Analog Devices

MAX368EPN+ - 8:1 Fault-Protected Mux | Analog Devices

MPN: MAX368EPN+ ✗ Tapus ng Buhay
1.8 kOhm Rds(on) 18-pin PDIP Package
MOQ: 1 |

MAX368EPN+ Ulas

The Analog Devices MAX368EPN+ is an 8:1 single-ended analog multiplexer with a 1.8 kOhm on-resistance, fault-protected operation, and latch capability in an 18-pin PDIP package. It routes one selected input to a common output for industrial and telecommunications signal-selection systems. The device is identified as obsolete, so engineers should confirm availability and lifecycle requirements before beginning a new design.

An analog multiplexer is a semiconductor switch that connects one of several input terminals to a shared output. It belongs to the hierarchy of analog switch, multiplexer or demultiplexer, interface IC, and semiconductor. The MAX368EPN+ implements an 8:1 arrangement, allowing eight source signals to be presented to one downstream circuit without requiring a separate physical route for every signal.

The key stated characteristics include an 8:1 circuit configuration, 1.8 kOhm on-resistance, single-ended signal routing, and an 18-pin PDIP package. Its fault-protected analog multiplexer architecture and latch function are intended to support controlled signal selection in demanding equipment. Unlike a mechanically switched relay matrix, the MAX368EPN+ performs routing electronically through semiconductor switches.

The MAX368EPN+ is implemented as an integrated analog interface device rather than a power regulator or digital logic component. Its through-hole PDIP package supports conventional PCB insertion and socketed prototyping. The on-resistance specification is the principal quantified electrical characteristic identified for this exact MPN; detailed limits for supply voltage, channel leakage, bandwidth, switching time, and logic thresholds are not stated in the product records and should be taken from the manufacturer datasheet before design release.

Typical uses include industrial measurement and control systems, telecommunications equipment, and other analog signal paths where eight inputs must be routed to a common processing channel. The fault-protection and latch characteristics can be valuable in systems that need controlled behavior during input faults or transitions. Board-level design must still account for source impedance, settling behavior, injected noise, and the voltage range allowed for each switched node.

For a new PCB, use the 18-pin PDIP footprint and verify every signal and supply connection against the manufacturer pin-description table. Preserve adequate routing separation between high-impedance sources and the multiplexer output, provide suitable return paths, and validate the complete signal chain across temperature. Because this exact device is obsolete, a lifecycle-approved redesign should be selected before production commitment.

This page consolidates the exact MAX368EPN+ catalog identity, obsolete lifecycle status, package information, known multiplexing characteristics, practical application guidance, and constrained drop-in alternatives. It also separates confirmed facts from specifications that must be checked in the manufacturer datasheet, helping engineers make a more reliable sourcing and redesign decision.

Mga alternatibo na pwedeng ilagay na MAX368EPN+ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok MAX368EPN+ (parehas na form factor at footprint) — pagkakaiba sa Mounting Type, Package, Temperature Grade.

Analog Devices
Mounting Type: Through Hole
Package: 18-PDIP (0.300 in, 7.62 mm)
Temperature Grade: C (commercial)
Ikabit sa MAX368EPN+ →

MAX368CPN+

✅ Drop-In
Analog Devices
📦 18-pin PDIP
Fault-protected analog multiplexer with latch · 8-channel (8:1) · 1.8 kOhm · Up to +/-35 V · 1.5 us · 1 us · Break-before-make · TTL and CMOS

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX368EJN

✅ Drop-In
📦 18-pin PDIP
Same 18-pin PDIP and 8:1 multiplexer topology, but the ordering suffix changes the temperature grade and some electrical characteristics differ by an unquantified amount.

📋 Alternatibo na Reference (hindi sa katalogo)

MAX368CPE+

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 18-pin PDIP
Same 8:1 topology and confirmed 1.8 kOhm on-resistance class, with 0% difference in topology and rating; commercial temperature suffix differs.

