Microchip Technology

PIC24FJ64GB204-E/ML - 16-Bit 32MHz USB MCU | Microchip

MPN: PIC24FJ64GB204-E/ML ✓ Nakahanda
2.0 V to 3.5 V Vdss 44-QFN (8 x 8 mm) with exposed pad Package 32 MHz Speed 64 KB Memory
MOQ: 1 |

PIC24FJ64GB204-E/ML Ulas

The Microchip Technology PIC24FJ64GB204-E/ML is a 16-bit PIC24FJ-series microcontroller featuring an integrated crypto module, USB connectivity, and eXtreme Low Power operation. It operates at up to 32 MHz, includes 64 KB of Flash program memory and 8 KB of RAM, and is packaged in a 44-QFN 8 x 8 mm package. The device is designed for compact embedded systems that require local connectivity and hardware-assisted security without a separate external crypto component.

A microcontroller is a semiconductor that combines a processor core, program memory, data memory, and peripherals on one integrated circuit. The PIC24FJ64GB204 belongs to the 16-bit embedded microcontroller hierarchy, combining a PIC24 core with USB, analog, timing, communication, and security peripherals. Its low-power feature set supports applications that spend substantial time in sleep or low-activity states while retaining fast wake-up behavior.

The principal features include 64 KB of Flash, 8 KB of RAM, a 32 MHz maximum operating frequency, USB connectivity, and an integrated crypto module. The device also provides up to 34 I/O pins, 68 interrupt sources, and 4 trap sources for embedded control. These resources allow firmware to combine local data acquisition, communication, control outputs, and secure operations in a single device.

The PIC24FJ64GB204 family uses a 16-bit architecture and is positioned for low-power embedded applications where USB and cryptographic hardware are valuable. The 44-pin QFN package reduces board area compared with larger leaded or fine-pitch alternatives, while the exposed-pad construction supports improved heat transfer when the device operates at sustained processing loads. The -E/ML ordering code identifies the automotive-temperature package variant.

Typical uses include USB-connected security tokens, low-power data loggers, portable measurement equipment, industrial sensing nodes, and compact consumer accessories. In these systems, USB can simplify connection to a host device while the integrated crypto module supports protected communications or credential handling. The 34 available I/O pins also allow designers to connect sensors, displays, communication peripherals, and digital control signals without adding a separate interface IC.

PCB design should provide a continuous ground plane, short decoupling paths, and careful exposed-pad connection. Place the device and its supporting components close to their associated power and signal nets, route USB differential pairs as a controlled impedance pair, and keep analog inputs away from high-current switching paths. The exact pin functions, exposed-pad connection, and recommended capacitor arrangement should be checked in the manufacturer pin-description table and application guidance.

This product page organizes the key MCU characteristics, package information, embedded-security context, and application guidance for engineers evaluating the PIC24FJ64GB204-E/ML. It also identifies pin-compatible family alternatives and highlights where USB, memory, temperature grade, and crypto requirements affect replacement decisions.

Mga alternatibo na pwedeng ilagay na PIC24FJ64GB204-E/ML — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok PIC24FJ64GB204-E/ML (parehas na form factor at footprint) — pagkakaiba sa Package, USB Interface, RoHS Status, ADC, Maximum CPU Speed.

Microchip Technology
Package: 28-pin QFN (6x6 mm) with exposed pad (ML)
RoHS Status: Compliant
ADC: 10-bit, 16-channel, 500 ksps
Microchip Technology
Package: 28-pin QFN (6 x 6 mm)
USB Interface: Full-Speed USB
RoHS Status: unknown
Microchip Technology
Package: VQFN-44 (8x8 mm) with exposed thermal pad
USB Interface: USB 2.0 Full-Speed OTG with internal transceiver
RoHS Status: Compliant

PIC24FJ64GB204-I/ML

✅ Drop-In
Microchip Technology
📦 44-QFN (8 x 8 mm)
PIC24F XLP 16-bit MCU · PIC24F 16-bit modified Harvard · 64 KB · 8 KB · 32 MHz / 16 MIPS · 2.0 V to 3.6 V · -40 C to +85 C (Industrial) · USB 2.0 Full-Speed OTG with internal transceiver

