 is suitable for industrial RS-232 equipment when its -40°C to +85°C operating range and enhanced ESD ratings satisfy the product requirements. Its four drivers and four receivers support two bidirectional ports, while the 3 V to 5.5 V supply range supports common industrial logic levels. The exact ordering variant is listed as obsolete, so lifecycle approval is essential.
Where can I buy MAX3243EIPWG4 and check its price?
Use the Request a Quote form on this page to request the current price, stock position, minimum order quantity, and lead time for MAX3243EIPWG4. The exact MPN is listed as obsolete, so availability may be limited and should be confirmed before committing a new production order. The form connects the request directly with the current XAIPART quotation process.
Is MAX3243EIPWG4 in stock and what is its lead time?
The current stock and lead time for MAX3243EIPWG4 should be confirmed through the Request a Quote form on this page. The exact ordering variant is identified as obsolete, which can make inventory and delivery timing dependent on remaining supply. Provide the required quantity and target delivery date with the request for a production-suitable quotation.
What are the key specifications of MAX3243EIPWG4 that engineers should know?
The principal MAX3243EIPWG4 specifications are 3 V to 5.5 V operation, 250 kbps maximum data rate, four driver and four receiver channels, ±15 kV IEC ESD protection, and a 28-pin TSSOP package. Texas Instruments also identifies an operating range of -40°C to +85°C for this family variant. These parameters determine supply compatibility, port count, connector protection, thermal design, and PCB footprint selection.

Data referensi kejuruteraan untuk MAX3243EIPWG4 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose MAX3243EIPWG4 when maintaining an existing design requires the exact Texas Instruments ordering variant, a 3 V to 5.5 V supply, four drivers and four receivers, and the enhanced IEC ESD protection associated with the MAX3243E family. Its exact ordering code is listed as obsolete, so lifecycle approval is required before new production use. MAX3243EEUI+T is the closest same-family candidate when its ordering, temperature, and packaging details satisfy the system requirements. Consider MAX3243ECPWR or MAX3243CPWR only when their respective ESD-protection ratings meet the connector risk assessment. All three alternatives use the 28-TSSOP family format, but package compatibility alone does not remove the need to verify every pin and electrical specification. For exposed industrial connectors, enhanced IEC protection and validated ESD performance should take priority over minor ordering-code differences.

Perbandingan dengan Gantian

Parametr Produk Ini MAX3243EEUI+T MAX3243ECPWR MAX3243CPWR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 28-TSSOP 28-TSSOP 28-TSSOP 28-TSSOP
Product Type Multichannel RS-232 line driver/receiver Multichannel RS-232 line driver/receiver Multichannel RS-232 line driver/receiver Multichannel RS-232 line driver/receiver

Penyeberangsung Jelas

  • Enhanced IEC ESD protection (vsMAX3243ECPWR)
  • Four-channel port integration (vsMAX3243CPWR)
  • Wide low-voltage supply compatibility (vsMAX3243EEUI+T)

Catatan Desain

Place the required charge-pump capacitors, supply bypass capacitors, and receiver/load capacitors directly beside their associated MAX3243EIPWG4 pins. Keep the high-voltage RS-232 connector-side traces away from low-level logic, clocks, and sensitive analog inputs. Connector protection components should be positioned between the external pins and the IC so surge and electrostatic-discharge currents are diverted before reaching the device.

Treat the RS-232 driver outputs as high-voltage, edge-rate-sensitive nets. Use a solid ground reference, avoid long parallel runs, and minimize stub branches between the transceiver and connector. The charge-pump and interface networks must follow the manufacturer reference layout because incorrect capacitor placement can increase ripple, emissions, or receiver instability. Verify operation with an oscilloscope across the connector pins under the intended cable load.

Do not equate a matching TSSOP footprint with automatic interchangeability. Confirm every pin name, the 3 V to 5.5 V supply limits, enable behavior, charge-pump requirements, temperature grade, and ESD ratings before substituting MAX3243EEUI+T, MAX3243ECPWR, or MAX3243CPWR. Because MAX3243EIPWG4 is obsolete, retain a controlled BOM and validate any replacement through system-level serial and electrostatic-discharge testing.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The MAX3243 documentation identifies A/EIA-232-F compliance and IEC61000-4-2 ESD protection. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status are not stated in the product information and remain unknown.

Data disahkan pada: 2026-11-09 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

MAX3243EIPWG4 datasheet MAX3243EIPWG4 pinout MAX3243EIPWG4 datasheet pdf Texas Instruments MAX3243EIPWG4 MAX3243EIPWG4 equivalent MAX3243EIPWG4 replacement MAX3243EIPWG4 cross reference MAX3243EIPWG4 footprint MAX3243EIPWG4 price MAX3243EIPWG4 stock MAX3243EIPWG4 vs MAX3243ECPWR MAX3243 4 channel RS-232 transceiver MAX3243EIPWG4 industrial serial interface 28-TSSOP RS-232 transceiver

Komponen dan Tanda berkaitan

Texas Instruments MAX3243EIPWG4 MAX3243EEUI+T MAX3243ECPWR MAX3243CPWR RS-232 transceiver line driver line receiver multichannel interface IC communication interface integrated circuit semiconductor 3 V to 5.5 V power supply 250 kbps data rate IEC ESD protection IEC61000-4-2 HBM ESD protection air-gap discharge A/EIA-232-F 28-pin TSSOP TSSOP package family surface-mount technology industrial RS-232 point-of-sale terminal data-acquisition system
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