STMicroelectronics

STM8S207R8T6TR - 24MHz 8-Bit MCU 64KB Flash | STMicroelectronics (Tape & Reel)

MPN: STM8S207R8T6TR ✓ Nakahanda
3 V to 5.5 V Vdss LFQP64 Package 24 MHz Speed 64 KB Memory
MOQ: 1 |

STM8S207R8T6TR Ulas

The STMicroelectronics STM8S207R8T6TR is a 24 MHz, 8-bit STM8S20xxx performance-line microcontroller with 64 KB of Flash program memory, integrated EEPROM, and a 64-pin LQFP package. It executes up to 20 MIPS at 24 MHz and combines an advanced 10-bit ADC with timers, two UARTs, SPI, I²C, and CAN connectivity.

An 8-bit microcontroller is a compact processor optimized for embedded control, measurement, communications, and automation. The STM8S207R8T6TR belongs to STMicroelectronics' STM8S family and is positioned as a high-density performance-line device. Its combination of EEPROM, serial peripherals, and CAN support allows designers to consolidate control logic that would otherwise require several discrete components.

Principal features include a 24 MHz maximum CPU frequency, 64 KB of Flash memory, integrated EEPROM, and 10-bit analog-to-digital conversion. The device also provides 38 I/O ports, two UART interfaces, SPI and I²C serial buses, and CAN capability. A 3 V to 5.5 V operating-voltage range supports both 3.3 V and 5 V system architectures while allowing integration across industrial controls, communications equipment, and consumer products.

The STM8 architecture provides a direct execution path for embedded firmware without an external instruction-memory interface. Hardware peripherals support serial data exchange, analog measurement, timing, and bus communication, reducing external component count and helping consolidate application logic. Maximum CPU operation at 24 MHz provides 20 MIPS of nominal instruction throughput, which is useful for responsive control loops and protocol handling.

Typical applications include industrial automation controllers, CAN-connected equipment, serial data concentrators, motor and process control, programmable logic controllers, and compact consumer appliances. Its three principal bus and communication resources—UART, SPI, and I²C—support sensors, displays, transceivers, and external nonvolatile storage, while the 10-bit ADC supports analog monitoring.

Design the PCB with short, terminated clock routes, decoupled supply pins, and a continuous ground plane. Confirm peripheral multiplexing, alternate-function assignments, and the 64-pin package pinout against the manufacturer documentation before finalizing routing. Firmware validation should include startup timing, watchdog behavior, bus contention, and CAN termination requirements for the selected system topology.

This page consolidates the device's principal specifications, same-package replacement options, application guidance, and design considerations into a practical engineering reference. It also distinguishes verified electrical attributes from parameters that still require confirmation from the official STM8S207x datasheet and reference manual.

Mga alternatibo na pwedeng ilagay na STM8S207R8T6TR — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok STM8S207R8T6TR (parehas na form factor at footprint) — pagkakaiba sa Package, ADC Resolution, CAN Interface, Flash Program Memory, SPI Interface.

STMicroelectronics
Package: LQFP-64 (10x10 mm, 0.5 mm pitch)
Ikabit sa STM8S207R8T6TR →
STMicroelectronics
ADC Resolution: 10 bits
Ikabit sa STM8S207R8T6TR →
STMicroelectronics
ADC Resolution: 10 bits
Ikabit sa STM8S207R8T6TR →
STMicroelectronics
Package: 64-LQFP, 10 x 10 mm
ADC Resolution: 10 bits
CAN Interface: 1 interface
Ikabit sa STM8S207R8T6TR →

STM8S207R8T3

✅ Drop-In
STMicroelectronics
📦 LFQP64
8-bit microcontroller (MCU) · STMicroelectronics · STM8S performance line · 24 MHz · STM8 8-bit core · 64 KB · 64K x 8 bits · 3 V to 5.5 V

Magkontak para sa presyo

Tingnan ang Datasheet →

STM8S207R8T3TR

✅ Drop-In
STMicroelectronics
📦 LFQP64
8-bit microcontroller (MCU) · STMicroelectronics · STM8S performance line · 24 MHz · STM8 8-bit core · 64 KB · 64K x 8 bits · 3 V to 5.5 V