Magkontak para sa presyo

Tingnan ang Datasheet →

PIC24FJ64GB002-I/ML

✅ Drop-In
Microchip Technology
📦 44-QFN (8 x 8 mm)
16-bit PIC24F low-power microcontroller · 32 MHz · 16 MIPS at 3.3 V · 64 KB · 8 KB · 24 bits · Full-Speed USB · 2.5 V to 3.3 V

Magkontak para sa presyo

Tingnan ang Datasheet →

PIC24FJ64GA002-I/ML

✅ Drop-In
Microchip Technology
📦 44-QFN (8 x 8 mm)
PIC24F 16-bit RISC modified Harvard · 64 KB (22K x 24 instruction words) · 8 KB · 32 MHz (16 MIPS) · 2.0 V to 3.6 V · -40C to +85C (Industrial, 'I') · 21 · 10-bit, 16-channel, 500 ksps

Magkontak para sa presyo

Tingnan ang Datasheet →

PIC24FJ64GB204-E/ML Mga Pinakamataas na Rating at Electrical Characteristics

Product Type 16-bit Flash microcontroller
Series PIC24FJ64GB204
Maximum CPU Frequency 32 MHz
Flash Program Memory 64 KB
Program Memory Organization 64K x 8
RAM 8 KB
Available Instructions 22,016 instructions
Operating Supply Range 2.0 V to 3.5 V
Nominal Supply Voltage 3.3 V
I/O Pin Count 34
Interrupt Sources 68
Trap Sources 4
USB Interface USB
Crypto Hardware Integrated crypto module
ADC Resolution 10-bit or 12-bit software-selectable
ADC Maximum Conversion Rate 400 ksps at 10-bit or 350 ksps at 12-bit
Packhaging 44-QFN (8 x 8 mm) with exposed pad
Package Thickness 0.9 mm
Uri ng Pagpapasok Surface mount
Temperature Grade Extended automotive temperature grade

Gabay sa Pin Configuration ng PIC24FJ64GB204-E/ML 0.9 mm

Pin configuration para sa PIC24FJ64GB204-E/ML (0.9 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 0.9 mm package para sa PIC24FJ64GB204-E/ML

Wala ng detalyadong pinout data na magagamit para sa PIC24FJ64GB204-E/ML.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

PIC24FJ64GB204-E/ML ay nararapat para sa 6 aplikasyons: USB Security Token, Low-Power Data Logger, Portable Measurement Instrument, Industrial Sensing Node, Secure Configuration Controller, Automotive Access and Control Module.

🖥️

USB Security Token

The PIC24FJ64GB204-E/ML fits a compact USB security token because it combines a 32 MHz 16-bit core, 64 KB of Flash, 8 KB of RAM, USB connectivity, and an integrated crypto module in one 44-QFN package. Firmware can manage host authentication, device commands, session state, and protected data handling without requiring a separate crypto controller. Its 34 I/O pins provide expansion for secure elements, buttons, indicators, or sensor inputs, while the extended automotive temperature option supports harsher operating environments. USB bus layout, power management, and secure boot requirements still need careful validation.

🧩

Low-Power Data Logger

The PIC24FJ64GB204-E/ML is suitable for a low-power USB data logger because its eXtreme Low Power architecture can reduce activity during idle periods while retaining 64 KB of Flash and 8 KB of RAM for application code and buffered records. The 34 I/O pins allow connection of temperature, motion, pressure, or digital event inputs, and the integrated USB interface supports periodic host transfer. Developers should size the Flash for the required logging interval, use the manufacturer low-power mode guidance, and validate wake sources so that recorded data is not lost between host sessions.

📱

Portable Measurement Instrument

The PIC24FJ64GB204-E/ML can control a portable measurement instrument that combines a sensor front end, local display, USB data exchange, and secure configuration updates. Its 10-bit or 12-bit software-selectable ADC supports applications requiring different conversion speed and resolution tradeoffs, while 68 interrupt sources help coordinate multiple capture events. The 44-QFN 8 x 8 mm package preserves board area in handheld instruments, and the integrated crypto module can protect transferred measurement or configuration data. Analog layout, calibration storage, and USB enumeration behavior remain important implementation considerations.

