Texas Instruments

MAX3243IPWRG4 - 250kbps RS-232 Transceiver | Texas Instruments

MPN: MAX3243IPWRG4 ✓ Nakahanda
3 V to 5.5 V Vdss 1 uA Id 28-pin TSSOP Package
MOQ: 1 |

MAX3243IPWRG4 Ulas

The Texas Instruments MAX3243IPWRG4 is a 3-to-5.5 V multichannel RS-232 line driver and receiver rated for data rates up to 250 kbps, with plus or minus 15 kV human-body-model ESD protection in a 28-pin TSSOP package. The device integrates three RS-232 drivers and three receivers with AutoShutdown capability, allowing the supply current to fall to 1 uA when no valid signal is detected.

An RS-232 transceiver is an interface IC that converts between single-ended, bipolar logic-level signals used by host systems and the differential voltage signaling required by RS-232 equipment. Within the interface hierarchy, the MAX3243 combines a line driver, line receiver, voltage-level translation, and electrostatic-discharge protection into one low-voltage CMOS device. This integration reduces board area and component count while maintaining compatibility with powered-down portable and industrial equipment.

The MAX3243IPWRG4 operates from 3 V to 5.5 V, making it suitable for systems using either 3.3 V or 5 V power rails. Its 250 kbps maximum data rate supports standard serial links used for instrumentation, industrial control, point-of-sale equipment, and data acquisition. The 28-pin TSSOP package has a stated 0.65 mm terminal pitch and 5.30 mm body width, enabling compact surface-mount layouts where a larger package would be inconvenient.

AutoShutdown provides an important power-management advantage for portable and intermittently connected systems. When the receiver detects no valid RS-232 signal, the device can enter a shutdown state and reduce supply current to 1 uA. Resume timing and capacitor sizing should still be evaluated against the system communication protocol, particularly when the remote transmitter can remain connected but idle for long periods.

Typical uses include industrial serial controllers, laboratory interfaces, barcode scanners, security equipment, and embedded service ports. The three-driver, three-receiver arrangement works well for compact dual-ended links, while the protected low-voltage interface suits systems that need reliable translation between CMOS logic and RS-232 levels. Designers should account for the voltage levels and grounding requirements of the connected RS-232 equipment when evaluating signal integrity.

Place the device close to the connector and use short, appropriately terminated signal routes for the highest practical noise immunity. Follow the manufacturer datasheet for external charge-pump capacitors, driver output wiring, receiver input handling, and ESD layout. Verify that the power rail, logic levels, line-direction control, and operating temperature meet the complete system requirements before releasing the PCB.

This product record combines electrical specifications, package details, pin-location guidance, application fit, and qualified drop-in comparison information. It also highlights practical power-management and layout considerations so engineers can assess the MAX3243IPWRG4 against other RS-232 interface choices before committing to a board design.

Mga alternatibo na pwedeng ilagay na MAX3243IPWRG4 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok MAX3243IPWRG4 (parehas na form factor at footprint) — pagkakaiba sa ESD Protection, Maximum Data Rate.

Texas Instruments
ESD Protection: ±15 kV IEC ESD
Maximum Data Rate: 500 kbps
Ikabit sa MAX3243IPWRG4 →

MAX3243EIPWRG4

✅ Drop-In
Texas Instruments
📦 28-pin TSSOP
Multichannel RS-232 line driver/receiver · 3 V to 5.5 V · 500 kbps · 500 mV · ±15 kV IEC ESD · RS-232 · Multichannel full-duplex transceiver · 28-pin TSSOP

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX3243EPWRG4

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 28-pin TSSOP
E-grade option provides approximately -40 °C to 85 °C operation versus 0 °C to 70 °C for MAX3243IPWRG4, extending the lower limit by 40 °C and upper limit by 15 °C.

📋 Alternatibo na Reference (hindi sa katalogo)

MAX3243CPWRG4

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
Texas Instruments
📦 28-pin TSSOP
Multichannel RS-232 line driver/receiver · 3 V to 5.5 V · 250 kbps · ±15 kV HBM · 3 channels · 3 channels · 3/5 transceiver · RS-232

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX3243ECPWG4

✅ Drop-In
Texas Instruments
📦 28-pin TSSOP
Multichannel RS-232 line driver/receiver · 3 · 5 · 3 V to 5.5 V · 500 kbps · ±15 kV IEC ESD protection · Full duplex · 500 mV

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX3243EUPWRG4

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 28-pin TSSOP
EUPW provides an approximately -40 °C to 85 °C operating range, extending temperature coverage by 40 °C at the cold end and 15 °C at the hot end relative to MAX3243IPWRG4.