Magkontak para sa presyo

Tingnan ang Datasheet →

STM8S207R8T6C

✅ Drop-In
📦 LFQP64
Same STM8S207R8 base configuration and LFQP64 package; C suffix differs, with exact ordering-code meaning requiring manufacturer confirmation

📋 Alternatibo na Reference (hindi sa katalogo)

STM8S207R6T6

✅ Drop-In
STMicroelectronics
📦 LFQP64
STM8S 8-bit CISC Harvard · 32 KB · 2 KB · 1.5 KB (data EEPROM area) · 24 MHz · 20 MIPS at 24 MHz · 2.95 V to 5.5 V · -40 C to +85 C

Magkontak para sa presyo

Tingnan ang Datasheet →

STM8S207RBT6

✅ Drop-In
STMicroelectronics
📦 LFQP64
8-bit RISC microcontroller · STM8S performance line · 24 MHz · 20 MIPS at 24 MHz · 128 KB · 128K x 8 bits · Harvard architecture with 3-stage pipeline

Magkontak para sa presyo

Tingnan ang Datasheet →

STM8S207R8T6TR Mga Pinakamataas na Rating at Electrical Characteristics

Product Type 8-bit microcontroller
Series STM8S20xxx performance line
Maximum CPU Frequency 24 MHz
Instruction Throughput 20 MIPS at 24 MHz
Flash Program Memory 64 KB
Flash Organization 64K x 8
EEPROM Integrated
ADC Resolution 10 bit
UART Count 2
SPI Interface 1
I²C Interface 1
CAN Interface 1
I/O Port Count 38
Supply Voltage Range 3 V to 5.5 V
Packhaging LFQP64
Katayuan ng Lifecycle Active
Timer Support Integrated timers
Manufacturer STMicroelectronics

Gabay sa Pin Configuration ng STM8S207R8T6TR lfqp64

Pin configuration para sa STM8S207R8T6TR (lfqp64 package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng lfqp64 package para sa STM8S207R8T6TR

Wala ng detalyadong pinout data na magagamit para sa STM8S207R8T6TR.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

STM8S207R8T6TR ay nararapat para sa 6 aplikasyons: CAN-Connected Industrial Control, Programmable Logic Controller, Serial Data Concentrator, Process and Environmental Monitoring, Motor and Actuator Control, Consumer Appliance Controller.

🏭

CAN-Connected Industrial Control

The STM8S207R8T6TR fits compact CAN nodes because its 24 MHz, 8-bit CPU provides up to 20 MIPS while the device integrates CAN, two UARTs, SPI, and I²C. A controller can acquire analog signals through the 10-bit ADC, execute control logic, update local indicators, and exchange diagnostic data without requiring several separate interface chips. Its 64 KB Flash provides useful room for protocol handling and application firmware, while 38 I/O ports support sensors, actuators, and status LEDs. For a CAN bus installation, terminate both ends of the bus in the standard manner defined by the network design and keep sensitive analog and communication routing separated.

⚡

Programmable Logic Controller

The STM8S207R8T6TR is suitable for PLC and machine-control modules because it combines 64 KB Flash, integrated EEPROM, timers, a 10-bit ADC, and several serial interfaces in one device. The 24 MHz core supports responsive digital sequencing, while EEPROM can retain configuration parameters locally. Two UARTs allow simultaneous connection to operator interfaces or diagnostics, and SPI or I²C can serve external sensors, memory, or display peripherals. Use the 38 available I/O ports for discrete inputs and outputs where pin multiplexing permits. Firmware should include debounce, timeout, and safe-state behavior because a microcontroller-based controller must maintain a defined output state during reset or communications loss.

🌐

Serial Data Concentrator

The STM8S207R8T6TR works well in a serial concentrator that must merge data from several peripheral buses. Its two UART channels can support human-readable or point-to-point links, while SPI and I²C provide dedicated connections for sensors, memory, or transceiver devices. With a maximum CPU frequency of 24 MHz and 20 MIPS throughput, the MCU can format and validate messages without offloading basic control tasks. The 64 KB Flash capacity is useful for protocol conversion and configuration firmware, and integrated EEPROM can preserve node-specific settings. Keep each communication interface's signal integrity requirements in mind, especially when UART rates are high or I²C bus capacitance approaches its limit.

