MPC8572LVJAULE - 1.333GHz Dual-Core PowerQUICC III MPU | NXP
MPN: MPC8572LVJAULE ✓ NakahandaMPC8572LVJAULE Ulas
A microprocessor unit (MPU) is the central processing unit of an embedded computing system, integrating CPU cores, caches, memory controllers, and high-speed peripherals on a single die. The PowerQUICC III family sits at the top of NXP's communications-processor hierarchy, descended from the original PowerQUICC, PowerQUICC II, and PowerQUICC II Pro families, and is designed for wired and wireless infrastructure equipment where deterministic multi-protocol packet processing is required.
Key features of the MPC8572LVJAULE include 1.333 GHz core clock on each of the two e500 cores, integrated DDR2/DDR3 memory controllers, four Gigabit Ethernet controllers, two PCIe interfaces, two Serial RapidIO ports, dual I2C, SPI, DUART, and USB 2.0, plus an integrated security engine. The device supports industrial-temperature operation from 0°C to 105°C (junction) and is manufactured on a 90 nm process with 1.8V/2.5V/3.3V I/O supply rails.
Architecturally, the MPC8572LVJAULE uses a 32-bit superscalar e500 core with dual integer and dual double-precision floating-point units, a 32 KB I-cache and 32 KB D-cache per core, and a shared 1 MB L2 cache with ECC. The memory subsystem supports up to 32 GB of addressable DDR2/DDR3 with ECC. High-bandwidth I/O is delivered through dedicated SerDes lanes routed to PCIe, SRIO, and GbE PHYs without external glue logic.
Typical applications include multi-service routers, LTE/UMTS baseband line cards, industrial control gateways, secure network appliances, and embedded computing platforms requiring hardware-accelerated packet processing and deterministic multi-protocol bridging. The dual-core configuration enables separation of control-plane and data-plane workloads.
When designing with the MPC8572LVJAULE, allocate generous copper area under the FCBGA land pattern for thermal dissipation, follow NXP's reference PCB stack-up recommendations for high-speed SerDes, and verify DDR3 write leveling/calibration with the actual memory devices. Use NXP's CodeWarrior development suite for bring-up.
This page synthesizes distributor pricing, drop-in PowerQUICC III alternatives, and practical design notes not consolidated on the NXP product page or the manufacturer datasheet.
Mga alternatibo na pwedeng ilagay na MPC8572LVJAULE — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
MPC8572EVJAULE
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MPC8572CLVJAULE
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MPC8572LVJAULD
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MPC8572ELVJAULE
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
MPC8572VJAULE
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
MPC8572LVJAULE Mga Pinakamataas na Rating at Electrical Characteristics
| Core Architecture | PowerPC e500 |
| Number of Cores | 2 |
| Width ng Data Bus | 32-bit |
| Core Clock Speed | 1.333 GHz |
| Co-Processors / DSP | Signal Processing; SPE |
| Memory Controller | DDR2 / DDR3 |
| Ethernet | Gigabit Ethernet (4x) |
| High-Speed Serial I/O | PCIe, Serial RapidIO (SRIO) |
| Graphics Acceleration | No |
| I/O Voltage | 1.8 V / 2.5 V / 3.3 V |
| Packhaging | 1023-FCBGA (33x33 mm) |
| Uri ng Pagpapasok | Surface Mount (BGA) |
| Temperature na Operasyon | 0 °C to 105 °C |
| Process Technology | 90 nm CMOS |
| MSL (Moisture Sensitivity Level) | 3 |
| Peak Reflow Temperature | 245 °C (max 30 s) |
| Terminal Finish | Tin-Silver (SnAg) |
| Series | MPC85xx / PowerQUICC III |
| JEDEC JESD-609 Code | e2 |
| Tindminan RoHS | Compliant (per Heisener listing) |
Gabay sa Pin Configuration ng MPC8572LVJAULE 1023-fcbga (33x33 mm)
Pin configuration para sa MPC8572LVJAULE (1023-fcbga (33x33 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa MPC8572LVJAULE.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
MPC8572LVJAULE ay nararapat para sa 7 aplikasyons: Multi-Service Router Line Card, LTE / UMTS Baseband Processing, Industrial Control Gateway, Secure Network Appliance, Embedded Computing Platform, Wireless Backhaul Aggregation, Storage Controller / NAS Bridge.