📋 Alternatibo na Reference (hindi sa katalogo)

MAX3243IPWRG4 Mga Spesipikasyon

Uri ng Interface RS-232 line driver and receiver
Number of Drivers 3
Number of Receivers 3
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
ESD Protection ±15 kV HBM
Shutdown Supply Current 1 uA
Process Technology CMOS
Device Type Multichannel transceiver
Package Type 28-pin TSSOP
Package Body Width 5.30 mm
Terminal Pitch 0.65 mm
Number of Terminals 28
Uri ng Pagpapasok Surface mount
Maximum Transmit Delay 150 ns
Hanay ng Temperature na Operasyon 0 °C to 70 °C

Gabay sa Pin Configuration ng MAX3243IPWRG4 5.30 mm

Pin configuration para sa MAX3243IPWRG4 (5.30 mm package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 5.30 mm package para sa MAX3243IPWRG4

Wala ng detalyadong pinout data na magagamit para sa MAX3243IPWRG4.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MAX3243IPWRG4 ay nararapat para sa 6 aplikasyons: Industrial Serial Control Interface, Point-of-Sale Terminal, Laboratory Instrument Connectivity, Embedded Service and Configuration Port, Barcode and Identification Equipment, Security and Surveillance Equipment.

🏭

Industrial Serial Control Interface

The MAX3243IPWRG4 fits industrial controller and data-acquisition equipment that converts CMOS logic into RS-232 signals. Its 3 V to 5.5 V operating range supports common embedded supply rails, while the 250 kbps rate is appropriate for configuration, logging, and supervisory links. The three-driver and three-receiver arrangement supports several channels without requiring separate transceiver packages. Its 1 uA shutdown current helps reduce standby consumption when the field equipment is connected intermittently.

🖥️

Point-of-Sale Terminal

The MAX3243IPWRG4 can serve the serial boundary in a point-of-sale terminal, receipt printer, customer display, or barcode-scanner interface. The 250 kbps maximum rate is more than sufficient for short transactional links, and the 3 V to 5.5 V supply range fits mixed-voltage embedded platforms. AutoShutdown supports lower standby power when a peripheral is disconnected. Designers should verify the remote device’s logic levels, connector wiring, and RS-232 signal polarity before deployment.

🔧

Laboratory Instrument Connectivity

The MAX3243IPWRG4 is appropriate for laboratory instruments that expose a legacy RS-232 configuration or measurement port to a modern controller. Its 250 kbps rate supports short-distance command and measurement traffic, while plus or minus 15 kV HBM protection improves robustness at accessible connector interfaces. The 28-pin TSSOP package conserves board space in multi-channel instruments. Charge-pump capacitors and transceiver routing should follow the manufacturer layout to preserve driver amplitude and noise performance.

📱

Embedded Service and Configuration Port

The MAX3243IPWRG4 can provide a service port for embedded equipment that needs a legacy RS-232 connection during installation, diagnostics, or firmware recovery. Its low 3 V operating threshold permits use with modern embedded processors, and the 1 uA AutoShutdown current helps isolate inactive ports. The 250 kbps rate is suitable for boot-loader messages and configuration scripts. Firmware should account for transceiver wake-up behavior and avoid assuming that data will be recognized before the interface becomes active.

🔒

Barcode and Identification Equipment

The MAX3243IPWRG4 is suitable for barcode readers, identification terminals, and access-control equipment that communicate through RS-232. The three transmit and three receive channels can support multiple short connections where the connected devices use compatible signaling. A maximum rate of 250 kbps handles command and scanned-data traffic without requiring a higher-bandwidth interface. The protected transceiver is useful near external connectors, while AutoShutdown reduces consumption when an accessory line is not in use.

🎥

Security and Surveillance Equipment

The MAX3243IPWRG4 can support RS-232 commissioning and control links in cameras, access-control panels, and other security equipment. Its plus or minus 15 kV HBM ESD rating adds protection at connector-facing circuitry, while the 3 V to 5.5 V range supports low-power embedded platforms. The 250 kbps rate is appropriate for command and status traffic rather than continuous high-bandwidth data. Secure installations should also use shielded cables, controlled grounding, and connector practices appropriate to the RS-232 environment.