🧩

Process and Environmental Monitoring

The STM8S207R8T6TR is appropriate for process-monitoring equipment that combines analog measurement with local communications. Its 10-bit ADC can sample sensor inputs, while the 24 MHz core performs filtering, threshold checks, and configurable control actions. The 38 I/O ports expand the available digital inputs and outputs for alarms, relay drive, or status indicators. Integrated EEPROM provides a convenient location for calibration constants and configuration records, and the 3 V to 5.5 V operating range supports common embedded supply levels. For accurate measurements, design the analog front end around the ADC input range and acquisition requirements, and isolate high-current switching paths to reduce coupling into the sensor signals.

🔧

Motor and Actuator Control

The STM8S207R8T6TR can serve as the supervisory controller in a motor or actuator assembly where the design requires local logic, analog feedback, and communication. Its timers support timing functions, the 10-bit ADC can monitor position or supply feedback, and the available UART and CAN interfaces allow commands and diagnostics from a higher-level controller. The 24 MHz CPU provides sufficient responsiveness for coordinated state-machine execution and fault handling. The 38 I/O ports permit direct connection to position sensors, limit inputs, and driver-control signals when alternate-function requirements permit. Keep motor-driver power paths separate from sensitive MCU traces and define shutdown behavior for timeout, reset, and communications-loss conditions.

📱

Consumer Appliance Controller

The STM8S207R8T6TR supports compact consumer-appliance control by combining an 8-bit core, 64 KB Flash, EEPROM, ADC, timers, and multiple serial interfaces. It can manage user inputs, sense analog feedback, drive displays or indicators, and communicate with external sensors or accessory modules. The 3 V to 5.5 V supply range accommodates common appliance architectures, while 38 I/O ports provide substantial control capacity. Integrated EEPROM can retain settings without continuous external memory use. Designers should account for motor noise, relay transients, and mains-isolated safety boundaries, even when the control section itself operates from a low-voltage rail. Firmware should include safe shutdown and fault-indication behavior.

