Microchip Technology

SY88927VZC - 2.5Gbps Differential Receiver | Microchip | 8-SOIC

MPN: SY88927VZC ✓ فعال
3 V to 5.5 V Vdss 75 kΩ Rds(on) 8-pin SOIC Package 3.0 GHz Speed
حداقل سفارش: 1 |

SY88927VZC نمای کلی

The Microchip Technology SY88927VZC is a 2.5 Gbps high-speed differential receiver with a maximum operating frequency of 3.0 GHz, 3.3 V and 5 V supply options, and an 8-pin SOIC package. It accepts one differential input and provides a digital receiver output, making it suitable for high-speed backplanes, clock distribution, parallel-to-serial interfaces, and other systems requiring reliable conversion of small differential signals into a single-ended logic output.

A high-speed differential receiver is an interface IC that compares a pair of complementary signals and produces a logic output representing their relative state. Differential signaling reduces sensitivity to common-mode noise, while the receiver restores a usable digital signal for the receiving logic. Within the broader semiconductor hierarchy, this device belongs to the interface IC family and functions as a high-speed signal-conditioning component rather than as a processor, memory device, or power converter.

The SY88927VZC supports supply voltages from 3 V to 5.5 V, enabling operation in both 3.3 V and 5 V systems. Its maximum frequency is 3.0 GHz, while its nominal differential data rate is 2.5 Gbps. Internal 75 kΩ input pull-down resistors help establish a defined state when an input is open. The manufacturer also describes the device as a faster version of the SY100EL16V with 100K ECL-compatible I/O and improved output waveform characteristics.

The receiver uses a differential input arrangement and a single-ended output. The datasheet identifies separate supply-related pins, including VBB, and states that VBB is suitable only as a bias because its current sourcing and sinking capability is limited. The VBB pin should be bypassed to the most positive supply with a 0.01 µF capacitor. Under an open-input condition, internal input clamps force the Q output low, providing defined behavior for an unconnected interface.

Typical uses include clock and data recovery, high-speed backplane communication, telecommunications equipment, parallel data buses, and test and measurement systems. The receiver is particularly useful when a transmitter sends a low-amplitude differential pair over a cable, PCB trace, or connector and the receiving logic requires a single-ended digital signal. Its 3.0 GHz maximum frequency provides additional timing margin for systems operating at the 2.5 Gbps nominal data rate.

PCB implementation requires short, geometry-controlled differential traces, solid reference planes, and close decoupling of the supply pins. Input and output return paths should avoid discontinuities that create impedance mismatches and reflections. The receiver should be placed near the connector or transmitter when trace length, loss, and crosstalk would otherwise degrade the differential signal. Use the manufacturer pin-description and layout guidance when assigning tracks and connecting bypass capacitors.

This product page combines the device's interface characteristics with practical application analysis, sourcing guidance, verified source links, and an explicit comparison of the available drop-in alternatives. The comparison also distinguishes electrical interchangeability from mere package similarity, helping engineers determine whether a proposed substitute preserves both the 8-SOIC footprint and the relevant high-speed receiver behavior.

جایگزین‌های drop-in برای SY88927VZC — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

هیچ جایگزین مستقیمی برای این محصول موجود نیست.

درخواست جایگزین

SY88927VZC مشخصات

Product Type High-speed differential receiver
نرخ داده 2.5 Gbps
Maximum Frequency 3.0 GHz
Supply Voltage Range 3 V to 5.5 V
Supply Options 3.3 V and 5 V
Number of Receivers 1 receiver
Number of Drivers 0 drivers
Input Pull-Down Resistance 75 kΩ
Output Interface 100K ECL-compatible
بسته‌بندی 8-pin SOIC
Package Width 3.90 mm
نوع نصب Surface-mount
VBB Bypass Capacitor 0.01 µF
Open-Input Output State Q output forced low
Standard Packaging Quantity 95 units

راهنمای پیکربندی پین SY88927VZC 3.90 mm

پیکربندی پین برای SY88927VZC (پکیج 3.90 mm). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 3.90 mm برای SY88927VZC

داده پین‌آوت تفصیلی موجود نیست برای SY88927VZC.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

SY88927VZC مناسب است برای 6 کاربردs: High-Speed Backplane Interfaces, Telecommunications Data Recovery, Clock Distribution and Recovery, Parallel Data Buses, Test and Measurement Equipment, Industrial Control and Instrumentation.

