W78E052B40PL - 8-Bit 40MHz 8051 Microcontroller | Nuvoton
N.º de pieza: W78E052B40PL ✓ ActivoW78E052B40PL Descripción general
The W78E052B40PL is designed for applications requiring moderate processing performance and embedded nonvolatile storage. Its 8 KB flash capacity is suitable for compact firmware, boot logic, state-machine control, and peripheral coordination. The 44-LCC J-lead package provides a leaded component format that can simplify prototype assembly, visual inspection, and through-hole PCB assembly compared with fine-pitch surface-mount packages.
The 8051 instruction set and W78 microcontroller family make this device recognizable to engineers developing legacy-compatible embedded platforms. The core runs at 40 MHz, while the available flash organization supports firmware storage without an external memory device. The device can be used as the central controller in small industrial systems, or as a dedicated subsystem controller where a deterministic, low-complexity architecture is preferable to a higher-cost application processor.
Common application areas include motor and relay sequencing, temperature-control panels, security and access-control terminals, keyboard interfaces, LED indicators, sensor aggregation, and communication equipment. The W78E052B40PL is also useful in educational and industrial-control environments where an 8-bit MCU, internal flash, and manageable package size are priorities.
When designing a PCB, treat the 44-LCC J-lead footprint as the controlling mechanical interface and verify the manufacturer's pin-assignment table before routing power, oscillator, reset, and I/O nets. Confirm oscillator selection, reset requirements, programming method, and decoupling requirements against the manufacturer datasheet. The component's 8051 heritage makes software-tool compatibility a key consideration when replacing an older controller.
This product page combines verified distributor specifications, package information, sourcing guidance, replacement analysis, and practical design notes. It emphasizes the W78E052B40PL's 40 MHz speed, 8 KB flash organization, 8-bit architecture, and 44-LCC package so design engineers can evaluate it quickly against other embedded-control choices.
Alternativas directas para W78E052B40PL — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con W78E052B40PL (mismo factor de forma y huella) — difiere en Microcontroller Family, Mounting Type, Package.
W78E052DPG
✅ Sustitución directaConsulte el precio
Ver hoja de datos →W78E052B40PL Valores máximos y características eléctricas
| Product Type | 8-bit 8051 W78 Microcontroller |
| CPU Architecture | 8051, 8-bit |
| Frecuencia de reloj máxima | 40 MHz |
| Flash Memory | 8 KB (8K x 8) |
| Program Memory Type | Flash |
| Encapsulado | 44-LCC (J-Lead) |
| Tipo de montaje | Through-hole leaded package |
| Series | W78 |
| Microcontroller Family | W78 8051 Microcontroller |
| AEC-Q100 Qualification | not_applicable |
Guía de configuración de pines de W78E052B40PL 44-lcc (j-lead)
Configuración de pines para W78E052B40PL (encapsulado 44-lcc (j-lead)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para W78E052B40PL.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
W78E052B40PL es adecuado para 6 aplicacións: Industrial Automation Controllers, Appliance Control Panels, Access Control and Security Terminals, LED Lighting and Display Control, Sensor Aggregation and Monitoring, Legacy 8051 Controller Migration.
Industrial Automation Controllers
The W78E052B40PL fits compact industrial automation controllers because its 8-bit 8051-compatible core runs at up to 40 MHz and provides 8 KB of internal flash for control firmware. It can coordinate relays, discrete sensors, status indicators, and actuator sequencing in a small embedded controller. The 44-LCC J-lead package also supports prototype and low-volume through-hole assembly. Before finalizing the design, verify timer accuracy, I/O count, communication peripherals, supply limits, and watchdog support in the manufacturer datasheet.
Recomendado
Appliance Control Panels
The W78E052B40PL is appropriate for appliance control panels requiring a responsive 8051-compatible controller, internal program memory, and a manageable leaded package. Its 40 MHz operating rate provides useful headroom for user-interface scanning, operating-state logic, timing, and discrete actuator control. The 8 KB flash stores compact application firmware without an external program-memory device. Confirm the required keypad, display, heater, motor, and sensor interfaces against the device pin map before schematic capture.
