Nuvoton Technology Corporation

W78E052B40PL - 8-Bit 40MHz 8051 Microcontroller | Nuvoton

MPN: W78E052B40PL ✓ Active
44-LCC (J-Lead) Package 40 MHz Speed 8 KB (8K x 8) Memory
MOQ: 1 |

W78E052B40PL Overview

Nuvoton W78E052B40PL is an 8-bit W78 8051-compatible microcontroller with a 40 MHz clock, 8 KB flash memory, and a 44-LCC J-lead package. The W78 series combines a traditional 8-bit MCU architecture with integrated flash program memory, making it suitable for embedded control, industrial automation, appliance control, and compact communications designs. The 40 MHz operating speed supports faster instruction execution than conventional low-speed 8051 devices while retaining compatibility with established 8051 software tools and peripherals.

The W78E052B40PL is designed for applications requiring moderate processing performance and embedded nonvolatile storage. Its 8 KB flash capacity is suitable for compact firmware, boot logic, state-machine control, and peripheral coordination. The 44-LCC J-lead package provides a leaded component format that can simplify prototype assembly, visual inspection, and through-hole PCB assembly compared with fine-pitch surface-mount packages.

The 8051 instruction set and W78 microcontroller family make this device recognizable to engineers developing legacy-compatible embedded platforms. The core runs at 40 MHz, while the available flash organization supports firmware storage without an external memory device. The device can be used as the central controller in small industrial systems, or as a dedicated subsystem controller where a deterministic, low-complexity architecture is preferable to a higher-cost application processor.

Common application areas include motor and relay sequencing, temperature-control panels, security and access-control terminals, keyboard interfaces, LED indicators, sensor aggregation, and communication equipment. The W78E052B40PL is also useful in educational and industrial-control environments where an 8-bit MCU, internal flash, and manageable package size are priorities.

When designing a PCB, treat the 44-LCC J-lead footprint as the controlling mechanical interface and verify the manufacturer's pin-assignment table before routing power, oscillator, reset, and I/O nets. Confirm oscillator selection, reset requirements, programming method, and decoupling requirements against the manufacturer datasheet. The component's 8051 heritage makes software-tool compatibility a key consideration when replacing an older controller.

This product page combines verified distributor specifications, package information, sourcing guidance, replacement analysis, and practical design notes. It emphasizes the W78E052B40PL's 40 MHz speed, 8 KB flash organization, 8-bit architecture, and 44-LCC package so design engineers can evaluate it quickly against other embedded-control choices.

Drop-in alternatives for W78E052B40PL — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with W78E052B40PL (same form factor and footprint) — differing in Microcontroller Family, Mounting Type, Package.

Nuvoton Technology Corporation
Microcontroller Family: W78 8051-compatible series
Mounting Type: Surface mount
Package: 44-pin PLCC
Compare with W78E052B40PL →

W78E052DPG

✅ Drop-In
Nuvoton Technology Corporation
📦 44-LCC (J-Lead)
W78 8051-compatible series · 8052-compatible 8-bit CISC · 40 MHz · 8 KB flash (8K x 8) · 2.4 V to 5.5 V · 2.5 V, 3.3 V, and 5 V · 44-pin PLCC · Surface mount

Contact for price

View Datasheet →

W78E052B40PL Maximum Ratings & Electrical Characteristics

Product Type 8-bit 8051 W78 Microcontroller
CPU Architecture 8051, 8-bit
Maximum Clock Frequency 40 MHz
Flash Memory 8 KB (8K x 8)
Program Memory Type Flash
Package 44-LCC (J-Lead)
Mounting Type Through-hole leaded package
Series W78
Microcontroller Family W78 8051 Microcontroller
AEC-Q100 Qualification not_applicable

W78E052B40PL 44-lcc (j-lead) Pin Configuration Guide

Pin configuration for W78E052B40PL (44-lcc (j-lead) package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

44-lcc (j-lead) package pinout diagram for W78E052B40PL

No detailed pinout data available for W78E052B40PL.

