NXP Semiconductors

MC9S08PA16VWJ - 8-Bit 20MHz 16KB S08 MCU | NXP

MPN: MC9S08PA16VWJ ✓ Nakahanda
3.3 V or 5 V Vdss 20-pin SOIC Package 20 MHz Speed 16 KB Flash Memory
MOQ: 1 |

MC9S08PA16VWJ Ulas

The NXP Semiconductors MC9S08PA16VWJ is an 8-bit S08 microcontroller operating up to 20 MHz, with 16 KB of Flash program memory and analog sensing and PWM output, in a 20-pin SOIC package. It belongs to the MC9S08PA16 family, combining a compact 8-bit core with embedded analog and timing resources for cost-sensitive embedded control.

An 8-bit microcontroller is a programmable semiconductor containing a processor core, memory, and peripheral interfaces on one integrated circuit. The S08 architecture uses a compact instruction set suited to appliance controls, sensor nodes, motor-control functions, and other embedded systems. Within the product hierarchy, the MC9S08PA16VWJ is an S08-family microcontroller, an 8-bit MCU, and a member of the broader embedded semiconductor category.

Key device attributes include a maximum operating frequency of 20 MHz, 16 KB of Flash memory, 3.3 V and 5 V operation, PWM output, analog sensing, EEPROM capability, and an analog comparator. These resources allow a design to combine control logic with sensor conditioning or programmable waveform generation. The 20-pin SOIC package also supports conventional surface-mount assembly and provides a practical upgrade path for compact industrial and consumer equipment.

The S08PA16 series integrates the core, Flash program memory, data EEPROM, timers, serial communication, and analog peripherals to reduce external component count. The manufacturer describes the family as supporting industrial and consumer applications, while the datasheet identifies operating characteristics for an ambient temperature range of -40°C to 105°C. Exact ADC resolution, RAM capacity for this exact ordering code, and all peripheral mapping details should be confirmed in the MC9S08PA16 Series Data Sheet before firmware and PCB sign-off.

Typical applications include small motor controllers, industrial sensor interfaces, temperature-control products, compact power-management controllers, consumer appliance controls, and low-cost embedded nodes. PWM is useful for actuator or drive-control functions, while analog sensing supports measurements from resistive sensors. The 20 MHz S08 core provides additional control headroom for protocols, status handling, and supervisory logic around the primary application.

PCB implementation should preserve the manufacturer’s recommended decoupling and clock-network layout, especially when ADC channels or PWM outputs are used. Use the datasheet pin-description table for exact port multiplexing and alternate-function assignments, and verify the selected crystal or internal-clock configuration against the required operating frequency. Firmware should also account for the nonvolatile-memory endurance and programming characteristics of the S08PA16 family.

This product summary combines the manufacturer’s device description with the S08PA16 data sheet and reference-manual structure to clarify memory, speed, packaging, and application fit. It also distinguishes the 20-pin SOIC MC9S08PA16VWJ from other package variants so engineers can identify a device that matches both the PCB footprint and firmware requirements.

Mga alternatibo na pwedeng ilagay na MC9S08PA16VWJ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Wala ng magagamit na drop-in alternatibo para sa produkto na ito.

Hilingin ang Alternatibo

MC9S08PA16VWJ Mga Pinakamataas na Rating at Electrical Characteristics

Microcontroller Type 8-bit S08 microcontroller
Maximum CPU Frequency 20 MHz
Program Memory 16 KB Flash
Program Memory Organization 16K x 8 bits
Volte ng Pagbibigay 3.3 V or 5 V
Operating Ambient Temperature -40°C to 105°C
PWM Output Supported
Analog Comparator Integrated
Instruction Set 8-bit CISC S08 architecture
Packhaging 20-pin SOIC
Uri ng Pagpapasok Surface mount

Gabay sa Pin Configuration ng MC9S08PA16VWJ 20-pin soic

Pin configuration para sa MC9S08PA16VWJ (20-pin soic package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 20-pin soic package para sa MC9S08PA16VWJ

Wala ng detalyadong pinout data na magagamit para sa MC9S08PA16VWJ.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MC9S08PA16VWJ ay nararapat para sa 6 aplikasyons: Compact Motor Controller, Industrial Sensor Interface, Temperature-Control Product, Consumer Appliance Controller, Low-Cost Embedded Sensor Node, Small Power-Supply Controller.