🌐

High-Speed Backplane Interfaces

The SY88927VZC fits point-to-point links that carry a clock or data pair across a controlled backplane. Its 2.5 Gbps nominal rate and 3.0 GHz maximum frequency provide timing margin for a receiver operating at the stated data rate, while differential detection improves tolerance to common-mode voltage differences between the transmitting and receiving circuitry. Place the device near the connector or transceiver to limit loss and reflections, and maintain continuous impedance-controlled routing over a reference plane. Confirm the source amplitude, edge rate, jitter budget, termination network, and receiver-output loading against the manufacturer electrical characteristics before releasing the layout.

📡

Telecommunications Data Recovery

The SY88927VZC is appropriate for telecommunications equipment that receives a high-speed differential signal and requires a single-ended ECL-compatible output. The 3 V to 5.5 V operating range supports 3.3 V and 5 V system rails, and the one-receiver, zero-driver organization makes it a focused signal-conditioning element rather than a transceiver. Its 2.5 Gbps data rate and 3.0 GHz maximum frequency suit high-speed clock and data paths where source timing and channel loss remain controlled. The internal 75 kΩ pull-downs and forced-low open-input behavior help establish defined logic states during startup or disconnected conditions.

🖥️

Clock Distribution and Recovery

The SY88927VZC can recover a single-ended clock from a low-amplitude differential clock pair when clock distribution uses ECL-compatible signaling. Its improved output waveform characteristics and 3.0 GHz maximum operating frequency provide useful margin at the nominal 2.5 Gbps signaling rate. Keep the differential trace geometry and impedance uniform, minimize branching, and locate the receiver close to the clock-consuming circuitry. Evaluate deterministic and random jitter, duty-cycle distortion, output timing, and the relationship between frequency and data rate in the complete clock path rather than relying on the receiver's maximum frequency alone.

⚡

Parallel Data Buses

The SY88927VZC can serve as the receiving element for one channel of a parallel data bus implemented with differential signaling. The differential input and 100K ECL-compatible output simplify the interface between a high-speed source and receiving logic. Its 2.5 Gbps nominal data rate supports short-reach, point-to-point channels when signal integrity is maintained through controlled routing and termination. Place decoupling capacitors close to the supply pins, provide a low-impedance ground reference, and verify setup and hold timing at the receiving logic. The receiver should not be treated as a complete transceiver because it provides no driver output.

🔧

Test and Measurement Equipment

The SY88927VZC is useful in test and measurement equipment that must condition a high-speed differential source before a counter, analyzer, or logic block. Its 2.5 Gbps nominal data rate and 3.0 GHz maximum frequency allow it to support high-speed test interfaces, while the 3.3 V and 5 V supply options accommodate mixed instrument architectures. Use short traces, suitable source and load terminations, and separate sensitive return paths to avoid converting common-mode noise or reflections into timing errors. The open-input pull-down behavior provides a defined receiver state during setup, although test-system state machines should still validate signal presence before interpreting the Q output.

🏭

Industrial Control and Instrumentation

The SY88927VZC can support high-speed differential links in industrial control, instrumentation, and data-acquisition equipment where the interconnection is electrically controlled rather than a long-distance communication channel. The 3 V to 5.5 V supply range supports common embedded rail voltages, and the receiver's defined open-input state improves system behavior during startup or cable disconnection. Design the interface to meet industrial temperature requirements separately, because the operating-temperature limits are not identified in the available product listing. Use the manufacturer electrical data to verify signal thresholds, output timing, supply-current limits, and performance across the intended process and environmental conditions.

