Texas Instruments

THS7313PW - 3-Channel 6dB SDTV Video Amp | Texas Instruments

MPN: THS7313PW ✓ Aktif
2.7 V to 5 V Vdss 20-pin TSSOP (PW) Package
MOQ: 1 |

THS7313PW Genel Bakış

The Texas Instruments THS7313PW is a three-channel, low-power SDTV video amplifier with I2C control, selectable 6 dB gain, sag correction, 2:1 input multiplexing, and selectable input-bias modes. The device operates from a single 2.7 V to 5 V supply and is packaged in a 20-pin TSSOP (PW) package. It combines three video processing channels with digital configuration in one low-power integrated circuit.

A video amplifier conditions analog composite video signals by providing gain, impedance buffering, bias control, and correction functions before the signal reaches an encoder, display interface, or video capture stage. The THS7313 belongs to the video-amplifier hierarchy within interface ICs and is intended for SDTV and related composite-video signal paths requiring controlled amplitude and multiple source selection.

The principal features are three integrated video channels, 6 dB gain, 2:1 input multiplexing, sag correction, I2C-controlled configuration, and selectable input-bias modes. The 2:1 multiplexer allows each channel to select between two video inputs, reducing the number of external routing components when the source changes infrequently. I2C control supports programmable configuration while avoiding dedicated control pins for every parameter.

The device is fabricated using Texas Instruments' complementary silicon-germanium BiCom-III process. This process supports the integration of high-speed analog video functions, low-power operation, and digital control in one monolithic device. Single-supply operation also simplifies PCB power planning in portable and space-constrained consumer equipment.

Typical uses include SDTV set-top boxes, video scalers, digital video recorders, television sets, video game consoles, and other systems that process composite video. The three-channel architecture suits designs carrying red, green, and blue component signals or three separate composite-video channels. The integrated multiplexer is especially useful when each channel must accept one of two source signals.

Designers should preserve the recommended input and output network, provide a stable low-noise supply, and verify I2C address and configuration settings before enabling signal routing. Because no complete pin-description table is reproduced here, use the manufacturer datasheet pin table and typical-application circuit when assigning tracks, terminating inputs, and placing bypass capacitors.

This page consolidates the device identity, package information, verified commercial listing, candidate drop-in relationships, application guidance, and engineering considerations into a practical reference for evaluating the THS7313PW.

Drop-in alternatifler için THS7313PW — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

THS7303PW

✅ Yerleştirme
Texas Instruments
📦 20-pin TSSOP (PW)
3 channels · 3-channel low-power video amplifier with 2:1 input multiplexer · 2.7 V to 5 V · 190 MHz at -3 dB · 320 V/µs · 18.9 mA · 6 mA · Selectable 6 dB gain

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

THS7368IPWR

✅ Yerleştirme
📦 20-pin TSSOP (PW)
Same 20-pin TSSOP PW package; gain, input, control, and output performance differ from the THS7313PW, so the candidate is limited to the 70% compatibility threshold pending pin-table verification.

📋 Katalogda Olmayan Referans Alternatifi

THS7313PW Özellikler

Device Type 3-channel SDTV video amplifier with 2:1 multiplexer
Number of Channels 3 channels
Supply Voltage Range 2.7 V to 5 V
Gain 6 dB
Input Multiplexer Ratio 2:1 per channel
Control Interface I2C
Sag Correction Supported
Input Bias Modes Selectable
Process Technology Complementary SiGe BiCom-III
Power Supply Type Single supply
Paket 20-pin TSSOP (PW)
Package Width 4.40 mm
Montaj Türü Surface mount

THS7313PW 4.40 mm Pin Yapısı Kılavuzu

THS7313PW (4.40 mm paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

4.40 mm paket pin çizelgesi için THS7313PW

Ayrıntılı pin çıkış verisi mevcut değil: THS7313PW.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

THS7313PW için uygundur 6 uygulamas: SDTV Set-Top Box Video Conditioning, Composite-Video Router with Two-Source Selection, Digital Video Recorder Video Front End, Television and Display Interface Conditioning, Video Game Console Analog Video Output, Portable SDTV Video Processor Interface.

