Microchip Technology

PIC16F687-I/ML - 20MHz 8-Bit Flash MCU | Microchip Technology

N.º de pieza: PIC16F687-I/ML ✓ Activo
2.0 V to 5.5 V Vdss 20-QFN (4 x 4 mm) Package 20 MHz Speed 3.5 KB (2K x 14 words) Memory
MOQ: 1 |

PIC16F687-I/ML Descripción general

The Microchip Technology PIC16F687-I/ML is a 20 MHz, 8-bit Flash microcontroller with 3.5 KB of program memory, 128 bytes of RAM, 18 I/O pins, and a 20-QFN 4x4 mm package. It operates from 2.0 V to 5.5 V and includes on-board EEPROM data memory, making it suitable for compact embedded control systems that require flexible firmware updates and nonvolatile parameter storage.

A microcontroller is a programmable semiconductor that integrates a CPU core, memory, digital I/O, timers, and communication peripherals on one device. The PIC16F687 belongs to Microchip's mid-range PIC16 family and uses the x14 instruction architecture. This architecture combines a relatively small instruction set with useful hardware peripherals, allowing economical designs for sensing, control, display, communication, and low-power automation products.

Key features include a 20 MHz maximum operating frequency, 3.5 KB of Flash program memory organized as 2K x 14 words, 128 bytes of data RAM, and 18 I/O pins. The 2.0 V to 5.5 V operating range supports both 3.3 V and 5 V system architectures. Its 20-QFN package has a compact 4x4 mm body, and the industrial-temperature suffix identifies the variant intended for extended-temperature industrial operation.

The device is based on the PIC16 mid-range x14 architecture rather than an ARM Cortex core, so firmware, interrupt handling, peripherals, and toolchain assumptions differ from STM32-class microcontrollers. Its dedicated Flash memory also supports in-circuit reprogramming, which is useful for production programming and field firmware maintenance. On-board EEPROM provides nonvolatile storage for calibration values, configuration data, counters, and serial numbers.

Typical applications include industrial sensor nodes, compact control panels, building-automation equipment, battery-powered instrumentation, motor-control peripherals, LED drivers, and small communications gateways. The combination of 18 I/O pins and a small QFN footprint supports space-constrained boards while retaining enough connections for switches, sensors, displays, and serial interfaces.

PCB design should preserve the manufacturer's recommended decoupling and exposed-pad connection details. Place the primary supply capacitor close to the VDD and VSS connections, route sensitive clock and reset signals away from high-current switching nodes, and program the configuration word for the intended oscillator and brownout conditions. The QFN thermal pad must be connected according to the pin and package instructions rather than treated as an unused pin.

This product page combines the Microchip device characteristics, package identification, sourcing information, and verified same-footprint alternatives with practical guidance for firmware, layout, and selection decisions.

Alternativas directas para PIC16F687-I/ML — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con PIC16F687-I/ML (mismo factor de forma y huella) — difiere en Package, I/O Pins, Program Memory, Timers, ADC.

Microchip Technology
Package: 20-pin QFN with exposed pad
Program Memory: 1.75 KB (1K x 14 bits)
Microchip Technology
Package: 20-pin QFN (4 x 4 mm)
I/O Pins: 11 (bidirectional)
Timers: 1 x 8-bit, 1 x 16-bit
Microchip Technology
Package: 20-QFN, 4 x 4 mm
Program Memory: 7 KB Flash (4K x 14 words)
Microchip Technology
Package: 20-pin QFN (4x4 mm) with exposed pad
I/O Pins: 11
Timers: 2x 8-bit, 1x 16-bit
Microchip Technology
Package: 20-pin QFN with exposed pad (ML), T/R
I/O Pins: 18 (with individual direction control)
Program Memory: 3.5 KB Flash (2K x 14)
Microchip Technology
Package: 16-pin QFN (4 x 4 mm), /ML suffix
I/O Pins: 12 (11 digital + 1 input-only)
Timers: 1 x 16-bit (TMR1 with capture/compare/PWM), 1 x 8-bit (TMR2)