What is the SY88927VZC?
The SY88927VZC is a 2.5 Gbps high-speed differential receiver with a 3.0 GHz maximum operating frequency, supplied in an 8-pin SOIC package. According to the Microchip manufacturer datasheet, it provides one receiver and no drivers, accepts differential signaling, and produces a 100K ECL-compatible output. It is intended for high-speed clock, data, backplane, and telecommunications interfaces.
What is the operating voltage of SY88927VZC?
The SY88927VZC operates from 3 V to 5.5 V and supports both 3.3 V and 5 V supply configurations. According to the Microchip manufacturer datasheet, the VBB pin is a bias connection rather than a general-purpose supply output. When VBB is used, it must be bypassed to the most positive supply through a 0.01 µF capacitor.
What is the maximum data rate of SY88927VZC?
The SY88927VZC supports a nominal differential data rate of 2.5 Gbps and a maximum operating frequency of 3.0 GHz. According to the Microchip manufacturer datasheet, its faster output transition characteristics make it appropriate for high-frequency sources. Actual link margin still depends on loss, jitter, trace geometry, source termination, and receiver sensitivity.
Where to download the SY88927VZC datasheet PDF?
The manufacturer-hosted SY88927V datasheet PDF is available from Microchip's product-document server. It contains the electrical characteristics, pin descriptions, supply and bias guidance, receiver behavior, and application information needed to evaluate the SY88927VZC. Use the package-specific pin description when assigning PCB tracks, particularly for the VBB bypass connection.
Where can I find the SY88927VZC pinout?
The SY88927VZC pin assignment is found in the Microchip manufacturer datasheet, which identifies the 8-pin SOIC differential input, receiver output, supply, ground, and VBB connections. The available manufacturer documentation does not expose the full numbered pin table in the search excerpt, so the pinout field is intentionally left unpopulated rather than assigning labels without confirmation.
Is SY88927VZC suitable for 3.3V and 5V systems?
Yes, the SY88927VZC supports both 3.3 V and 5 V operation within its stated 3 V to 5.5 V supply range. According to the Microchip manufacturer datasheet, the device is designed for 5 V and 3.3 V power-supply options. Confirm signal-level compatibility and timing margins in the target system before replacing another receiver.
What happens when the SY88927VZC input is open?
The SY88927VZC forces its Q output low when an input is open or pulled to VEE because internal input clamps establish a defined condition. According to the Microchip manufacturer datasheet, this behavior helps prevent an uncontrolled output state. The receiver also includes internal 75 kΩ input pull-down resistors.
How does SY88927VZC compare with SY100EL16V?
The SY88927VZC is described by Microchip as a faster version of the SY100EL16V, with 100K ECL-compatible I/O and improved output waveform characteristics. According to the Microchip manufacturer datasheet, its nominal data rate is 2.5 Gbps and maximum frequency is 3.0 GHz. Direct substitution also requires matching the 8-pin SOIC footprint and verifying every pin function.
What is the best drop-in replacement for SY88927VZC?
No verified drop-in replacement is established by the available manufacturer and distributor information. A valid replacement must use the same 8-pin SOIC footprint, preserve pin-to-pin functions, and match the relevant 2.5 Gbps data rate, 3.0 GHz maximum frequency, 3 V to 5.5 V supply range, and ECL-compatible output behavior. Request a manufacturer cross-reference and engineering review before committing to a substitute.
What can replace SY88927VZC?
A substitute for SY88927VZC must first be confirmed as pin-compatible in the 8-pin SOIC package and then checked for equivalent high-speed receiver behavior. Package similarity alone is insufficient for a 2.5 Gbps interface. Use the Microchip cross-reference search or request a quote for an engineering review of candidate drop-in parts rather than assuming that any 8-SOIC differential receiver is interchangeable.
Is SY88927VZC the same as an EL16V-family receiver?
The SY88927VZC is functionally related to EL16V-family devices but offers higher performance in this application. According to the Microchip manufacturer datasheet, it is a faster version of the SY100EL16V, reaches 2.5 Gbps, and provides improved output waveform characteristics. It should be treated as a drop-in candidate only after confirming package dimensions and the exact pin assignment.
When should I choose SY88927VZC for a high-speed interface?
Choose the SY88927VZC when a design needs one differential input converted to a 100K ECL-compatible output at up to 2.5 Gbps. According to the Microchip manufacturer datasheet, the device supports a 3.0 GHz maximum frequency and 3.3 V or 5 V supplies. It is especially suitable for clock recovery, backplane links, and high-speed point-to-point signaling.
How should the SY88927VZC be used in a PCB design?
Place the SY88927VZC near the signal source or connector, route the differential pair over a continuous reference plane, and bypass the supply connections close to the device. According to the Microchip manufacturer datasheet, VBB must be bypassed with a 0.01 µF capacitor when used as a bias. Avoid stubs, plane changes, and impedance discontinuities that could create reflections at 2.5 Gbps.
Where to buy SY88927VZC online?
Use the Request a Quote form on this page to request availability, order quantities, and current terms for the exact Microchip SY88927VZC. The requested part must retain the VZC package suffix because the manufacturer offers more than one packaging form for this family. Engineering staff can also coordinate sourcing for prototypes, production quantities, and scheduled releases.
What is the price and lead time of SY88927VZC?
Current price and lead time for the exact SY88927VZC should be requested through the Request a Quote form on this page because commercial terms can change with volume, package suffix, and market conditions. For production planning, include the required quantity, delivery schedule, and approved manufacturing locations with the request so the supply response matches the actual procurement need.
What are the key specifications of SY88927VZC?
The key SY88927VZC specifications are a 2.5 Gbps data rate, 3.0 GHz maximum frequency, 3 V to 5.5 V supply range, one differential receiver, 75 kΩ internal input pull-down resistors, and a 100K ECL-compatible output. According to the Microchip manufacturer datasheet, the device is offered in an 8-pin SOIC package and provides a defined low output for an open input.

