PIC16F687-I/ML - 20MHz 8-Bit Flash MCU | Microchip Technology
料号: PIC16F687-I/ML ✓ 量产中PIC16F687-I/ML 概述
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, digital I/O, timers, and communication peripherals on one device. The PIC16F687 belongs to Microchip's mid-range PIC16 family and uses the x14 instruction architecture. This architecture combines a relatively small instruction set with useful hardware peripherals, allowing economical designs for sensing, control, display, communication, and low-power automation products.
Key features include a 20 MHz maximum operating frequency, 3.5 KB of Flash program memory organized as 2K x 14 words, 128 bytes of data RAM, and 18 I/O pins. The 2.0 V to 5.5 V operating range supports both 3.3 V and 5 V system architectures. Its 20-QFN package has a compact 4x4 mm body, and the industrial-temperature suffix identifies the variant intended for extended-temperature industrial operation.
The device is based on the PIC16 mid-range x14 architecture rather than an ARM Cortex core, so firmware, interrupt handling, peripherals, and toolchain assumptions differ from STM32-class microcontrollers. Its dedicated Flash memory also supports in-circuit reprogramming, which is useful for production programming and field firmware maintenance. On-board EEPROM provides nonvolatile storage for calibration values, configuration data, counters, and serial numbers.
Typical applications include industrial sensor nodes, compact control panels, building-automation equipment, battery-powered instrumentation, motor-control peripherals, LED drivers, and small communications gateways. The combination of 18 I/O pins and a small QFN footprint supports space-constrained boards while retaining enough connections for switches, sensors, displays, and serial interfaces.
PCB design should preserve the manufacturer's recommended decoupling and exposed-pad connection details. Place the primary supply capacitor close to the VDD and VSS connections, route sensitive clock and reset signals away from high-current switching nodes, and program the configuration word for the intended oscillator and brownout conditions. The QFN thermal pad must be connected according to the pin and package instructions rather than treated as an unused pin.
This product page combines the Microchip device characteristics, package identification, sourcing information, and verified same-footprint alternatives with practical guidance for firmware, layout, and selection decisions.
直接替换替代料: PIC16F687-I/ML ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: PIC16F687-I/ML (相同外形与封装尺寸) ——差异在于 Package, I/O Pins, Program Memory, Timers, ADC.
PIC16F687T-I/ML
✅ 直接替换联系询价
查看数据手册 →PIC16F687-E/ML
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →PIC16F687-I/ML 最大额定值与电气特性
| Device Type | 8-bit Flash microcontroller |
| Architecture | Mid-range PIC x14 |
| Maximum CPU Frequency | 20 MHz |
| Program Memory | 3.5 KB (2K x 14 words) |
| Data RAM | 128 bytes |
| On-Board EEPROM | Present |
| Operating Voltage Range | 2.0 V to 5.5 V |
| I/O Pin Count | 18 pins |
| Total Pin Count | 20 pins |
| 封装 | 20-QFN (4 x 4 mm) |
| 安装类型 | Surface mount |
| Temperature Grade | Industrial grade |
| Program Memory Type | Flash |
| Instruction Set | Enhanced mid-range PIC 14-bit instruction architecture |
PIC16F687-I/ML 20-qfn (4 x 4 mm) 引脚配置指南
PIC16F687-I/ML(20-qfn (4 x 4 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: PIC16F687-I/ML.
请参阅 数据手册 以查看完整引脚配置。
典型应用
PIC16F687-I/ML 适用于 6 应用s: Industrial Sensor Node, Building Automation Controller, Battery-Powered Instrumentation, Compact Control Panel, LED Lighting Controller, Motor and Peripheral Control.
Industrial Sensor Node
The PIC16F687-I/ML fits compact industrial sensor nodes because it combines 18 I/O pins with a 2.0 V to 5.5 V operating range in a 4x4 mm QFN package. It can acquire digital switch, level, alarm, and interface signals while executing control logic locally. The 20 MHz CPU provides deterministic handling for time-based tasks, and 128 bytes of RAM supports modest working sets without requiring a larger controller. On-board EEPROM can retain calibration offsets, configuration records, and production data across power cycles. Place the supply decoupling close to the device and keep sensor returns away from switching nodes to preserve signal integrity.
推荐
Building Automation Controller
The PIC16F687-I/ML is suitable for distributed building-automation modules that monitor occupancy, lighting commands, temperature inputs, and actuator states. Its 18 I/O pins reduce the need for external I/O expansion, while 3.5 KB of Flash provides room for a production bootloader, diagnostics, and communication handling. The 2.0 V to 5.5 V supply range supports 3.3 V and 5 V peripheral ecosystems, and on-board EEPROM can preserve room profiles, device addresses, and calibration values. For reliable operation in wall-mounted equipment, follow the pin-specific decoupling and exposed-pad connection requirements and isolate field wiring from sensitive control signals.
