Analog Devices

MAX350CAP+ - Dual 4:1 Analog Multiplexer | Analog Devices

MPN: MAX350CAP+ ✓ Nakahanda
±2.7 V to ±8 V Vdss 100 ohms Rds(on) 20-pin SSOP Package
MOQ: 1 |

MAX350CAP+ Ulas

The Analog Devices MAX350CAP+ is a serially controlled, low-voltage dual 4:1 analog multiplexer with two independent 4:1 switch circuits, a maximum on-resistance of 100 ohms, and a 20-pin SSOP package. The device supports bidirectional signal conduction and operates from single or dual power supplies, making it suitable for routing low-voltage analog signals in test, measurement, communication, and control systems.

An analog multiplexer is an interface IC that connects multiple signal sources to a shared destination while allowing a controller to select the active path. The MAX350 family belongs to the broader switch and multiplexer hierarchy, where its 4:1 configurations provide four inputs per circuit and reduce the number of external routing connections required in a PCB.

The MAX350CAP+ provides two 4:1 circuits in one package, with maximum on-resistance of 100 ohms. On-resistance matching between switches is specified at 16 ohms maximum, while variation across the specified signal range is limited to 10 ohms maximum. The low-voltage architecture supports dual supplies from ±2.7 V to ±8 V or a single supply from +2 V to +16 V.

Because these are CMOS analog switches, the device conducts equally well in either direction. The serial control interface allows an external controller to select among the four channels in each circuit, reducing the number of parallel logic connections compared with a mechanically switched multiplexer. Charge injection of 1 pC and channel capacitance of 2 pF are useful considerations when precision transient or bandwidth behavior matters.

Typical uses include signal-routing modules, programmable test equipment, industrial control interfaces, data-acquisition systems, and communication equipment. The dual 4:1 arrangement is especially useful where two independent groups of analog inputs must be selected under software control while maintaining a compact 20-pin SSOP footprint.

When assigning PCB tracks, keep protected or high-impedance signal paths short and use the pin-description table in the manufacturer datasheet. Check the actual signal amplitude, bandwidth, supply arrangement, and control-logic levels against the electrical characteristics before treating the 100-ohm maximum on-resistance as acceptable insertion loss.

This page combines manufacturer specifications, sourcing information, compatible family options, and practical interface-design guidance. It also distinguishes verified drop-in options from related MAX349 and MAX350 devices so engineers can select by channel configuration, package, pinout, and supply requirements rather than by multiplexer function alone.

Mga alternatibo na pwedeng ilagay na MAX350CAP+ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok MAX350CAP+ (parehas na form factor at footprint) — pagkakaiba sa Maximum On-Resistance, Package.

Analog Devices
Maximum On-Resistance: 100 ohm
Package: 18-pin wide SOIC (WSOIC-18)
Ikabit sa MAX350CAP+ →

MAX350EWN+

✅ Drop-In
Analog Devices
📦 SSOP-20
Dual 4:1 multiplexer, 2 circuits · Serial · 2.7 V to 16 V · 100 ohm · 16 ohm maximum · 10 ohm maximum · Bidirectional · CMOS

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX350CAP

✅ Drop-In
📦 SSOP-20
Same MAX350 dual 4:1 configuration and 20-pin SSOP package with a 100-ohm maximum on-resistance; the MAX350CAP+ ordering designation is used for the current production option.

📋 Alternatibo na Reference (hindi sa katalogo)

MAX350CAP+ Mga Spesipikasyon

Product Type Serially controlled dual 4:1 analog multiplexer
Number of Circuits 2 circuits
Multiplexer Configuration Dual 4:1
Maximum On-Resistance 100 ohms
On-Resistance Matching Between Switches 16 ohms maximum
On-Resistance Flatness Over Signal Range 10 ohms maximum
Signal Conduction Direction Bidirectional
Dual Supply Voltage Range ±2.7 V to ±8 V
Single Supply Voltage Range +2 V to +16 V
Channel Capacitance 2 pF
Charge Injection 1 pC
Packhaging 20-pin SSOP
Control Interface Serial
Technology CMOS analog switch
Manufacturer Lifecycle Status Production