📋 Alternatibo na Reference (hindi sa katalogo)

MAX368EPE+

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 18-pin PDIP
Same 8:1 topology and confirmed 1.8 kOhm on-resistance class, with 0% difference in topology and rating; the E suffix denotes a different grade.

📋 Alternatibo na Reference (hindi sa katalogo)

MAX368CJN+

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 18-pin PDIP
Same 8:1 topology and confirmed 1.8 kOhm on-resistance class, with 0% difference in topology and rating; the CJ suffix denotes a different grade.

📋 Alternatibo na Reference (hindi sa katalogo)

MAX368EPN+ Mga Spesipikasyon

Multiplexer Configuration 8:1
Number of Circuits 1 circuit
On-Resistance 1.8 kOhm
Signal Configuration Single-ended
Device Type Fault-protected analog multiplexer with latch
Packhaging 18-pin PDIP
Package Code DIP
Uri ng Pagpapasok Through-hole
Number of Terminals 18 terminals
Package Width 0.300 inch (7.62 mm)
Temperature Grade Industrial
Katayuan ng Lifecycle Obsolete

Gabay sa Pin Configuration ng MAX368EPN+ 0.300 inch (7.62 mm)

Pin configuration para sa MAX368EPN+ (0.300 inch (7.62 mm) package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 0.300 inch (7.62 mm) package para sa MAX368EPN+

Wala ng detalyadong pinout data na magagamit para sa MAX368EPN+.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MAX368EPN+ ay nararapat para sa 6 aplikasyons: Industrial Measurement and Control, Telecommunications Signal Routing, Analog Sensor Interface, Test and Measurement Systems, Data Acquisition Modules, Legacy Control-System Service.

🏭

Industrial Measurement and Control

The MAX368EPN+ fits an industrial measurement system in which eight analog inputs share a common signal-conditioning path. Its 8:1 single-ended architecture reduces the number of physical connections required between field sensors and a controller or converter. The stated 1.8 kOhm on-resistance provides a known basis for evaluating source loading, while the fault-protected latch behavior supports controlled channel states. Because the component is obsolete, use it in an existing design or obtain explicit lifecycle approval before creating new production hardware.

🌐

Telecommunications Signal Routing

The MAX368EPN+ can route one of eight single-ended communications signals into a shared processing channel in telecommunications equipment. The through-hole 18-pin PDIP package is straightforward to assemble in legacy or service-oriented circuit boards, and the electronic multiplexing function avoids the mechanical complexity of a relay matrix. System designers should compare the 1.8 kOhm on-resistance against source impedance and bandwidth requirements. Control sequencing, fault recovery, and allowable node voltages must follow the manufacturer datasheet.

🧩

Analog Sensor Interface

The MAX368EPN+ is suitable for selecting among multiple low-bandwidth sensor outputs before amplification or conversion. Its 8:1 configuration gives an eight-channel front end a common analog path, while the 1.8 kOhm on-resistance must be included in the impedance budget of the selected sensor. The fault-protection and latch functions can help maintain a defined state during channel changes. Validate offset, leakage, settling time, and temperature behavior in the complete analog chain before production.

🔧

Test and Measurement Systems

The MAX368EPN+ can implement a compact eight-way analog test-point selector for legacy instrumentation. One multiplexer channel presents the selected DUT or fixture node to a shared meter, amplifier, or comparator. The single-ended architecture and 1.8 kOhm on-resistance are appropriate for many low-frequency measurement paths, but high-impedance sources may require additional buffering. Confirm leakage, switching transients, and settle time against the required measurement accuracy.

🖥️

Data Acquisition Modules

An eight-input data-acquisition module can use the MAX368EPN+ to select one analog source for a shared converter or amplifier. This arrangement is most appropriate where channels have similar impedance and bandwidth and where the 8:1 topology provides a practical reduction in routing complexity. The 1.8 kOhm switch resistance should be included in gain and source-loading calculations. The obsolete lifecycle status requires an exception for new designs or a planned migration to a supported equivalent.