Multi-Service Router Line Card
The MPC8572LVJAULE's dual PowerPC e500 cores at 1.333 GHz run separate data-plane (packet forwarding via SRIO/GbE) and control-plane (routing protocols, OAM, CLI) tasks in parallel. The integrated four-port Gigabit Ethernet and two SRIO lanes enable direct attach to switch fabrics without external PHYs. Compared to a single-core design, the dual-core topology doubles control-plane throughput while leaving headroom for QoS shaping, ACL lookups, and traffic management on the data-plane core. DDR3 with ECC ensures reliable memory operations at line-rate forwarding loads.
Inirekomenda
LTE / UMTS Baseband Processing
The MPC8572LVJAULE's dual-core e500 architecture with on-chip SPE signal-processing extensions is well-suited to LTE Layer-1 baseband, channel coding, and HARQ control. PCIe links attach directly to a baseband FPGA or radio card, while four GbE ports backhaul to the baseband pool. The DDR2/DDR3 controller with ECC sustains the high memory bandwidth required by turbo decoding and FFT operations. The 1023-FCBGA package provides sufficient I/O for multi-RAT radio heads and the 0-105 °C temperature range suits outdoor base-station enclosures.
Inirekomenda
Industrial Control Gateway
The MPC8572LVJAULE's deterministic e500 cores and PCIe/SRIO/GbE mix make it an ideal control gateway between industrial Ethernet fieldbuses and enterprise backhaul. The dual cores isolate time-critical industrial protocols (PROFINET, EtherCAT) from non-real-time SCADA/management traffic. DDR3 with ECC provides robust memory operation in noisy factory environments, while the FCBGA package's industrial temperature rating (0-105 °C) handles the wide thermal range of control cabinets. NXP's CodeWarrior IDE streamlines deterministic real-time software development.
Inirekomenda
Secure Network Appliance
For VPN gateways, firewalls, and IPS/IDS appliances, the MPC8572EVJAULE (or MPC8572ELVJAULE with security engine) provides hardware-accelerated encryption that the plain MPC8572LVJAULE does not. Even without the E variant, the dual e500 cores can run software cryptography plus full packet inspection in parallel. The four GbE ports support WAN/LAN/DMZ segmentation, while PCIe provides a path to external crypto accelerators or 10 GbE uplinks. DDR3 ECC ensures memory integrity under sustained deep-packet-inspection workloads.
Inirekomenda
Embedded Computing Platform
In VME or VPX-based embedded computing systems, the MPC8572LVJAULE serves as a CPU payload board controller with dual e500 cores handling real-time operating-system tasks (VxWorks, INTEGRITY) plus housekeeping I/O via DUART, I2C, and SPI. The PCIe and SRIO links connect to neighbouring payload cards on the backplane with deterministic latency. The 1023-FCBGA package's high I/O count exposes all peripherals while the 1.333 GHz clock provides ample headroom for high-rate data acquisition flows on the same payload.
Inirekomenda
Wireless Backhaul Aggregation
The MPC8572LVJAULE aggregates traffic from multiple microwave/PtP backhaul links via its four GbE ports and routes them upstream over SRIO or PCIe. Dual e500 cores let one core run link-aggregation protocols (LACP, MLAG) while the other handles QoS policing and shaping. The DDR3 controller sustains high-bandwidth buffering during peak aggregation. Compared to discrete CPU + switch designs, the integrated architecture reduces BOM cost and PCB area in compact street-cabinet backhaul units.