🏭

Industrial Sensing Node

The PIC24FJ64GB204-E/ML supports an industrial sensing node that must acquire local data, make decisions, and communicate through USB or another attached peripheral. Its 32 MHz processing rate provides headroom for protocol handling, while 64 KB of Flash and 8 KB of RAM suit compact embedded firmware. The -E ordering code extends the thermal option for demanding environments, although the design must still verify its complete operating-temperature limits. Use the 34 available I/O pins for digital sensors and actuators, and isolate analog inputs from USB and digital switching paths.

🔒

Secure Configuration Controller

The PIC24FJ64GB204-E/ML is appropriate for a secure configuration controller that stores device settings, authenticates commands, and exchanges protected records with a host or service equipment. The integrated crypto module supplies dedicated cryptographic capability, reducing the need to reserve a separate microcontroller for routine protected operations. Its 8 KB of RAM is sufficient for transient protocol buffers, and the 64 KB Flash stores firmware and configuration logic. Designers should confirm that the exact GB204 peripheral set matches the security workflow and that production programming, key provisioning, and certificate storage are integrated into the product lifecycle.

🚗

Automotive Access and Control Module

The PIC24FJ64GB204-E/ML can serve as the controller in a compact automotive access, diagnostic, or distributed control module that benefits from USB for service connectivity and cryptographic hardware for protected communication. The extended automotive temperature ordering code distinguishes it from the industrial-grade GB204-I/ML option. Thirty-four I/O pins permit integration of switches, sensors, indicators, and communication interfaces, while 32 MHz operation supports responsive control software. Automotive qualification, transient protection, ESD strategy, and exact AEC-Q100 status must be checked against the specific device documentation before production release.

What are the key specifications of PIC24FJ64GB204-E/ML that engineers should know?
The PIC24FJ64GB204-E/ML is a 16-bit, 32 MHz microcontroller with 64 KB of Flash, 8 KB of RAM, USB connectivity, and an integrated crypto module. It provides 34 I/O pins and operates from 2.0 V to 3.5 V in a 44-QFN package measuring 8 x 8 mm. According to the Microchip product page, the combination of USB, crypto hardware, and eXtreme Low Power operation is intended for low-power embedded-security applications.
Where can I download the PIC24FJ64GB204 datasheet PDF?
The official PIC24FJ64GB204 documentation is available through the Microchip product page at https://www.microchip.com/en-us/product/PIC24FJ64GB204. That page provides the family datasheet and device resources. For the exact -E/ML ordering code, verify the package, temperature grade, exposed-pad connection, and pin functions against the manufacturer pin-description table before releasing a PCB design.
What is the operating voltage range of PIC24FJ64GB204-E/ML?
The PIC24FJ64GB204-E/ML operates from 2.0 V to 3.5 V, with 3.3 V listed for the specific ordering variant. According to the Microchip PIC24FJ64GB204 technical documentation, the device includes sleep operation and a bandgap reference input. The power design must keep all rails within the manufacturer limits while providing local decoupling for the MCU and any USB transceiver circuitry.
How much Flash and RAM does PIC24FJ64GB204-E/ML have?
The PIC24FJ64GB204-E/ML contains 64 KB of Flash program memory and 8 KB of data RAM, corresponding to a 64K x 8 Flash organization. The technical documentation also identifies 22,016 available instructions for the device. This capacity supports embedded applications that combine USB firmware, communication stacks, control logic, and security routines.
What can replace PIC24FJ64GB204-E/ML on the same 44-QFN footprint?
PIC24FJ64GB204-I/ML is the closest same-package family alternative because it retains the PIC24FJ64GB204 device identity, 44-QFN 8 x 8 mm package, 64 KB Flash, and 8 KB RAM. PIC24FJ64GB002-I/ML and PIC24FJ64GA002-I/ML are also documented in same-package comparisons, but firmware, peripheral, and crypto compatibility must be checked before substitution. No pin-to-pin cross-manufacturer replacement was established.
Is PIC24FJ64GB204-E/ML suitable for low-power embedded security applications?
The PIC24FJ64GB204-E/ML is suitable for low-power embedded-security designs that need USB and cryptographic hardware in one compact controller. Microchip describes the family as a 16-bit eXtreme Low Power MCU with an integrated crypto module, 64 KB Flash, and 8 KB RAM. Sleep-mode behavior can reduce energy use between host transactions, while the integrated crypto hardware avoids allocating a separate MCU for basic protected operations.
PIC24FJ64GB204-E/ML vs PIC24FJ64GB204-I/ML: which is better?
PIC24FJ64GB204-E/ML is preferable when the design requires the extended automotive temperature grade, while PIC24FJ64GB204-I/ML is the industrial-temperature option in the same 44-QFN format. Both use the PIC24FJ64GB204 base device with 64 KB Flash, 8 KB RAM, USB, and integrated crypto hardware. Choose based on the required ambient-temperature range rather than core memory or peripheral capability.
When should I choose PIC24FJ64GB204-E/ML over PIC24FJ64GB002-I/ML?
Choose PIC24FJ64GB204-E/ML when the PCB requires the extended automotive temperature grade and the application benefits from the GB204 family's integrated crypto module and USB connectivity. PIC24FJ64GB002-I/ML remains useful when its verified peripheral configuration and temperature range satisfy the design. Because memory size alone does not establish software compatibility, compare the complete peripheral matrix and device identifiers.
Can PIC24FJ64GB002-I/ML replace PIC24FJ64GB204-E/ML?
PIC24FJ64GB002-I/ML may serve as a footprint-oriented replacement because both are identified in 44-QFN 8 x 8 mm comparisons, but it is not automatically a functional substitute. The GB002 and GB204 family members can differ in USB, crypto, memory, and peripheral assignments. Confirm pin-level compatibility, configuration-bit defaults, boot behavior, and firmware support in the manufacturer documentation before approving the substitution.
What is the best Microchip equivalent for PIC24FJ64GB204-E/ML?
PIC24FJ64GB204-I/ML is the best direct family candidate because it shares the GB204 base design, 64 KB Flash, 8 KB RAM, 32 MHz architecture, and 44-QFN 8 x 8 mm package. The primary selection difference is temperature grade: -E supports extended automotive conditions, whereas -I serves industrial temperature requirements. USB, crypto, and firmware compatibility remain aligned within the GB204 family.
Where can I buy PIC24FJ64GB204-E/ML and check its lead time?
Use the Request a Quote form on this page to request PIC24FJ64GB204-E/ML availability, current commercial terms, and the lead time required for your order quantity. The product is listed by Microchip Technology and appears in authorized distributor catalogs, but package form, production volume, and inventory status can change. Include the 44-QFN package and full -E/ML suffix in the request to avoid ambiguity.
What is the price of PIC24FJ64GB204-E/ML?
The current commercial price for PIC24FJ64GB204-E/ML is obtained through the Request a Quote form on this page. Quote requests should state the required quantity, package form, and target delivery date. This avoids relying on a stale unit price or confusing this exact automotive-temperature 44-QFN ordering code with the industrial -I/ML variant.
Is PIC24FJ64GB204-E/ML in stock?
Current PIC24FJ64GB204-E/ML inventory should be confirmed through the Request a Quote form on this page. A catalog or product-page listing alone does not guarantee that the exact suffix and package form are immediately available. Provide your required quantity, reel or tube preference, and production schedule so the fulfillment team can confirm the appropriate allocation.
How many I/O pins and interrupt sources does PIC24FJ64GB204 have?
The PIC24FJ64GB204 provides up to 34 I/O pins, 68 interrupt sources, and 4 trap sources in its 44-pin package. These figures make the device suitable for systems combining multiple sensors, control outputs, and asynchronous events. The exact multiplexed function of each physical pin varies by package and peripheral assignment, so use the manufacturer pin-description table when allocating PCB connections.
Which programming and debug tools support PIC24FJ64GB204-E/ML?
PIC24FJ64GB204 programming is supported through Microchip-compatible programming tools, and an ISP programmer listing specifically references the PIC24FJ64GB204 device. The exact debugger, programmer, adapter, and firmware support should be checked against the tool vendor's device list. Production designs should also confirm programming voltage, interface signals, and the supported package variant.