📺

SDTV Set-Top Box Video Conditioning

The THS7313PW suits an SDTV set-top box that processes three analog video channels using a single 2.7 V to 5 V supply. Its three integrated amplifiers provide 6 dB gain, while I2C control allows a system controller to configure channel operating conditions during startup. The integrated 2:1 multiplexer can select between two sources for each channel, reducing external switching requirements when the receiver must accommodate multiple video paths.

🔧

Composite-Video Router with Two-Source Selection

The THS7313PW can condition three composite-video paths when each path must accept one of two possible inputs. Its 2:1 multiplexer performs source selection inside the amplifier package, while the 6 dB gain stage prepares the selected signal for downstream encoding or digitization. I2C control reduces dedicated routing-control wiring, although the designer must verify supported video amplitude, timing, and output-loading requirements against the target system.

🎥

Digital Video Recorder Video Front End

A digital video recorder can use the THS7313PW to condition multiple analog video signals before conversion or encoding. Three channels in one 20-pin TSSOP package conserve board area compared with separate amplifiers, while selectable bias modes help accommodate different source characteristics. The single 2.7 V to 5 V supply range supports both 3.3 V and 5 V system architectures, and I2C control enables coordinated configuration across all three channels.

📺

Television and Display Interface Conditioning

The THS7313PW is appropriate for television or display-interface circuitry requiring controlled amplification of several video signals. Its 6 dB gain supports signal-level conditioning, sag correction addresses amplitude-related video behavior, and the 2:1 input structure offers flexible source routing. Because the device handles analog video signals, careful separation from display timing buses and switching regulators is important to prevent coupling into the amplified channels.

🎮

Video Game Console Analog Video Output

The THS7313PW can provide compact analog video conditioning in a video game console or similar consumer entertainment device. Integrating three channels into a 20-pin TSSOP package leaves more board area for processing and storage circuitry, while I2C configuration allows a host controller to manage channel settings. The 2.7 V to 5 V operating range provides flexibility across low-voltage and 5 V power architectures found in mixed-signal consumer equipment.

📱

Portable SDTV Video Processor Interface

The THS7313PW is suitable for portable or space-constrained SDTV equipment where three conditioned video outputs are needed. Its low-power, single-supply design supports a 2.7 V to 5 V input range, and the three-channel integration reduces the footprint and external component count of a discrete buffer solution. The 2:1 multiplexer also allows each channel to accept two source options, which can simplify source-selection routing in portable playback and capture systems.

