SY88927VZC - 2.5Gbps Differential Receiver | Microchip | 8-SOIC
料号: SY88927VZC ✓ 量产中SY88927VZC 概述
A high-speed differential receiver is an interface IC that compares a pair of complementary signals and produces a logic output representing their relative state. Differential signaling reduces sensitivity to common-mode noise, while the receiver restores a usable digital signal for the receiving logic. Within the broader semiconductor hierarchy, this device belongs to the interface IC family and functions as a high-speed signal-conditioning component rather than as a processor, memory device, or power converter.
The SY88927VZC supports supply voltages from 3 V to 5.5 V, enabling operation in both 3.3 V and 5 V systems. Its maximum frequency is 3.0 GHz, while its nominal differential data rate is 2.5 Gbps. Internal 75 kΩ input pull-down resistors help establish a defined state when an input is open. The manufacturer also describes the device as a faster version of the SY100EL16V with 100K ECL-compatible I/O and improved output waveform characteristics.
The receiver uses a differential input arrangement and a single-ended output. The datasheet identifies separate supply-related pins, including VBB, and states that VBB is suitable only as a bias because its current sourcing and sinking capability is limited. The VBB pin should be bypassed to the most positive supply with a 0.01 µF capacitor. Under an open-input condition, internal input clamps force the Q output low, providing defined behavior for an unconnected interface.
Typical uses include clock and data recovery, high-speed backplane communication, telecommunications equipment, parallel data buses, and test and measurement systems. The receiver is particularly useful when a transmitter sends a low-amplitude differential pair over a cable, PCB trace, or connector and the receiving logic requires a single-ended digital signal. Its 3.0 GHz maximum frequency provides additional timing margin for systems operating at the 2.5 Gbps nominal data rate.
PCB implementation requires short, geometry-controlled differential traces, solid reference planes, and close decoupling of the supply pins. Input and output return paths should avoid discontinuities that create impedance mismatches and reflections. The receiver should be placed near the connector or transmitter when trace length, loss, and crosstalk would otherwise degrade the differential signal. Use the manufacturer pin-description and layout guidance when assigning tracks and connecting bypass capacitors.
This product page combines the device's interface characteristics with practical application analysis, sourcing guidance, verified source links, and an explicit comparison of the available drop-in alternatives. The comparison also distinguishes electrical interchangeability from mere package similarity, helping engineers determine whether a proposed substitute preserves both the 8-SOIC footprint and the relevant high-speed receiver behavior.
直接替换替代料: SY88927VZC ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料SY88927VZC 规格参数
| Product Type | High-speed differential receiver |
| 数据速率 | 2.5 Gbps |
| Maximum Frequency | 3.0 GHz |
| Supply Voltage Range | 3 V to 5.5 V |
| Supply Options | 3.3 V and 5 V |
| Number of Receivers | 1 receiver |
| Number of Drivers | 0 drivers |
| Input Pull-Down Resistance | 75 kΩ |
| Output Interface | 100K ECL-compatible |
| 封装 | 8-pin SOIC |
| Package Width | 3.90 mm |
| 安装类型 | Surface-mount |
| VBB Bypass Capacitor | 0.01 µF |
| Open-Input Output State | Q output forced low |
| Standard Packaging Quantity | 95 units |
SY88927VZC 3.90 mm 引脚配置指南
SY88927VZC(3.90 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: SY88927VZC.
请参阅 数据手册 以查看完整引脚配置。
典型应用
SY88927VZC 适用于 6 应用s: High-Speed Backplane Interfaces, Telecommunications Data Recovery, Clock Distribution and Recovery, Parallel Data Buses, Test and Measurement Equipment, Industrial Control and Instrumentation.
High-Speed Backplane Interfaces
The SY88927VZC fits point-to-point links that carry a clock or data pair across a controlled backplane. Its 2.5 Gbps nominal rate and 3.0 GHz maximum frequency provide timing margin for a receiver operating at the stated data rate, while differential detection improves tolerance to common-mode voltage differences between the transmitting and receiving circuitry. Place the device near the connector or transceiver to limit loss and reflections, and maintain continuous impedance-controlled routing over a reference plane. Confirm the source amplitude, edge rate, jitter budget, termination network, and receiver-output loading against the manufacturer electrical characteristics before releasing the layout.