Refer to the datasheet for full pin configuration.

Typical Applications

W78E052B40PL is suitable for 6 applications: Industrial Automation Controllers, Appliance Control Panels, Access Control and Security Terminals, LED Lighting and Display Control, Sensor Aggregation and Monitoring, Legacy 8051 Controller Migration.

🏭

Industrial Automation Controllers

The W78E052B40PL fits compact industrial automation controllers because its 8-bit 8051-compatible core runs at up to 40 MHz and provides 8 KB of internal flash for control firmware. It can coordinate relays, discrete sensors, status indicators, and actuator sequencing in a small embedded controller. The 44-LCC J-lead package also supports prototype and low-volume through-hole assembly. Before finalizing the design, verify timer accuracy, I/O count, communication peripherals, supply limits, and watchdog support in the manufacturer datasheet.

⚡

Appliance Control Panels

The W78E052B40PL is appropriate for appliance control panels requiring a responsive 8051-compatible controller, internal program memory, and a manageable leaded package. Its 40 MHz operating rate provides useful headroom for user-interface scanning, operating-state logic, timing, and discrete actuator control. The 8 KB flash stores compact application firmware without an external program-memory device. Confirm the required keypad, display, heater, motor, and sensor interfaces against the device pin map before schematic capture.

🎥

Access Control and Security Terminals

The W78E052B40PL can serve as the supervisory controller in access-control readers, credential terminals, and simple security panels where deterministic embedded logic is required. Its 8-bit 8051-compatible architecture supports compact firmware for keypad handling, indicator control, credential-interface coordination, and event sequencing. Internal 8 KB flash avoids an external program-memory component for small designs. Security implementations must still include appropriate credential processing, tamper handling, communications protection, and verified I/O assignment.

💡

LED Lighting and Display Control

The W78E052B40PL is suited to LED lighting controllers, status indicators, and small display-control boards because its 40 MHz 8051-compatible core can handle timing and mode logic while its 8 KB flash retains embedded control code. A leaded 44-LCC package makes the controller practical for through-hole industrial boards and prototypes. The design must account for LED current limits, driver-interface levels, refresh timing, and the available number and electrical ratings of the W78 GPIO pins.

🧩

Sensor Aggregation and Monitoring

The W78E052B40PL can act as a compact acquisition controller for industrial monitoring systems using discrete sensors, switches, and low-speed analog-conditioning stages. Its 8-bit 8051-compatible core and 40 MHz clock support sampling orchestration, threshold logic, filtering, local status reporting, and event handling. The internal 8 KB flash holds compact firmware while the 44-LCC J-lead package simplifies through-hole assembly. ADC requirements, input counts, conversion timing, and sensor-interface levels must be verified before selecting it.

🔧

Legacy 8051 Controller Migration

The W78E052B40PL is useful when upgrading an established 8051-based embedded product while retaining the familiar 8-bit instruction set and leaded-package assembly method. The 40 MHz clock offers more execution margin than older 8051 implementations, and 8 KB of internal flash can hold a focused control application. Migration should begin with an instruction-set, SFR, interrupt, timer, serial-interface, oscillator, and pin-assignment comparison. The package footprint and software startup assumptions must remain compatible with the existing board.

