RTAX2000S-CGS624V - 2M-Gate Rad-Tolerant FPGA CG624 | Microchip
MPN: RTAX2000S-CGS624V ✓ NakahandaRTAX2000S-CGS624V Ulas
A radiation-tolerant FPGA is a field-programmable gate array designed to survive the total ionizing dose (TID) and single-event effects found in spaceflight orbits without the cost and schedule of a full radiation-hardened ASIC. In the programmable logic hierarchy, the RTAX-S family sits above commercial FPGAs (such as the Axcelerator family on which it is based) and below fully rad-hard devices, making it the workhorse choice for satellites, rovers, and scientific payloads.
Key features include up to four million equivalent system gates across the family, embedded SRAM with built-in FIFO control logic, segmentable clocks, chip-wide highway routing, and dedicated carry logic. The anti-fuse, one-time-programmable architecture provides live-at-power-up operation and true single-chip form factor, eliminating the need for external boot configuration devices and reducing susceptibility to configuration upsets.
Architecturally, the RTAX2000S is based on the Actel commercial Axcelerator family, enabling a documented design flow that lets customers prototype on the commercial Axcelerator equivalent and then target the same design to the RTAX-S/SL device, supported by Actel Extender circuit boards that map the commercial package footprint to the RTAX-S package footprint. This flow provides a cost-effective path from prototyping to space-flight silicon.
Typical applications include satellite payload data processing, spacecraft bus controllers and telemetry interfaces, and deep-space scientific instrument control, where low power consumption, single-chip integration, and radiation tolerance are mandatory.
A key design consideration: RTAX-S devices are one-time programmable, so full design sign-off (simulation, timing closure, and hardware prototyping, e.g., with the Aldec ACT-H3Ki-CG624 adaptor that mimics the CG624 footprint) must be completed before programming flight units.
This page synthesizes verified distributor data, same-family drop-in alternatives, and practical design notes beyond the manufacturer datasheet.
Mga alternatibo na pwedeng ilagay na RTAX2000S-CGS624V — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok RTAX2000S-CGS624V (parehas na form factor at footprint) — pagkakaiba sa Package, Configuration, Technology, Embedded Memory, Equivalent System Gates.
RTAX2000SL-1CGS624V
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →RTAX2000SL-1CGS624E
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →RTAX2000SL-1CGS624EV
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →RTAX2000S-1CG624PROTO
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →RTAX2000S-CGS624E
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
RTAX2000S-CGS624V Mga Pinakamataas na Rating at Electrical Characteristics
| Equivalent System Gates | 2000000 |
| Configurable Logic Blocks (CLBs) | 21504 |
| Logic Cells | 32256 |
| Technology | Digital CMOS, anti-fuse OTP |
| Core Supply Voltage (Nominal) | 1.5 V |
| Core Supply Voltage Range | 1.425 V to 1.575 V |
| Temperature na Operasyon | -55C to +125C |
| Packhaging | CG624 ceramic column grid array |
| Uri ng Pagpapasok | Surface Mount |
| Family | RTAX-S/SL Radiation-Tolerant FPGA |
| Configuration Type | One-Time Programmable (anti-fuse), live at power-up |
| Embedded Memory | Embedded SRAM with built-in FIFO control logic |
| Clocking | Segmentable clocks |
| Routing Features | Chip-wide highway routing, carry logic |
| Application Domain | Space-flight systems |
| Max Family Density | 4000000 equivalent system gates (family max) |
Gabay sa Pin Configuration ng RTAX2000S-CGS624V cg624 ceramic column grid array
Pin configuration para sa RTAX2000S-CGS624V (cg624 ceramic column grid array package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa RTAX2000S-CGS624V.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
RTAX2000S-CGS624V ay nararapat para sa 6 aplikasyons: Satellite Payload Data Processing, Spacecraft Bus Control and Telemetry, Deep-Space Scientific Instruments, Launch Vehicle Avionics, Earth Observation Imaging Systems, Radiation-Tolerant Prototyping and Design Migration.