Telecommunications Data Recovery
The SY88927VZC is appropriate for telecommunications equipment that receives a high-speed differential signal and requires a single-ended ECL-compatible output. The 3 V to 5.5 V operating range supports 3.3 V and 5 V system rails, and the one-receiver, zero-driver organization makes it a focused signal-conditioning element rather than a transceiver. Its 2.5 Gbps data rate and 3.0 GHz maximum frequency suit high-speed clock and data paths where source timing and channel loss remain controlled. The internal 75 kΩ pull-downs and forced-low open-input behavior help establish defined logic states during startup or disconnected conditions.
Clock Distribution and Recovery
The SY88927VZC can recover a single-ended clock from a low-amplitude differential clock pair when clock distribution uses ECL-compatible signaling. Its improved output waveform characteristics and 3.0 GHz maximum operating frequency provide useful margin at the nominal 2.5 Gbps signaling rate. Keep the differential trace geometry and impedance uniform, minimize branching, and locate the receiver close to the clock-consuming circuitry. Evaluate deterministic and random jitter, duty-cycle distortion, output timing, and the relationship between frequency and data rate in the complete clock path rather than relying on the receiver's maximum frequency alone.
Parallel Data Buses
The SY88927VZC can serve as the receiving element for one channel of a parallel data bus implemented with differential signaling. The differential input and 100K ECL-compatible output simplify the interface between a high-speed source and receiving logic. Its 2.5 Gbps nominal data rate supports short-reach, point-to-point channels when signal integrity is maintained through controlled routing and termination. Place decoupling capacitors close to the supply pins, provide a low-impedance ground reference, and verify setup and hold timing at the receiving logic. The receiver should not be treated as a complete transceiver because it provides no driver output.
Test and Measurement Equipment
The SY88927VZC is useful in test and measurement equipment that must condition a high-speed differential source before a counter, analyzer, or logic block. Its 2.5 Gbps nominal data rate and 3.0 GHz maximum frequency allow it to support high-speed test interfaces, while the 3.3 V and 5 V supply options accommodate mixed instrument architectures. Use short traces, suitable source and load terminations, and separate sensitive return paths to avoid converting common-mode noise or reflections into timing errors. The open-input pull-down behavior provides a defined receiver state during setup, although test-system state machines should still validate signal presence before interpreting the Q output.
Industrial Control and Instrumentation
The SY88927VZC can support high-speed differential links in industrial control, instrumentation, and data-acquisition equipment where the interconnection is electrically controlled rather than a long-distance communication channel. The 3 V to 5.5 V supply range supports common embedded rail voltages, and the receiver's defined open-input state improves system behavior during startup or cable disconnection. Design the interface to meet industrial temperature requirements separately, because the operating-temperature limits are not identified in the available product listing. Use the manufacturer electrical data to verify signal thresholds, output timing, supply-current limits, and performance across the intended process and environmental conditions.
工程参考数据: SY88927VZC ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Brand | Microchip Technology |
| Package | 8-pin SOIC |
| Product Type | High-speed differential receiver |
| Number of Receivers | 1 receiver |
| Number of Drivers | 0 drivers |
| Nominal Data Rate | 2.5 Gbps |
| Maximum Frequency | 3.0 GHz |
| Supply Voltage Range | 3 V to 5.5 V |
| Input Pull-Down Resistance | 75 kΩ |
| Output Compatibility | 100K ECL-compatible |
| Open-Input Output State | Q output forced low |
关键差异点
- Higher nominal signaling rate than the referenced EL16V device (对比 SY100EL16V)
- Defined behavior for an open differential input (对比 SY100EL16V)
- Supports both common high-speed system supply levels (对比 SY100EL16V)
设计说明
Route the SY88927VZC differential input as a controlled-impedance pair over a continuous reference plane. Match the pair spacing to the PCB stack-up, avoid vias and geometry changes where possible, and keep the receiver close to the connector or transmitter. At a 2.5 Gbps nominal rate, discontinuities can produce reflections and timing errors that are not apparent from the receiver's stated maximum frequency alone.
Follow the Microchip manufacturer datasheet when connecting VBB. This pin is intended only as a bias because its current sourcing and sinking capability is limited. When VBB is used, bypass it to the most positive supply with a 0.01 µF capacitor and place the bypass component close to the relevant device pins. Confirm the supply rails and VBB arrangement against the electrical-characteristics section before fabrication.
Do not treat any 8-SOIC differential receiver as an automatic replacement for the SY88927VZC. Verify the numbered pin functions, differential thresholds, output levels, propagation delay, supply range, data rate, and package dimensions. The internal 75 kΩ pull-downs provide a defined state for an open input, but they do not replace a deliberate bias, termination, or system-level fault-detection strategy.
合规信息
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement is identified in the available product information.