推荐
Battery-Powered Instrumentation
The PIC16F687-I/ML can serve as the control core in low-duty-cycle battery-powered instrumentation because its mid-range architecture supports efficient event-driven firmware and multiple low-power operating modes. The 128-byte RAM is sufficient for short measurement buffers and state-machine variables, while EEPROM retains setup values without continuous volatile storage. A 2.0 V minimum operating voltage provides flexibility in battery-derived supplies, provided the regulator maintains the voltage and current required by the selected peripherals. Review sleep currents, wake-up timing, and analog-support limits in the manufacturer documentation before defining the power budget.
推荐
Compact Control Panel
The PIC16F687-I/ML is well matched to compact control panels requiring several buttons, status LEDs, relay outputs, and a serial connection. Its 18 I/O pins support more peripherals than a minimal 8- or 14-pin controller, while the 20-QFN 4x4 mm footprint preserves board area in tightly packaged equipment. The 20 MHz clock supports responsive debouncing, menu handling, and periodic status updates. The manufacturer configuration word should be selected for the intended oscillator and reset behavior, and the QFN exposed pad must be connected as directed for mechanical and thermal performance.
推荐
LED Lighting Controller
The PIC16F687-I/ML can control LED status indicators, channel enables, and simple lighting sequences in industrial or consumer equipment. Its 18 available I/O pins allow multiple outputs to share one controller, and the 20 MHz processing speed supports fast updates when the design uses timers or serial commands. The 3.5 KB Flash capacity is useful for retaining animation tables, dimming profiles, and commissioning logic, while EEPROM can store user-selected scenes. Choose current limiting and transistor drive circuits outside the microcontroller, account for their voltage drops, and keep high-current switching paths isolated from clock and programming nets.
推荐
Motor and Peripheral Control
The PIC16F687-I/ML can manage relays, solenoids, stepper sequencing, and auxiliary sensors in a compact motion or peripheral-control module. Its 18 I/O pins and 20 MHz clock allow the MCU to coordinate multiple discrete outputs while monitoring feedback inputs, and the 2.0 V to 5.5 V range accommodates common 3.3 V and 5 V logic families. The device is intended as the supervisory controller rather than the power switch itself, so external drivers must handle load current and voltage transients. Review timing, output-drive, and watchdog behavior against the manufacturer documentation for the selected peripheral configuration.
推荐
推荐产品汇总
工程参考数据: PIC16F687-I/ML ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC16F687T-I/ML | PIC16F687-E/ML |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-QFN (4 x 4 mm) | 20-QFN (4 x 4 mm) | 20-QFN (4 x 4 mm) |
| CPU Type | 8-bit PIC16 | 8-bit PIC16 | 8-bit PIC16 |
| Maximum Frequency | 20 MHz | 20 MHz | 20 MHz |
| Program Memory | 3.5 KB (2K x 14 words) | 3.5 KB (2K x 14 words) | 3.5 KB (2K x 14 words) |
| Data RAM | 128 bytes | 128 bytes | 128 bytes |
| I/O Pins | 18 | 18 | 18 |
| Operating Voltage Range | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V |
| Temperature Grade | Industrial (-I) | Industrial (-I) | Extended (-E) |
| On-Board EEPROM | Present | Present | Present |
关键差异点
- Compact 18-I/O control in a 4x4 mm package (对比 PIC16F687-E/ML)
- 20 MHz operation with 3.5 KB Flash (对比 PIC16F687T-I/ML)
- Broad 2.0 V to 5.5 V supply range (对比 PIC16F687-E/ML)
设计说明
Place the primary supply-decoupling capacitor immediately between the appropriate VDD and VSS pins, with the shortest practical ground path. Treat the 20-QFN exposed pad as a package-level connection specified by the manufacturer rather than as an ordinary signal pin. Use the recommended land pattern and preserve solder-paste and assembly-process symmetry so the small 4x4 mm package assembles consistently.
Route the oscillator, programming, reset, and communication signals away from relay coils, motor outputs, switching-regulator power paths, and other high-current nets. Keep the ground return of sensitive input stages independent of high-current return currents where the board topology allows. A compact QFN footprint provides little routing space, so plan pin assignments around uninterrupted power distribution and controlled-impedance communication routes.
Do not treat a related PIC16F687 ordering code as automatically interchangeable. Review the -I industrial suffix, -E extended suffix, package dimensions, exposed-pad requirements, and programming identifiers before substitution. Firmware may also depend on configuration-word settings such as oscillator selection, brownout behavior, watchdog operation, and port direction, which must be reviewed independently of the MPN.
Budget the 2.0 V to 5.5 V operating range against peripheral current, input thresholds, and external-interface levels rather than applying it to every attached device automatically. For battery-powered designs, calculate average current using sleep and active-mode durations. Validate startup behavior across the slowest supply ramp because reset and configuration-word settings determine how reliably the firmware begins execution.
合规信息
The device is an industrial-grade PIC16 microcontroller, but specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified. AEC-Q100 qualification is not applicable to this part ordering code.