Satellite Payload Data Processing
The RTAX2000S-CGS624V fits payload data processing because its 2,000,000 equivalent gates and 21,504 CLBs provide the logic capacity needed for on-board compression, formatting, and channelization of sensor data, while embedded SRAM with built-in FIFO control implements buffering without external memory. Its anti-fuse architecture is live at power-up in a true single-chip form factor, so no boot flash is needed - reducing board area, parts count, and configuration-upset risk in orbit. The -55C to +125C operating range covers typical payload bay environments. Placed as the main payload FPGA between the sensor front end and the downlink formatter, it delivers deterministic, single-chip processing, with the trade-off that one-time programmability requires fully verified designs before flight-lot programming.
Inirekomenda
Spacecraft Bus Control and Telemetry
For spacecraft bus controllers, the RTAX2000S-CGS624V integrates command decoding, telemetry formatting, and interface glue logic in one radiation-tolerant device, eliminating separate ASIC development cost and schedule. The chip-wide highway routing and segmentable clocks support multiple independent functional blocks - reaction-wheel interfaces, telemetry encoders, and watch-dog logic - at modest clock rates, while low-power consumption suits the always-on bus avionics load. Its 1.5V core (1.425V-1.575V) simplifies integration with modern low-voltage bus electronics. Designers should allocate the embedded SRAM/FIFO blocks for CCSDS frame buffering, and note that the -55C to +125C qualification envelope supports unheated equipment bays without supplemental thermal control.
Inirekomenda
Deep-Space Scientific Instruments
Deep-space instruments benefit from the RTAX2000S-CGS624V's radiation tolerance and single-chip, live-at-power-up operation, which is critical where repair is impossible and configuration memory upsets are unacceptable. The 32,256-cell architecture with carry logic efficiently implements detector readout sequencing, DSP pre-processing filters, and instrument control state machines, while segmentable clocks allow low-power regions to run at reduced frequency. Embedded SRAM with FIFO control buffers high-rate detector data before downlink. Because the RTAX-S family offers densities to four million gates, instrument teams can scale within one design flow. The one-time-programmable anti-fuse technology removes configuration-storage devices that would otherwise be single-event-upset liabilities on multi-year cruises.
Inirekomenda
Launch Vehicle Avionics
Launch vehicle flight computers and stage controllers use the RTAX2000S-CGS624V where vibration-tolerant single-chip logic, wide -55C to +125C operation, and deterministic power-up are required. The anti-fuse configuration survives the shock, vibration, and radiation environments of ascent without latch-up-prone configuration memories, and the 1.5V core keeps dynamic power within typical avionics power allocations. Carry-logic chains and highway routing implement flight-critical sequencers, safety interlocks, and redundant-voting logic. Typical deployments instantiate triple-modular-redundancy in fabric; the 21,504 CLB capacity accommodates TMR overhead that would exhaust smaller devices. Designers should complete timing closure with worst-case space-grade corners before programming flight units.
Inirekomenda
Earth Observation Imaging Systems
Earth-observation cameras and SAR front ends use the RTAX2000S-CGS624V to perform image acquisition timing, defect correction, and data formatting at high throughput. The embedded SRAM with FIFO control logic lines up pixel streams between the focal-plane electronics and the mass-memory unit, while 2,000,000 gates accommodate channel-alignment and calibration datapaths without external glue logic. Low static power and single-chip integration reduce the thermal design burden on the payload's radiators. The CG624 column grid array provides the high pin count and mechanical robustness needed for focal-plane I/O. Because imaging pipelines are iterative, the recommended flow prototypes on Axcelerator commercial silicon or the Aldec CG624 adaptor before committing anti-fuse flight units.