داده‌های مرجع مهندسی برای SY88927VZC — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the SY88927VZC when the design needs a dedicated 2.5 Gbps differential receiver with a single-ended 100K ECL-compatible output, particularly in clock, backplane, telecommunications, or short-reach data interfaces. Its 3.0 GHz maximum frequency provides timing margin at the nominal signaling rate, while the 75 kΩ input pull-downs and forced-low open-input behavior help establish deterministic system states. Select a substitute only when its 8-pin SOIC pinout, supply range, differential thresholds, output levels, and high-speed timing behavior have all been confirmed. The SY100EL16V is the closest referenced family part in the manufacturer documentation, but the SY88927VZC is specifically positioned as its faster, improved-waveform alternative. For industrial, automotive, or extended-temperature equipment, verify the environmental and qualification requirements before committing the receiver to production.

مقایسه با جایگزین‌ها

پارامتر این محصول
Brand Microchip Technology
Package 8-pin SOIC
Product Type High-speed differential receiver
Number of Receivers 1 receiver
Number of Drivers 0 drivers
Nominal Data Rate 2.5 Gbps
Maximum Frequency 3.0 GHz
Supply Voltage Range 3 V to 5.5 V
Input Pull-Down Resistance 75 kΩ
Output Compatibility 100K ECL-compatible
Open-Input Output State Q output forced low

تفاوت‌های کلیدی

  • Higher nominal signaling rate than the referenced EL16V device (در مقابلSY100EL16V)
  • Defined behavior for an open differential input (در مقابلSY100EL16V)
  • Supports both common high-speed system supply levels (در مقابلSY100EL16V)

یادداشت‌های طراحی

Route the SY88927VZC differential input as a controlled-impedance pair over a continuous reference plane. Match the pair spacing to the PCB stack-up, avoid vias and geometry changes where possible, and keep the receiver close to the connector or transmitter. At a 2.5 Gbps nominal rate, discontinuities can produce reflections and timing errors that are not apparent from the receiver's stated maximum frequency alone.

Follow the Microchip manufacturer datasheet when connecting VBB. This pin is intended only as a bias because its current sourcing and sinking capability is limited. When VBB is used, bypass it to the most positive supply with a 0.01 µF capacitor and place the bypass component close to the relevant device pins. Confirm the supply rails and VBB arrangement against the electrical-characteristics section before fabrication.

Do not treat any 8-SOIC differential receiver as an automatic replacement for the SY88927VZC. Verify the numbered pin functions, differential thresholds, output levels, propagation delay, supply range, data rate, and package dimensions. The internal 75 kΩ pull-downs provide a defined state for an open input, but they do not replace a deliberate bias, termination, or system-level fault-detection strategy.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement is identified in the available product information.

تاریخ تأیید داده‌ها: 2026-11-16 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

SY88927VZC datasheet SY88927VZC datasheet pdf SY88927VZC pinout SY88927VZC specifications SY88927VZC 2.5Gbps receiver SY88927VZC 3.0GHz frequency SY88927VZC 8-SOIC package SY88927VZC drop-in replacement SY88927VZC equivalent SY88927VZC vs SY100EL16V SY88927VZC price SY88927VZC stock

قطعات و اصطلاحات مرتبط

Microchip Technology SY88927VZC SY88927V SY100EL16V high-speed differential receiver interface IC signal conditioner semiconductor differential signaling single-ended output 100K ECL 75 kΩ input pull-down resistor 2.5 Gbps 3.0 GHz 3 V to 5.5 V 8-pin SOIC SOIC family surface-mount package VBB bias 0.01 µF bypass capacitor high-speed backplane telecommunications interface clock recovery open-input clamping
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