PIC16F687T-I/ML

✅ Sustitución directa
Microchip Technology
📦 20-QFN (4 x 4 mm)
8-Bit Microcontroller (MCU) · PIC16 mid-range x14 · RISC · 20 MHz (5 MIPS, 200 ns instruction cycle) · 3.5 KB Flash (2K x 14) · 128 bytes · 256 bytes · 2.0 V to 5.5 V

Consulte el precio

Ver hoja de datos →

PIC16F687-E/ML

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Microchip Technology
📦 20-QFN (4 x 4 mm)
PIC16 mid-range 8-bit RISC · 14-bit · 3.5 KB (2K x 14) · 128 bytes · 256 bytes · 20 MHz (5 MIPS) · 2.0 V to 5.5 V · 11

Consulte el precio

Ver hoja de datos →

PIC16F687-I/ML Valores máximos y características eléctricas

Device Type 8-bit Flash microcontroller
Architecture Mid-range PIC x14
Maximum CPU Frequency 20 MHz
Program Memory 3.5 KB (2K x 14 words)
Data RAM 128 bytes
On-Board EEPROM Present
Operating Voltage Range 2.0 V to 5.5 V
I/O Pin Count 18 pins
Total Pin Count 20 pins
Encapsulado 20-QFN (4 x 4 mm)
Tipo de montaje Surface mount
Temperature Grade Industrial grade
Program Memory Type Flash
Instruction Set Enhanced mid-range PIC 14-bit instruction architecture

Guía de configuración de pines de PIC16F687-I/ML 20-qfn (4 x 4 mm)

Configuración de pines para PIC16F687-I/ML (encapsulado 20-qfn (4 x 4 mm)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 20-qfn (4 x 4 mm) para PIC16F687-I/ML

No hay datos detallados de patillaje disponibles para PIC16F687-I/ML.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

PIC16F687-I/ML es adecuado para 6 aplicacións: Industrial Sensor Node, Building Automation Controller, Battery-Powered Instrumentation, Compact Control Panel, LED Lighting Controller, Motor and Peripheral Control.

🏭

Industrial Sensor Node

The PIC16F687-I/ML fits compact industrial sensor nodes because it combines 18 I/O pins with a 2.0 V to 5.5 V operating range in a 4x4 mm QFN package. It can acquire digital switch, level, alarm, and interface signals while executing control logic locally. The 20 MHz CPU provides deterministic handling for time-based tasks, and 128 bytes of RAM supports modest working sets without requiring a larger controller. On-board EEPROM can retain calibration offsets, configuration records, and production data across power cycles. Place the supply decoupling close to the device and keep sensor returns away from switching nodes to preserve signal integrity.

🧩

Building Automation Controller

The PIC16F687-I/ML is suitable for distributed building-automation modules that monitor occupancy, lighting commands, temperature inputs, and actuator states. Its 18 I/O pins reduce the need for external I/O expansion, while 3.5 KB of Flash provides room for a production bootloader, diagnostics, and communication handling. The 2.0 V to 5.5 V supply range supports 3.3 V and 5 V peripheral ecosystems, and on-board EEPROM can preserve room profiles, device addresses, and calibration values. For reliable operation in wall-mounted equipment, follow the pin-specific decoupling and exposed-pad connection requirements and isolate field wiring from sensitive control signals.

🔧

Battery-Powered Instrumentation

The PIC16F687-I/ML can serve as the control core in low-duty-cycle battery-powered instrumentation because its mid-range architecture supports efficient event-driven firmware and multiple low-power operating modes. The 128-byte RAM is sufficient for short measurement buffers and state-machine variables, while EEPROM retains setup values without continuous volatile storage. A 2.0 V minimum operating voltage provides flexibility in battery-derived supplies, provided the regulator maintains the voltage and current required by the selected peripherals. Review sleep currents, wake-up timing, and analog-support limits in the manufacturer documentation before defining the power budget.