Inirekomenda
Radiation-Tolerant Prototyping and Design Migration
The RTAX2000S-CGS624V participates in a cost-effective design migration flow: developers target the commercial Axcelerator equivalent first, using Actel Extender circuit boards that map the commercial package footprint to the RTAX-S package footprint, then transfer the verified design to RTAX-S silicon. Aldec's ACT-H3Ki-CG624 adaptor, carrying a ProASIC3E flash FPGA, assembles directly in the RTAX chip's place on the target board, providing reprogrammable prototyping that OTP anti-fuse parts cannot. This methodology preserves the CG624 land pattern throughout, eliminating PCB respins, and satisfies the full simulation/timing sign-off that one-time-programmable flight devices demand. It dramatically reduces the cost risk of space-qualified FPGA development programs.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for RTAX2000S-CGS624V — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | RTAX2000SL-1CGS624V | RTAX2000SL-1CGS624E | RTAX2000SL-1CGS624EV | RTAX2000S-1CG624PROTO | RTAX2000S-CGS624E |
|---|---|---|---|---|---|---|
| Package | CG624 ceramic column grid array | CG624 - same | CG624 - same | CG624 - same | CG624 - same | CG624 - same |
| Brand | Microchip Technology (Actel/Microsemi) | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Equivalent Gates | 2,000,000 | 2,000,000 | 2,000,000 | 2,000,000 | 2,000,000 | 2,000,000 |
| CLBs / Cells | 21,504 / 32,256 | 21,504 / 32,256 | 21,504 / 32,256 | 21,504 / 32,256 | 21,504 / 32,256 | 21,504 / 32,256 |
| Speed Grade | Standard | -1 (faster) | -1 (faster) | -1 (faster) | -1 (faster) | Standard |
| Power Variant | Standard (S) | Low-power (SL) | Low-power (SL) | Low-power (SL) | Standard (S) | Standard (S) |
| Configuration Technology | Anti-fuse OTP, live at power-up | Anti-fuse OTP | Anti-fuse OTP | Anti-fuse OTP | Anti-fuse OTP | Anti-fuse OTP |
| Core Supply Voltage | 1.5 V (1.425-1.575 V) | 1.5 V (1.425-1.575 V) | 1.5 V (1.425-1.575 V) | 1.5 V (1.425-1.575 V) | 1.5 V (1.425-1.575 V) | 1.5 V (1.425-1.575 V) |
Pangunahing mga Pagkakaiba
- Single-chip live-at-power-up operation (kumpara saSRAM-FPGA space alternatives)
- Low-power SL variant available on the same footprint (kumpara saRTAX2000SL-1CGS624V)
- Faster -1 speed grade options (kumpara saRTAX2000S-CGS624E)
- Commercial-equivalent prototyping flow (kumpara saRTAX2000S-1CG624PROTO)
Talaan ng Disenyo
RTAX-S devices are anti-fuse one-time programmable: a mis-programmed flight unit is unrecoverable. Complete the full design sign-off recommended in the Microchip design flow - simulation, static timing closure at worst-case space corners, and hardware prototyping on the commercial Axcelerator equivalent or the Aldec ACT-H3Ki-CG624 flash-based adaptor (which assembles directly in the RTAX chip's place on the CG624 footprint) - before programming any flight units. Budget for prototype iterations in the program schedule.
The RTAX2000S-CGS624V requires a nominal 1.5V core supply regulated to 1.425V-1.575V per Microchip USA's series specification. Provide a low-noise point-of-load regulator with bulk and high-frequency decoupling at the CG624 power balls, and consult the RTAX-S/SL datasheet (DS2169) for I/O bank supply rails and sequencing. For power-limited missions, evaluate the RTAX2000SL-1CGS624V low-power variant, which shares the same footprint so no PCB change is needed.
The CG624 ceramic column grid array has a dense 624-column footprint; follow the Microchip RTAX-S package land-pattern and via-fanout recommendations exactly, since ceramic column BGA rework in flight hardware is effectively impossible. Route power on dedicated planes, keep configuration and JTAG nets short and protected, and verify thermal relief for the -55C to +125C operating envelope during board-level thermal analysis before design freeze.
Impormasyon ng Pagsunod sa Kautusan
Compliance data for space-grade ceramic-package RTAX-S devices was not present in the provided web data; ceramic column grid array packages for space flight may be exempt from certain RoHS requirements. Verify with Microchip product compliance documentation.