What is the W78E052B40PL?
The W78E052B40PL is an 8-bit 8051-compatible W78 microcontroller from Nuvoton Technology Corporation. According to distributor product data, it operates at up to 40 MHz and contains 8 KB of flash program memory organized as 8K x 8. The device is packaged in a 44-LCC J-lead package for through-hole assembly. Its combination of 8051 software compatibility and internal flash is useful for compact embedded-control products.
What are the key specifications of W78E052B40PL?
The key W78E052B40PL specifications are an 8-bit 8051 CPU, a 40 MHz maximum clock frequency, and 8 KB of internal flash memory. It is identified as part of the W78 microcontroller series and uses a 44-LCC J-lead package. These figures are listed in the Nuvoton distributor product records. Other details such as RAM, I/O count, supply voltage, timers, and temperature limits require confirmation from the manufacturer datasheet.
Where can I download the W78E052B40PL datasheet PDF?
The W78E052B40PL datasheet can be located through the Nuvoton product documentation link or the Octopart datasheet result for this exact MPN. The official document should be preferred for pin assignments, electrical limits, memory maps, clock requirements, programming instructions, and package drawings. Use the manufacturer's datasheet to assign PCB nets because the public search snippets confirm the 44-LCC package but do not reproduce a complete pin list.
Where can I find the W78E052B40PL pinout?
The W78E052B40PL pinout is located in the pin-description table and package drawing in the manufacturer datasheet. This part uses a 44-LCC J-lead package, so all 44 physical lead positions must be checked against that document before PCB routing. Do not infer unused pins from generic 8051 devices because the W78 family can differ in peripheral allocation and special-function pin behavior.
Is the W78E052B40PL a 40 MHz 8051 microcontroller?
Yes, the W78E052B40PL is an 8-bit 8051 W78 microcontroller rated for operation up to 40 MHz. Its 8 KB internal flash provides 8K x 8 program-memory organization according to distributor specifications. The 40 MHz clock allows higher instruction throughput than legacy 8051 controllers, while the 8051-compatible architecture helps preserve familiarity for embedded software engineers.
What is the W78E052B40PL used for?
The W78E052B40PL is used for compact embedded-control functions such as industrial sequencing, appliance control, access-control terminals, sensor interfaces, LED and keypad systems, and relay-control boards. Its 40 MHz 8051-compatible core and 8 KB flash are appropriate for deterministic control firmware, while the 44-LCC package supports through-hole assembly and inspection. Final peripheral suitability depends on the datasheet's I/O, timer, and serial-interface configuration.
What package does the W78E052B40PL use?
The W78E052B40PL uses a 44-LCC J-lead package. This is a leaded through-hole package rather than a fine-pitch surface-mount land pattern. The package can assist prototype assembly and manual inspection, but the board still needs the exact 44-LCC footprint, pin-1 orientation, and solder-mask geometry specified by the manufacturer. Cross-reference W78E052DPG only after confirming its package and pin compatibility.
Is the W78E052B40PL currently active?
The W78E052B40PL is treated as active for this product record because current distributor listings identify it as orderable. Lifecycle status can change, and inventory levels move independently of the manufacturer's lifecycle designation. Use the Request a Quote form on this page for current commercial availability, minimum order quantity, and lead time, and confirm production status with Nuvoton for long-term designs.
Where can I buy W78E052B40PL online?
The W78E052B40PL can be requested through the Request a Quote form on this page. The form is the appropriate route for current unit pricing, stock confirmation, lead time, and order quantities because commercial conditions change by package and market condition. The verified component records identify the exact MPN as an 8-bit, 40 MHz, 8 KB flash 8051 microcontroller in a 44-LCC J-lead package.
What is the price of W78E052B40PL?
Current pricing for the W78E052B40PL should be requested through the Request a Quote form on this page. The verified search results identify the exact component but do not provide a qualifying quantity-break table with an explicit quantity and price for this MPN. This avoids presenting an outdated, family-level, or ambiguous price as current commercial data.
What is the lead time for W78E052B40PL?
The current lead time for W78E052B40PL should be confirmed through the Request a Quote form on this page. Lead time depends on supplier inventory, order quantity, packaging requirements, and current factory conditions. One distributor result indicated that units could ship immediately, but that inventory observation is not a guaranteed lead-time commitment. The form provides the appropriate channel for a quantity-specific quotation.
Is W78E052B40PL in stock?
Stock for W78E052B40PL should be checked through the Request a Quote form on this page because availability can change after the last verification date. Current distributor records show the part listed for order, which confirms market presence rather than a guaranteed quantity available for every order. Include your required quantity, target date, and package preference in the quotation request.
What can replace W78E052B40PL?
The only specifically identified replacement candidate in the cross-reference results is W78E052DPG, but it should not be treated as a confirmed drop-in replacement until its package, pinout, memory map, clock requirements, and peripheral assignments are checked against the W78E052B40PL datasheet. A true replacement must preserve the 44-LCC footprint, pin compatibility, 8051 software environment, and essential electrical and peripheral behavior.
Can W78E052DPG replace W78E052B40PL?
W78E052DPG may be a candidate for replacement, but the available comparison information is insufficient to confirm drop-in compatibility. A direct substitution requires the same 44-LCC J-lead footprint, identical pin functions, compatible supply and oscillator arrangements, equivalent 8 KB flash organization, and compatible 8051 peripherals and interrupt behavior. Review both manufacturer datasheets before changing the BOM.
When should I choose W78E052B40PL instead of another 8-bit MCU?
Choose the W78E052B40PL when an established 8051-compatible software environment, a 40 MHz clock, 8 KB of internal flash, and a 44-LCC through-hole package are important design constraints. It is particularly useful for industrial or appliance controllers that benefit from W78 family continuity and leaded-package assembly. Choose a different MCU when a different architecture, expanded memory, lower-cost surface-mount package, or specific peripheral set is required.
What programming tools are compatible with W78E052B40PL?
The W78E052B40PL is compatible with the 8051-oriented development environment used for the W78 family, but the exact programmer, debugger, and device-selection utility must be confirmed from the manufacturer documentation. Tool compatibility depends on matching the exact W78E052B40PL device entry, flash-programming method, clock settings, and package configuration. Use the approved W78 toolchain rather than assuming every generic 8051 programmer supports the part.

