MPC8536CVTAVLA557 - PowerQUICC III SoC 1.5GHz 783-FCPBGA | NXP
MPN: MPC8536CVTAVLA557 ✓ NakahandaMPC8536CVTAVLA557 Ulas
What is a PowerQUICC III SoC? The PowerQUICC III family is NXP's line of integrated communications processors that combine a PowerPC host core with specialized communications engines. In the broader taxonomy, MPC8536 sits within PowerPC microprocessors -> embedded processors -> microcontrollers and MPUs -> integrated circuits. PowerQUICC III is engineered for protocol termination, packet processing, and routing in networking and storage equipment, enabling OEMs to consolidate multiple discrete components into a single chip.
Key features include the e500 core with MMU and double-precision FPU, hardware encryption acceleration options (Security Engine), four GbE MACs with SGMII support, dual PCIe controllers, two SATA 2.0 ports, USB 2.0, and a high-bandwidth DDR2/DDR3 SDRAM controller with ECC. The 783-FCPBGA package exposes extensive parallel I/O and multiple high-speed SerDes lanes for flexible board-level integration in line cards, base stations, and industrial control systems.
The MPC8536CVTAVLA557 uses a 32-bit Power Architecture Book E implementation with out-of-order execution capability and superscalar dispatch. Its coherency fabric connects the e500 core, SEC engine, and peripherals through a multilayer bus matrix, sustaining multi-gigabit data throughput while keeping interrupt latency bounded for real-time protocol stacks.
Typical applications include IP networking routers and switches, industrial control and factory automation controllers, LTE/4G small-cell base stations, secure VPN gateways, and network-attached storage controllers. The integration density reduces BOM count versus discrete CPU + PHY designs, while the industrial temperature rating supports outdoor and harsh-environment deployments.
When designing with this device, allocate generous copper area beneath the FCBGA thermal lid and use a minimum 8-layer PCB stackup to route the DDR3 matched-length groups. The SERDES reference clock must be supplied with sub-100 ps jitter to meet PCIe and SATA compliance margins.
This page synthesizes distributor pricing, parameter verification against the NXP datasheet, and design considerations not duplicated in the manufacturer brief - engineers can evaluate fit, identify same-package alternatives, and source authorized stock in one view.
Mga alternatibo na pwedeng ilagay na MPC8536CVTAVLA557 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok MPC8536CVTAVLA557 (parehas na form factor at footprint) — pagkakaiba sa Ethernet, Memory Controller, Mounting Type, PCIe, Package.
MPC8536CVTANGA
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MPC8536CVTAQGA
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MPC8536EAVTAVLA
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →MPC8536CVTAVLA
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MPC8535CVTAQGA
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MPC8536CVTAVLA557 Mga Pinakamataas na Rating at Electrical Characteristics
| Processor Type | MPC85xx PowerQUICC III 32-Bit |
| Core | PowerPC e500, 1 Core |
| Core Architecture | Power Architecture Book E |
| Operating Frequency | 1.5 GHz |
| Core Supply Voltage | 1.1 V |
| Packhaging | 783-FCBGA (29x29 mm) |
| Memory Controller | DDR2/DDR3 with ECC |
| Ethernet | 4x Gigabit (SGMII/RGMII) |
| PCIe | 2x PCIe controllers |
| SATA | 2x SATA 2.0 |
| USB | USB 2.0 |
| Storage | SDHC |
| Security Engine | SEC 3.x (crypto acceleration) |
| Temperature na Operasyon | -40C to +105C (extended) |
| Uri ng Pagpapasok | Surface Mount, BGA |
| Lead Free | Yes |
Gabay sa Pin Configuration ng MPC8536CVTAVLA557 783-fcbga (29x29 mm)
Pin configuration para sa MPC8536CVTAVLA557 (783-fcbga (29x29 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa MPC8536CVTAVLA557.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
MPC8536CVTAVLA557 ay nararapat para sa 6 aplikasyons: IP Networking Router / Switch, LTE / 4G Small-Cell Base Station, Industrial Automation Controller, Secure VPN Gateway, Network-Attached Storage Controller, Edge Compute Gateway.
IP Networking Router / Switch
The MPC8536CVTAVLA557 fits IP networking routers and switches because it combines a 1.5 GHz e500 core with four Gigabit Ethernet MACs, dual PCIe controllers, and hardware SEC 3.x encryption acceleration in one 783-FCBGA. The DDR3 controller with ECC sustains multi-gigabit packet throughput, while the SEC engine sustains IPsec/SSL line-rate without software bottlenecks. Place the SoC on an 8-layer PCB with matched-length SERDES routing to PCIe and SGMII PHYs; unlike discrete CPU + switch ASIC designs, the integrated fabric cuts BOM cost and inter-chip latency.
Inirekomenda
LTE / 4G Small-Cell Base Station
Small-cell base stations require deterministic packet processing at multi-gigabit rates with industrial-temperature tolerance, and the MPC8536CVTAVLA557 delivers both at 1.5 GHz with a -40C to +105C rating. The DDR3 controller feeds real-time baseband buffers, while dual PCIe lanes connect to RF front-end cards and dual SATA ports handle local logging. The SEC engine secures backhaul IPsec tunnels at line rate. Use a heatsink under the FCBGA lid and an 8-layer PCB; the integrated peripherals eliminate the co-processor typically needed alongside a discrete CPU.