Inirekomenda
Storage Controller / NAS Bridge
The MPC8572LVJAULE can serve as a NAS bridge controller, using PCIe to attach to a RAID/HBA card, GbE for host connectivity, and the dual e500 cores to run a storage OS (Linux with iSCSI or NFS targets). DDR3 ECC protects against silent data corruption in write-back cache operations. SRIO enables direct attach to a high-availability peer controller for clustering. The industrial temperature grade suits unattended edge-storage deployments in factory floors or remote sites.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for MPC8572LVJAULE — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | MPC8572EVJAULE | MPC8572CLVJAULE | MPC8572LVJAULD | MPC8572ELVJAULE | MPC8572VJAULE |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 1023-FCBGA (33x33 mm) | 1023-FCBGA (33x33 mm) - same | 1023-FCBGA (33x33 mm) - same | 1023-FCBGA (33x33 mm) - same | 1023-FCBGA (33x33 mm) - same | 1023-FCBGA (33x33 mm) - same |
| Core Architecture | 2x PowerPC e500 | 2x PowerPC e500 + security engine | 2x PowerPC e500 (lower speed grade) | 2x PowerPC e500 | 2x PowerPC e500 + security engine | 2x PowerPC e500 |
| Core Clock | 1.333 GHz | 1.333 GHz | 1.0 GHz (lower grade) | 1.333 GHz | 1.333 GHz | 1.333 GHz |
| Memory Controller | DDR2 / DDR3 | DDR2 / DDR3 | DDR2 / DDR3 | DDR2 / DDR3 | DDR2 / DDR3 | DDR2 / DDR3 |
| Gigabit Ethernet | 4 ports | 4 ports | 4 ports | 4 ports | 4 ports | 4 ports |
| PCIe / SRIO Lanes | 2x PCIe + 2x SRIO | 2x PCIe + 2x SRIO | 2x PCIe + 2x SRIO | 2x PCIe + 2x SRIO | 2x PCIe + 2x SRIO | 2x PCIe + 2x SRIO |
| Security Engine | No | Yes | No | No | Yes | No |
| Series | MPC85xx / PowerQUICC III | MPC85xx / PowerQUICC III | MPC85xx / PowerQUICC III | MPC85xx / PowerQUICC III | MPC85xx / PowerQUICC III | MPC85xx / PowerQUICC III |
Pangunahing mga Pagkakaiba
- Dual-core e500 at 1.333 GHz in 1023-FCBGA with DDR2/DDR3 + 4 GbE + PCIe + SRIO integrated (kumpara saMPC8548EVJAUJD)
- Optional security engine without package change (kumpara saMPC8572CLVJAULE)
- Higher I/O integration vs competing QorIQ entry parts (kumpara saP1020)
- Long-lifecycle PowerQUICC III silicon (kumpara saGeneric ARM SoC)
Talaan ng Disenyo
Estimated: the 1023-FCBGA package has limited exposed die area for top-side cooling. For typical 1.333 GHz dual-core operation at 1.8V/2.5V/3.3V, expect 6-8W package dissipation. Provide a thermal pad connection to an inner copper plane with at least 9 thermal vias (0.3 mm drill, 1.0 mm pitch) under the die shadow, and consider a low-profile heatsink for fan-less enclosure designs above 4-5W total power. Maintain junction temperature below 105 °C.
Use a high-layer-count stack-up (minimum 8 layers) with dedicated ground and power planes adjacent to the outer signal layers. Route SerDes differential pairs (PCIe, SRIO) with 85 ohm differential impedance and length matching within 5 mils per NXP layout guidelines. Place the DDR3 memory devices on the same side as the FCBGA, within 5 cm of the package, with matched routing for byte-lane signals.
Do not rely on the default DDR3 calibration; perform write-leveling at production thermal corners. The SerDes reference clock must be within +/- 100 ppm of the NXP-referenced frequency for PCIe/SRIO link-up. Boot configuration resistors on the cfg pins must match the chosen boot source (NOR flash, NAND flash, I2C EEPROM) - a common bring-up failure is incorrect cfg pull-up/pull-down values.
Keep noisy digital signals (DDR, SerDes) at least 3 mm from analog signals on the same PCB layer. Decoupling must include 0.1 uF X7R caps within 2 mm of each power pin plus bulk 10 uF X5R near the package. Use split analog/digital power domains with ferrite-bead isolation if mixing sensitive analog with the FCBGA's digital switching noise.
Series SRIO links are particularly sensitive to inter-symbol interference; validate eye-mask compliance at the receiver with the actual board stack-up and SerDes pre-emphasis/de-emphasis settings. PCIe Gen1/Gen2 endpoints may require CTLE adaptation; use NXP's SerDes configuration tool rather than generic PHY defaults.
Impormasyon ng Pagsunod sa Kautusan
RoHS compliance inferred from Tin-Silver (SnAg) finish and JESD-609 Code e2 per Heisener and Vyrian listings reviewed 2026-10-17. AEC-Q100 not applicable (industrial communications MPU, not automotive). Halogen-free status not stated in Verified Web Data.