MC33199DR2 - Automotive ISO 9141 Driver | NXP
MPN: MC33199DR2 ✓ 啟用中MC33199DR2 概覽
An ISO 9141 serial-link driver is an interface circuit that connects a microcontroller or other diagnostic controller to a vehicle network. It belongs to the broader hierarchy of automotive interface ICs, serial transceiver ICs, interface ICs, and semiconductors. Its practical role is to translate controller-level logic signals into electrical signaling suitable for the physical diagnostic bus while providing the electrical characteristics required by the ISO 9141 application.
The principal identified feature is the MC33199D's 1-driver/0-receiver arrangement. This focused architecture is appropriate when the surrounding diagnostic electronics perform receive functions elsewhere and the MCU requires a dedicated ISO 9141 line driver. Its 14-SOIC package provides a conventional surface-mount interface that can be assembled using standard automotive PCB practices. The DR2 ordering suffix identifies the manufacturer's specified packaging configuration.
The device is intended for automotive diagnostic communication rather than general-purpose RS-232, RS-485, or CAN signal conditioning. It should be selected when the system architecture requires an ISO 9141 K-line or L-line interface between a vehicle controller and an external diagnostic connector. Designers must still confirm voltage levels, bus topology, external network components, protection requirements, and timing against the relevant vehicle diagnostic standard before releasing the design.
Typical applications include automotive diagnostic connectors, engine-control test equipment, vehicle communication modules, garage-test equipment, and service-bus analyzers. These systems often combine an MCU, an ISO 9141 physical-layer driver, connector protection, and diagnostic software. MC33199DR2 is useful when the diagnostic interface is specifically based on ISO 9141 rather than a higher-bandwidth CAN or LIN network.
The principal design consideration is interface compatibility. Confirm that the selected MCU output levels, timing, and K-line or L-line wiring match the MC33199D requirements. Because an automotive diagnostic port connects to external equipment and vehicle wiring, validate transient immunity, fault behavior, grounding, and protection at the connector rather than treating the IC as the only safeguard.
This product page combines the exact MC33199DR2 ordering information, package identity, documented interface role, sourcing links, and engineering-oriented selection guidance. It also distinguishes verified drop-in candidates from merely similar interface ICs, helping engineers avoid choosing a functionally related transceiver that cannot replace the original footprint.
直接替換替代品,適用於 MC33199DR2 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MC33199DR2 (相同外形與佔位) — 差異在於 Package, Product Type, Package Width, Application Category, Package Length.
MC33199D
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MC33390D
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MC33391D
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MC33199DR2 規格
| Product Type | Automotive ISO 9141 serial-link driver IC |
| Driver Count | 1 driver channel |
| Receiver Count | 0 receiver channels |
| Diagnostic Standard | ISO 9141 |
| Application Category | Automotive diagnostic interface |
| 封裝 | 14-pin SOIC |
| Package Width | 3.90 mm |
| Package Length | 0.154 in / 3.91 mm |
| 安裝類型 | Surface mount |
| 腳位數 | 14 pins |
MC33199DR2 0.154 in / 3.91 mm 腳位配置指南
MC33199DR2(0.154 in / 3.91 mm 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: MC33199DR2.
請參閱 資料表 以查看完整腳位配置。
典型應用
MC33199DR2 適用於 6 應用s: Vehicle Diagnostic Interfaces, Automotive ECU Test Equipment, Engine Control Modules, Garage Diagnostic Analyzers, Automotive Communication Modules, Production-Line Vehicle Diagnostics.
Vehicle Diagnostic Interfaces
The MC33199DR2 fits an ISO 9141 diagnostic path between a vehicle controller and the external diagnostic connector because the MC33199D family provides one dedicated ISO 9141 driver channel. Place the device on the controller side of the K-line or L-line network and connect its logic input to the appropriate vehicle-controller output. Its 14-SOIC package supports conventional surface-mount assembly, while the confirmed one-driver architecture requires the receive function to be handled elsewhere when needed.
推薦
Automotive ECU Test Equipment
MC33199DR2 can serve as the ISO 9141 physical-layer driver in test equipment that emulates or monitors a vehicle diagnostic port. The one-driver/0-receiver arrangement is appropriate when the tester needs to inject a request signal but obtains diagnostic information through another receiver channel or circuit. Designers should reproduce the required line-network components and connector protection, then validate signal timing against the ISO 9141 implementation used by the vehicle platform.
