PIC16F687-I/ML - 20MHz 8-Bit Flash MCU | Microchip Technology
MPN: PIC16F687-I/ML ✓ NakahandaPIC16F687-I/ML Ulas
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, digital I/O, timers, and communication peripherals on one device. The PIC16F687 belongs to Microchip's mid-range PIC16 family and uses the x14 instruction architecture. This architecture combines a relatively small instruction set with useful hardware peripherals, allowing economical designs for sensing, control, display, communication, and low-power automation products.
Key features include a 20 MHz maximum operating frequency, 3.5 KB of Flash program memory organized as 2K x 14 words, 128 bytes of data RAM, and 18 I/O pins. The 2.0 V to 5.5 V operating range supports both 3.3 V and 5 V system architectures. Its 20-QFN package has a compact 4x4 mm body, and the industrial-temperature suffix identifies the variant intended for extended-temperature industrial operation.
The device is based on the PIC16 mid-range x14 architecture rather than an ARM Cortex core, so firmware, interrupt handling, peripherals, and toolchain assumptions differ from STM32-class microcontrollers. Its dedicated Flash memory also supports in-circuit reprogramming, which is useful for production programming and field firmware maintenance. On-board EEPROM provides nonvolatile storage for calibration values, configuration data, counters, and serial numbers.
Typical applications include industrial sensor nodes, compact control panels, building-automation equipment, battery-powered instrumentation, motor-control peripherals, LED drivers, and small communications gateways. The combination of 18 I/O pins and a small QFN footprint supports space-constrained boards while retaining enough connections for switches, sensors, displays, and serial interfaces.
PCB design should preserve the manufacturer's recommended decoupling and exposed-pad connection details. Place the primary supply capacitor close to the VDD and VSS connections, route sensitive clock and reset signals away from high-current switching nodes, and program the configuration word for the intended oscillator and brownout conditions. The QFN thermal pad must be connected according to the pin and package instructions rather than treated as an unused pin.
This product page combines the Microchip device characteristics, package identification, sourcing information, and verified same-footprint alternatives with practical guidance for firmware, layout, and selection decisions.
Mga alternatibo na pwedeng ilagay na PIC16F687-I/ML — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok PIC16F687-I/ML (parehas na form factor at footprint) — pagkakaiba sa Package, I/O Pins, Program Memory, Timers, ADC.
PIC16F687T-I/ML
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC16F687-E/ML
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →PIC16F687-I/ML Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | 8-bit Flash microcontroller |
| Architecture | Mid-range PIC x14 |
| Maximum CPU Frequency | 20 MHz |
| Program Memory | 3.5 KB (2K x 14 words) |
| Data RAM | 128 bytes |
| On-Board EEPROM | Present |
| Operating Voltage Range | 2.0 V to 5.5 V |
| I/O Pin Count | 18 pins |
| Total Pin Count | 20 pins |
| Packhaging | 20-QFN (4 x 4 mm) |
| Uri ng Pagpapasok | Surface mount |
| Temperature Grade | Industrial grade |
| Program Memory Type | Flash |
| Instruction Set | Enhanced mid-range PIC 14-bit instruction architecture |
Gabay sa Pin Configuration ng PIC16F687-I/ML 20-qfn (4 x 4 mm)
Pin configuration para sa PIC16F687-I/ML (20-qfn (4 x 4 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa PIC16F687-I/ML.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
PIC16F687-I/ML ay nararapat para sa 6 aplikasyons: Industrial Sensor Node, Building Automation Controller, Battery-Powered Instrumentation, Compact Control Panel, LED Lighting Controller, Motor and Peripheral Control.
Industrial Sensor Node
The PIC16F687-I/ML fits compact industrial sensor nodes because it combines 18 I/O pins with a 2.0 V to 5.5 V operating range in a 4x4 mm QFN package. It can acquire digital switch, level, alarm, and interface signals while executing control logic locally. The 20 MHz CPU provides deterministic handling for time-based tasks, and 128 bytes of RAM supports modest working sets without requiring a larger controller. On-board EEPROM can retain calibration offsets, configuration records, and production data across power cycles. Place the supply decoupling close to the device and keep sensor returns away from switching nodes to preserve signal integrity.
Inirekomenda
Building Automation Controller
The PIC16F687-I/ML is suitable for distributed building-automation modules that monitor occupancy, lighting commands, temperature inputs, and actuator states. Its 18 I/O pins reduce the need for external I/O expansion, while 3.5 KB of Flash provides room for a production bootloader, diagnostics, and communication handling. The 2.0 V to 5.5 V supply range supports 3.3 V and 5 V peripheral ecosystems, and on-board EEPROM can preserve room profiles, device addresses, and calibration values. For reliable operation in wall-mounted equipment, follow the pin-specific decoupling and exposed-pad connection requirements and isolate field wiring from sensitive control signals.