Önerilen Ürünler Özeti

THS7313 Texas Instruments device family containing the THS7313PW ordering option Kullanıldığı Yer: SDTV Set-Top Box Video Conditioning, Digital Video Recorder Video Front End, Video Game Console Analog Video Output THS7313EVM Texas Instruments evaluation module for evaluating the THS7313 family Kullanıldığı Yer: SDTV Set-Top Box Video Conditioning, Composite-Video Router with Two-Source Selection, Digital Video Recorder Video Front End, Television and Display Interface Conditioning, Video Game Console Analog Video Output, Portable SDTV Video Processor Interface THS7313PW Texas Instruments Kullanıldığı Yer: Composite-Video Router with Two-Source Selection, Television and Display Interface Conditioning, Portable SDTV Video Processor Interface
What is the THS7313PW?
The THS7313PW is a three-channel, low-power SDTV video amplifier with I2C control, 6 dB gain, sag correction, 2:1 input multiplexing, and selectable input-bias modes. According to the Texas Instruments product page, the device integrates three video-processing channels in a 20-pin TSSOP package. It is intended for compact composite-video and SDTV signal-conditioning systems that benefit from programmable gain-related control and source selection.
What is the supply voltage range of THS7313PW?
The THS7313PW operates from a single 2.7 V to 5 V supply. The Texas Instruments datasheet describes the device as a low-power, single-supply video buffer, allowing it to work with 3.3 V or 5 V system rails. Designers should still confirm the power-supply tolerance, bypass-capacitor requirements, and maximum signal amplitudes before using the amplifier near the limits of the specified supply range.
How many channels and inputs does THS7313PW provide?
The THS7313PW provides three video-amplifier channels, and each channel includes a 2:1 input multiplexer. This permits each channel to select between two candidate video sources through the device configuration interface. According to the Texas Instruments product description, the device is specifically identified as a three-channel amplifier with I2C control and a 2:1 multiplexer in the 20-pin TSSOP PW package.
What gain does THS7313PW provide?
The THS7313PW provides 6 dB gain in its integrated video-amplifier channels. According to the Texas Instruments product page, this gain is combined with sag correction and selectable input-bias modes. The 6 dB setting increases the nominal signal amplitude by a factor of two before it passes to the next video-processing or output stage, subject to output swing, loading, and supply-headroom limits.
What can I2C control on THS7313PW?
The THS7313PW uses I2C control for programmable configuration of its integrated video channels. The device combines three amplifiers, 6 dB gain, sag correction, 2:1 input selection, and selectable bias behavior in one package. According to the Texas Instruments product page, I2C is a defining feature of the device, allowing control traffic to coexist with analog video routing on the same PCB.
Where can I download the THS7313PW datasheet PDF?
The official THS7313 datasheet PDF is available from the Texas Instruments literature link at https://www.ti.com/lit/gpn/THS7313, and the product page is https://www.ti.com/product/THS7313. The manufacturer literature contains the authoritative electrical characteristics, register information, pin descriptions, and typical application circuits. Use the PW ordering information to confirm that the document applies to the 20-pin TSSOP package.
Where can I find the THS7313PW pinout?
The THS7313PW pinout is documented in the manufacturer datasheet under the pin-configuration and connection-diagram sections. The component is a 20-pin TSSOP in the PW package. Use that table rather than inferring pin functions from a generic 20-pin footprint, because the analog inputs, outputs, I2C interface, supply pins, and configuration functions must each be assigned to their exact numbered locations.
Is THS7313PW suitable for SDTV and composite-video systems?
The THS7313PW is specifically designed for low-power SDTV video signal conditioning. Its three channels, 6 dB gain, 2:1 multiplexing, sag correction, and selectable input-bias modes support systems handling several related analog video signals. According to the Texas Instruments product description, it is suitable for SDTV equipment where controlled signal conditioning and programmable source selection are required.
What can replace THS7313PW?
THS7303PW is the closest identified candidate for direct evaluation because it uses the same 20-pin TSSOP PW package and belongs to the same three-channel, low-power SDTV video-amplifier family. The THS7313 adds a 2:1 input multiplexer to the feature set, while the THS7303PW lacks that multiplexer function. Before approving a substitution, verify the complete pin table, I2C register map, electrical limits, and application behavior.
Can THS7368IPWR replace THS7313PW?
THS7368IPWR is a candidate for engineering review, but it should not be treated as an automatic drop-in replacement for THS7313PW. Although both are associated with Texas Instruments SDTV video-amplifier families and TSSOP packaging, their gain, input, control, and output specifications must be compared. Confirm exact pin-to-pin compatibility, supply range, register behavior, and signal-path requirements before using it as a substitute.
THS7313PW vs THS7303PW: which is better for a multiplexed video input?
Choose THS7313PW when each video channel must select between two sources because it includes a 2:1 input multiplexer. The THS7303PW provides the same three-channel, low-power SDTV video-amplifier format in the PW package but does not provide the THS7313's 2:1 multiplexing feature. Confirm all remaining electrical and I2C requirements before treating the older device as a drop-in alternative.
When should I choose THS7313PW over THS7303PW?
Choose THS7313PW when your design needs two selectable video inputs for each of three channels, along with 6 dB gain and configurable bias behavior. THS7303PW is more appropriate when the architecture does not require the THS7313's 2:1 multiplexer and its register behavior matches the intended design. Both use a 20-pin TSSOP format, but matching the package does not replace detailed pin and register verification.
How do I minimize noise in a THS7313PW video design?
Keep the I2C routing away from sensitive video-input and output traces, place supply bypass capacitors close to the device, and use short, controlled-impedance paths for analog video signals. The THS7313PW's low-power architecture helps reduce system demand, but layout quality still determines board-level noise performance. Use the manufacturer's recommended capacitor values and application circuit as the baseline for schematic capture and PCB layout.
Is THS7313PW in stock, and what is its lead time?
Current stock and a guaranteed lead time should be confirmed through the Request a Quote form on this page. A distributor listing shows 7,320 pieces and an estimated immediate shipment window, but that information can change without notice. Use the quote form to request the current quantity, lead time, and the exact THS7313PW ordering configuration required for production.
Where can I buy THS7313PW online?
Use the Request a Quote form on this page to request THS7313PW availability, production quantities, and delivery information. The part is a Texas Instruments 20-pin TSSOP device, and the ordering designation PW identifies that package configuration. The request should state whether the unit is a prototype quantity, production reel, or another approved shipping format so the quotation reflects the correct manufacturing needs.
What is the price of THS7313PW?
The current THS7313PW price is presented through the Request a Quote form on this page rather than as a fixed quote. The latest listing records a unit price, but its commercial terms and quantity availability may differ from a production order. Submit the required quantity, target date, and packaging preference through the quote form to obtain current pricing and lead time.