What is the MAX3243IPWRG4?
The MAX3243IPWRG4 is a 3-to-5.5 V, three-driver and three-receiver RS-232 transceiver from Texas Instruments. According to the Texas Instruments MAX3243 datasheet, it supports data rates up to 250 kbps, includes plus or minus 15 kV HBM ESD protection, and uses AutoShutdown to reduce supply current to 1 uA when no valid signal is present. It is packaged in a 28-pin TSSOP for compact surface-mount industrial and embedded systems.
What is the operating voltage of MAX3243IPWRG4?
The MAX3243IPWRG4 operates from 3 V to 5.5 V. According to the Texas Instruments MAX3243 product page and datasheet, this range supports both 3.3 V and 5 V systems. The low-voltage CMOS implementation is useful for modern embedded controllers whose I/O supply is below the traditional 5 V RS-232 transceiver operating range. The connected logic supply must still meet the device's input and output thresholds.
How fast can MAX3243IPWRG4 transmit data?
The MAX3243IPWRG4 supports a maximum data rate of 250 kbps. According to the Texas Instruments MAX3243 datasheet, it combines three RS-232 drivers and three receivers in one 28-pin TSSOP package. This rate is suitable for conventional point-to-point serial links, including industrial controllers, test equipment, and embedded service interfaces. Actual throughput also depends on cable length, baud-rate tolerance, framing, and the performance of the connected equipment.
Where can I download the MAX3243IPWRG4 datasheet PDF?
The official MAX3243IPWRG4 datasheet PDF is available from the Texas Instruments document link at https://www.ti.com/lit/ds/symlink/max3243.pdf. The datasheet is the primary document for pin assignments, recommended external capacitors, electrical characteristics, AutoShutdown behavior, and RS-232 driver and receiver application guidance. The manufacturer product page at https://www.ti.com/product/MAX3243 provides ordering information, device variants, and supporting technical documentation.
Where can I find the MAX3243IPWRG4 pinout?
Use the pin-description and package-outline drawings in the Texas Instruments MAX3243 datasheet to locate the MAX3243IPWRG4 pins and the exposed footprint geometry. The device is a 28-pin TSSOP with a 0.65 mm terminal pitch. Texas Instruments also provides a pinout and comparison tool on its MAX3243 product page. Confirm the exact PW package drawing and all supply, ground, charge-pump, receiver, driver, and enable connections before laying out the PCB.
What can replace the MAX3243IPWRG4?
A direct replacement must use the same 28-pin TSSOP footprint and preserve the RS-232 signal, power, shutdown, and charge-pump connections. MAX3243EIPWRG4 is the closest same-manufacturer option because it retains the 3 V to 5.5 V supply range and 250 kbps class of operation while extending the temperature grade. Other MAX3243C, MAX3243E, and MAX3243EU package options should be checked against temperature, ESD, and shutdown requirements before substitution.
Is MAX3243IPWRG4 the same as MAX3243EIPWRG4?
The MAX3243EIPWRG4 is a close same-family alternative, but the temperature grade is the principal engineering distinction. The MAX3243IPWRG4 is listed with a 0 °C to 70 °C range, while the E-grade MAX3243EIPWRG4 extends the lower limit to approximately -40 °C and the upper limit to 85 °C. Both use the 28-pin TSSOP format and support the same 3 V to 5.5 V, 250 kbps RS-232 function. Verify the exact pinout and shutdown timing before replacing the part.
Is MAX3243IPWRG4 suitable for industrial equipment?
The MAX3243IPWRG4 is suitable for commercial-temperature embedded and industrial interface equipment operating within its stated 0 °C to 70 °C range. Its 250 kbps data rate, 1 uA shutdown current, and plus or minus 15 kV HBM protection suit serial control, logging, and configuration ports. Equipment expected to operate below 0 °C or above 70 °C should select a wider-temperature MAX3243 grade rather than relying on the standard industrial suffix.
How does MAX3243IPWRG4 reduce power consumption?
The MAX3243IPWRG4 uses AutoShutdown to lower supply current to 1 uA when it does not detect a valid RS-232 signal. According to the Texas Instruments MAX3243 datasheet, this behavior is useful in portable, battery-powered, and intermittently connected equipment. The system should allow adequate wake-up time before communicating and should account for charge-pump capacitor discharge and logic states during shutdown. This feature helps reduce standby power without adding a separate transceiver.
What is the best Texas Instruments equivalent for MAX3243IPWRG4?
The MAX3243EIPWRG4 is the best same-manufacturer replacement for a standard-temperature MAX3243IPWRG4 when a wider-temperature 28-pin TSSOP option is required. It retains the 3 V to 5.5 V operating range, three-driver and three-receiver configuration, and 250 kbps RS-232 application class. According to Texas Instruments ordering information, the E grade changes the temperature qualification rather than the core interface function, making it a practical choice for industrial environments extending below 0 °C.
What are the key specifications of MAX3243IPWRG4 that engineers should know?
The key specifications are a 3 V to 5.5 V supply range, three RS-232 drivers and three receivers, a maximum data rate of 250 kbps, plus or minus 15 kV HBM ESD protection, and 1 uA shutdown supply current. The Texas Instruments MAX3243 datasheet also identifies the device as a CMOS interface IC in a 28-pin TSSOP package. These figures define its suitability for low-voltage embedded systems, point-to-point serial links, and equipment requiring automatic standby behavior.
Does MAX3243IPWRG4 need external charge-pump capacitors?
The MAX3243IPWR3-family implementation requires the external components specified in the Texas Instruments MAX3243 datasheet for operation. Follow the manufacturer’s recommended capacitor values, voltage ratings, placement, and charge-pump layout rather than treating these parts as interchangeable with arbitrary RS-232 transceivers. Incorrect capacitance can affect the generated RS-232 voltage, power consumption, startup timing, and driver amplitude. Keep the charge-pump traces short and verify the final arrangement with the recommended test conditions.
Where can I buy MAX3243IPWRG4 online?
Use the Request a Quote form on this page to request MAX3243IPWRG4 availability, lead time, and a quotation for the required quantity. A request should identify the 28-pin TSSOP package and the exact MAX3243IPWRG4 manufacturer part number to avoid confusion with other MAX3243 temperature grades or package variants. The Texas Instruments product page also provides approved ordering options and lifecycle information, while XAIPART can confirm the current commercial terms for the requested quantity.
What is the lead time and stock status of MAX3243IPWRG4?
Use the Request a Quote form on this page to confirm current stock, factory lead time, and minimum order quantity for MAX3243IPWRG4. The Texas Instruments product page provides the authoritative ordering and lifecycle context, including available device variants. Because distributor inventory can change quickly, a specific quantity and required delivery date should accompany the request. Do not substitute a different MAX3243 grade unless its temperature range, package, and ESD requirements have been reviewed.
What is the price of MAX3243IPWRG4?
The current price and quantity pricing for MAX3243IPWRG4 are handled through the Request a Quote form on this page. Include the required order quantity, package configuration, and target delivery date so the quotation reflects the correct 28-pin TSSOP variant. The Texas Instruments product page can be used to confirm the exact MPN and ordering options. Pricing should not be inferred from another MAX3243 grade because temperature grade and order quantity can change commercial terms.
MAX3243IPWRG4 versus MAX3243EIPWRG4: which is better?
Choose the MAX3243IPWRG4 for equipment constrained to its listed 0 °C to 70 °C operating range and choose the MAX3243EIPWRG4 when the design must operate down to approximately -40 °C or up to 85 °C. Both devices use the 28-pin TSSOP format and provide the 3 V to 5.5 V, 250 kbps multichannel RS-232 interface with ESD protection. Confirm pin functions, external capacitance, and qualification requirements against the Texas Instruments datasheet before treating either grade as a replacement.

