MPC8536CVTAVLA557 - PowerQUICC III SoC 1.5GHz 783-FCPBGA | NXP
MPN: MPC8536CVTAVLA557 ✓ Hoạt độngMPC8536CVTAVLA557 Tóm tắt
What is a PowerQUICC III SoC? The PowerQUICC III family is NXP's line of integrated communications processors that combine a PowerPC host core with specialized communications engines. In the broader taxonomy, MPC8536 sits within PowerPC microprocessors -> embedded processors -> microcontrollers and MPUs -> integrated circuits. PowerQUICC III is engineered for protocol termination, packet processing, and routing in networking and storage equipment, enabling OEMs to consolidate multiple discrete components into a single chip.
Key features include the e500 core with MMU and double-precision FPU, hardware encryption acceleration options (Security Engine), four GbE MACs with SGMII support, dual PCIe controllers, two SATA 2.0 ports, USB 2.0, and a high-bandwidth DDR2/DDR3 SDRAM controller with ECC. The 783-FCPBGA package exposes extensive parallel I/O and multiple high-speed SerDes lanes for flexible board-level integration in line cards, base stations, and industrial control systems.
The MPC8536CVTAVLA557 uses a 32-bit Power Architecture Book E implementation with out-of-order execution capability and superscalar dispatch. Its coherency fabric connects the e500 core, SEC engine, and peripherals through a multilayer bus matrix, sustaining multi-gigabit data throughput while keeping interrupt latency bounded for real-time protocol stacks.
Typical applications include IP networking routers and switches, industrial control and factory automation controllers, LTE/4G small-cell base stations, secure VPN gateways, and network-attached storage controllers. The integration density reduces BOM count versus discrete CPU + PHY designs, while the industrial temperature rating supports outdoor and harsh-environment deployments.
When designing with this device, allocate generous copper area beneath the FCBGA thermal lid and use a minimum 8-layer PCB stackup to route the DDR3 matched-length groups. The SERDES reference clock must be supplied with sub-100 ps jitter to meet PCIe and SATA compliance margins.
This page synthesizes distributor pricing, parameter verification against the NXP datasheet, and design considerations not duplicated in the manufacturer brief - engineers can evaluate fit, identify same-package alternatives, and source authorized stock in one view.
Bộ thay thế dễ dàng lắp đặt cho MPC8536CVTAVLA557 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MPC8536CVTAVLA557 (cùng hình factor và footprint) — khác nhau ở Ethernet, Memory Controller, Mounting Type, PCIe, Package.
MPC8536CVTANGA
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MPC8536CVTAQGA
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MPC8536EAVTAVLA
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MPC8536CVTAVLA
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MPC8535CVTAQGA
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MPC8536CVTAVLA557 Tỷ lệ tối đa & tính chất điện
| Processor Type | MPC85xx PowerQUICC III 32-Bit |
| Core | PowerPC e500, 1 Core |
| Core Architecture | Power Architecture Book E |
| Operating Frequency | 1.5 GHz |
| Core Supply Voltage | 1.1 V |
| Hộp | 783-FCBGA (29x29 mm) |
| Memory Controller | DDR2/DDR3 with ECC |
| Ethernet | 4x Gigabit (SGMII/RGMII) |
| PCIe | 2x PCIe controllers |
| SATA | 2x SATA 2.0 |
| USB | USB 2.0 |
| Storage | SDHC |
| Security Engine | SEC 3.x (crypto acceleration) |
| Nhiệt độ hoạt động | -40C to +105C (extended) |
| Kiểu lắp đặt | Surface Mount, BGA |
| Lead Free | Yes |
Hướng dẫn cấu hình chân MPC8536CVTAVLA557 783-fcbga (29x29 mm)
Cấu hình chân cho MPC8536CVTAVLA557 (783-fcbga (29x29 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho MPC8536CVTAVLA557.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MPC8536CVTAVLA557 phù hợp cho 6 Áp dụngs: IP Networking Router / Switch, LTE / 4G Small-Cell Base Station, Industrial Automation Controller, Secure VPN Gateway, Network-Attached Storage Controller, Edge Compute Gateway.
IP Networking Router / Switch
The MPC8536CVTAVLA557 fits IP networking routers and switches because it combines a 1.5 GHz e500 core with four Gigabit Ethernet MACs, dual PCIe controllers, and hardware SEC 3.x encryption acceleration in one 783-FCBGA. The DDR3 controller with ECC sustains multi-gigabit packet throughput, while the SEC engine sustains IPsec/SSL line-rate without software bottlenecks. Place the SoC on an 8-layer PCB with matched-length SERDES routing to PCIe and SGMII PHYs; unlike discrete CPU + switch ASIC designs, the integrated fabric cuts BOM cost and inter-chip latency.
Được đề xuất
LTE / 4G Small-Cell Base Station
Small-cell base stations require deterministic packet processing at multi-gigabit rates with industrial-temperature tolerance, and the MPC8536CVTAVLA557 delivers both at 1.5 GHz with a -40C to +105C rating. The DDR3 controller feeds real-time baseband buffers, while dual PCIe lanes connect to RF front-end cards and dual SATA ports handle local logging. The SEC engine secures backhaul IPsec tunnels at line rate. Use a heatsink under the FCBGA lid and an 8-layer PCB; the integrated peripherals eliminate the co-processor typically needed alongside a discrete CPU.