🔧

Compact Motor Controller

The MC9S08PA16VWJ fits compact motor-control designs that need PWM generation, sensor feedback, and supervisory logic without a higher-bit processor. Its 20 MHz S08 core provides control bandwidth, while the integrated motor-control flexible timer supports deterministic counting and waveform generation. The 16 KB Flash allows the controller to store motion sequences, protection logic, and a communication protocol. In a typical design, the MCU reads a sensor through an analog channel, commands a power stage through PWM and general-purpose I/O, and monitors fault conditions. Because the MCU does not directly replace a power MOSFET or gate driver, the external drive stage and protection components must be sized for the motor voltage and current.

🏭

Industrial Sensor Interface

The MC9S08PA16VWJ is suitable for an industrial sensor node that combines analog measurement with local thresholding and status reporting. Its integrated analog sensing capability and comparator allow the MCU to evaluate resistive sensors or external analog signals, while the 20 MHz core supports sampling, filtering, and protocol handling. The 16 KB Flash can hold application logic and calibration constants, and EEPROM supports nonvolatile configuration storage. For designs operating across industrial temperature conditions, the family’s characterized -40°C to 105°C ambient range is relevant. The analog front end should still include suitable input protection, and the ADC acquisition sequence, reference voltage, and selected resolution must be implemented exactly as described in the manufacturer datasheet.

🌡️

Temperature-Control Product

The MC9S08PA16VWJ can serve as the controller in a small thermostatic appliance or temperature-control module. Its analog comparator and analog sensing resources support input conditioning, while PWM can control a heater driver, alarm, or indicator. The 8-bit S08 core executes the control loop, applies hysteresis, and manages startup behavior, while 16 KB Flash provides room for a complete embedded application. A practical design would place the sensor near the MCU power section only when thermal gradients permit, otherwise use a remote sensor and protect the controller from conducted noise. Firmware should include sensor-range checks and safe outputs for sensor failure before the product is released.

🏠

Consumer Appliance Controller

The MC9S08PA16VWJ is appropriate for consumer appliances that combine digital control, analog sensing, and low-cost energy or actuator management. The 20-pin SOIC package supports a compact controller board, the 16 KB Flash accommodates application firmware, and PWM can drive indicators, valves, or small power stages. Its 3.3 V and 5 V operating choices help align the controller with common logic and sensor networks. In an appliance, the MCU can manage button inputs, run a state machine, monitor sensors, and coordinate relays or triac drivers. The product design must add suitable isolation, surge protection, and thermal control around mains-connected switching stages because those functions are outside the MCU’s direct drive capability.

🧩

Low-Cost Embedded Sensor Node

The MC9S08PA16VWJ supports a compact embedded sensor node when the design prioritizes low cost, local control, and a modest memory footprint. The S08 core handles acquisition, filtering, threshold decisions, and low-rate communications, while EEPROM can retain configuration or counters between power cycles. Its 16 KB Flash is suitable for lightweight protocol stacks and application logic rather than large graphical or networking workloads. A typical node would wake periodically, sample an analog input, compare the result against programmed thresholds, and update a serial interface or indicator. Battery-powered implementations should account for the MCU’s active and sleep behavior, external sensor standby current, and the energy needed to enter and leave each operating mode.

⚡

Small Power-Supply Controller

The MC9S08PA16VWJ can coordinate a small power-conversion subsystem in applications that require sequencing, monitoring, or a user interface beyond a basic analog controller. Analog sensing supports feedback measurement, PWM can operate an auxiliary converter or status indicator, and the 20 MHz core can supervise multiple rails. The 16 KB Flash is appropriate for a compact state machine, configuration storage, and fault logging. The MCU should remain a controller rather than the primary power switch: use suitably rated external switching devices and add the protection required by the converted voltage and current. Firmware must implement startup delays, undervoltage behavior, and shutdown paths so that a firmware fault cannot create an unsafe output condition.