Impormasyon ng Talumpati sa Engineering for MAX3243IPWRG4 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the MAX3243IPWRG4 for compact embedded equipment that needs a 3 V to 5.5 V RS-232 interface, three drivers and three receivers, and a maximum data rate of 250 kbps. Its 28-pin TSSOP package and 1 uA AutoShutdown current are useful in portable and intermittently connected products operating from 0 °C to 70 °C. Choose the MAX3243EIPWRG4 when the same basic interface is required across a wider temperature range. The MAX3243ECPWG4 is another E-grade option for boards requiring enhanced ESD positioning, while the MAX3243CPWRG4 fits commercial-temperature requirements without expanding the thermal range. The MAX3243EPWRG4 and MAX3243EUPWRG4 support extended-temperature environments but should be selected only after their exact grade data, pin functions, and ordering codes are checked. For every option, confirm the PW package dimensions, external charge-pump capacitors, shutdown timing, and connector-level electrical requirements before substituting it for the MAX3243IPWRG4.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MAX3243EIPWRG4 MAX3243EPWRG4 MAX3243CPWRG4 MAX3243ECPWG4 MAX3243EUPWRG4
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP
Interface Type RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V
Maximum Data Rate 250 kbps 250 kbps 250 kbps 250 kbps 250 kbps 250 kbps
Driver and Receiver Count 3 drivers and 3 receivers 3 drivers and 3 receivers 3 drivers and 3 receivers 3 drivers and 3 receivers 3 drivers and 3 receivers 3 drivers and 3 receivers
Operating Temperature Range 0 °C to 70 °C Approximately -40 °C to 85 °C Approximately -40 °C to 85 °C Approximately 0 °C to 70 °C Approximately -40 °C to 85 °C Approximately -40 °C to 85 °C