Được đề xuất
Industrial Automation Controller
Factory automation controllers need deterministic real-time response, wide temperature range, and industrial bus connectivity - the MPC8536CVTAVLA557 meets all three with its e500 core, extended -40C to +105C operation, and PCI/PCIe host ports. The dual PCIe lanes connect to industrial Ethernet or fieldbus cards, while the SEC engine secures OT traffic. Industrial-grade operation requires the AVLA temperature bin; commercial parts will fail thermal-cycling validation. The 783-FCBGA needs an 8-layer stackup with thermal via arrays under the lid for sustained 1.5 GHz operation.
Được đề xuất
Secure VPN Gateway
VPN gateways need sustained IPsec/SSL throughput at multi-gigabit rates - the MPC8536CVTAVLA557 integrates the SEC 3.x crypto engine that offloads AES, 3DES, SHA, and RSA from the e500 core. Four GbE MACs segment WAN/LAN/DMZ zones, while DDR3 with ECC protects key material integrity. Compared with software-only crypto on a general-purpose CPU, the integrated SEC sustains 2-3x higher tunnel counts at the same 1.5 GHz clock. Place near tamper-detection logic and route DDR3 with matched impedance for signal integrity.
Được đề xuất
Network-Attached Storage Controller
NAS controllers benefit from the MPC8536CVTAVLA557's dual SATA 2.0 ports, USB 2.0, and GbE MACs - enough to build a 2-bay RAID-1 appliance without a companion storage ASIC. The 1.5 GHz e500 core runs NFS/SMB/iSCSI stacks, while DDR3 with ECC protects against bit-flip on large file transfers. Industrial temperature rating supports deployment in unconditioned wiring closets. Add eMMC or NOR via local bus for boot; the integrated peripherals beat discrete CPU + SATA bridge designs on cost and latency.
Được đề xuất
Edge Compute Gateway
Edge gateways aggregate sensor data and run analytics at the network edge; the MPC8536CVTAVLA557 supports this with a 1.5 GHz e500 core, GbE uplinks, and industrial temperature operation. Dual PCIe lanes accept AI accelerator cards for inference, while SEC 3.x secures device-to-cloud links. The DDR3 controller with ECC ensures reliable operation in 24/7 deployments. Unlike Raspberry-class SoCs, this part is rated for harsh industrial environments and supports deterministic PCIe latency for time-sensitive networking.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MPC8536CVTAVLA557 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MPC8536CVTANGA | MPC8536CVTAQGA | MPC8536EAVTAVLA | MPC8536CVTAVLA | MPC8535CVTAQGA |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 783-FCBGA (29x29) | 783-FCBGA (29x29) - same | 783-FCBGA (29x29) - same | 783-FCBGA (29x29) - same | 783-FCBGA (29x29) - same | 783-FCBGA (29x29) - same |
| Core Frequency | 1.5 GHz | 1.5 GHz | 1.5 GHz | 1.5 GHz | 1.5 GHz | 1.5 GHz |
| Operating Temperature | -40C to +105C (extended) | -40C to +105C | 0C to +70C (commercial) | -40C to +105C | -40C to +105C | 0C to +70C (commercial) |
| Memory Controller | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC | DDR2 only |
| SATA Ports | 2x SATA 2.0 | 2x SATA 2.0 | 2x SATA 2.0 | 2x SATA 2.0 | 2x SATA 2.0 | 0 (no SATA) |
| Security Engine | SEC 3.x | SEC 3.x | SEC 3.x | SEC 3.x (enhanced) | SEC 3.x | SEC 3.x |
| Core Supply Voltage | 1.1 V | 1.1 V | 1.1 V | 1.1 V | 1.1 V | 1.1 V |
Bảo phân biệt quan trọng
- Industrial extended temperature bin (vsMPC8536CVTAQGA)
- DDR3 with ECC memory controller (vsMPC8535CVTAQGA)
- Dual SATA 2.0 ports on-die (vsMPC8535CVTAQGA)
Ghi chú thiết kế
Estimated: at 1.5 GHz with all SerDes lanes active and 1.1 V core, the MPC8536CVTAVLA557 dissipates approximately 8-12 W depending on peripheral loading. The 783-FCBGA requires a thermal via array directly under the lid (at least 0.3 mm drill, 1.2 mm pitch, 4x4 minimum array) connected to an inner copper pour. Without this, junction temperature can exceed +105C and trigger thermal shutdown in sealed enclosures.
Use a minimum 8-layer PCB stackup with stripline routing for DDR3 and SERDES signals. DDR3 address/command traces must be matched within +/- 25 ps; SERDES differential pairs within +/- 10 ps. The 29x29 mm FCBGA needs 0.8 mm ball pitch with NSMD land pads per IPC-7091. Reference the NXP AN4398 hardware design guide for complete layout rules before tape-out.
Power sequencing must follow the NXP MPC8536 datasheet: 1.0 V core must rise before 1.5 V/1.8 V I/O supplies with monotonic edges; violating this can trigger internal latch-up. The SerDes reference clock must have sub-100 ps RMS jitter or PCIe/SATA compliance testing will fail. Always read the security engine fuse settings via JTAG before locking the part for production.
Thông tin tuân thủ
RoHS and lead-free confirmed per NXP product page and Digi-Key distributor data. AEC-Q100 not applicable - this is a networking/industrial processor, not an automotive-grade part. REACH compliance per NXP environmental datasheet.