What is the operating voltage of MC9S08PA16VWJ?
The MC9S08PA16VWJ supports 3.3 V and 5 V operation as identified in the MC9S08PA16 Series Data Sheet. This voltage range allows the 8-bit S08 microcontroller to interface with common industrial and consumer logic levels. Exact power-sequencing, input-threshold, and regulator-related requirements for a particular board should be checked against the electrical-characteristics tables before connecting external sensors or communications transceivers.
How much Flash memory and processing speed does MC9S08PA16VWJ have?
The MC9S08PA16VWJ provides 16 KB of 16K x 8 Flash memory and operates at up to 20 MHz. According to the NXP product information and MC9S08PA16 Series Data Sheet, this combination gives an 8-bit S08 design enough program space and control bandwidth for compact embedded tasks. Actual firmware size depends on the selected compiler, library configuration, bootloader, and application features.
Where can I download the MC9S08PA16VWJ datasheet PDF?
The MC9S08PA16 Series Data Sheet is available through the MC9S08PA16_Rev1 PDF linked on this page. It contains electrical characteristics, clocking information, memory details, and peripheral descriptions for the S08PA16 family. Use the ordering-information section to confirm that MC9S08PA16VWJ is the 20-pin SOIC configuration, and use the MC9S08PA16 Reference Manual for detailed port and peripheral behavior.
Where can I find the MC9S08PA16VWJ pinout?
The MC9S08PA16VWJ pinout is shown in the MC9S08PA16 Series Data Sheet, while detailed multiplexed-port functions are documented in the MC9S08PA16 Reference Manual. The device uses a 20-pin SOIC package, but engineers should not infer every pin name solely from the package drawing because several port pins can support alternate peripheral functions. Assign PCB tracks from the manufacturer’s pin-description table and account for the package orientation mark.
What peripherals are integrated into MC9S08PA16VWJ?
The MC9S08PA16VWJ integrates an S08 core, 16 KB Flash, EEPROM, timers, PWM output, analog sensing capability, an analog comparator, and serial interfaces. According to the MC9S08PA16 family documentation, these resources simplify designs that otherwise require separate logic and analog components. Consult the Reference Manual before assignment because exact pin multiplexing, timer counts, and communication modes depend on the device configuration.
Is MC9S08PA16VWJ suitable for motor-control applications?
The MC9S08PA16VWJ is suitable for compact motor-control and actuator-control applications because it combines PWM output with a motor-control flexible timer and an 8-bit S08 core rated up to 20 MHz. The S08PA16 family documentation identifies the flexible timer as a useful resource for motor-control designs. A production design must also verify current limits, drive topology, protection timing, and whether an external power MOSFET or driver is required.
Is MC9S08PA16VWJ suitable for industrial sensor interfaces?
The MC9S08PA16VWJ is suitable for industrial sensor interfaces when the sensing requirements fit its integrated ADC and analog comparator and the operating environment remains within -40°C to 105°C ambient. Its 20 MHz S08 core can handle sampling, filtering, threshold decisions, and supervisory communication. The manufacturer datasheet identifies analog sensing as a core family feature, while detailed conversion performance and channel count should be confirmed in the electrical tables.
MC9S08PA16VWJ vs MC9S08PA16AVTJ - which package fits my PCB?
MC9S08PA16VWJ is the 20-pin SOIC option, whereas MC9S08PA16AVTJ is identified as the 20-pin TSSOP option. The MC9S08PA16 Series Data Sheet and distributor descriptions associate both parts with the 8-bit, 20 MHz, 16 KB S08PA16 family, but their land patterns are not interchangeable. Select VWJ for an existing SOIC footprint and AVTJ for a compatible TSSOP footprint; verify pin-level functional mapping before treating either as a replacement.
MC9S08PA16VWJ vs MC9S08PA16AVLC - what should I check before switching?