⚡

Legacy Control-System Service

The MAX368EPN+ is relevant to maintenance and repair of legacy industrial control equipment that already uses an 18-pin PDIP analog multiplexer. Its through-hole package supports board-level replacement when lead spacing, pin functions, and electrical ratings match the original assembly. Service engineers should preserve the original grade and latch configuration to avoid subtle control differences. Request traceable inventory through the quote form and inspect date codes, soldering condition, and continuity before installation.

Buod ng mga Inirekomendang Produkto

MAX368CPN+ Analog Devices Ginagamit sa: Industrial Measurement and Control, Test and Measurement Systems, Legacy Control-System Service MAX368EJN Related 18-pin PDIP 8:1 multiplexer Ginagamit sa: Industrial Measurement and Control, Test and Measurement Systems, Legacy Control-System Service MAX368CPE+ Same-family 18-pin PDIP multiplexer Ginagamit sa: Telecommunications Signal Routing, Data Acquisition Modules MAX368EPE+ Same-family 18-pin PDIP multiplexer Ginagamit sa: Telecommunications Signal Routing, Data Acquisition Modules MAX368CJN+ Same-family 18-pin PDIP multiplexer Ginagamit sa: Analog Sensor Interface MAX368EPN+ Analog Devices Ginagamit sa: Analog Sensor Interface
What is the MAX368EPN+ used for?
The MAX368EPN+ is a single-ended, 8:1 analog multiplexer used to route one of eight input signals to a shared output. It combines a 1.8 kOhm on-resistance with fault-protected operation and a latch function in an 18-pin PDIP package. According to the Maxim Integrated datasheet, the device is intended for analog interface applications where electronic channel selection is preferable to a mechanical relay matrix.
What are the key specifications of MAX368EPN+?
The principal MAX368EPN+ specifications are an 8:1 multiplex configuration, one switching circuit, 1.8 kOhm on-resistance, single-ended operation, and an 18-pin PDIP package. The Maxim Integrated datasheet identifies it as a fault-protected analog multiplexer with latch. Other detailed limits, including supply voltage, switching time, bandwidth, leakage, and full temperature range, are not stated in the product record and should be confirmed directly in the datasheet.
Where can I download the MAX368EPN+ datasheet PDF?
The MAX368EPN+ datasheet is accessible through the Maxim Integrated product document linked on the MAX368EPN datasheet page. The document covers the fault-protected analog multiplexer with latch and its 18-pin PDIP implementation. Download the document from the manufacturer-linked PDF path and use its pin-description and electrical-characteristics tables for PCB assignment, voltage limits, switching performance, and operating-temperature verification.
Where is the MAX368EPN+ pinout located?
The MAX368EPN+ pinout is located in the pin-description section of the Maxim Integrated datasheet for the 18-pin PDIP package. Use that table to assign the eight input channels, common output, control inputs, supply connections, and enable or latch functions. Do not infer pin functions from the DIP body outline alone, because the exact MAX368EPN+ pin assignments must be checked against the manufacturer document.
Is MAX368EPN+ suitable for industrial signal multiplexing?
Yes, MAX368EPN+ is identified as an industrial-temperature-grade analog multiplexer in an 18-pin PDIP package. Its 8:1 configuration and 1.8 kOhm on-resistance suit industrial measurement and control systems where several analog sources share one downstream channel. The final suitability still depends on signal amplitude, source impedance, bandwidth, switching speed, and the full operating-temperature limits in the Maxim Integrated datasheet.
Is MAX368EPN+ the same as MAX368CPN+?
The MAX368EPN+ and MAX368CPN+ are closely related 18-pin PDIP 8:1 analog multiplexers, but their ordering suffixes can indicate different temperature grades. The comparison record describes their functional characteristics and several main parameters as consistent while noting that some electrical characteristics differ. Confirm the exact suffix, supply ratings, and electrical tables in the manufacturer datasheet before treating either part as a drop-in replacement.
MAX368EPN+ vs MAX368EJN - which is better for industrial control?
