THS7313PW - 3-Channel 6dB SDTV Video Amp | Texas Instruments
料号: THS7313PW ✓ 量产中THS7313PW 概述
A video amplifier conditions analog composite video signals by providing gain, impedance buffering, bias control, and correction functions before the signal reaches an encoder, display interface, or video capture stage. The THS7313 belongs to the video-amplifier hierarchy within interface ICs and is intended for SDTV and related composite-video signal paths requiring controlled amplitude and multiple source selection.
The principal features are three integrated video channels, 6 dB gain, 2:1 input multiplexing, sag correction, I2C-controlled configuration, and selectable input-bias modes. The 2:1 multiplexer allows each channel to select between two video inputs, reducing the number of external routing components when the source changes infrequently. I2C control supports programmable configuration while avoiding dedicated control pins for every parameter.
The device is fabricated using Texas Instruments' complementary silicon-germanium BiCom-III process. This process supports the integration of high-speed analog video functions, low-power operation, and digital control in one monolithic device. Single-supply operation also simplifies PCB power planning in portable and space-constrained consumer equipment.
Typical uses include SDTV set-top boxes, video scalers, digital video recorders, television sets, video game consoles, and other systems that process composite video. The three-channel architecture suits designs carrying red, green, and blue component signals or three separate composite-video channels. The integrated multiplexer is especially useful when each channel must accept one of two source signals.
Designers should preserve the recommended input and output network, provide a stable low-noise supply, and verify I2C address and configuration settings before enabling signal routing. Because no complete pin-description table is reproduced here, use the manufacturer datasheet pin table and typical-application circuit when assigning tracks, terminating inputs, and placing bypass capacitors.
This page consolidates the device identity, package information, verified commercial listing, candidate drop-in relationships, application guidance, and engineering considerations into a practical reference for evaluating the THS7313PW.
直接替换替代料: THS7313PW ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
THS7303PW
✅ 直接替换联系询价
查看数据手册 →THS7368IPWR
✅ 直接替换📋 参考替代料(不在目录中)
THS7313PW 规格参数
| Device Type | 3-channel SDTV video amplifier with 2:1 multiplexer |
| Number of Channels | 3 channels |
| Supply Voltage Range | 2.7 V to 5 V |
| Gain | 6 dB |
| Input Multiplexer Ratio | 2:1 per channel |
| Control Interface | I2C |
| Sag Correction | Supported |
| Input Bias Modes | Selectable |
| Process Technology | Complementary SiGe BiCom-III |
| Power Supply Type | Single supply |
| 封装 | 20-pin TSSOP (PW) |
| Package Width | 4.40 mm |
| 安装类型 | Surface mount |
THS7313PW 4.40 mm 引脚配置指南
THS7313PW(4.40 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: THS7313PW.
请参阅 数据手册 以查看完整引脚配置。
典型应用
THS7313PW 适用于 6 应用s: SDTV Set-Top Box Video Conditioning, Composite-Video Router with Two-Source Selection, Digital Video Recorder Video Front End, Television and Display Interface Conditioning, Video Game Console Analog Video Output, Portable SDTV Video Processor Interface.
SDTV Set-Top Box Video Conditioning
The THS7313PW suits an SDTV set-top box that processes three analog video channels using a single 2.7 V to 5 V supply. Its three integrated amplifiers provide 6 dB gain, while I2C control allows a system controller to configure channel operating conditions during startup. The integrated 2:1 multiplexer can select between two sources for each channel, reducing external switching requirements when the receiver must accommodate multiple video paths.
推荐
Composite-Video Router with Two-Source Selection
The THS7313PW can condition three composite-video paths when each path must accept one of two possible inputs. Its 2:1 multiplexer performs source selection inside the amplifier package, while the 6 dB gain stage prepares the selected signal for downstream encoding or digitization. I2C control reduces dedicated routing-control wiring, although the designer must verify supported video amplitude, timing, and output-loading requirements against the target system.
推荐
Digital Video Recorder Video Front End
A digital video recorder can use the THS7313PW to condition multiple analog video signals before conversion or encoding. Three channels in one 20-pin TSSOP package conserve board area compared with separate amplifiers, while selectable bias modes help accommodate different source characteristics. The single 2.7 V to 5 V supply range supports both 3.3 V and 5 V system architectures, and I2C control enables coordinated configuration across all three channels.
推荐
Television and Display Interface Conditioning
The THS7313PW is appropriate for television or display-interface circuitry requiring controlled amplification of several video signals. Its 6 dB gain supports signal-level conditioning, sag correction addresses amplitude-related video behavior, and the 2:1 input structure offers flexible source routing. Because the device handles analog video signals, careful separation from display timing buses and switching regulators is important to prevent coupling into the amplified channels.
推荐
Video Game Console Analog Video Output
The THS7313PW can provide compact analog video conditioning in a video game console or similar consumer entertainment device. Integrating three channels into a 20-pin TSSOP package leaves more board area for processing and storage circuitry, while I2C configuration allows a host controller to manage channel settings. The 2.7 V to 5 V operating range provides flexibility across low-voltage and 5 V power architectures found in mixed-signal consumer equipment.
推荐
Portable SDTV Video Processor Interface
The THS7313PW is suitable for portable or space-constrained SDTV equipment where three conditioned video outputs are needed. Its low-power, single-supply design supports a 2.7 V to 5 V input range, and the three-channel integration reduces the footprint and external component count of a discrete buffer solution. The 2:1 multiplexer also allows each channel to accept two source options, which can simplify source-selection routing in portable playback and capture systems.
推荐
推荐产品汇总
工程参考数据: THS7313PW ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | THS7303PW | THS7368IPWR |
|---|---|---|---|
| Manufacturer | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 20-pin TSSOP (PW) | 20-pin TSSOP (PW) | 20-pin TSSOP (PW) |
关键差异点
- Integrated two-source selection in every video channel (对比 THS7303PW)
- Six-decibel gain with programmable video-channel behavior (对比 THS7368IPWR)
- Single-supply operation across common embedded rails (对比 THS7303PW)
设计说明
Route the three analog video channels with short traces, continuous ground references, and separation from switching-regulator and digital-clock paths. Place the device's recommended bypass capacitors close to their numbered supply pins. The 20-pin TSSOP footprint leaves limited room for fanout, so verify every video, I2C, supply, and ground connection against the manufacturer pin table before releasing the PCB artwork.
Preserve the input and output network shown in the manufacturer application circuit because the THS7313PW's usable video bandwidth, loading, gain, and output swing depend on the surrounding signal path. Avoid long stubs between the amplifier and downstream video device. If the source and destination impedances differ, evaluate the termination network on the schematic rather than assuming that the multiplexer's 6 dB gain is the only gain in the channel.
Do not assume that two 20-pin TSSOP video amplifiers are interchangeable because their packages match. Before substituting THS7303PW or THS7368IPWR, compare the numbered pins, I2C addresses and registers, mux behavior, supply limits, output swing, sag-correction implementation, and disable state. The THS7313PW specifically provides a 2:1 multiplexer, so omitting that function can change the complete system behavior even when the PCB fits.
合规信息
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements were identified in the cited product pages. AEC-Q100 is not applicable because the THS7313PW is an interface IC rather than an automotive-qualified component.