MPC860PCVR50D4 - PowerQUICC 32-Bit MPU, 50MHz, 357-BGA | NXP
MPN: MPC860PCVR50D4 ✗ Tapus ng BuhayMPC860PCVR50D4 Ulas
A PowerQUICC (pronounced "power-quick") is an integrated communications microprocessor that combines a PowerPC processor core with system integration units (SIU), a memory controller, and communications-specific peripherals such as serial channels, a Fast Ethernet MAC, and a CPM (Communications Processor Module). The MPC8xx family sits in the hierarchy MPU -> microprocessor -> embedded processor -> integrated circuit, designed primarily for networking and telecom infrastructure where deterministic peripheral handling matters.
Key features of the MPC860PCVR50D4 include the PowerPC core running at 50 MHz, the CPM for offloading communications tasks, a 32-bit data path, an integrated Fast Ethernet MAC, multiple serial communications controllers (SCCs), and a flexible memory controller supporting DRAM, SRAM, Flash, and ROM. The device is built on a 0.32-micron process and supports industrial operating temperature range.
Typical applications include 10/100 Mbps Ethernet routers and bridges, DSLAM line cards, ISDN terminal adapters, industrial control with networking, and legacy telecom equipment. The integrated peripherals reduce BOM cost and board area compared to discrete MPU-plus-comm-controller designs.
When designing with this MPU, allocate sufficient PCB area for the 357-ball BGA fanout and follow NXP's recommended decoupling scheme. Because the part is in End of Life, plan long-term production carefully or evaluate the MPC860SAR (successor) family.
Mga alternatibo na pwedeng ilagay na MPC860PCVR50D4 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok MPC860PCVR50D4 (parehas na form factor at footprint) — pagkakaiba sa Core Architecture, Process Technology, RoHS Status, Mounting Type, Package.
MPC860PCZQ50D4
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →MPC860PVR80D4
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MPC860ENCVR50D4
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →MPC860TCZQ50D4
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →MPC860SARVR50B
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
TSPC860MHMZPU50C1
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MPC860PCVR50D4 Mga Pinakamataas na Rating at Electrical Characteristics
| Processor Family | MPC8xx PowerQUICC |
| Core Architecture | PowerPC 32-bit |
| Number of Cores | 1 |
| Operating Frequency | 50 MHz |
| Volte ng Pagbibigay | 3.3 V |
| Process Technology | 0.32 um CMOS |
| Packhaging | 357-PBGA (25x25 mm) |
| Uri ng Pagpapasok | Surface Mount |
| Packaging | Tray |
| Lead Free Status | Lead Free |
| Tindminan RoHS | RoHS Compliant |
| Integrated Ethernet MAC | Yes (Fast Ethernet 10/100) |
| Memory Controller | Yes (DRAM/SRAM/Flash/ROM) |
| Communications Processor Module (CPM) | Yes |
Gabay sa Pin Configuration ng MPC860PCVR50D4 357-pbga (25x25 mm)
Pin configuration para sa MPC860PCVR50D4 (357-pbga (25x25 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa MPC860PCVR50D4.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
MPC860PCVR50D4 ay nararapat para sa 6 aplikasyons: 10/100 Mbps Ethernet Router, DSLAM Line Card Controller, ISDN Terminal Adapter, Industrial Control Gateway, Legacy Telecom Equipment, Embedded Networking Print Server.
10/100 Mbps Ethernet Router
The MPC860PCVR50D4's integrated Fast Ethernet MAC and CPM offload make it ideal for low-port-count routers in legacy telecom and small-office networks. With 50 MHz PowerPC core performance and SCC/SMC channels for WAN serial links, the part can handle a 10/100 Mbps Ethernet LAN plus a single T1/E1 WAN interface without external peripherals. Placed as the system MPU with 16-32 MB DRAM and 4-8 MB Flash, it runs an embedded routing stack (e.g., pSOS+, VxWorks) at line rate. Unlike newer SoCs, it lacks gigabit support, so it targets edge router and bridge applications specifically.
Inirekomenda
DSLAM Line Card Controller
The MPC860PCVR50D4 suits DSLAM line card designs where deterministic serial communications and an integrated Ethernet MAC combine to simplify line termination. The CPM handles ATM cell processing or PPP/HDLC framing while the PowerPC core manages higher-layer protocols. Operating at 3.3 V with industrial temperature support, it integrates cleanly into CO (central office) equipment. Placed alongside a DSL PHY and line driver, it terminates subscriber lines and aggregates traffic onto the uplink. Compared to discrete MPU-plus-CPE designs, this integrated part reduces BOM cost and PCB area substantially.
Inirekomenda
ISDN Terminal Adapter
The MPC860PCVR50D4's serial communications controllers and integrated memory controller make it well-suited for ISDN terminal adapters bridging BRI/PRI interfaces to Ethernet or USB hosts. The CPM manages HDLC framing on the ISDN D-channel while SCCs handle B-channel data; the PowerPC core runs the upper-layer call control and routing logic. Operating from 3.3 V with the 357-BGA package, it fits compact adapter enclosures. Placed between the ISDN transceiver (e.g., Si3034) and an Ethernet PHY, it delivers reliable multi-channel ISDN connectivity. Compared to newer SoCs, it offers the legacy interfaces that ISDN deployments still require.