Gabay sa Pin Configuration ng MAX350CAP+ 20-pin ssop

Pin configuration para sa MAX350CAP+ (20-pin ssop package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 20-pin ssop package para sa MAX350CAP+

Wala ng detalyadong pinout data na magagamit para sa MAX350CAP+.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MAX350CAP+ ay nararapat para sa 6 aplikasyons: Programmable Test-Signal Routing, Data-Acquisition Signal Multiplexing, Communication Interface Routing, Industrial Control Signal Selection, Medical and Sensor Signal Routing, Programmable Instrumentation and Calibration.

🔧

Programmable Test-Signal Routing

The MAX350CAP+ fits programmable test modules that must route several low-level analog sources to a common measurement path. Two independent 4:1 sections allow one group of signals to be selected while another group is handled simultaneously, reducing the number of external relays and routing components. Its maximum on-resistance of 100 ohms is suitable when the source impedance is low and cable or fixture capacitance dominates the bandwidth limitation. Serial control simplifies microcontroller or FPGA-based selection, while bidirectional conduction supports loopback and two-ended instrumentation. The 20-pin SSOP package also keeps the routing section compact, although the final input bandwidth and settling behavior should be verified with the complete test fixture.

📊

Data-Acquisition Signal Multiplexing

The MAX350CAP+ can select among four analog inputs in each of two acquisition channels, allowing multiple sensors or conditioned signals to share ADC front-end circuitry. The dual 4:1 arrangement is useful when two measurement groups must be sampled without duplicating complete analog routing paths. Its 2 pF channel capacitance and 1 pC charge injection are important when the multiplexer sits close to a high-impedance sensor amplifier. The 100-ohm maximum on-resistance should be included in the source-impedance calculation because amplifier bias current can create an additional offset. Serial control reduces parallel control wiring, and the 20-pin SSOP package is practical for compact multi-channel measurement boards.

🌐

Communication Interface Routing

The MAX350CAP+ is suitable for low-voltage communication boards that require software-controlled routing among several analog or mixed-signal paths. Bidirectional conduction allows the same switch network to support transmit, receive, or loopback arrangements, and the dual 4:1 configuration provides two independent routing sections within one package. Its maximum on-resistance of 100 ohms can be suitable for low-impedance sensor lines or baseband paths, but it must be checked against line loading and attenuation requirements. Serial addressing minimizes GPIO usage compared with discrete control logic. For higher-speed signals, validate channel capacitance, propagation behavior, and external buffering rather than assuming generic multiplexer functionality guarantees the target bandwidth.

🏭

Industrial Control Signal Selection

The MAX350CAP+ can route four control or measurement signals into each of two shared paths in an industrial controller. This arrangement helps designers consolidate field-interface wiring while retaining independent selection for two equipment subsystems. The device supports single-supply operation from +2 V to +16 V as well as dual supplies from ±2.7 V to ±8 V, giving flexibility when the board mixes positive, negative, and ground-referenced signals. Serial control supports deterministic configuration from a microcontroller or embedded controller. Because the on-resistance can reach 100 ohms, verify drive strength at the source and sensitivity at the receiving input, and provide appropriate protection for external industrial wiring.

💊

Medical and Sensor Signal Routing

The MAX350CAP+ can provide compact analog routing for low-level sensor interfaces where multiple conditioned inputs must be selected before amplification. The dual 4:1 organization allows two independent sensor groups to share a limited set of downstream analog channels, while serial control makes the selection sequence easy to coordinate with a sensor controller. Its 2 pF channel capacitance and 1 pC charge injection are relevant to high-impedance front ends, but the complete amplifier topology must be evaluated for offset and transient error. The MAX350CAP+ is not designated as an AEC-Q100 automotive part, and medical suitability must be established at the system level through applicable validation and regulatory procedures.