MC9S08PA16VWJ uses a 20-pin SOIC package, while MC9S08PA16AVLC is a separate ordering configuration in the MC9S08PA16 family. The MC9S08PA16 family shares the S08 core and 16 KB Flash positioning, but package body size, pin count, thermal performance, and peripheral-pin mapping can change the board design. Confirm the exact AVLC package drawing and pin table before changing a PCB or recompiling pin-dependent firmware.
When should I choose MC9S08PA16VWJ over another 8-bit MCU?
Choose MC9S08PA16VWJ when the design specifically benefits from the S08 architecture, 20 MHz operation, 16 KB Flash, integrated analog and timing resources, and a 20-pin SOIC footprint. It is particularly suitable for compact controllers that need PWM, sensor inputs, and local nonvolatile data without a larger pin count. Choose another MCU family if the application requires more RAM, wider peripheral connectivity, a different architecture, or software already standardized on another instruction set.
Is MC9S08PA16VWJ suitable for consumer appliance control?
The MC9S08PA16VWJ is suitable for consumer appliance control because its 8-bit S08 core, 16 KB Flash, PWM output, analog sensing, and compact SOIC package support economical embedded control functions. The NXP product information identifies industrial and consumer applications for the S08PA16 family. Production suitability still depends on load switching, safety requirements, environmental exposure, and the number of I/O functions needed by the selected appliance.
What can replace MC9S08PA16VWJ?
A true drop-in replacement for MC9S08PA16VWJ must use the same 20-pin SOIC footprint, preserve pin-to-pin functions, and remain compatible with the S08 firmware and memory map. MC9S08PA16AVTJ and MC9S08PA16AVLC are related S08PA16 devices, but their package constructions differ, so they are not drop-in replacements on an existing SOIC board. Use a schematic and pin-by-pin cross-reference before selecting any substitute, or contact the manufacturer for a documented migration path.
Is there an NXP drop-in equivalent for MC9S08PA16VWJ?
No additional NXP drop-in equivalent with a verified 20-pin SOIC footprint was established for MC9S08PA16VWJ. The related MC9S08PA16 orderings use different physical packages, while the MC9S08PA16VWJ ordering already combines the family’s 8-bit core, 20 MHz speed, 16 KB Flash, PWM, and analog functions. Request a schematic review or manufacturer cross-reference when long-term sourcing continuity is required.
Where can I buy MC9S08PA16VWJ and what is its lead time?
Use the Request a Quote form on this page to request MC9S08PA16VWJ availability, current lead time, and minimum-order details. The manufacturer lists the S08PA16 family for industrial and consumer applications, while distributor pages identify the 20-pin SOIC ordering and 16 KB Flash configuration. The form is the appropriate channel for a current supply commitment because lead time and stock can change independently of the device specifications.
What is the price of MC9S08PA16VWJ?
A current unit price for MC9S08PA16VWJ is available through the Request a Quote form on this page. The quote should identify the exact 20-pin SOIC MPN, requested quantity, shipment destination, and any date-code requirements. This approach avoids publishing a stale market price and lets purchasing confirm the current commercial terms for the specific order quantity.
Is MC9S08PA16VWJ in stock?
Current MC9S08PA16VWJ stock should be confirmed through the Request a Quote form on this page. The form allows purchasing to check production and distributor inventory for the exact 20-pin SOIC ordering, including quantity, date-code, and delivery requirements. Firm stock commitments should be accepted only in the resulting quotation, because inventory can change after an initial inquiry.
What are the key specifications of MC9S08PA16VWJ that engineers should know?
The key MC9S08PA16VWJ specifications are an 8-bit S08 core, 20 MHz maximum operating frequency, 16 KB Flash organized as 16K x 8, 3.3 V or 5 V operation, PWM output, analog sensing, EEPROM, an analog comparator, and a 20-pin SOIC package. The MC9S08PA16 Series Data Sheet also characterizes the family over -40°C to 105°C ambient. These attributes position the device for compact consumer and industrial embedded controllers requiring mixed control and analog functions.