Recomendado
Access Control and Security Terminals
The W78E052B40PL can serve as the supervisory controller in access-control readers, credential terminals, and simple security panels where deterministic embedded logic is required. Its 8-bit 8051-compatible architecture supports compact firmware for keypad handling, indicator control, credential-interface coordination, and event sequencing. Internal 8 KB flash avoids an external program-memory component for small designs. Security implementations must still include appropriate credential processing, tamper handling, communications protection, and verified I/O assignment.
Recomendado
LED Lighting and Display Control
The W78E052B40PL is suited to LED lighting controllers, status indicators, and small display-control boards because its 40 MHz 8051-compatible core can handle timing and mode logic while its 8 KB flash retains embedded control code. A leaded 44-LCC package makes the controller practical for through-hole industrial boards and prototypes. The design must account for LED current limits, driver-interface levels, refresh timing, and the available number and electrical ratings of the W78 GPIO pins.
Recomendado
Sensor Aggregation and Monitoring
The W78E052B40PL can act as a compact acquisition controller for industrial monitoring systems using discrete sensors, switches, and low-speed analog-conditioning stages. Its 8-bit 8051-compatible core and 40 MHz clock support sampling orchestration, threshold logic, filtering, local status reporting, and event handling. The internal 8 KB flash holds compact firmware while the 44-LCC J-lead package simplifies through-hole assembly. ADC requirements, input counts, conversion timing, and sensor-interface levels must be verified before selecting it.
Recomendado
Legacy 8051 Controller Migration
The W78E052B40PL is useful when upgrading an established 8051-based embedded product while retaining the familiar 8-bit instruction set and leaded-package assembly method. The 40 MHz clock offers more execution margin than older 8051 implementations, and 8 KB of internal flash can hold a focused control application. Migration should begin with an instruction-set, SFR, interrupt, timer, serial-interface, oscillator, and pin-assignment comparison. The package footprint and software startup assumptions must remain compatible with the existing board.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para W78E052B40PL — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | W78E052DPG |
|---|---|---|
| Package | 44-LCC (J-Lead) | 44-LCC (J-Lead), subject to footprint confirmation |
| Brand | Nuvoton Technology Corporation | Nuvoton Technology Corporation |
| Series | W78 | W78 |
| Mounting Type | Through-hole leaded package | Through-hole leaded package, subject to package-drawing confirmation |
Diferenciadores clave
- Higher clock rate within an 8051-compatible architecture (frente a W78E052DPG)
- Integrated flash program memory (frente a W78E052DPG)
- Lead package eases prototype inspection and rework (frente a W78E052DPG)
Notas de diseño
Create the PCB footprint from the Nuvoton 44-LCC J-lead drawing rather than a generic PLCC footprint. Confirm pin-1 orientation, lead pitch, lead span, solder-mask clearance, and the exposed or keep-out areas beneath the body. Place the oscillator and decoupling network close to their associated pins and provide unobstructed assembly clearance for the through-hole leads. Review the package drawing before releasing the Gerber files.
Do not treat the W78 family designation as proof that every 8051 peripheral, special-function register, interrupt vector, and startup behavior is identical to older 8051 devices. Compare the W78E052B40PL SFR map, timer modes, serial interfaces, reset behavior, and oscillator requirements with the original controller. A source-compatible instruction set does not guarantee that an existing 8051 firmware can run without device-specific initialization changes.
Follow the manufacturer's recommended operating voltage, decoupling capacitance, and power-sequencing requirements. Place each required bypass capacitor immediately across the relevant supply pins, with a short return path to the ground plane. Validate brownout and power-up behavior in the final firmware, especially when the board controls relays, heaters, motors, or other loads that could create supply transients.
Keep high-current load drivers and switching nodes away from the MCU, oscillator, and sensitive control traces. Use a deliberate grounding strategy that separates noisy actuator returns from the digital reference network when the board allows it. Check reset behavior during power-up, brownout, and watchdog recovery because unreliable reset voltage or timing can cause intermittent field failures.
Información de cumplimiento
A cross-reference page references RoHS and REACH status, but the exact compliant or non-compliant classification for W78E052B40PL was not established from the verified snippets. AEC-Q100 is not applicable to this general-purpose 8-bit microcontroller.