📡

Programmable Instrumentation and Calibration

The MAX350CAP+ supports compact calibration and instrumentation systems by allowing a controller to select among several reference or stimulus paths. Each 4:1 circuit can present one of four sources to a common destination, making it useful for gain-setting networks, calibration tables, and configurable front ends. Bidirectional conduction also permits source-and-measurement sharing, and the specified 16-ohm maximum matching between switches helps limit channel-to-channel calibration error. The serial control interface reduces the number of discrete select lines. For precision measurements, include the maximum 100-ohm on-resistance, source impedance, injected charge, and switch capacitance in the error budget, and use the manufacturer characterization data for the actual signal range.

Buod ng mga Inirekomendang Produkto

MAX350CAP+ Analog Devices Ginagamit sa: Programmable Test-Signal Routing, Data-Acquisition Signal Multiplexing, Communication Interface Routing, Industrial Control Signal Selection, Medical and Sensor Signal Routing, Programmable Instrumentation and Calibration MAX349EAP Related single 8-channel routing function Ginagamit sa: Programmable Test-Signal Routing, Data-Acquisition Signal Multiplexing, Industrial Control Signal Selection MAX350EWN+ Analog Devices Ginagamit sa: Communication Interface Routing, Programmable Instrumentation and Calibration MAX350CAP Related same-package family member Ginagamit sa: Medical and Sensor Signal Routing
What is the MAX350CAP+ used for?
The MAX350CAP+ is a serially controlled dual 4:1 analog multiplexer used to route one of four analog signals to a shared output in each of two independent circuits. According to the Analog Devices manufacturer datasheet, the device supports bidirectional conduction, a maximum on-resistance of 100 ohms, and low-voltage operation, making it suitable for programmable test, measurement, communication, and industrial control systems.
How many channels and circuits does the MAX350CAP+ have?
The MAX350CAP+ contains two independent 4:1 multiplexer circuits, providing eight switched signal inputs in total. The Analog Devices manufacturer datasheet identifies the part as an 8-channel or dual 4:-channel device. Each circuit can select one of four inputs through the serial control interface, allowing two groups of analog signals to be routed independently in a single 20-pin SSOP package.
What is the on-resistance of the MAX350CAP+?
The MAX350CAP+ has a maximum on-resistance of 100 ohms. The Analog Devices manufacturer datasheet also specifies on-resistance matching between switches at 16 ohms maximum and on-resistance flatness at 10 ohms maximum over the specified signal range. These figures should be compared with the source impedance, load impedance, signal bandwidth, and allowable insertion loss of the selected channel.
What supply voltages does the MAX350CAP+ operate from?
The MAX350CAP+ operates from either ±2.7 V to ±8 V dual supplies or +2 V to +16 V as a single supply. According to the Analog Devices manufacturer datasheet, the device is a low-voltage CMOS analog switch with flexible supply arrangements. Use the dual-supply configuration when the routed signal must pass through zero volts, and confirm signal limits and control-logic compatibility against the electrical characteristics.
Does the MAX350CAP+ conduct signals in both directions?
Yes, the MAX350CAP+ conducts signals equally well in either direction. This bidirectional behavior is stated in the Analog Devices manufacturer datasheet and distinguishes the device from a one-way multiplexer. Bidirectional operation is useful in communication links, loopback tests, programmable impedance networks, and systems where either endpoint may initiate signal transfer.
Where can I download the MAX350CAP+ datasheet PDF?
The official MAX350 product page at Analog Devices provides the manufacturer datasheet and supporting documentation for the MAX350 family. The MAX350CAP+ is covered by the family data sheet and product-selection table. Use the manufacturer link on this page for the authoritative pin descriptions, electrical characteristics, ordering information, and document revision details.
Where can I find the MAX350CAP+ pinout?
The MAX350CAP+ pinout is defined in the pin-description table and package drawing in the Analog Devices manufacturer datasheet. The device uses a 20-pin SSOP package with two 4:1 switching circuits and serial control inputs. Use the package drawing to assign pins because the multiplexer's control inputs, common terminals, and selectable channels must be connected exactly as specified.