Impormasyon ng Talumpati sa Engineering for MC9S08PA16VWJ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose MC9S08PA16VWJ when the PCB requires a 20-pin SOIC footprint and the application benefits from an 8-bit S08 core operating up to 20 MHz with 16 KB Flash, EEPROM, PWM, analog sensing, and an analog comparator. It is a strong fit for compact appliance controls, industrial sensor interfaces, small motor controllers, and low-cost embedded nodes. MC9S08PA16AVTJ shares the PA16 family core and memory positioning but uses a 20-pin TSSOP footprint, so it is appropriate for a different PCB rather than as a drop-in SOIC substitution. MC9S08PA16AVLC may suit automotive or industrial designs, but its exact package and qualification conditions must be checked. MC9S08SH16MTJ is another S08-family option whose package and peripheral mapping require a separate schematic review. For production continuity, compare processor resources, package, pin multiplexing, clock requirements, and qualification rather than relying only on the 8-bit label.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MC9S08PA16AVTJ MC9S08PA16AVLC MC9S08SH16MTJ
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
CPU Architecture 8-bit S08 CISC 8-bit S08 CISC 8-bit S08 CISC 8-bit S08 CISC

Pangunahing mga Pagkakaiba

  • Compact 20-pin SOIC implementation (kumpara saMC9S08PA16AVTJ)
  • Direct match to an existing SOIC footprint (kumpara saMC9S08PA16AVLC)
  • 16 KB Flash with integrated analog and timing resources (kumpara saMC9S08SH16MTJ)

Talaan ng Disenyo

Use the pin-description and package-outline sections in the MC9S08PA16 Series Data Sheet when assigning the 20-pin SOIC footprint. Keep the MCU supply decoupling network close to its supply pins, provide a continuous ground reference, and route clock and sensitive analog inputs away from PWM and high-current switching traces. Because several port pins have alternate functions, confirm the final pin map against the firmware configuration rather than relying only on the simplified package drawing.

For analog-sensing designs, treat the ADC and comparator inputs as precision signals. Keep sensor traces short, isolate them from PWM edges and relay or switch-node currents, and use a stable ground reference. Follow the datasheet acquisition sequence and settling requirements, including any source-impedance limits. If a switching converter supplies the analog rail, validate the allowed ripple and filtering arrangement with measurement rather than assuming that nominal voltage regulation alone guarantees acceptable conversion accuracy.

Do not treat MC9S08PA16VWJ, MC9S08PA16AVTJ, and MC9S08PA16AVLC as interchangeable solely because they share the MC9S08PA16 family name. VWJ uses a 20-pin SOIC, AVTJ uses a 20-pin TSSOP, and the physical AVLC package requires separate confirmation. Before transferring firmware, compare pin multiplexing, reset behavior, clock configuration, and peripheral assignments. A footprint error can also place power pins incorrectly, so compare land patterns rather than counting total leads.

Calculate the MCU supply budget from the operating frequency, enabled peripherals, and I/O load instead of using a nominal regulator rating alone. Decouple the supply locally and ensure startup current does not cause input-voltage droop. For battery or energy-harvesting systems, measure active, sleep, and wakeup current on the intended board because clock configuration and peripheral states determine the practical consumption. The MC9S08PA16 Series Data Sheet should be used for final low-power mode settings.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

No definitive compliance statement for the exact MC9S08PA16VWJ ordering code was located. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status using the manufacturer’s current product documentation or a written supplier declaration.

Data napatotohanan sa: 2026-11-20 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MC9S08PA16VWJ datasheet MC9S08PA16VWJ pinout MC9S08PA16VWJ datasheet pdf MC9S08PA16VWJ equivalent MC9S08PA16VWJ replacement MC9S08PA16VWJ cross reference MC9S08PA16VWJ price MC9S08PA16VWJ stock NXP MC9S08PA16VWJ MC9S08PA16 20 pin SOIC MC9S08PA16 20MHz microcontroller MC9S08PA16 PWM analog sensing MC9S08PA16VWJ vs MC9S08PA16AVTJ MC9S08PA16VWJ reference manual MC9S08PA16 motor control application

Mga kaugnay na Mga Komponente at mga Tuntunin

NXP Semiconductors MC9S08PA16VWJ MC9S08PA16 MC9S08PA16AVTJ MC9S08PA16AVLC MC9S08SH16MTJ S08 architecture 8-bit microcontroller embedded microcontroller semiconductor 16 KB Flash EEPROM PWM analog comparator ADC 20 MHz 3.3 V 5 V SOIC-20 QFN family surface mount SMD motor control industrial sensor interface consumer appliance control
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