W78E052B40PL - 8-Bit 40MHz 8051 Microcontroller | Nuvoton
MPN: W78E052B40PL ✓ NakahandaW78E052B40PL Ulas
The W78E052B40PL is designed for applications requiring moderate processing performance and embedded nonvolatile storage. Its 8 KB flash capacity is suitable for compact firmware, boot logic, state-machine control, and peripheral coordination. The 44-LCC J-lead package provides a leaded component format that can simplify prototype assembly, visual inspection, and through-hole PCB assembly compared with fine-pitch surface-mount packages.
The 8051 instruction set and W78 microcontroller family make this device recognizable to engineers developing legacy-compatible embedded platforms. The core runs at 40 MHz, while the available flash organization supports firmware storage without an external memory device. The device can be used as the central controller in small industrial systems, or as a dedicated subsystem controller where a deterministic, low-complexity architecture is preferable to a higher-cost application processor.
Common application areas include motor and relay sequencing, temperature-control panels, security and access-control terminals, keyboard interfaces, LED indicators, sensor aggregation, and communication equipment. The W78E052B40PL is also useful in educational and industrial-control environments where an 8-bit MCU, internal flash, and manageable package size are priorities.
When designing a PCB, treat the 44-LCC J-lead footprint as the controlling mechanical interface and verify the manufacturer's pin-assignment table before routing power, oscillator, reset, and I/O nets. Confirm oscillator selection, reset requirements, programming method, and decoupling requirements against the manufacturer datasheet. The component's 8051 heritage makes software-tool compatibility a key consideration when replacing an older controller.
This product page combines verified distributor specifications, package information, sourcing guidance, replacement analysis, and practical design notes. It emphasizes the W78E052B40PL's 40 MHz speed, 8 KB flash organization, 8-bit architecture, and 44-LCC package so design engineers can evaluate it quickly against other embedded-control choices.
Mga alternatibo na pwedeng ilagay na W78E052B40PL — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok W78E052B40PL (parehas na form factor at footprint) — pagkakaiba sa Microcontroller Family, Mounting Type, Package.
W78E052DPG
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →W78E052B40PL Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 8-bit 8051 W78 Microcontroller |
| CPU Architecture | 8051, 8-bit |
| Maksimum na Taktiko ng Oras | 40 MHz |
| Flash Memory | 8 KB (8K x 8) |
| Program Memory Type | Flash |
| Packhaging | 44-LCC (J-Lead) |
| Uri ng Pagpapasok | Through-hole leaded package |
| Series | W78 |
| Microcontroller Family | W78 8051 Microcontroller |
| AEC-Q100 Qualification | not_applicable |
Gabay sa Pin Configuration ng W78E052B40PL 44-lcc (j-lead)
Pin configuration para sa W78E052B40PL (44-lcc (j-lead) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa W78E052B40PL.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
W78E052B40PL ay nararapat para sa 6 aplikasyons: Industrial Automation Controllers, Appliance Control Panels, Access Control and Security Terminals, LED Lighting and Display Control, Sensor Aggregation and Monitoring, Legacy 8051 Controller Migration.
Industrial Automation Controllers
The W78E052B40PL fits compact industrial automation controllers because its 8-bit 8051-compatible core runs at up to 40 MHz and provides 8 KB of internal flash for control firmware. It can coordinate relays, discrete sensors, status indicators, and actuator sequencing in a small embedded controller. The 44-LCC J-lead package also supports prototype and low-volume through-hole assembly. Before finalizing the design, verify timer accuracy, I/O count, communication peripherals, supply limits, and watchdog support in the manufacturer datasheet.
Inirekomenda
Appliance Control Panels
The W78E052B40PL is appropriate for appliance control panels requiring a responsive 8051-compatible controller, internal program memory, and a manageable leaded package. Its 40 MHz operating rate provides useful headroom for user-interface scanning, operating-state logic, timing, and discrete actuator control. The 8 KB flash stores compact application firmware without an external program-memory device. Confirm the required keypad, display, heater, motor, and sensor interfaces against the device pin map before schematic capture.
