MC33199DR2 - Automotive ISO 9141 Driver | NXP
MPN: MC33199DR2 ✓ NakahandaMC33199DR2 Ulas
An ISO 9141 serial-link driver is an interface circuit that connects a microcontroller or other diagnostic controller to a vehicle network. It belongs to the broader hierarchy of automotive interface ICs, serial transceiver ICs, interface ICs, and semiconductors. Its practical role is to translate controller-level logic signals into electrical signaling suitable for the physical diagnostic bus while providing the electrical characteristics required by the ISO 9141 application.
The principal identified feature is the MC33199D's 1-driver/0-receiver arrangement. This focused architecture is appropriate when the surrounding diagnostic electronics perform receive functions elsewhere and the MCU requires a dedicated ISO 9141 line driver. Its 14-SOIC package provides a conventional surface-mount interface that can be assembled using standard automotive PCB practices. The DR2 ordering suffix identifies the manufacturer's specified packaging configuration.
The device is intended for automotive diagnostic communication rather than general-purpose RS-232, RS-485, or CAN signal conditioning. It should be selected when the system architecture requires an ISO 9141 K-line or L-line interface between a vehicle controller and an external diagnostic connector. Designers must still confirm voltage levels, bus topology, external network components, protection requirements, and timing against the relevant vehicle diagnostic standard before releasing the design.
Typical applications include automotive diagnostic connectors, engine-control test equipment, vehicle communication modules, garage-test equipment, and service-bus analyzers. These systems often combine an MCU, an ISO 9141 physical-layer driver, connector protection, and diagnostic software. MC33199DR2 is useful when the diagnostic interface is specifically based on ISO 9141 rather than a higher-bandwidth CAN or LIN network.
The principal design consideration is interface compatibility. Confirm that the selected MCU output levels, timing, and K-line or L-line wiring match the MC33199D requirements. Because an automotive diagnostic port connects to external equipment and vehicle wiring, validate transient immunity, fault behavior, grounding, and protection at the connector rather than treating the IC as the only safeguard.
This product page combines the exact MC33199DR2 ordering information, package identity, documented interface role, sourcing links, and engineering-oriented selection guidance. It also distinguishes verified drop-in candidates from merely similar interface ICs, helping engineers avoid choosing a functionally related transceiver that cannot replace the original footprint.
Mga alternatibo na pwedeng ilagay na MC33199DR2 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok MC33199DR2 (parehas na form factor at footprint) — pagkakaiba sa Package, Product Type, Package Width, Application Category, Package Length.
MC33199D
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →MC33390D
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →MC33391D
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
MC33199DR2 Mga Spesipikasyon
| Product Type | Automotive ISO 9141 serial-link driver IC |
| Driver Count | 1 driver channel |
| Receiver Count | 0 receiver channels |
| Diagnostic Standard | ISO 9141 |
| Application Category | Automotive diagnostic interface |
| Packhaging | 14-pin SOIC |
| Package Width | 3.90 mm |
| Package Length | 0.154 in / 3.91 mm |
| Uri ng Pagpapasok | Surface mount |
| Bilang ng Pins | 14 pins |
Gabay sa Pin Configuration ng MC33199DR2 0.154 in / 3.91 mm
Pin configuration para sa MC33199DR2 (0.154 in / 3.91 mm package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa MC33199DR2.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
MC33199DR2 ay nararapat para sa 6 aplikasyons: Vehicle Diagnostic Interfaces, Automotive ECU Test Equipment, Engine Control Modules, Garage Diagnostic Analyzers, Automotive Communication Modules, Production-Line Vehicle Diagnostics.
Vehicle Diagnostic Interfaces
The MC33199DR2 fits an ISO 9141 diagnostic path between a vehicle controller and the external diagnostic connector because the MC33199D family provides one dedicated ISO 9141 driver channel. Place the device on the controller side of the K-line or L-line network and connect its logic input to the appropriate vehicle-controller output. Its 14-SOIC package supports conventional surface-mount assembly, while the confirmed one-driver architecture requires the receive function to be handled elsewhere when needed.
Inirekomenda
Automotive ECU Test Equipment
MC33199DR2 can serve as the ISO 9141 physical-layer driver in test equipment that emulates or monitors a vehicle diagnostic port. The one-driver/0-receiver arrangement is appropriate when the tester needs to inject a request signal but obtains diagnostic information through another receiver channel or circuit. Designers should reproduce the required line-network components and connector protection, then validate signal timing against the ISO 9141 implementation used by the vehicle platform.