Inirekomenda
Industrial Automation Controller
Factory automation controllers need deterministic real-time response, wide temperature range, and industrial bus connectivity - the MPC8536CVTAVLA557 meets all three with its e500 core, extended -40C to +105C operation, and PCI/PCIe host ports. The dual PCIe lanes connect to industrial Ethernet or fieldbus cards, while the SEC engine secures OT traffic. Industrial-grade operation requires the AVLA temperature bin; commercial parts will fail thermal-cycling validation. The 783-FCBGA needs an 8-layer stackup with thermal via arrays under the lid for sustained 1.5 GHz operation.
Inirekomenda
Secure VPN Gateway
VPN gateways need sustained IPsec/SSL throughput at multi-gigabit rates - the MPC8536CVTAVLA557 integrates the SEC 3.x crypto engine that offloads AES, 3DES, SHA, and RSA from the e500 core. Four GbE MACs segment WAN/LAN/DMZ zones, while DDR3 with ECC protects key material integrity. Compared with software-only crypto on a general-purpose CPU, the integrated SEC sustains 2-3x higher tunnel counts at the same 1.5 GHz clock. Place near tamper-detection logic and route DDR3 with matched impedance for signal integrity.
Inirekomenda
Network-Attached Storage Controller
NAS controllers benefit from the MPC8536CVTAVLA557's dual SATA 2.0 ports, USB 2.0, and GbE MACs - enough to build a 2-bay RAID-1 appliance without a companion storage ASIC. The 1.5 GHz e500 core runs NFS/SMB/iSCSI stacks, while DDR3 with ECC protects against bit-flip on large file transfers. Industrial temperature rating supports deployment in unconditioned wiring closets. Add eMMC or NOR via local bus for boot; the integrated peripherals beat discrete CPU + SATA bridge designs on cost and latency.
Inirekomenda
Edge Compute Gateway
Edge gateways aggregate sensor data and run analytics at the network edge; the MPC8536CVTAVLA557 supports this with a 1.5 GHz e500 core, GbE uplinks, and industrial temperature operation. Dual PCIe lanes accept AI accelerator cards for inference, while SEC 3.x secures device-to-cloud links. The DDR3 controller with ECC ensures reliable operation in 24/7 deployments. Unlike Raspberry-class SoCs, this part is rated for harsh industrial environments and supports deterministic PCIe latency for time-sensitive networking.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for MPC8536CVTAVLA557 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | MPC8536CVTANGA | MPC8536CVTAQGA | MPC8536EAVTAVLA | MPC8536CVTAVLA | MPC8535CVTAQGA |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 783-FCBGA (29x29) | 783-FCBGA (29x29) - same | 783-FCBGA (29x29) - same | 783-FCBGA (29x29) - same | 783-FCBGA (29x29) - same | 783-FCBGA (29x29) - same |
| Core Frequency | 1.5 GHz | 1.5 GHz | 1.5 GHz | 1.5 GHz | 1.5 GHz | 1.5 GHz |
| Operating Temperature | -40C to +105C (extended) | -40C to +105C | 0C to +70C (commercial) | -40C to +105C | -40C to +105C | 0C to +70C (commercial) |
| Memory Controller | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC | DDR2 only |
| SATA Ports | 2x SATA 2.0 | 2x SATA 2.0 | 2x SATA 2.0 | 2x SATA 2.0 | 2x SATA 2.0 | 0 (no SATA) |
| Security Engine | SEC 3.x | SEC 3.x | SEC 3.x | SEC 3.x (enhanced) | SEC 3.x | SEC 3.x |
| Core Supply Voltage | 1.1 V | 1.1 V | 1.1 V | 1.1 V | 1.1 V | 1.1 V |
Pangunahing mga Pagkakaiba
- Industrial extended temperature bin (kumpara saMPC8536CVTAQGA)
- DDR3 with ECC memory controller (kumpara saMPC8535CVTAQGA)
- Dual SATA 2.0 ports on-die (kumpara saMPC8535CVTAQGA)
Talaan ng Disenyo
Estimated: at 1.5 GHz with all SerDes lanes active and 1.1 V core, the MPC8536CVTAVLA557 dissipates approximately 8-12 W depending on peripheral loading. The 783-FCBGA requires a thermal via array directly under the lid (at least 0.3 mm drill, 1.2 mm pitch, 4x4 minimum array) connected to an inner copper pour. Without this, junction temperature can exceed +105C and trigger thermal shutdown in sealed enclosures.
Use a minimum 8-layer PCB stackup with stripline routing for DDR3 and SERDES signals. DDR3 address/command traces must be matched within +/- 25 ps; SERDES differential pairs within +/- 10 ps. The 29x29 mm FCBGA needs 0.8 mm ball pitch with NSMD land pads per IPC-7091. Reference the NXP AN4398 hardware design guide for complete layout rules before tape-out.
Power sequencing must follow the NXP MPC8536 datasheet: 1.0 V core must rise before 1.5 V/1.8 V I/O supplies with monotonic edges; violating this can trigger internal latch-up. The SerDes reference clock must have sub-100 ps RMS jitter or PCIe/SATA compliance testing will fail. Always read the security engine fuse settings via JTAG before locking the part for production.
Impormasyon ng Pagsunod sa Kautusan
RoHS and lead-free confirmed per NXP product page and Digi-Key distributor data. AEC-Q100 not applicable - this is a networking/industrial processor, not an automotive-grade part. REACH compliance per NXP environmental datasheet.