Inirekomenda
Battery-Powered Instrumentation
The PIC16F687-I/ML can serve as the control core in low-duty-cycle battery-powered instrumentation because its mid-range architecture supports efficient event-driven firmware and multiple low-power operating modes. The 128-byte RAM is sufficient for short measurement buffers and state-machine variables, while EEPROM retains setup values without continuous volatile storage. A 2.0 V minimum operating voltage provides flexibility in battery-derived supplies, provided the regulator maintains the voltage and current required by the selected peripherals. Review sleep currents, wake-up timing, and analog-support limits in the manufacturer documentation before defining the power budget.
Inirekomenda
Compact Control Panel
The PIC16F687-I/ML is well matched to compact control panels requiring several buttons, status LEDs, relay outputs, and a serial connection. Its 18 I/O pins support more peripherals than a minimal 8- or 14-pin controller, while the 20-QFN 4x4 mm footprint preserves board area in tightly packaged equipment. The 20 MHz clock supports responsive debouncing, menu handling, and periodic status updates. The manufacturer configuration word should be selected for the intended oscillator and reset behavior, and the QFN exposed pad must be connected as directed for mechanical and thermal performance.
Inirekomenda
LED Lighting Controller
The PIC16F687-I/ML can control LED status indicators, channel enables, and simple lighting sequences in industrial or consumer equipment. Its 18 available I/O pins allow multiple outputs to share one controller, and the 20 MHz processing speed supports fast updates when the design uses timers or serial commands. The 3.5 KB Flash capacity is useful for retaining animation tables, dimming profiles, and commissioning logic, while EEPROM can store user-selected scenes. Choose current limiting and transistor drive circuits outside the microcontroller, account for their voltage drops, and keep high-current switching paths isolated from clock and programming nets.
Inirekomenda
Motor and Peripheral Control
The PIC16F687-I/ML can manage relays, solenoids, stepper sequencing, and auxiliary sensors in a compact motion or peripheral-control module. Its 18 I/O pins and 20 MHz clock allow the MCU to coordinate multiple discrete outputs while monitoring feedback inputs, and the 2.0 V to 5.5 V range accommodates common 3.3 V and 5 V logic families. The device is intended as the supervisory controller rather than the power switch itself, so external drivers must handle load current and voltage transients. Review timing, output-drive, and watchdog behavior against the manufacturer documentation for the selected peripheral configuration.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for PIC16F687-I/ML — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | PIC16F687T-I/ML | PIC16F687-E/ML |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-QFN (4 x 4 mm) | 20-QFN (4 x 4 mm) | 20-QFN (4 x 4 mm) |
| CPU Type | 8-bit PIC16 | 8-bit PIC16 | 8-bit PIC16 |
| Maximum Frequency | 20 MHz | 20 MHz | 20 MHz |
| Program Memory | 3.5 KB (2K x 14 words) | 3.5 KB (2K x 14 words) | 3.5 KB (2K x 14 words) |
| Data RAM | 128 bytes | 128 bytes | 128 bytes |
| I/O Pins | 18 | 18 | 18 |
| Operating Voltage Range | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V |
| Temperature Grade | Industrial (-I) | Industrial (-I) | Extended (-E) |
| On-Board EEPROM | Present | Present | Present |
Pangunahing mga Pagkakaiba
- Compact 18-I/O control in a 4x4 mm package (kumpara saPIC16F687-E/ML)
- 20 MHz operation with 3.5 KB Flash (kumpara saPIC16F687T-I/ML)
- Broad 2.0 V to 5.5 V supply range (kumpara saPIC16F687-E/ML)
Talaan ng Disenyo
Place the primary supply-decoupling capacitor immediately between the appropriate VDD and VSS pins, with the shortest practical ground path. Treat the 20-QFN exposed pad as a package-level connection specified by the manufacturer rather than as an ordinary signal pin. Use the recommended land pattern and preserve solder-paste and assembly-process symmetry so the small 4x4 mm package assembles consistently.
Route the oscillator, programming, reset, and communication signals away from relay coils, motor outputs, switching-regulator power paths, and other high-current nets. Keep the ground return of sensitive input stages independent of high-current return currents where the board topology allows. A compact QFN footprint provides little routing space, so plan pin assignments around uninterrupted power distribution and controlled-impedance communication routes.
Do not treat a related PIC16F687 ordering code as automatically interchangeable. Review the -I industrial suffix, -E extended suffix, package dimensions, exposed-pad requirements, and programming identifiers before substitution. Firmware may also depend on configuration-word settings such as oscillator selection, brownout behavior, watchdog operation, and port direction, which must be reviewed independently of the MPN.
Budget the 2.0 V to 5.5 V operating range against peripheral current, input thresholds, and external-interface levels rather than applying it to every attached device automatically. For battery-powered designs, calculate average current using sleep and active-mode durations. Validate startup behavior across the slowest supply ramp because reset and configuration-word settings determine how reliably the firmware begins execution.
Impormasyon ng Pagsunod sa Kautusan
The device is an industrial-grade PIC16 microcontroller, but specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified. AEC-Q100 qualification is not applicable to this part ordering code.