📱

Compact Control Panel

The PIC16F687-I/ML is well matched to compact control panels requiring several buttons, status LEDs, relay outputs, and a serial connection. Its 18 I/O pins support more peripherals than a minimal 8- or 14-pin controller, while the 20-QFN 4x4 mm footprint preserves board area in tightly packaged equipment. The 20 MHz clock supports responsive debouncing, menu handling, and periodic status updates. The manufacturer configuration word should be selected for the intended oscillator and reset behavior, and the QFN exposed pad must be connected as directed for mechanical and thermal performance.

💡

LED Lighting Controller

The PIC16F687-I/ML can control LED status indicators, channel enables, and simple lighting sequences in industrial or consumer equipment. Its 18 available I/O pins allow multiple outputs to share one controller, and the 20 MHz processing speed supports fast updates when the design uses timers or serial commands. The 3.5 KB Flash capacity is useful for retaining animation tables, dimming profiles, and commissioning logic, while EEPROM can store user-selected scenes. Choose current limiting and transistor drive circuits outside the microcontroller, account for their voltage drops, and keep high-current switching paths isolated from clock and programming nets.

⚡

Motor and Peripheral Control

The PIC16F687-I/ML can manage relays, solenoids, stepper sequencing, and auxiliary sensors in a compact motion or peripheral-control module. Its 18 I/O pins and 20 MHz clock allow the MCU to coordinate multiple discrete outputs while monitoring feedback inputs, and the 2.0 V to 5.5 V range accommodates common 3.3 V and 5 V logic families. The device is intended as the supervisory controller rather than the power switch itself, so external drivers must handle load current and voltage transients. Review timing, output-drive, and watchdog behavior against the manufacturer documentation for the selected peripheral configuration.