Inirekomenda
Engine Control Modules
The MC33199DR2 is applicable when an engine-control module must expose an ISO 9141 diagnostic connection for service tools or production testing. Its confirmed 14-SOIC package and single-driver architecture support a compact diagnostic subsystem around an automotive microcontroller. Keep the bus-side trace away from sensitive analog and processor supplies, provide the specified protection near the connector, and verify the network's idle, active, and faulted states across temperature.
Inirekomenda
Garage Diagnostic Analyzers
A portable garage diagnostic analyzer can use MC33199DR2 as the ISO 9141 driver on its vehicle-facing interface. The device is specifically described as an interface between a microcontroller and the K and L lines of an ISO diagnostic port, making it appropriate for systems that communicate through legacy ISO 9141 diagnostic links. The analyzer should add automotive-grade transient protection and verify ground offsets, bus loading, and connector behavior with the service equipment expected in workshop conditions.
Inirekomenda
Automotive Communication Modules
MC33199DR2 can be integrated into a communication module that provides an ISO 9141 diagnostic channel alongside other vehicle functions. The 14-SOIC package is easy to place beside an automotive microcontroller, and the dedicated driver function provides a defined interface toward the diagnostic wiring. Because the device has no integrated receiver channel, a complete bidirectional diagnostic design may require a separate receiver arrangement or a related multi-function interface device.
Inirekomenda
Production-Line Vehicle Diagnostics
MC33199DR2 is suitable for production-line systems that issue ISO 9141 diagnostic commands during end-of-line testing. A one-driver architecture is useful when the tester transmits requests through the vehicle diagnostic line while a separate circuit handles reception or response detection. Validate signal timing, voltage margins, and fault recovery at the connected harness before using the setup in high-volume production, and place connector protection close to the point where the external cable enters the equipment.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for MC33199DR2 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | MC33199D | MC33390D | MC33391D |
|---|---|---|---|---|
| Package | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Primary Function | Automotive ISO 9141 serial-link driver | Automotive ISO 9141 serial-link driver | Automotive ISO 9141 interface device | Automotive ISO 9141 interface device |
| Diagnostic Standard | ISO 9141 | ISO 9141 | ISO 9141 | ISO 9141 |
| Number of Pins | 14 pins | 14 pins | 14 pins | 14 pins |
| Automotive Interface Role | MCU-to-K/L-line diagnostic interface | MCU-to-K/L-line diagnostic interface | Automotive diagnostic bus interface | Automotive diagnostic bus interface |
Pangunahing mga Pagkakaiba
- Exact base-family ordering relationship (kumpara saMC33199D)
- Focused driver-only signal path (kumpara saMC33390D)
- Purpose-defined K/L-line interface role (kumpara saMC33391D)
Talaan ng Disenyo
Do not treat an ISO 9141-compatible interface IC as a universal replacement for CAN, LIN, RS-232, or RS-485 hardware. MC33199DR2 has a confirmed 1-driver/0-receiver arrangement, so a design requiring an integrated receiver may need additional circuitry. Before substituting a related 14-pin device, compare every lead function, bus-side connection, supply limit, timing characteristic, and fault state against the original MC33199D schematic.
Route the bus-side K-line or L-line connection away from clocks, sensors, radio-frequency circuits, and other sensitive analog inputs. Keep the connector protection network close to the diagnostic connector so transient current is diverted before it reaches the IC. Provide a low-impedance ground reference near the device and keep the protected diagnostic connection physically separated from unrelated external wiring.
Use the manufacturer's recommended supply arrangement and verify power-up, power-down, idle, and fault behavior on the complete diagnostic circuit. The available product information does not establish the numeric supply range or output-current limit for MC33199DR2, so do not estimate those values from an unrelated interface IC. Confirm them in the MC33199D electrical characteristics and worst-case harness-loading conditions.
Validate the complete vehicle-side network rather than only the IC output waveform. Include cable length, connector capacitance, external bias components, harness leakage, and the receiving equipment in the test. MC33199DR2 is a one-channel ISO 9141 driver, and timing or voltage margins may differ when connected to real diagnostic equipment even if the isolated bench waveform appears correct.
Impormasyon ng Pagsunod sa Kautusan
The device is described as an automotive ISO 9141 serial-link driver, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration is available for this ordering code.