STM8S207R8T6TR - 24MHz 8-Bit MCU 64KB Flash | STMicroelectronics (Tape & Reel)
부품 번호: STM8S207R8T6TR ✓ 활성STM8S207R8T6TR 개요
An 8-bit microcontroller is a compact processor optimized for embedded control, measurement, communications, and automation. The STM8S207R8T6TR belongs to STMicroelectronics' STM8S family and is positioned as a high-density performance-line device. Its combination of EEPROM, serial peripherals, and CAN support allows designers to consolidate control logic that would otherwise require several discrete components.
Principal features include a 24 MHz maximum CPU frequency, 64 KB of Flash memory, integrated EEPROM, and 10-bit analog-to-digital conversion. The device also provides 38 I/O ports, two UART interfaces, SPI and I²C serial buses, and CAN capability. A 3 V to 5.5 V operating-voltage range supports both 3.3 V and 5 V system architectures while allowing integration across industrial controls, communications equipment, and consumer products.
The STM8 architecture provides a direct execution path for embedded firmware without an external instruction-memory interface. Hardware peripherals support serial data exchange, analog measurement, timing, and bus communication, reducing external component count and helping consolidate application logic. Maximum CPU operation at 24 MHz provides 20 MIPS of nominal instruction throughput, which is useful for responsive control loops and protocol handling.
Typical applications include industrial automation controllers, CAN-connected equipment, serial data concentrators, motor and process control, programmable logic controllers, and compact consumer appliances. Its three principal bus and communication resources—UART, SPI, and I²C—support sensors, displays, transceivers, and external nonvolatile storage, while the 10-bit ADC supports analog monitoring.
Design the PCB with short, terminated clock routes, decoupled supply pins, and a continuous ground plane. Confirm peripheral multiplexing, alternate-function assignments, and the 64-pin package pinout against the manufacturer documentation before finalizing routing. Firmware validation should include startup timing, watchdog behavior, bus contention, and CAN termination requirements for the selected system topology.
This page consolidates the device's principal specifications, same-package replacement options, application guidance, and design considerations into a practical engineering reference. It also distinguishes verified electrical attributes from parameters that still require confirmation from the official STM8S207x datasheet and reference manual.
드롭인 대체품: STM8S207R8T6TR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: STM8S207R8T6TR (동일 폼 팩터 및 풋프린트) — 차이점: Package, ADC Resolution, CAN Interface, Flash Program Memory, SPI Interface.
STM8S207R8T3
✅ 드롭인가격 문의
데이터시트 보기 →STM8S207R8T3TR
✅ 드롭인가격 문의
데이터시트 보기 →STM8S207R8T6C
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
STM8S207R6T6
✅ 드롭인가격 문의
데이터시트 보기 →STM8S207RBT6
✅ 드롭인가격 문의
데이터시트 보기 →STM8S207R8T6TR 최대 정격 & 전기적 특성
| Product Type | 8-bit microcontroller |
| Series | STM8S20xxx performance line |
| Maximum CPU Frequency | 24 MHz |
| Instruction Throughput | 20 MIPS at 24 MHz |
| Flash Program Memory | 64 KB |
| Flash Organization | 64K x 8 |
| EEPROM | Integrated |
| ADC Resolution | 10 bit |
| UART Count | 2 |
| SPI Interface | 1 |
| I²C Interface | 1 |
| CAN Interface | 1 |
| I/O Port Count | 38 |
| Supply Voltage Range | 3 V to 5.5 V |
| 패키지 | LFQP64 |
| 수명 주기 상태 | Active |
| Timer Support | Integrated timers |
| Manufacturer | STMicroelectronics |
STM8S207R8T6TR lfqp64 핀 구성 가이드
STM8S207R8T6TR(lfqp64 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: STM8S207R8T6TR.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
STM8S207R8T6TR 적합 용도: 6 애플리케이션s: CAN-Connected Industrial Control, Programmable Logic Controller, Serial Data Concentrator, Process and Environmental Monitoring, Motor and Actuator Control, Consumer Appliance Controller.
CAN-Connected Industrial Control
The STM8S207R8T6TR fits compact CAN nodes because its 24 MHz, 8-bit CPU provides up to 20 MIPS while the device integrates CAN, two UARTs, SPI, and I²C. A controller can acquire analog signals through the 10-bit ADC, execute control logic, update local indicators, and exchange diagnostic data without requiring several separate interface chips. Its 64 KB Flash provides useful room for protocol handling and application firmware, while 38 I/O ports support sensors, actuators, and status LEDs. For a CAN bus installation, terminate both ends of the bus in the standard manner defined by the network design and keep sensitive analog and communication routing separated.
Programmable Logic Controller
The STM8S207R8T6TR is suitable for PLC and machine-control modules because it combines 64 KB Flash, integrated EEPROM, timers, a 10-bit ADC, and several serial interfaces in one device. The 24 MHz core supports responsive digital sequencing, while EEPROM can retain configuration parameters locally. Two UARTs allow simultaneous connection to operator interfaces or diagnostics, and SPI or I²C can serve external sensors, memory, or display peripherals. Use the 38 available I/O ports for discrete inputs and outputs where pin multiplexing permits. Firmware should include debounce, timeout, and safe-state behavior because a microcontroller-based controller must maintain a defined output state during reset or communications loss.
Serial Data Concentrator
The STM8S207R8T6TR works well in a serial concentrator that must merge data from several peripheral buses. Its two UART channels can support human-readable or point-to-point links, while SPI and I²C provide dedicated connections for sensors, memory, or transceiver devices. With a maximum CPU frequency of 24 MHz and 20 MIPS throughput, the MCU can format and validate messages without offloading basic control tasks. The 64 KB Flash capacity is useful for protocol conversion and configuration firmware, and integrated EEPROM can preserve node-specific settings. Keep each communication interface's signal integrity requirements in mind, especially when UART rates are high or I²C bus capacitance approaches its limit.
Process and Environmental Monitoring
The STM8S207R8T6TR is appropriate for process-monitoring equipment that combines analog measurement with local communications. Its 10-bit ADC can sample sensor inputs, while the 24 MHz core performs filtering, threshold checks, and configurable control actions. The 38 I/O ports expand the available digital inputs and outputs for alarms, relay drive, or status indicators. Integrated EEPROM provides a convenient location for calibration constants and configuration records, and the 3 V to 5.5 V operating range supports common embedded supply levels. For accurate measurements, design the analog front end around the ADC input range and acquisition requirements, and isolate high-current switching paths to reduce coupling into the sensor signals.
Motor and Actuator Control
The STM8S207R8T6TR can serve as the supervisory controller in a motor or actuator assembly where the design requires local logic, analog feedback, and communication. Its timers support timing functions, the 10-bit ADC can monitor position or supply feedback, and the available UART and CAN interfaces allow commands and diagnostics from a higher-level controller. The 24 MHz CPU provides sufficient responsiveness for coordinated state-machine execution and fault handling. The 38 I/O ports permit direct connection to position sensors, limit inputs, and driver-control signals when alternate-function requirements permit. Keep motor-driver power paths separate from sensitive MCU traces and define shutdown behavior for timeout, reset, and communications-loss conditions.
Consumer Appliance Controller
The STM8S207R8T6TR supports compact consumer-appliance control by combining an 8-bit core, 64 KB Flash, EEPROM, ADC, timers, and multiple serial interfaces. It can manage user inputs, sense analog feedback, drive displays or indicators, and communicate with external sensors or accessory modules. The 3 V to 5.5 V supply range accommodates common appliance architectures, while 38 I/O ports provide substantial control capacity. Integrated EEPROM can retain settings without continuous external memory use. Designers should account for motor noise, relay transients, and mains-isolated safety boundaries, even when the control section itself operates from a low-voltage rail. Firmware should include safe shutdown and fault-indication behavior.
엔지니어링 참조 데이터: STM8S207R8T6TR — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | STM8S207R8T3 | STM8S207R8T3TR | STM8S207R8T6TRC | STM8S207R6T6 | STM8S207RBT6 |
|---|---|---|---|---|---|---|
| Package | LFQP64 | LFQP64 - same | LFQP64 - same | LFQP64 - same | LFQP64 - same | LFQP64 - same |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Product Type | 8-bit microcontroller | 8-bit microcontroller | 8-bit microcontroller | 8-bit microcontroller | 8-bit microcontroller | 8-bit microcontroller |
주요 차별점
- Balanced Flash capacity for performance-line embedded control (vs STM8S207R6T6)
- Standard temperature grade for cost-sensitive industrial designs (vs STM8S207R8T3)
- Integrated communications reduce external interface-device count (vs STM8S207R8T6TRC)
설계 노트
Route the 24 MHz clock from the oscillator or external clock source to the relevant MCU pins with the shortest practical path, and keep the path away from CAN, UART, SPI, and ADC inputs. Follow the manufacturer layout guidance for decoupling, ground continuity, and oscillator placement. Since the STM8S207R8T6TR provides 38 I/O ports in an LFQP64 package, assign multiplexed functions early because one physical pin may serve GPIO, timer, serial, or analog functions.
Place the required supply and bypass capacitors adjacent to their associated VDD and VSS pins, using the values and placement specified by the manufacturer. The STM8S207R8T6TR operates across 3 V to 5.5 V, but analog and digital supply requirements should be reviewed individually. Verify startup, reset, and brownout behavior for 3.3 V and 5 V implementations rather than assuming that every supply configuration has identical timing.
Do not substitute STM8S207R6T6 or STM8S207RBT6 solely because the package matches. STM8S207R6T6 provides 32 KB of Flash rather than 64 KB, while STM8S207RBT6 provides 128 KB. The larger part may preserve the same basic peripheral set, but firmware size, option bytes, startup behavior, and application assumptions must be checked before using either as a substitute.
Keep the CAN and other communication interfaces away from switching power nodes, relay coils, and high-current motor traces. Apply the termination scheme required by the network topology at the physical bus endpoints, and provide a continuous ground reference for the interface. Separate analog sensor routing from digital and communications paths to reduce noise coupling into the 10-bit ADC and improve repeatability in process-control measurements.
규정 준수 정보
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was established for this exact MPN. Check the current manufacturer product documentation and declaration before procurement.