推薦
Engine Control Modules
The MC33199DR2 is applicable when an engine-control module must expose an ISO 9141 diagnostic connection for service tools or production testing. Its confirmed 14-SOIC package and single-driver architecture support a compact diagnostic subsystem around an automotive microcontroller. Keep the bus-side trace away from sensitive analog and processor supplies, provide the specified protection near the connector, and verify the network's idle, active, and faulted states across temperature.
推薦
Garage Diagnostic Analyzers
A portable garage diagnostic analyzer can use MC33199DR2 as the ISO 9141 driver on its vehicle-facing interface. The device is specifically described as an interface between a microcontroller and the K and L lines of an ISO diagnostic port, making it appropriate for systems that communicate through legacy ISO 9141 diagnostic links. The analyzer should add automotive-grade transient protection and verify ground offsets, bus loading, and connector behavior with the service equipment expected in workshop conditions.
推薦
Automotive Communication Modules
MC33199DR2 can be integrated into a communication module that provides an ISO 9141 diagnostic channel alongside other vehicle functions. The 14-SOIC package is easy to place beside an automotive microcontroller, and the dedicated driver function provides a defined interface toward the diagnostic wiring. Because the device has no integrated receiver channel, a complete bidirectional diagnostic design may require a separate receiver arrangement or a related multi-function interface device.
推薦
Production-Line Vehicle Diagnostics
MC33199DR2 is suitable for production-line systems that issue ISO 9141 diagnostic commands during end-of-line testing. A one-driver architecture is useful when the tester transmits requests through the vehicle diagnostic line while a separate circuit handles reception or response detection. Validate signal timing, voltage margins, and fault recovery at the connected harness before using the setup in high-volume production, and place connector protection close to the point where the external cable enters the equipment.
推薦
推薦產品摘要
工程參考資料,適用於 MC33199DR2 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MC33199D | MC33390D | MC33391D |
|---|---|---|---|---|
| Package | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Primary Function | Automotive ISO 9141 serial-link driver | Automotive ISO 9141 serial-link driver | Automotive ISO 9141 interface device | Automotive ISO 9141 interface device |
| Diagnostic Standard | ISO 9141 | ISO 9141 | ISO 9141 | ISO 9141 |
| Number of Pins | 14 pins | 14 pins | 14 pins | 14 pins |
| Automotive Interface Role | MCU-to-K/L-line diagnostic interface | MCU-to-K/L-line diagnostic interface | Automotive diagnostic bus interface | Automotive diagnostic bus interface |
主要差異化特點
- Exact base-family ordering relationship (對比MC33199D)
- Focused driver-only signal path (對比MC33390D)
- Purpose-defined K/L-line interface role (對比MC33391D)
設計說明
Do not treat an ISO 9141-compatible interface IC as a universal replacement for CAN, LIN, RS-232, or RS-485 hardware. MC33199DR2 has a confirmed 1-driver/0-receiver arrangement, so a design requiring an integrated receiver may need additional circuitry. Before substituting a related 14-pin device, compare every lead function, bus-side connection, supply limit, timing characteristic, and fault state against the original MC33199D schematic.
Route the bus-side K-line or L-line connection away from clocks, sensors, radio-frequency circuits, and other sensitive analog inputs. Keep the connector protection network close to the diagnostic connector so transient current is diverted before it reaches the IC. Provide a low-impedance ground reference near the device and keep the protected diagnostic connection physically separated from unrelated external wiring.
Use the manufacturer's recommended supply arrangement and verify power-up, power-down, idle, and fault behavior on the complete diagnostic circuit. The available product information does not establish the numeric supply range or output-current limit for MC33199DR2, so do not estimate those values from an unrelated interface IC. Confirm them in the MC33199D electrical characteristics and worst-case harness-loading conditions.
Validate the complete vehicle-side network rather than only the IC output waveform. Include cable length, connector capacitance, external bias components, harness leakage, and the receiving equipment in the test. MC33199DR2 is a one-channel ISO 9141 driver, and timing or voltage margins may differ when connected to real diagnostic equipment even if the isolated bench waveform appears correct.
合規資訊
The device is described as an automotive ISO 9141 serial-link driver, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration is available for this ordering code.