SY88927VZC - 2.5Gbps Differential Receiver | Microchip | 8-SOIC
MPN: SY88927VZC ✓ NakahandaSY88927VZC Ulas
A high-speed differential receiver is an interface IC that compares a pair of complementary signals and produces a logic output representing their relative state. Differential signaling reduces sensitivity to common-mode noise, while the receiver restores a usable digital signal for the receiving logic. Within the broader semiconductor hierarchy, this device belongs to the interface IC family and functions as a high-speed signal-conditioning component rather than as a processor, memory device, or power converter.
The SY88927VZC supports supply voltages from 3 V to 5.5 V, enabling operation in both 3.3 V and 5 V systems. Its maximum frequency is 3.0 GHz, while its nominal differential data rate is 2.5 Gbps. Internal 75 kΩ input pull-down resistors help establish a defined state when an input is open. The manufacturer also describes the device as a faster version of the SY100EL16V with 100K ECL-compatible I/O and improved output waveform characteristics.
The receiver uses a differential input arrangement and a single-ended output. The datasheet identifies separate supply-related pins, including VBB, and states that VBB is suitable only as a bias because its current sourcing and sinking capability is limited. The VBB pin should be bypassed to the most positive supply with a 0.01 µF capacitor. Under an open-input condition, internal input clamps force the Q output low, providing defined behavior for an unconnected interface.
Typical uses include clock and data recovery, high-speed backplane communication, telecommunications equipment, parallel data buses, and test and measurement systems. The receiver is particularly useful when a transmitter sends a low-amplitude differential pair over a cable, PCB trace, or connector and the receiving logic requires a single-ended digital signal. Its 3.0 GHz maximum frequency provides additional timing margin for systems operating at the 2.5 Gbps nominal data rate.
PCB implementation requires short, geometry-controlled differential traces, solid reference planes, and close decoupling of the supply pins. Input and output return paths should avoid discontinuities that create impedance mismatches and reflections. The receiver should be placed near the connector or transmitter when trace length, loss, and crosstalk would otherwise degrade the differential signal. Use the manufacturer pin-description and layout guidance when assigning tracks and connecting bypass capacitors.
This product page combines the device's interface characteristics with practical application analysis, sourcing guidance, verified source links, and an explicit comparison of the available drop-in alternatives. The comparison also distinguishes electrical interchangeability from mere package similarity, helping engineers determine whether a proposed substitute preserves both the 8-SOIC footprint and the relevant high-speed receiver behavior.
Mga alternatibo na pwedeng ilagay na SY88927VZC — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Wala ng magagamit na drop-in alternatibo para sa produkto na ito.
Hilingin ang AlternatiboSY88927VZC Mga Spesipikasyon
| Product Type | High-speed differential receiver |
| Rate ng Data | 2.5 Gbps |
| Maximum Frequency | 3.0 GHz |
| Supply Voltage Range | 3 V to 5.5 V |
| Supply Options | 3.3 V and 5 V |
| Number of Receivers | 1 receiver |
| Number of Drivers | 0 drivers |
| Input Pull-Down Resistance | 75 kΩ |
| Output Interface | 100K ECL-compatible |
| Packhaging | 8-pin SOIC |
| Package Width | 3.90 mm |
| Uri ng Pagpapasok | Surface-mount |
| VBB Bypass Capacitor | 0.01 µF |
| Open-Input Output State | Q output forced low |
| Standard Packaging Quantity | 95 units |
Gabay sa Pin Configuration ng SY88927VZC 3.90 mm
Pin configuration para sa SY88927VZC (3.90 mm package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa SY88927VZC.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
SY88927VZC ay nararapat para sa 6 aplikasyons: High-Speed Backplane Interfaces, Telecommunications Data Recovery, Clock Distribution and Recovery, Parallel Data Buses, Test and Measurement Equipment, Industrial Control and Instrumentation.
High-Speed Backplane Interfaces
The SY88927VZC fits point-to-point links that carry a clock or data pair across a controlled backplane. Its 2.5 Gbps nominal rate and 3.0 GHz maximum frequency provide timing margin for a receiver operating at the stated data rate, while differential detection improves tolerance to common-mode voltage differences between the transmitting and receiving circuitry. Place the device near the connector or transceiver to limit loss and reflections, and maintain continuous impedance-controlled routing over a reference plane. Confirm the source amplitude, edge rate, jitter budget, termination network, and receiver-output loading against the manufacturer electrical characteristics before releasing the layout.