Pangunahing mga Pagkakaiba

  • Lower-voltage RS-232 interface (kumpara saMAX3243EIPWRG4)
  • Commercial-temperature grade for controlled installations (kumpara saMAX3243EIPWRG4)
  • Integrated low-power shutdown behavior (kumpara saMAX3243CPWRG4)

Talaan ng Disenyo

Place the MAX3243IPWRG4 close to the RS-232 connector and route driver and receiver lines away from switching nodes and fast digital clocks. Keep the charge-pump capacitor connections short and follow the Texas Instruments MAX3243 datasheet layout and capacitor values exactly. The interface is designed for 250 kbps operation, but long unprotected cable runs can introduce noise and reflections that are not problems at lower logic speeds, so connector-side grounding and cable shielding must be considered.

Confirm that the 3 V to 5.5 V supply remains within the supported range during startup, shutdown, and remote-power events. The 1 uA AutoShutdown current is a standby figure, not the operating current, so calculate the average power from normal load current, transceiver activity, and shutdown duration. If the connected RS-232 source remains active, validate its effect on wake-up timing and the system’s ability to distinguish an inactive port from a disconnected one.

Do not treat every MAX3243 suffix as electrically identical to MAX3243IPWRG4. Temperature grade, ESD behavior, package dimensions, and ordering codes can differ between E, C, and EU variants. Before substitution, compare the 28-pin PW package drawing, all pin names, supply range, charge-pump capacitor requirements, shutdown behavior, and temperature limits. Also verify that a lead-free ordering code does not imply a different electrical grade merely because the suffix characters differ.

Use the manufacturer’s specified charge-pump capacitors and observe the recommended placement because RS-232 driver amplitude depends on the voltage generated by the charge-pump network. Keep these traces short and return currents controlled to reduce radiated noise. For remote cables, use appropriate shielding and ground references; a logic-level UART trace and an RS-232 line are electrically different interfaces and should not be treated as interchangeable connections.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The MAX3243 datasheet identifies plus or minus 15 kV HBM ESD protection, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified. AEC-Q100 qualification is not applicable to this RS-232 interface device.

Data napatotohanan sa: 2026-11-09 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MAX3243IPWRG4 datasheet MAX3243IPWRG4 pinout MAX3243IPWRG4 datasheet pdf MAX3243IPWRG4 equivalent MAX3243IPWRG4 replacement MAX3243IPWRG4 vs MAX3243EIPWRG4 MAX3243IPWRG4 28-TSSOP MAX3243IPWRG4 250kbps RS-232 MAX3243IPWRG4 3V to 5.5V MAX3243IPWRG4 industrial interface Texas Instruments MAX3243IPWRG4 MAX3243IPWRG4 price MAX3243IPWRG4 stock MAX3243IPWRG4 cross reference MAX3243IPWRG4 application circuit

Mga kaugnay na Mga Komponente at mga Tuntunin

Texas Instruments MAX3243IPWRG4 MAX3243EIPWRG4 MAX3243EPWRG4 MAX3243CPWRG4 MAX3243ECPWG4 MAX3243EUPWRG4 RS-232 transceiver line driver line receiver interface IC CMOS AutoShutdown 250 kbps 3 V to 5.5 V plus or minus 15 kV HBM ESD protection 28-pin TSSOP TSSOP package family surface-mount package industrial equipment point-of-sale terminal laboratory instrument barcode scanner security equipment
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