Mühendislik referans verileri: THS7313PW — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose THS7313PW when the design needs three SDTV video channels, 6 dB gain, selectable input bias, sag correction, I2C configuration, and a 2:1 multiplexer on each channel. Its 2.7 V to 5 V single-supply operation is suitable for both 3.3 V and 5 V embedded video systems. Consider THS7303PW only when the application does not need 2:1 input selection and its register map, electrical limits, and pin behavior match the target board. Evaluate THS7368IPWR when it provides a required video function unavailable in the THS7313PW, but complete a full pin and register comparison before calling it a drop-in replacement. For all three options, base production approval on the manufacturer pin table, absolute maximum ratings, electrical characteristics, and typical application circuit rather than package similarity alone.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün THS7303PW THS7368IPWR
Manufacturer Texas Instruments Texas Instruments Texas Instruments
Package 20-pin TSSOP (PW) 20-pin TSSOP (PW) 20-pin TSSOP (PW)

Ana Farklılayıcılar

  • Integrated two-source selection in every video channel (karşılaştırma:THS7303PW)
  • Six-decibel gain with programmable video-channel behavior (karşılaştırma:THS7368IPWR)
  • Single-supply operation across common embedded rails (karşılaştırma:THS7303PW)

Tasarım Notları

Route the three analog video channels with short traces, continuous ground references, and separation from switching-regulator and digital-clock paths. Place the device's recommended bypass capacitors close to their numbered supply pins. The 20-pin TSSOP footprint leaves limited room for fanout, so verify every video, I2C, supply, and ground connection against the manufacturer pin table before releasing the PCB artwork.

Preserve the input and output network shown in the manufacturer application circuit because the THS7313PW's usable video bandwidth, loading, gain, and output swing depend on the surrounding signal path. Avoid long stubs between the amplifier and downstream video device. If the source and destination impedances differ, evaluate the termination network on the schematic rather than assuming that the multiplexer's 6 dB gain is the only gain in the channel.

Do not assume that two 20-pin TSSOP video amplifiers are interchangeable because their packages match. Before substituting THS7303PW or THS7368IPWR, compare the numbered pins, I2C addresses and registers, mux behavior, supply limits, output swing, sag-correction implementation, and disable state. The THS7313PW specifically provides a 2:1 multiplexer, so omitting that function can change the complete system behavior even when the PCB fits.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements were identified in the cited product pages. AEC-Q100 is not applicable because the THS7313PW is an interface IC rather than an automotive-qualified component.

Veri doğrulanma tarihi: 2026-11-15 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

THS7313PW datasheet THS7313PW datasheet pdf THS7313PW pinout THS7313PW specifications THS7313PW equivalent THS7313PW replacement THS7313PW price THS7313PW stock Texas Instruments THS7313PW THS7313PW 6dB video amplifier THS7313PW TSSOP-20 footprint THS7313PW vs THS7303PW

İlgili Bileşenler ve Terimler

Texas Instruments THS7313PW THS7313 THS7303PW THS7368IPWR THS7313EVM 3-channel video amplifier SDTV video amplifier video buffer analog video interface interface IC video IC semiconductor 2:1 multiplexer I2C control sag correction selectable input-bias mode 6 dB gain 2.7 V to 5 V supply complementary SiGe BiCom-III 20-pin TSSOP TSSOP package family surface mount SMD composite video set-top box digital video recorder television video game console
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle