THS7313PW - 3-Channel 6dB SDTV Video Amp | Texas Instruments
MPN: THS7313PW ✓ NakahandaTHS7313PW Ulas
A video amplifier conditions analog composite video signals by providing gain, impedance buffering, bias control, and correction functions before the signal reaches an encoder, display interface, or video capture stage. The THS7313 belongs to the video-amplifier hierarchy within interface ICs and is intended for SDTV and related composite-video signal paths requiring controlled amplitude and multiple source selection.
The principal features are three integrated video channels, 6 dB gain, 2:1 input multiplexing, sag correction, I2C-controlled configuration, and selectable input-bias modes. The 2:1 multiplexer allows each channel to select between two video inputs, reducing the number of external routing components when the source changes infrequently. I2C control supports programmable configuration while avoiding dedicated control pins for every parameter.
The device is fabricated using Texas Instruments' complementary silicon-germanium BiCom-III process. This process supports the integration of high-speed analog video functions, low-power operation, and digital control in one monolithic device. Single-supply operation also simplifies PCB power planning in portable and space-constrained consumer equipment.
Typical uses include SDTV set-top boxes, video scalers, digital video recorders, television sets, video game consoles, and other systems that process composite video. The three-channel architecture suits designs carrying red, green, and blue component signals or three separate composite-video channels. The integrated multiplexer is especially useful when each channel must accept one of two source signals.
Designers should preserve the recommended input and output network, provide a stable low-noise supply, and verify I2C address and configuration settings before enabling signal routing. Because no complete pin-description table is reproduced here, use the manufacturer datasheet pin table and typical-application circuit when assigning tracks, terminating inputs, and placing bypass capacitors.
This page consolidates the device identity, package information, verified commercial listing, candidate drop-in relationships, application guidance, and engineering considerations into a practical reference for evaluating the THS7313PW.
Mga alternatibo na pwedeng ilagay na THS7313PW — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
THS7303PW
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →THS7368IPWR
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
THS7313PW Mga Spesipikasyon
| Device Type | 3-channel SDTV video amplifier with 2:1 multiplexer |
| Number of Channels | 3 channels |
| Supply Voltage Range | 2.7 V to 5 V |
| Gain | 6 dB |
| Input Multiplexer Ratio | 2:1 per channel |
| Control Interface | I2C |
| Sag Correction | Supported |
| Input Bias Modes | Selectable |
| Process Technology | Complementary SiGe BiCom-III |
| Power Supply Type | Single supply |
| Packhaging | 20-pin TSSOP (PW) |
| Package Width | 4.40 mm |
| Uri ng Pagpapasok | Surface mount |
Gabay sa Pin Configuration ng THS7313PW 4.40 mm
Pin configuration para sa THS7313PW (4.40 mm package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa THS7313PW.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
THS7313PW ay nararapat para sa 6 aplikasyons: SDTV Set-Top Box Video Conditioning, Composite-Video Router with Two-Source Selection, Digital Video Recorder Video Front End, Television and Display Interface Conditioning, Video Game Console Analog Video Output, Portable SDTV Video Processor Interface.
SDTV Set-Top Box Video Conditioning
The THS7313PW suits an SDTV set-top box that processes three analog video channels using a single 2.7 V to 5 V supply. Its three integrated amplifiers provide 6 dB gain, while I2C control allows a system controller to configure channel operating conditions during startup. The integrated 2:1 multiplexer can select between two sources for each channel, reducing external switching requirements when the receiver must accommodate multiple video paths.
Inirekomenda
Composite-Video Router with Two-Source Selection
The THS7313PW can condition three composite-video paths when each path must accept one of two possible inputs. Its 2:1 multiplexer performs source selection inside the amplifier package, while the 6 dB gain stage prepares the selected signal for downstream encoding or digitization. I2C control reduces dedicated routing-control wiring, although the designer must verify supported video amplitude, timing, and output-loading requirements against the target system.
Inirekomenda
Digital Video Recorder Video Front End
A digital video recorder can use the THS7313PW to condition multiple analog video signals before conversion or encoding. Three channels in one 20-pin TSSOP package conserve board area compared with separate amplifiers, while selectable bias modes help accommodate different source characteristics. The single 2.7 V to 5 V supply range supports both 3.3 V and 5 V system architectures, and I2C control enables coordinated configuration across all three channels.
Inirekomenda
Television and Display Interface Conditioning
The THS7313PW is appropriate for television or display-interface circuitry requiring controlled amplification of several video signals. Its 6 dB gain supports signal-level conditioning, sag correction addresses amplitude-related video behavior, and the 2:1 input structure offers flexible source routing. Because the device handles analog video signals, careful separation from display timing buses and switching regulators is important to prevent coupling into the amplified channels.
Inirekomenda
Video Game Console Analog Video Output
The THS7313PW can provide compact analog video conditioning in a video game console or similar consumer entertainment device. Integrating three channels into a 20-pin TSSOP package leaves more board area for processing and storage circuitry, while I2C configuration allows a host controller to manage channel settings. The 2.7 V to 5 V operating range provides flexibility across low-voltage and 5 V power architectures found in mixed-signal consumer equipment.
Inirekomenda
Portable SDTV Video Processor Interface
The THS7313PW is suitable for portable or space-constrained SDTV equipment where three conditioned video outputs are needed. Its low-power, single-supply design supports a 2.7 V to 5 V input range, and the three-channel integration reduces the footprint and external component count of a discrete buffer solution. The 2:1 multiplexer also allows each channel to accept two source options, which can simplify source-selection routing in portable playback and capture systems.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for THS7313PW — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | THS7303PW | THS7368IPWR |
|---|---|---|---|
| Manufacturer | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 20-pin TSSOP (PW) | 20-pin TSSOP (PW) | 20-pin TSSOP (PW) |
Pangunahing mga Pagkakaiba
- Integrated two-source selection in every video channel (kumpara saTHS7303PW)
- Six-decibel gain with programmable video-channel behavior (kumpara saTHS7368IPWR)
- Single-supply operation across common embedded rails (kumpara saTHS7303PW)
Talaan ng Disenyo
Route the three analog video channels with short traces, continuous ground references, and separation from switching-regulator and digital-clock paths. Place the device's recommended bypass capacitors close to their numbered supply pins. The 20-pin TSSOP footprint leaves limited room for fanout, so verify every video, I2C, supply, and ground connection against the manufacturer pin table before releasing the PCB artwork.
Preserve the input and output network shown in the manufacturer application circuit because the THS7313PW's usable video bandwidth, loading, gain, and output swing depend on the surrounding signal path. Avoid long stubs between the amplifier and downstream video device. If the source and destination impedances differ, evaluate the termination network on the schematic rather than assuming that the multiplexer's 6 dB gain is the only gain in the channel.
Do not assume that two 20-pin TSSOP video amplifiers are interchangeable because their packages match. Before substituting THS7303PW or THS7368IPWR, compare the numbered pins, I2C addresses and registers, mux behavior, supply limits, output swing, sag-correction implementation, and disable state. The THS7313PW specifically provides a 2:1 multiplexer, so omitting that function can change the complete system behavior even when the PCB fits.
Impormasyon ng Pagsunod sa Kautusan
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements were identified in the cited product pages. AEC-Q100 is not applicable because the THS7313PW is an interface IC rather than an automotive-qualified component.