Is the MAX350CAP+ pin compatible with the MAX350CAP?
The MAX350CAP+ and MAX350CAP use the same 20-pin SSOP format and are identified as members of the MAX350 dual 4:1 family, so their physical interface should be checked against the family pin drawing. The exact electrical and qualification differences associated with the + designation are not stated in the available product summaries. Verify temperature grade, lifecycle status, and ordering information before approving the older MAX350CAP for a new design.
MAX350CAP+ vs MAX349EAP: which multiplexer is the better replacement?
The MAX350CAP+ is the better choice when the PCB requires two independent 4:1 circuits, while the MAX349EAP belongs to the 8-channel MAX349 family and therefore has a different multiplexing organization. The Analog Devices manufacturer datasheet identifies MAX350 as a dual 4:1 device. Although both families perform analog routing, a substitution requires verification of the pin configuration, channel count, control logic, and package connections.
When should I choose the MAX350CAP+ instead of the MAX349 family?
Choose the MAX350CAP+ when the design needs two separate 4:1 routing sections, bidirectional conduction, and low-voltage operation in a 20-pin SSOP package. Select the MAX349 family only when its 8-channel arrangement matches the PCB and control protocol. The key selection criterion is the physical and logical pin interface, not merely whether both devices are described as low-voltage multiplexers.
What is the best drop-in replacement for the MAX350CAP+?
The MAX350CAP+ itself is the production-qualified ordering option identified for this 20-pin SSOP dual 4:1 device. The MAX350EWN+ is a closely related same-family part that may suit designs requiring a different ordering suffix, but its temperature and product-status details must be checked before substitution. No cross-manufacturer part can be treated as a confirmed drop-in replacement from the available cross-reference information.
Can MAX350EWN+ replace MAX350CAP+?
The MAX350EWN+ is a related MAX350-family option in the same 20-pin SSOP format, but it should be treated as a conditional replacement rather than an automatic drop-in. Confirm the pin assignments, serial-control protocol, electrical ratings, temperature grade, and lifecycle requirements against the manufacturer datasheet. The MAX350CAP+ remains preferable when its production status and qualification match the target application exactly.
Where can I buy the MAX350CAP+ online?
Use the Request a Quote form on this page to request MAX350CAP+ availability, current unit pricing, minimum order quantity, and lead time. The form allows the request to be matched to the exact MAX350CAP+ ordering code and 20-pin SSOP configuration. Stock status and lead time can change, so request a written quotation for the quantity and delivery schedule required by the production build.
What is the price of the MAX350CAP+?
The current MAX350CAP+ price is best obtained through the Request a Quote form on this page. Enter the required quantity, package preference, target delivery date, and any production-volume information so the quotation reflects the exact ordering code. Because distributor inventory and commercial terms can change quickly, the form provides a more reliable response than a static price statement.
Is the MAX350CAP+ in stock and what is its lead time?
Current MAX350CAP+ inventory and lead time should be confirmed through the Request a Quote form on this page. Provide the required order quantity and target date so procurement can identify the production status and available supply for the exact MPN. Digital distributors may display changing stock indicators, but those indicators do not replace a quantity-specific quotation or delivery commitment.
What are the key specifications engineers should know about the MAX350CAP+?
The key MAX350CAP+ specifications are its dual 4:1 architecture, two independent switching circuits, bidirectional conduction, 100-ohm maximum on-resistance, 16-ohm maximum switch-to-switch matching, and 10-ohm maximum resistance flatness. According to the Analog Devices manufacturer datasheet, it accepts dual supplies from ±2.7 V to ±8 V or a single supply from +2 V to +16 V and is packaged in 20-pin SSOP.

