PIC24FJ64GB204-E/ML - 16-Bit 32MHz USB MCU | Microchip
MPN: PIC24FJ64GB204-E/ML ✓ AktifPIC24FJ64GB204-E/ML Genel Bakış
A microcontroller is a semiconductor that combines a processor core, program memory, data memory, and peripherals on one integrated circuit. The PIC24FJ64GB204 belongs to the 16-bit embedded microcontroller hierarchy, combining a PIC24 core with USB, analog, timing, communication, and security peripherals. Its low-power feature set supports applications that spend substantial time in sleep or low-activity states while retaining fast wake-up behavior.
The principal features include 64 KB of Flash, 8 KB of RAM, a 32 MHz maximum operating frequency, USB connectivity, and an integrated crypto module. The device also provides up to 34 I/O pins, 68 interrupt sources, and 4 trap sources for embedded control. These resources allow firmware to combine local data acquisition, communication, control outputs, and secure operations in a single device.
The PIC24FJ64GB204 family uses a 16-bit architecture and is positioned for low-power embedded applications where USB and cryptographic hardware are valuable. The 44-pin QFN package reduces board area compared with larger leaded or fine-pitch alternatives, while the exposed-pad construction supports improved heat transfer when the device operates at sustained processing loads. The -E/ML ordering code identifies the automotive-temperature package variant.
Typical uses include USB-connected security tokens, low-power data loggers, portable measurement equipment, industrial sensing nodes, and compact consumer accessories. In these systems, USB can simplify connection to a host device while the integrated crypto module supports protected communications or credential handling. The 34 available I/O pins also allow designers to connect sensors, displays, communication peripherals, and digital control signals without adding a separate interface IC.
PCB design should provide a continuous ground plane, short decoupling paths, and careful exposed-pad connection. Place the device and its supporting components close to their associated power and signal nets, route USB differential pairs as a controlled impedance pair, and keep analog inputs away from high-current switching paths. The exact pin functions, exposed-pad connection, and recommended capacitor arrangement should be checked in the manufacturer pin-description table and application guidance.
This product page organizes the key MCU characteristics, package information, embedded-security context, and application guidance for engineers evaluating the PIC24FJ64GB204-E/ML. It also identifies pin-compatible family alternatives and highlights where USB, memory, temperature grade, and crypto requirements affect replacement decisions.
Drop-in alternatifler için PIC24FJ64GB204-E/ML — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller PIC24FJ64GB204-E/ML (aynı form faktörü ve ayağa oturma) — farklı olan Package, USB Interface, RoHS Status, ADC, Maximum CPU Speed.
PIC24FJ64GB204-I/ML
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →PIC24FJ64GB002-I/ML
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →PIC24FJ64GA002-I/ML
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →PIC24FJ64GB204-E/ML Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | 16-bit Flash microcontroller |
| Series | PIC24FJ64GB204 |
| Maximum CPU Frequency | 32 MHz |
| Flash Program Memory | 64 KB |
| Program Memory Organization | 64K x 8 |
| RAM | 8 KB |
| Available Instructions | 22,016 instructions |
| Operating Supply Range | 2.0 V to 3.5 V |
| Nominal Supply Voltage | 3.3 V |
| I/O Pin Count | 34 |
| Interrupt Sources | 68 |
| Trap Sources | 4 |
| USB Interface | USB |
| Crypto Hardware | Integrated crypto module |
| ADC Resolution | 10-bit or 12-bit software-selectable |
| ADC Maximum Conversion Rate | 400 ksps at 10-bit or 350 ksps at 12-bit |
| Paket | 44-QFN (8 x 8 mm) with exposed pad |
| Package Thickness | 0.9 mm |
| Montaj Türü | Surface mount |
| Temperature Grade | Extended automotive temperature grade |
PIC24FJ64GB204-E/ML 0.9 mm Pin Yapısı Kılavuzu
PIC24FJ64GB204-E/ML (0.9 mm paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: PIC24FJ64GB204-E/ML.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
PIC24FJ64GB204-E/ML için uygundur 6 uygulamas: USB Security Token, Low-Power Data Logger, Portable Measurement Instrument, Industrial Sensing Node, Secure Configuration Controller, Automotive Access and Control Module.
USB Security Token
The PIC24FJ64GB204-E/ML fits a compact USB security token because it combines a 32 MHz 16-bit core, 64 KB of Flash, 8 KB of RAM, USB connectivity, and an integrated crypto module in one 44-QFN package. Firmware can manage host authentication, device commands, session state, and protected data handling without requiring a separate crypto controller. Its 34 I/O pins provide expansion for secure elements, buttons, indicators, or sensor inputs, while the extended automotive temperature option supports harsher operating environments. USB bus layout, power management, and secure boot requirements still need careful validation.
Önerilen
Low-Power Data Logger
The PIC24FJ64GB204-E/ML is suitable for a low-power USB data logger because its eXtreme Low Power architecture can reduce activity during idle periods while retaining 64 KB of Flash and 8 KB of RAM for application code and buffered records. The 34 I/O pins allow connection of temperature, motion, pressure, or digital event inputs, and the integrated USB interface supports periodic host transfer. Developers should size the Flash for the required logging interval, use the manufacturer low-power mode guidance, and validate wake sources so that recorded data is not lost between host sessions.