What is the PIC16F687-I/ML?
The PIC16F687-I/ML is a Microchip Technology 8-bit Flash microcontroller rated for operation at up to 20 MHz. According to the Microchip product page, it provides 3.5 KB of Flash program memory, 128 bytes of RAM, 18 I/O pins, on-board EEPROM, and a 2.0 V to 5.5 V operating range in a 20-QFN 4x4 mm package.
What is the operating voltage of PIC16F687-I/ML?
The PIC16F687-I/ML operates from 2.0 V to 5.5 V. According to the Microchip product page, this range supports both 3.3 V and 5 V embedded designs. Peripheral and I/O operating limits can be narrower than the device supply range, so the manufacturer datasheet should be checked against the selected clock configuration and external interface voltage levels.
How much memory does the PIC16F687-I/ML have?
The PIC16F687-I/ML contains 3.5 KB of Flash program memory, organized as 2K x 14 words, and 128 bytes of data RAM. The Microchip product page also identifies on-board EEPROM for nonvolatile data storage. Firmware must fit within the 2K program words, while interrupt handlers, stack use, and application variables must be budgeted against the available RAM.
Where can I download the PIC16F687 datasheet PDF?
The official PIC16F687 product page is the primary starting point for the manufacturer datasheet and device documentation. The PIC16F687-I/ML listing also identifies the exact ordering code. Confirm that the selected package, grade, and suffix correspond to the 20-QFN industrial-temperature variant before using pin, electrical, and timing information in a design.
Where can I find the PIC16F687-I/ML pinout?
The PIC16F687-I/ML pinout is defined in the manufacturer datasheet for the 20-QFN package. Use the package pin-description table and land-pattern guidance when assigning VDD, VSS, programming, reset, oscillator, I/O, and exposed-pad connections. The exposed thermal pad must be connected according to the manufacturer package instructions rather than assigned an ordinary GPIO function.
PIC16F687-I/ML vs PIC16F687T-I/ML: which one should I choose?
PIC16F687T-I/ML is the closest verified same-footprint alternative, with the same 8-bit architecture, 20 MHz speed, 3.5 KB Flash, 128 bytes of RAM, 18 I/O pins, and 20-QFN 4x4 mm package listed for both devices. Before substitution, compare the exact suffix temperature, ordering, and ordering-code requirements in the Microchip documentation.
When should I choose PIC16F687-I/ML over another PIC16 microcontroller?
Choose the PIC16F687-I/ML when a design requires the PIC16 x14 software ecosystem, a 20 MHz operating speed, 3.5 KB of Flash, 128 bytes of RAM, 18 I/O pins, and a compact 20-QFN footprint. It is a better fit than a lower-pin-count PIC16 when several sensors, switches, or interface signals are needed without moving to a larger package.
Is PIC16F687-I/ML suitable for industrial control systems?
The PIC16F687-I/ML is an industrial-grade option in the 20-QFN package and operates across a 2.0 V to 5.5 V supply range. Its 18 I/O pins support discrete sensors, switches, relays, and status indicators. Industrial suitability still depends on the complete system temperature range, isolation requirements, EMC design, and applicable equipment qualification.
What can replace the PIC16F687-I/ML?
PIC16F687T-I/ML is a verified same-brand, same-package candidate for replacement review because the listing identifies the same 20-QFN 4x4 mm package, 20 MHz speed, 3.5 KB Flash, 128 bytes of RAM, and 18 I/O pins. A drop-in decision still requires checking suffix-specific temperature and ordering requirements against the manufacturer documentation.
Is PIC16F687-I/ML the same as PIC16F687T-I/ML?
PIC16F687-I/ML and PIC16F687T-I/ML share the core PIC16 device characteristics and 20-QFN 4x4 mm package, including 20 MHz operation, 3.5 KB Flash, 128 bytes of RAM, and 18 I/O pins. They are not automatically interchangeable for every order because suffix-specific grade, labeling, or procurement requirements must also be verified.
What is the best Microchip equivalent for PIC16F687-I/ML?
PIC16F687T-I/ML is the best directly identified Microchip candidate for a same-package replacement review. Both devices are listed as 8-bit, 20 MHz PIC16F687-family devices with 3.5 KB of Flash, 128 bytes of RAM, 18 I/O pins, and a 20-QFN package. Validate the exact ordering suffix before releasing a replacement.
Where can I buy PIC16F687-I/ML online?
Use the Request a Quote form on this page to request PIC16F687-I/ML availability, current commercial terms, and a lead-time quotation for the exact MPN. Providing the full ordering code PIC16F687-I/ML helps avoid ambiguity between package, temperature-grade, and reel-ordering variants.
What is the price of PIC16F687-I/ML?
The current commercial price of PIC16F687-I/ML is generated through the Request a Quote form on this page. Submit the exact MPN and required quantity for a current quotation. Keeping the inquiry tied to the exact ordering code also prevents a quote from being prepared for a different package or temperature-grade variant.
What is the lead time for PIC16F687-I/ML?
The current lead time for PIC16F687-I/ML should be requested through the Request a Quote form on this page. Include the required quantity, date code preference, packaging requirement, and target delivery location. A quotation-based response is more reliable than assuming that general catalog availability applies to every lot.
Is PIC16F687-I/ML in stock?
Current PIC16F687-I/ML inventory should be confirmed through the Request a Quote form on this page. Submit the exact MPN, required quantity, and packaging requirements so the response reflects the specific 20-QFN industrial-temperature ordering code rather than a related PIC16F687 configuration.
What are the key specifications of PIC16F687-I/ML that engineers should know?
The key PIC16F687-I/ML specifications are a 20 MHz maximum clock, 3.5 KB of 2K x 14-word Flash, 128 bytes of RAM, 18 I/O pins, a 2.0 V to 5.5 V supply range, on-board EEPROM, and a 20-QFN 4x4 mm package. Its mid-range x14 architecture also makes the PIC16 toolchain and peripheral programming model central to firmware development.

Datos de referencia de ingeniería para PIC16F687-I/ML — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the PIC16F687-I/ML for compact industrial designs that need the PIC16 x14 ecosystem, 20 MHz execution, 3.5 KB of Flash, 128 bytes of RAM, and 18 I/O pins in a 20-QFN package. It is especially suitable when the product requires industrial-temperature ordering and can use the device's onboard EEPROM for configuration or calibration data. PIC16F687T-I/ML is the closest verified same-package candidate for existing-product substitution because its listed core parameters and footprint match; confirm the exact suffix and ordering requirements before release. PIC16F687-E/ML remains a same-footprint family alternative, but its -E temperature grade makes it more appropriate where the system specification calls for extended rather than industrial temperature. Do not choose an STM32, AVR, or other cross-architecture MCU as a pin-to-pin replacement for this design: software, peripheral mapping, and pin behavior differ even when the package dimensions appear similar.