Impormasyon ng Talumpati sa Engineering for MAX350CAP+ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the MAX350CAP+ for a new design that requires two independent 4:1 analog-routing sections, serial control, bidirectional conduction, and operation from +2 V to +16 V single supply or ±2.7 V to ±8 V dual supply. Its 100-ohm maximum on-resistance, 16-ohm maximum switch matching, and 2 pF channel capacitance make it appropriate for many low-level routing applications, provided the complete source and receiver impedances are included in the signal-integrity analysis. Consider MAX350EWN+ when its ordering suffix and qualification details match a specific sourcing or lifecycle requirement after checking the family datasheet. The MAX350CAP is a closely related package-compatible member, but the current MAX350CAP+ designation is preferable when it matches the required production status. Do not substitute the MAX349EAP solely because it is also a low-voltage multiplexer; its 8-channel organization differs from the dual 4:1 architecture and requires a separate pin and control-protocol review.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MAX350EWN+ MAX350CAP
Package 20-pin SSOP 20-pin SSOP 20-pin SSOP
Brand Analog Devices Analog Devices Analog Devices
Multiplexer Configuration Dual 4:1 Dual 4:1 Dual 4:1
Maximum On-Resistance 100 ohms 100 ohms maximum for the MAX350 family 100 ohms
On-Resistance Matching 16 ohms maximum 16 ohms maximum for the MAX350 family 16 ohms maximum
On-Resistance Flatness 10 ohms maximum 10 ohms maximum for the MAX350 family 10 ohms maximum
Signal Conduction Bidirectional Bidirectional Bidirectional
Dual Supply Range ±2.7 V to ±8 V ±2.7 V to ±8 V ±2.7 V to ±8 V
Single Supply Range +2 V to +16 V +2 V to +16 V +2 V to +16 V
Channel Capacitance 2 pF 2 pF 2 pF
Charge Injection 1 pC 1 pC 1 pC
Control Interface Serial Serial Serial

Pangunahing mga Pagkakaiba

  • Two independent 4:1 routing sections in one package (kumpara saMAX349EAP)
  • Low maximum on-resistance with controlled matching (kumpara saMAX349EAP)
  • Bidirectional routing in a compact interface package (kumpara saMAX349EAP)

Talaan ng Disenyo

Include the switch's maximum 100-ohm on-resistance, 2 pF channel capacitance, and 1 pC charge injection in the receiver error budget. At high source impedance, the 100-ohm contribution can shift amplifier bias and introduce gain error, while charge injection creates a transient whenever the serial selection changes. Place the MAX350CAP+ near the amplifier input when trace capacitance and switching transients are significant, and use the manufacturer pin-description table when assigning the common and selectable terminals.

Decouple each supply rail close to the MAX350CAP+ with low-inductance ceramic and bulk capacitance selected for the board's supply impedance and switching environment. Keep the analog ground return path continuous and connect it according to the manufacturer package and layout guidance. The device supports single and dual supplies, so do not assume that a grounded common node is electrically interchangeable with a mid-supply reference. Confirm the actual signal range, control thresholds, and absolute voltage limits for the selected supply arrangement.

Route each selected analog channel with a geometry that minimizes coupling to adjacent high-impedance inputs and digital control traces. Maintain short connections between the multiplexer, source, and destination devices, and avoid long parallel runs beneath serial-control nets. Because the device is available in a 20-pin SSOP package, verify courtyard clearance, soldering profile, and exposed lead accessibility during board assembly. Do not infer the complete pin assignment from circuit position; use the pin-description table in the manufacturer datasheet.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The manufacturer product page identifies MAX350 as a production device. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the applicable product documentation.

Data napatotohanan sa: 2026-11-18 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MAX350CAP+ datasheet MAX350CAP+ datasheet pdf MAX350CAP+ pinout MAX350CAP+ equivalent MAX350CAP+ replacement MAX350CAP+ cross reference MAX350CAP+ price MAX350CAP+ stock Analog Devices MAX350CAP+ MAX350CAP+ vs MAX349EAP MAX350 dual 4:1 multiplexer MAX350CAP+ application circuit

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices MAX350CAP+ MAX350CAP MAX350EWN+ MAX349EAP MAX350 MAX349 dual 4:1 analog multiplexer analog multiplexer analog switch interface IC CMOS analog switch serial control bidirectional conduction on-resistance charge injection channel capacitance SSOP-20 20-pin SSOP surface mount signal routing data acquisition programmable test equipment industrial control
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