Önerilen
Portable Measurement Instrument
The PIC24FJ64GB204-E/ML can control a portable measurement instrument that combines a sensor front end, local display, USB data exchange, and secure configuration updates. Its 10-bit or 12-bit software-selectable ADC supports applications requiring different conversion speed and resolution tradeoffs, while 68 interrupt sources help coordinate multiple capture events. The 44-QFN 8 x 8 mm package preserves board area in handheld instruments, and the integrated crypto module can protect transferred measurement or configuration data. Analog layout, calibration storage, and USB enumeration behavior remain important implementation considerations.
Önerilen
Industrial Sensing Node
The PIC24FJ64GB204-E/ML supports an industrial sensing node that must acquire local data, make decisions, and communicate through USB or another attached peripheral. Its 32 MHz processing rate provides headroom for protocol handling, while 64 KB of Flash and 8 KB of RAM suit compact embedded firmware. The -E ordering code extends the thermal option for demanding environments, although the design must still verify its complete operating-temperature limits. Use the 34 available I/O pins for digital sensors and actuators, and isolate analog inputs from USB and digital switching paths.
Önerilen
Secure Configuration Controller
The PIC24FJ64GB204-E/ML is appropriate for a secure configuration controller that stores device settings, authenticates commands, and exchanges protected records with a host or service equipment. The integrated crypto module supplies dedicated cryptographic capability, reducing the need to reserve a separate microcontroller for routine protected operations. Its 8 KB of RAM is sufficient for transient protocol buffers, and the 64 KB Flash stores firmware and configuration logic. Designers should confirm that the exact GB204 peripheral set matches the security workflow and that production programming, key provisioning, and certificate storage are integrated into the product lifecycle.
Önerilen
Automotive Access and Control Module
The PIC24FJ64GB204-E/ML can serve as the controller in a compact automotive access, diagnostic, or distributed control module that benefits from USB for service connectivity and cryptographic hardware for protected communication. The extended automotive temperature ordering code distinguishes it from the industrial-grade GB204-I/ML option. Thirty-four I/O pins permit integration of switches, sensors, indicators, and communication interfaces, while 32 MHz operation supports responsive control software. Automotive qualification, transient protection, ESD strategy, and exact AEC-Q100 status must be checked against the specific device documentation before production release.
Önerilen
Mühendislik referans verileri: PIC24FJ64GB204-E/ML — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | PIC24FJ64GB204-I/ML | PIC24FJ64GB002-I/ML | PIC24FJ64GA002-I/ML |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-QFN (8 x 8 mm) | 44-QFN (8 x 8 mm) | 44-QFN (8 x 8 mm) | 44-QFN (8 x 8 mm) |
| Temperature Grade | Extended automotive | Industrial | Industrial | Industrial |
Ana Farklılayıcılar
- Integrated USB and cryptographic hardware (karşılaştırma:PIC24FJ64GB002-I/ML)
- Extended automotive temperature ordering option (karşılaştırma:PIC24FJ64GB204-I/ML)
- Compact 44-QFN integration (karşılaştırma:PIC24FJ64GA002-I/ML)
Tasarım Notları
Connect the 44-QFN exposed pad to the appropriate ground plane with a short, low-inductance path and follow the manufacturer land-pattern and thermal-via recommendations. Place input, output, and decoupling capacitors close to their associated pins rather than distributing them around the board perimeter. A continuous ground plane improves return-path continuity for USB and high-speed digital transitions.
Route the USB differential pair as a length-matched, impedance-controlled pair with minimal stubs and via transitions. Keep the pair away from clocks, switching inductors, and other potential aggressors. Reference the device pin-description table when assigning USB, communication, and alternate-function signals because the 44 QFN leads can support multiple peripheral functions.
Design the 2.0 V to 3.5 V operating range into the supply architecture, including startup sequencing, voltage tolerances, and local bypass capacitance. Use the manufacturer power-pin and decoupling tables to identify which supplies require separate capacitors. Verify brownout and sleep-mode behavior in the final firmware because transitions between active and low-power states can affect system-level power measurements.
Do not substitute a related PIC24FJ device solely because its memory size and package name match. Device identifiers can indicate changes in USB, cryptographic, boot, peripheral, and pin-function behavior. Before replacing PIC24FJ64GB204-E/ML, compare the exact ordering suffixes, peripheral matrix, configuration bits, boot requirements, programming support, and exposed-pad design in the manufacturer documentation.
Thermal performance depends on the exposed-pad copper area, via pattern, board construction, and ambient temperature. Estimate junction rise by combining measured or calculated device power with the PCB-specific thermal resistance, then verify the result against the maximum junction rating. Keep analog and precision-reference layouts away from the hottest region because temperature gradients can affect measurement calibration.
Uyumluluk Bilgisi
The -E ordering code denotes an extended automotive temperature option, but specific AEC-Q100, RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements require confirmation from the manufacturer product documentation.