Comparación con alternativas

Parámetro Este producto PIC16F687T-I/ML PIC16F687-E/ML
Brand Microchip Technology Microchip Technology Microchip Technology
Package 20-QFN (4 x 4 mm) 20-QFN (4 x 4 mm) 20-QFN (4 x 4 mm)
CPU Type 8-bit PIC16 8-bit PIC16 8-bit PIC16
Maximum Frequency 20 MHz 20 MHz 20 MHz
Program Memory 3.5 KB (2K x 14 words) 3.5 KB (2K x 14 words) 3.5 KB (2K x 14 words)
Data RAM 128 bytes 128 bytes 128 bytes
I/O Pins 18 18 18
Operating Voltage Range 2.0 V to 5.5 V 2.0 V to 5.5 V 2.0 V to 5.5 V
Temperature Grade Industrial (-I) Industrial (-I) Extended (-E)
On-Board EEPROM Present Present Present

Diferenciadores clave

  • Compact 18-I/O control in a 4x4 mm package (frente a PIC16F687-E/ML)
  • 20 MHz operation with 3.5 KB Flash (frente a PIC16F687T-I/ML)
  • Broad 2.0 V to 5.5 V supply range (frente a PIC16F687-E/ML)

Notas de diseño

Place the primary supply-decoupling capacitor immediately between the appropriate VDD and VSS pins, with the shortest practical ground path. Treat the 20-QFN exposed pad as a package-level connection specified by the manufacturer rather than as an ordinary signal pin. Use the recommended land pattern and preserve solder-paste and assembly-process symmetry so the small 4x4 mm package assembles consistently.

Route the oscillator, programming, reset, and communication signals away from relay coils, motor outputs, switching-regulator power paths, and other high-current nets. Keep the ground return of sensitive input stages independent of high-current return currents where the board topology allows. A compact QFN footprint provides little routing space, so plan pin assignments around uninterrupted power distribution and controlled-impedance communication routes.

Do not treat a related PIC16F687 ordering code as automatically interchangeable. Review the -I industrial suffix, -E extended suffix, package dimensions, exposed-pad requirements, and programming identifiers before substitution. Firmware may also depend on configuration-word settings such as oscillator selection, brownout behavior, watchdog operation, and port direction, which must be reviewed independently of the MPN.

Budget the 2.0 V to 5.5 V operating range against peripheral current, input thresholds, and external-interface levels rather than applying it to every attached device automatically. For battery-powered designs, calculate average current using sleep and active-mode durations. Validate startup behavior across the slowest supply ramp because reset and configuration-word settings determine how reliably the firmware begins execution.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The device is an industrial-grade PIC16 microcontroller, but specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified. AEC-Q100 qualification is not applicable to this part ordering code.

Búsquedas relacionadas

pic16f687 datasheet pdf pic16f687 datasheet PIC16F687-I/ML datasheet PIC16F687-I/ML pinout PIC16F687-I/ML specifications PIC16F687-I/ML equivalent PIC16F687-I/ML replacement PIC16F687-I/ML cross reference PIC16F687-I/ML vs PIC16F687T-I/ML PIC16F687 20-QFN footprint Microchip PIC16F687-I/ML PIC16F687-I/ML price PIC16F687-I/ML stock PIC16F687 industrial sensor controller PIC16F687 building automation controller

Componentes & términos relacionados

Microchip Technology PIC16F687 PIC16F687-I/ML PIC16F687T-I/ML PIC16F687-E/ML PIC16 8-bit microcontroller Flash microcontroller embedded microcontroller integrated circuit semiconductor mid-range PIC architecture x14 instruction set program memory data RAM EEPROM 20 MHz 18 I/O pins 2.0 V to 5.5 V 20-QFN QFN family surface-mount package industrial control sensor node
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