What is the STM8S207R8T6TR?
The STM8S207R8T6TR is an STMicroelectronics 8-bit STM8S20xxx performance-line microcontroller operating at up to 24 MHz and delivering up to 20 MIPS. According to the STM8S207R8 manufacturer product information, it includes 64 KB of Flash memory, integrated EEPROM, a 10-bit ADC, timers, two UARTs, SPI, I²C, and CAN in an LFQP64 package.
What is the operating voltage of STM8S207R8T6TR?
The STM8S207R8T6TR operates from 3 V to 5.5 V. This range supports 3.3 V and 5 V embedded systems while allowing the MCU, ADC, communications peripherals, and connected sensors to share a compatible supply domain. Confirm individual pin limits, analog-supply requirements, and power-sequencing conditions in the manufacturer datasheet before finalizing a multi-rail design.
How much Flash memory does STM8S207R8T6TR have?
The STM8S207R8T6TR contains 64 KB of Flash program memory, organized as 64K x 8. According to STMicroelectronics' STM8S207R8 product information, the STM8S20xxx family covers devices from 32 KB through 128 KB of Flash. The exact bootloader, option-byte, and application-memory partition must be confirmed from the programming manual before deployment.
Where can I download the STM8S207R8T6TR datasheet PDF?
The official STM8S207R8 product page is available at https://www.st.com/en/microcontrollers-microprocessors/stm8s207r8.html and provides the manufacturer's technical documentation for the STM8S207x family. The family datasheet contains electrical characteristics, package information, pin definitions, memory mapping, and peripheral descriptions. Use the product page's document links to select the current revision.
Where can I find the STM8S207R8T6TR pinout?
The STM8S207R8T6TR pinout is published in the STM8S207x family datasheet and the official STM8S207R8 product-page document set. The device uses a 64-pin LFQP package, and its pin assignments include power, ground, clock, reset, programming/debug, analog inputs, and multiplexed GPIO functions. Use the pin-description table to assign PCB tracks rather than inferring positions from a generic package drawing.
What are the key specifications of STM8S207R8T6TR that engineers should know?
The key specifications are a 24 MHz maximum CPU frequency, up to 20 MIPS, 64 KB of Flash, integrated EEPROM, a 10-bit ADC, 38 I/O ports, two UARTs, SPI, I²C, CAN, and a 3 V to 5.5 V supply range. According to the STM8S207R8 manufacturer product information, these resources support compact embedded-control, communications, and analog-measurement designs in an LFQP64 package.
What can replace STM8S207R8T6TR?
The closest documented replacements are same-package STM8S207R8 variants and closely related STM8S207R6 and STM8S207RB devices. STM8S207R8T3 and STM8S207R8T3TR use the same 64-pin family package but are identified as temperature-grade variants; STM8S207R6T6 and STM8S207RBT6 change available Flash capacity to 32 KB or 128 KB respectively. Verify memory requirements and temperature grade before substitution.
Is STM8S207R8T6TR the same as STM8S207R8T3?
No. STM8S207R8T6TR and STM8S207R8T3 share the STM8S207R8 device family and 64-pin package, but their suffix codes identify different manufacturer temperature grades. The T6 designation corresponds to the -40 °C to 85 °C range, while T3 corresponds to -40 °C to 125 °C. Use T3 when the wider industrial temperature range is required and T6 when the standard range is sufficient.
What is the best STMicroelectronics equivalent for STM8S207R8T6TR?
STM8S207R8T3 is the closest STMicroelectronics alternative when the PCB may remain unchanged and the higher -40 °C to 125 °C grade is acceptable. STM8S207R8T3TR provides the same temperature-grade positioning with reel-oriented ordering. Both retain the 64-pin STM8S207R8 package and 64 KB Flash configuration, but firmware, production-temperature, and marking requirements should still be reviewed.
STM8S207R8T6TR vs STM8S207RBT6 — which should I choose?
Choose STM8S207R8T6TR when 64 KB of Flash is sufficient; choose STM8S207RBT6 when the firmware may exceed that capacity. Both are identified as 64-pin STM8S207R-family devices, while the RB version provides 128 KB of Flash compared with 64 KB for the R8 version. The larger memory can reduce external-storage requirements but does not by itself guarantee drop-in suitability without package and pinout verification.
When should I choose STM8S207R8T6TR over STM8S207R6T6?
Choose STM8S207R8T6TR when the application needs more than the 32 KB Flash capacity associated with STM8S207R6T6, particularly for larger protocol stacks, diagnostics, or application code. Both devices are identified within the STM8S207 family and use a 64-pin package, but firmware size, bootloader assumptions, and peripheral configuration must be reviewed before using the lower-memory device as a substitute.
Is STM8S207R8T6TR suitable for industrial control systems?
The STM8S207R8T6TR is suitable for many industrial-control applications because it combines a 24 MHz 8-bit CPU, 64 KB Flash, integrated EEPROM, 10-bit ADC, timers, and multiple serial interfaces. Its 3 V to 5.5 V supply range supports conventional embedded industrial rails. Choose the T3 variant for operation across -40 °C to 125 °C when the equipment requires the wider temperature range.
Where to buy STM8S207R8T6TR online?
Use the Request a Quote form on this page to ask about STM8S207R8T6TR availability, current lead time, and order quantities. The form is the appropriate purchasing path for this quote-oriented listing. Before releasing an order, confirm the exact suffix, LFQP64 package, temperature grade, Flash capacity, and delivery condition against the manufacturer documentation.
What is the price of STM8S207R8T6TR?
The current commercial terms for STM8S207R8T6TR are available through the Request a Quote form on this page. Provide the required quantity, target package, temperature grade, and delivery location so procurement can return the appropriate commercial response. Do not use generic family-level price indications as a firm quote for this exact 64 KB Flash and 64-pin device.
Is STM8S207R8T6TR in stock and what is its lead time?
Current stock and lead-time status for STM8S207R8T6TR should be requested through the Request a Quote form on this page. Include the required order quantity and delivery schedule in the request. Because inventory and manufacturing schedules fluctuate, engineers should not base a production commitment on an unconfirmed listing until the manufacturer channel confirms the exact MPN and order conditions.

Impormasyon ng Talumpati sa Engineering for STM8S207R8T6TR — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the STM8S207R8T6TR for embedded applications requiring a 24 MHz 8-bit MCU, 64 KB Flash, integrated EEPROM, a 10-bit ADC, two UARTs, SPI, I²C, CAN, and operation from 3 V to 5.5 V in an LFQP64 package. Select STM8S207R8T3 or STM8S207R8T3TR when the same memory configuration is needed but the wider -40 °C to 125 °C grade is required. STM8S207R6T6 is appropriate only when 32 KB Flash is sufficient; STM8S207RBT6 is preferable when 128 KB Flash is useful. STM8S207R8T6TRC requires confirmation of its exact ordering-code meaning before substitution. Because firmware size, temperature, pin multiplexing, and peripheral configuration directly affect compatibility, compare the complete MPN and manufacturer documentation before releasing a new PCB or production build.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto STM8S207R8T3 STM8S207R8T3TR STM8S207R8T6TRC STM8S207R6T6 STM8S207RBT6
Package LFQP64 LFQP64 - same LFQP64 - same LFQP64 - same LFQP64 - same LFQP64 - same
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Product Type 8-bit microcontroller 8-bit microcontroller 8-bit microcontroller 8-bit microcontroller 8-bit microcontroller 8-bit microcontroller

Pangunahing mga Pagkakaiba

  • Balanced Flash capacity for performance-line embedded control (kumpara saSTM8S207R6T6)
  • Standard temperature grade for cost-sensitive industrial designs (kumpara saSTM8S207R8T3)
  • Integrated communications reduce external interface-device count (kumpara saSTM8S207R8T6TRC)

Talaan ng Disenyo

Route the 24 MHz clock from the oscillator or external clock source to the relevant MCU pins with the shortest practical path, and keep the path away from CAN, UART, SPI, and ADC inputs. Follow the manufacturer layout guidance for decoupling, ground continuity, and oscillator placement. Since the STM8S207R8T6TR provides 38 I/O ports in an LFQP64 package, assign multiplexed functions early because one physical pin may serve GPIO, timer, serial, or analog functions.

Place the required supply and bypass capacitors adjacent to their associated VDD and VSS pins, using the values and placement specified by the manufacturer. The STM8S207R8T6TR operates across 3 V to 5.5 V, but analog and digital supply requirements should be reviewed individually. Verify startup, reset, and brownout behavior for 3.3 V and 5 V implementations rather than assuming that every supply configuration has identical timing.

Do not substitute STM8S207R6T6 or STM8S207RBT6 solely because the package matches. STM8S207R6T6 provides 32 KB of Flash rather than 64 KB, while STM8S207RBT6 provides 128 KB. The larger part may preserve the same basic peripheral set, but firmware size, option bytes, startup behavior, and application assumptions must be checked before using either as a substitute.

Keep the CAN and other communication interfaces away from switching power nodes, relay coils, and high-current motor traces. Apply the termination scheme required by the network topology at the physical bus endpoints, and provide a continuous ground reference for the interface. Separate analog sensor routing from digital and communications paths to reduce noise coupling into the 10-bit ADC and improve repeatability in process-control measurements.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was established for this exact MPN. Check the current manufacturer product documentation and declaration before procurement.

Kaugnay na Hanapin

STM8S207R8T6TR datasheet STM8S207R8T6TR pinout STM8S207R8T6TR datasheet pdf STM8S207R8T6TR specifications STM8S207R8T6TR equivalent STM8S207R8T6TR replacement STM8S207R8T6TR drop-in replacement STM8S207R8T6TR price STM8S207R8T6TR stock STMicroelectronics STM8S207R8T6TR STM8S207R8T6TR vs STM8S207RBT6 STM8S207R8 LFQP64 pinout STM8S207R8 CAN application STM8S207R8 24MHz microcontroller

Mga kaugnay na Mga Komponente at mga Tuntunin

STMicroelectronics STM8S207R8T6TR STM8S207R8T3 STM8S207R8T3TR STM8S207R8T6TRC STM8S207R6T6 STM8S207RBT6 STM8S207R8 STM8S20xxx STM8 8-bit microcontroller embedded microcontroller microcontroller semiconductor Flash program memory EEPROM 10-bit ADC UART SPI I²C CAN LFQP64 LQFP surface mount 3.3 V 5 V
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