Inirekomenda
Industrial Control Gateway
The MPC860PCVR50D4 supports industrial control gateways that bridge fieldbus networks (Modbus, Profibus) to Ethernet. The combination of PowerPC core, multiple SCCs for fieldbus, integrated Ethernet MAC, and memory controller provides a single-chip solution. Industrial temperature variants (suffix Z) handle factory-floor conditions. Placed as the central processor with isolated RS-485 transceivers and an Ethernet PHY, it converts fieldbus traffic to TCP/IP for SCADA systems. Unlike newer Cortex-M gateways, it offers higher throughput for multi-protocol aggregation and proven long-term reliability in industrial environments.
Inirekomenda
Legacy Telecom Equipment
The MPC860PCVR50D4 was widely deployed in legacy telecom equipment including PBX systems, voice-over-IP gateways, and T1/E1 multiplexers. Its deterministic CPM-based peripheral handling and proven software ecosystem (pSOS+, VxWorks, Nucleus) make it ideal for maintaining these installations. Operating from 3.3 V with the 357-PBGA package, it integrates cleanly with T1/E1 framer ICs (e.g., DS2155) and SLICs. Placed as the central call processor, it handles signaling, switching, and call routing functions. Compared to newer SoCs, it preserves investment in existing telecom software stacks and regulatory certifications.
Inirekomenda
Embedded Networking Print Server
The MPC860PCVR50D4 integrates all peripherals needed for an embedded print server: Ethernet MAC for network connectivity, SCCs for parallel-port or serial-port printer interfaces, and a memory controller for DRAM/Flash storage. At 50 MHz, it handles TCP/IP stack, job queuing, and protocol translation (LPR, IPP) for small-office printers. Placed alongside a parallel-port transceiver and Ethernet PHY, it converts a USB/parallel printer into a network-connected device. Compared to newer Cortex-A SoCs, it offers a smaller footprint, lower power, and proven reliability for long-lifecycle print server designs.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for MPC860PCVR50D4 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | MPC860PCZQ50D4 | MPC860PVR80D4 | MPC860ENCVR50D4 | TSPC860MHMZPU50C1 |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | e2v technologies |
| Package | 357-PBGA (25x25) | 357-PBGA (25x25) - same | 357-PBGA (25x25) - same | 357-PBGA (25x25) - same | 357-PBGA (25x25) - same |
| Operating Frequency | 50 MHz | 50 MHz | 80 MHz | 50 MHz | 50 MHz |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Core Architecture | PowerPC 32-bit | PowerPC 32-bit | PowerPC 32-bit | PowerPC 32-bit | PowerPC 32-bit |
| Integrated Ethernet MAC | Yes (Fast Ethernet) | Yes (Fast Ethernet) | Yes (Fast Ethernet) | Yes (Fast Ethernet) | Yes (Fast Ethernet) |
| Temperature Grade | Industrial (R suffix) | Extended (Z suffix) | Industrial (R suffix) | Industrial (R suffix) | Extended/Space (e2v) |
| Lifecycle Status | EOL | EOL | EOL | EOL | EOL (e2v) |
| RoHS Compliance | Yes | Yes | Yes | Yes | Yes |
Pangunahing mga Pagkakaiba
- Integrated Fast Ethernet MAC plus CPM in single chip (kumpara saMPC860PVR80D4)
- Industrial temperature grade option in identical package (kumpara saMPC860PCZQ50D4)
- Drop-in compatibility with legacy MPC860 family (kumpara saMPC860SARVR50B)
Talaan ng Disenyo
The 357-PBGA at 25x25 mm requires a 4-6 layer PCB stack-up with microvia (or via-in-pad) technology for clean fanout. Use 0.4 mm pitch trace-and-space rules for breakout, and assign dedicated ground planes under the BGA to reduce inductance on the 3.3 V supply. Decoupling: place 100 nF X7R ceramic caps within 2 mm of each VCC/VSS pair, plus bulk 10-22 uF tantalum or polymer caps near the package edges. Match external memory bus trace lengths to within 25 mils (0.6 mm) to maintain timing margins at 50 MHz.
The MPC860PCVR50D4 dissipates approximately 1.5-2.5 W typical at 50 MHz with all peripherals active, per the MPC860 family datasheet thermal characteristics. The 357-PBGA package theta_JA is approximately 18-22 C/W with proper PCB layout (4-layer with internal ground plane). At industrial temperature range (R suffix, -40 to +85 C ambient), junction temperature should remain below 110 C worst case. For sealed enclosures with limited airflow, add thermal vias under the die-flag and consider attaching a small heatsink to the top of the BGA via thermal interface material.
Three pitfalls are common when designing with the MPC860PCVR50D4. First, the part is in End of Life (EOL) status per NXP's product change notice - new designs should select the MPC860SAR successor or migrate to PowerQUICC II. Second, the 0.32 um CMOS process requires strict power-on sequencing: 3.3 V core must be stable before 5 V tolerant I/O pins are driven. Third, the integrated Ethernet MAC requires a 25 MHz reference clock at the XTAL2 input - do not omit this crystal or use an unreliable oscillator. Plan for long lead times (often 12-26 weeks) on this EOL part.
Impormasyon ng Pagsunod sa Kautusan
RoHS compliant and Lead Free per DigiKey (part 955025) and digchip.com listing. AEC-Q100 not applicable - this is a communications MPU, not an automotive-grade part. REACH status compliant per distributor listings.