Impormasyon ng Talumpati sa Engineering for PIC24FJ64GB204-E/ML — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose PIC24FJ64GB204-E/ML when the product needs the GB204 feature set, specifically USB, an integrated crypto module, 64 KB of Flash, 8 KB of RAM, and the extended automotive temperature option. PIC24FJ64GB204-I/ML is the preferred same-footprint choice for industrial-temperature products because it retains the GB204 architecture and memory while changing the temperature designation. Consider PIC24FJ64GB002-I/ML when its verified peripheral set satisfies the design, but treat it as a functional-compatibility decision rather than a transparent replacement. PIC24FJ64GA002-I/ML may fit the same physical footprint, yet its GA-family feature differences require peripheral, boot, and firmware review. No cross-manufacturer drop-in replacement was established. For every candidate, confirm the complete pin matrix, configuration-bit defaults, USB implementation, programming support, exposed-pad connection, and production availability before PCB release.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto PIC24FJ64GB204-I/ML PIC24FJ64GB002-I/ML PIC24FJ64GA002-I/ML
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 44-QFN (8 x 8 mm) 44-QFN (8 x 8 mm) 44-QFN (8 x 8 mm) 44-QFN (8 x 8 mm)
Temperature Grade Extended automotive Industrial Industrial Industrial

Pangunahing mga Pagkakaiba

  • Integrated USB and cryptographic hardware (kumpara saPIC24FJ64GB002-I/ML)
  • Extended automotive temperature ordering option (kumpara saPIC24FJ64GB204-I/ML)
  • Compact 44-QFN integration (kumpara saPIC24FJ64GA002-I/ML)

Talaan ng Disenyo

Connect the 44-QFN exposed pad to the appropriate ground plane with a short, low-inductance path and follow the manufacturer land-pattern and thermal-via recommendations. Place input, output, and decoupling capacitors close to their associated pins rather than distributing them around the board perimeter. A continuous ground plane improves return-path continuity for USB and high-speed digital transitions.

Route the USB differential pair as a length-matched, impedance-controlled pair with minimal stubs and via transitions. Keep the pair away from clocks, switching inductors, and other potential aggressors. Reference the device pin-description table when assigning USB, communication, and alternate-function signals because the 44 QFN leads can support multiple peripheral functions.

Design the 2.0 V to 3.5 V operating range into the supply architecture, including startup sequencing, voltage tolerances, and local bypass capacitance. Use the manufacturer power-pin and decoupling tables to identify which supplies require separate capacitors. Verify brownout and sleep-mode behavior in the final firmware because transitions between active and low-power states can affect system-level power measurements.

Do not substitute a related PIC24FJ device solely because its memory size and package name match. Device identifiers can indicate changes in USB, cryptographic, boot, peripheral, and pin-function behavior. Before replacing PIC24FJ64GB204-E/ML, compare the exact ordering suffixes, peripheral matrix, configuration bits, boot requirements, programming support, and exposed-pad design in the manufacturer documentation.

Thermal performance depends on the exposed-pad copper area, via pattern, board construction, and ambient temperature. Estimate junction rise by combining measured or calculated device power with the PCB-specific thermal resistance, then verify the result against the maximum junction rating. Keep analog and precision-reference layouts away from the hottest region because temperature gradients can affect measurement calibration.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The -E ordering code denotes an extended automotive temperature option, but specific AEC-Q100, RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements require confirmation from the manufacturer product documentation.

Data napatotohanan sa: 2026-11-20 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

pic24fj64gb204 datasheet PIC24FJ64GB204-E/ML datasheet pdf PIC24FJ64GB204-E/ML pinout PIC24FJ64GB204-E/ML equivalent PIC24FJ64GB204-E/ML replacement PIC24FJ64GB204 44-QFN pinout PIC24FJ64GB204 64KB Flash 8KB RAM PIC24FJ64GB204 USB crypto microcontroller PIC24FJ64GB204 low power security PIC24FJ64GB204-E/ML price PIC24FJ64GB204-E/ML stock Microchip PIC24FJ64GB204-E/ML

Mga kaugnay na Mga Komponente at mga Tuntunin

Microchip Technology PIC24FJ64GB204-E/ML PIC24FJ64GB204 PIC24FJ64GB204-I/ML PIC24FJ64GB002-I/ML PIC24FJ64GA002-I/ML PIC24FJ series 16-bit microcontroller embedded microcontroller semiconductor eXtreme Low Power USB integrated crypto module Flash memory RAM 32 MHz ADC 44-QFN QFN family surface-mount package exposed pad automotive electronics embedded security industrial sensing
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