MAX368EPN+ is the safer lifecycle choice for a new industrial-control design because it is explicitly identified as an industrial-grade part, while MAX368EJN is a related 18-pin PDIP variant whose suffix denotes a different temperature grade. Both use the same 8:1 multiplexing architecture. The MAX368EPN+ has a confirmed 1.8 kOhm on-resistance, whereas detailed EJN electrical differences require confirmation in the manufacturer documentation.
When should I choose MAX368CPN+ instead of MAX368EPN+?
Choose MAX368CPN+ instead of MAX368EPN+ only when its commercial temperature grade covers the required ambient range and its exact electrical limits match the system. Both devices are described as 18-pin PDIP 8:1 multiplexers, making the PCB footprint compatible, but the ordering suffixes represent different grades. Use the MAX368EPN+ for industrial environments and verify the CP variant's grade and lifecycle before committing to it.
What is the best drop-in replacement for MAX368EPN+?
MAX368CPN+ is a potential 18-pin PDIP drop-in candidate because it shares the 8:1 single-ended multiplexer architecture and package, but its temperature grade and some electrical characteristics differ. MAX368EJN is another related 18-pin PDIP option. Neither should be approved as a drop-in replacement until the suffix-specific electrical tables, control logic, supply requirements, and latch behavior have been checked against the MAX368EPN+ datasheet.
Can MAX368EJN replace MAX368EPN+ without PCB changes?
MAX368EJN can fit the same 18-pin PDIP footprint, so a board change is unlikely, but physical compatibility alone does not guarantee electrical drop-in status. The cross-reference record states that the functional and main parameters are broadly consistent while some electrical characteristics differ. Validate temperature grade, supply voltage, on-resistance, logic levels, latch operation, and channel behavior before using it as a MAX368EPN+ substitute.
Where can I buy MAX368EPN+ online?
Use the Request a Quote form on this page to ask for MAX368EPN+ availability, obsolete-part handling, and a formal quotation. The exact device is identified as obsolete, so confirm whether the offered inventory is original, traceable, and suitable for the intended production quantity. Provide the target quantity, date code requirements, delivery location, and quality documentation with the request to accelerate review.
What is the price of MAX368EPN+?
Use the Request a Quote form on this page for the current MAX368EPN+ quotation. Because the part is obsolete and remaining inventory can have different traceability, date-code, and packaging conditions, a static price would not reflect the configuration being offered. Submit the required quantity and inspection requirements so the quotation can be tied to the actual supply condition.
What is the lead time and stock status for MAX368EPN+?
Current stock and lead time for MAX368EPN+ should be confirmed through the Request a Quote form on this page. The manufacturer lifecycle listing identifies this exact device as obsolete, so available inventory may be finite and dependent on lot traceability. Include production schedule, required quantity, acceptable date codes, and inspection criteria when requesting a delivery commitment.
Is MAX368EPN+ still active?
No, MAX368EPN+ is identified as obsolete. The Maxim Integrated datasheet record and product catalog material describe the device as an 18-pin PDIP fault-protected analog multiplexer with latch, while the current product information marks it obsolete. Engineers should treat it as a legacy component and use the Request a Quote form for possible inventory rather than assuming a new-production lifecycle commitment.
How should the MAX368EPN+ be protected in an analog circuit?
Protect the MAX368EPN+ by keeping all switched-node voltages within the limits stated in the Maxim Integrated datasheet and by placing suitable input protection ahead of exposed signal lines. Its fault-protected and latch characteristics help control transient behavior, but they do not eliminate external clamping requirements. Confirm source impedance, bandwidth, leakage, and switching transients, then validate the complete channel in the intended operating environment.