Inirekomenda
Access Control and Security Terminals
The W78E052B40PL can serve as the supervisory controller in access-control readers, credential terminals, and simple security panels where deterministic embedded logic is required. Its 8-bit 8051-compatible architecture supports compact firmware for keypad handling, indicator control, credential-interface coordination, and event sequencing. Internal 8 KB flash avoids an external program-memory component for small designs. Security implementations must still include appropriate credential processing, tamper handling, communications protection, and verified I/O assignment.
Inirekomenda
LED Lighting and Display Control
The W78E052B40PL is suited to LED lighting controllers, status indicators, and small display-control boards because its 40 MHz 8051-compatible core can handle timing and mode logic while its 8 KB flash retains embedded control code. A leaded 44-LCC package makes the controller practical for through-hole industrial boards and prototypes. The design must account for LED current limits, driver-interface levels, refresh timing, and the available number and electrical ratings of the W78 GPIO pins.
Inirekomenda
Sensor Aggregation and Monitoring
The W78E052B40PL can act as a compact acquisition controller for industrial monitoring systems using discrete sensors, switches, and low-speed analog-conditioning stages. Its 8-bit 8051-compatible core and 40 MHz clock support sampling orchestration, threshold logic, filtering, local status reporting, and event handling. The internal 8 KB flash holds compact firmware while the 44-LCC J-lead package simplifies through-hole assembly. ADC requirements, input counts, conversion timing, and sensor-interface levels must be verified before selecting it.
Inirekomenda
Legacy 8051 Controller Migration
The W78E052B40PL is useful when upgrading an established 8051-based embedded product while retaining the familiar 8-bit instruction set and leaded-package assembly method. The 40 MHz clock offers more execution margin than older 8051 implementations, and 8 KB of internal flash can hold a focused control application. Migration should begin with an instruction-set, SFR, interrupt, timer, serial-interface, oscillator, and pin-assignment comparison. The package footprint and software startup assumptions must remain compatible with the existing board.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for W78E052B40PL — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | W78E052DPG |
|---|---|---|
| Package | 44-LCC (J-Lead) | 44-LCC (J-Lead), subject to footprint confirmation |
| Brand | Nuvoton Technology Corporation | Nuvoton Technology Corporation |
| Series | W78 | W78 |
| Mounting Type | Through-hole leaded package | Through-hole leaded package, subject to package-drawing confirmation |
Pangunahing mga Pagkakaiba
- Higher clock rate within an 8051-compatible architecture (kumpara saW78E052DPG)
- Integrated flash program memory (kumpara saW78E052DPG)
- Lead package eases prototype inspection and rework (kumpara saW78E052DPG)
Talaan ng Disenyo
Create the PCB footprint from the Nuvoton 44-LCC J-lead drawing rather than a generic PLCC footprint. Confirm pin-1 orientation, lead pitch, lead span, solder-mask clearance, and the exposed or keep-out areas beneath the body. Place the oscillator and decoupling network close to their associated pins and provide unobstructed assembly clearance for the through-hole leads. Review the package drawing before releasing the Gerber files.
Do not treat the W78 family designation as proof that every 8051 peripheral, special-function register, interrupt vector, and startup behavior is identical to older 8051 devices. Compare the W78E052B40PL SFR map, timer modes, serial interfaces, reset behavior, and oscillator requirements with the original controller. A source-compatible instruction set does not guarantee that an existing 8051 firmware can run without device-specific initialization changes.
Follow the manufacturer's recommended operating voltage, decoupling capacitance, and power-sequencing requirements. Place each required bypass capacitor immediately across the relevant supply pins, with a short return path to the ground plane. Validate brownout and power-up behavior in the final firmware, especially when the board controls relays, heaters, motors, or other loads that could create supply transients.
Keep high-current load drivers and switching nodes away from the MCU, oscillator, and sensitive control traces. Use a deliberate grounding strategy that separates noisy actuator returns from the digital reference network when the board allows it. Check reset behavior during power-up, brownout, and watchdog recovery because unreliable reset voltage or timing can cause intermittent field failures.
Impormasyon ng Pagsunod sa Kautusan
A cross-reference page references RoHS and REACH status, but the exact compliant or non-compliant classification for W78E052B40PL was not established from the verified snippets. AEC-Q100 is not applicable to this general-purpose 8-bit microcontroller.