Telecommunications Data Recovery
The SY88927VZC is appropriate for telecommunications equipment that receives a high-speed differential signal and requires a single-ended ECL-compatible output. The 3 V to 5.5 V operating range supports 3.3 V and 5 V system rails, and the one-receiver, zero-driver organization makes it a focused signal-conditioning element rather than a transceiver. Its 2.5 Gbps data rate and 3.0 GHz maximum frequency suit high-speed clock and data paths where source timing and channel loss remain controlled. The internal 75 kΩ pull-downs and forced-low open-input behavior help establish defined logic states during startup or disconnected conditions.
Clock Distribution and Recovery
The SY88927VZC can recover a single-ended clock from a low-amplitude differential clock pair when clock distribution uses ECL-compatible signaling. Its improved output waveform characteristics and 3.0 GHz maximum operating frequency provide useful margin at the nominal 2.5 Gbps signaling rate. Keep the differential trace geometry and impedance uniform, minimize branching, and locate the receiver close to the clock-consuming circuitry. Evaluate deterministic and random jitter, duty-cycle distortion, output timing, and the relationship between frequency and data rate in the complete clock path rather than relying on the receiver's maximum frequency alone.
Parallel Data Buses
The SY88927VZC can serve as the receiving element for one channel of a parallel data bus implemented with differential signaling. The differential input and 100K ECL-compatible output simplify the interface between a high-speed source and receiving logic. Its 2.5 Gbps nominal data rate supports short-reach, point-to-point channels when signal integrity is maintained through controlled routing and termination. Place decoupling capacitors close to the supply pins, provide a low-impedance ground reference, and verify setup and hold timing at the receiving logic. The receiver should not be treated as a complete transceiver because it provides no driver output.
Test and Measurement Equipment
The SY88927VZC is useful in test and measurement equipment that must condition a high-speed differential source before a counter, analyzer, or logic block. Its 2.5 Gbps nominal data rate and 3.0 GHz maximum frequency allow it to support high-speed test interfaces, while the 3.3 V and 5 V supply options accommodate mixed instrument architectures. Use short traces, suitable source and load terminations, and separate sensitive return paths to avoid converting common-mode noise or reflections into timing errors. The open-input pull-down behavior provides a defined receiver state during setup, although test-system state machines should still validate signal presence before interpreting the Q output.
Industrial Control and Instrumentation
The SY88927VZC can support high-speed differential links in industrial control, instrumentation, and data-acquisition equipment where the interconnection is electrically controlled rather than a long-distance communication channel. The 3 V to 5.5 V supply range supports common embedded rail voltages, and the receiver's defined open-input state improves system behavior during startup or cable disconnection. Design the interface to meet industrial temperature requirements separately, because the operating-temperature limits are not identified in the available product listing. Use the manufacturer electrical data to verify signal thresholds, output timing, supply-current limits, and performance across the intended process and environmental conditions.
Impormasyon ng Talumpati sa Engineering for SY88927VZC — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto |
|---|---|
| Brand | Microchip Technology |
| Package | 8-pin SOIC |
| Product Type | High-speed differential receiver |
| Number of Receivers | 1 receiver |
| Number of Drivers | 0 drivers |
| Nominal Data Rate | 2.5 Gbps |
| Maximum Frequency | 3.0 GHz |
| Supply Voltage Range | 3 V to 5.5 V |
| Input Pull-Down Resistance | 75 kΩ |
| Output Compatibility | 100K ECL-compatible |
| Open-Input Output State | Q output forced low |
Pangunahing mga Pagkakaiba
- Higher nominal signaling rate than the referenced EL16V device (kumpara saSY100EL16V)
- Defined behavior for an open differential input (kumpara saSY100EL16V)
- Supports both common high-speed system supply levels (kumpara saSY100EL16V)
Talaan ng Disenyo
Route the SY88927VZC differential input as a controlled-impedance pair over a continuous reference plane. Match the pair spacing to the PCB stack-up, avoid vias and geometry changes where possible, and keep the receiver close to the connector or transmitter. At a 2.5 Gbps nominal rate, discontinuities can produce reflections and timing errors that are not apparent from the receiver's stated maximum frequency alone.
Follow the Microchip manufacturer datasheet when connecting VBB. This pin is intended only as a bias because its current sourcing and sinking capability is limited. When VBB is used, bypass it to the most positive supply with a 0.01 µF capacitor and place the bypass component close to the relevant device pins. Confirm the supply rails and VBB arrangement against the electrical-characteristics section before fabrication.
Do not treat any 8-SOIC differential receiver as an automatic replacement for the SY88927VZC. Verify the numbered pin functions, differential thresholds, output levels, propagation delay, supply range, data rate, and package dimensions. The internal 75 kΩ pull-downs provide a defined state for an open input, but they do not replace a deliberate bias, termination, or system-level fault-detection strategy.
Impormasyon ng Pagsunod sa Kautusan
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement is identified in the available product information.