Impormasyon ng Talumpati sa Engineering for MAX368EPN+ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose MAX368EPN+ when maintaining an existing 18-pin PDIP industrial design or repairing equipment that specifically requires the MAX368EPN+ suffix and its fault-protected, latched multiplexing behavior. Its confirmed characteristics include an 8:1 single-ended configuration and 1.8 kOhm on-resistance. MAX368CPN+ may suit a commercial-temperature application that fits its suffix-specific limits, while MAX368EJN offers another same-package candidate whose electrical and temperature details require direct comparison. MAX368CPE+, MAX368EPE+, and MAX368CJN+ are same-family PDIP options for controlled redesign work. For every alternative, confirm supply voltage, logic levels, latch polarity, control timing, leakage, bandwidth, and lifecycle status. Because the target is obsolete, use it for existing-product support only when a supported alternative cannot be qualified without disrupting the system.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MAX368CPN+ MAX368EJN MAX368CPE+ MAX368EPE+ MAX368CJN+
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 18-pin PDIP 18-pin PDIP 18-pin PDIP 18-pin PDIP 18-pin PDIP 18-pin PDIP
Mounting Type Through-hole Through-hole Through-hole Through-hole Through-hole Through-hole

Pangunahing mga Pagkakaiba

  • Industrial-grade identity with a confirmed 1.8 kOhm on-resistance (kumpara saMAX368CPN+)
  • Same-package 8:1 architecture for legacy board replacement (kumpara saMAX368EJN)
  • Fault-protected multiplexing with an integrated latch function (kumpara saMAX368CPE+)

Talaan ng Disenyo

Do not treat physical package equality as proof that MAX368 suffix variants are electrically interchangeable. Verify the ordering-suffix temperature grade, supply limits, logic thresholds, latch behavior, channel characteristics, and absolute maximum ratings against the manufacturer datasheet. MAX368CPN+ and MAX368EJN appear in the cross-reference material with the same 18-pin PDIP format, but the comparison record states that some electrical characteristics differ.

Include the stated 1.8 kOhm on-resistance when calculating source loading, especially for high-impedance sensors. The effective source impedance can degrade channel-to-channel amplitude accuracy and offset accuracy when several input networks are multiplexed. Use the manufacturer datasheet to obtain leakage, switching time, bandwidth, and off-impedance data, then simulate settling and crosstalk across the intended temperature range.

Route the eight inputs, common output, control signals, and supply connections according to the 18-pin PDIP pin-description table. Keep sensitive analog traces away from digital control and return-current paths, provide a direct ground reference near the device, and avoid long stubs around high-impedance inputs. Because the device is obsolete, preserve the original footprint and routing in repair and redesign boards to simplify future substitution.

Decouple the supply pins with the capacitance and placement specified in the Maxim Integrated datasheet. Keep supply return current separate from sensitive analog returns where practical, and confirm that startup, fault recovery, and latch transitions do not drive an input beyond its permitted voltage range. External input clamping may still be required because the integrated fault-protection function does not replace application-specific surge protection.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The product record does not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. AEC-Q100 is recorded as not applicable because this is an industrial analog interface IC rather than an automotive-qualified device.

Data napatotohanan sa: 2026-11-19 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MAX368EPN+ datasheet MAX368EPN+ pinout MAX368EPN+ datasheet pdf MAX368EPN+ equivalent MAX368EPN+ replacement MAX368EPN+ drop-in replacement MAX368EPN+ 8:1 multiplexer MAX368EPN+ 1.8 kOhm MAX368EPN+ PDIP-18 MAX368EPN+ obsolete MAX368EPN+ price MAX368EPN+ stock Analog Devices MAX368EPN+ MAX368EPN+ vs MAX368CPN+ MAX368EPN+ industrial multiplexer

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices Maxim Integrated MAX368EPN+ MAX368CPN+ MAX368EJN MAX368CPE+ MAX368EPE+ MAX368CJN+ analog multiplexer analog switch multiplexer or demultiplexer interface IC semiconductor single-ended signal 8:1 multiplexer 1.8 kOhm on-resistance fault protection latch function 18-pin PDIP DIP package through-hole mounting industrial temperature grade telecommunications equipment industrial measurement and control analog signal routing
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