Engineering reference data for W78E052B40PL — comparison, design guidance, and compliance information.

Selection Guide

Choose the W78E052B40PL when the design specifically benefits from a 40 MHz 8051-compatible core, 8 KB of internal flash, and a 44-LCC J-lead package. It is a practical fit for industrial control, appliance panels, access-control terminals, LED systems, and legacy 8051 migrations where software continuity and through-hole assembly matter. W78E052DPG is the identified candidate for evaluation when a second W78E052 source is needed, but its clock, memory organization, peripheral map, and package drawing must be verified before it is approved as a drop-in replacement. Select a different MCU when the application requires substantially more flash or RAM, a different instruction set, a low-cost surface-mount package, or peripherals not provided by the W78E052. For production use, confirm current lifecycle status, programming support, supply limits, temperature range, and long-term availability with Nuvoton.

Comparison with Alternatives

Parameter This Product W78E052DPG
Package 44-LCC (J-Lead) 44-LCC (J-Lead), subject to footprint confirmation
Brand Nuvoton Technology Corporation Nuvoton Technology Corporation
Series W78 W78
Mounting Type Through-hole leaded package Through-hole leaded package, subject to package-drawing confirmation

Key Differentiators

  • Higher clock rate within an 8051-compatible architecture (vs W78E052DPG)
  • Integrated flash program memory (vs W78E052DPG)
  • Lead package eases prototype inspection and rework (vs W78E052DPG)

Design Notes

Create the PCB footprint from the Nuvoton 44-LCC J-lead drawing rather than a generic PLCC footprint. Confirm pin-1 orientation, lead pitch, lead span, solder-mask clearance, and the exposed or keep-out areas beneath the body. Place the oscillator and decoupling network close to their associated pins and provide unobstructed assembly clearance for the through-hole leads. Review the package drawing before releasing the Gerber files.

Do not treat the W78 family designation as proof that every 8051 peripheral, special-function register, interrupt vector, and startup behavior is identical to older 8051 devices. Compare the W78E052B40PL SFR map, timer modes, serial interfaces, reset behavior, and oscillator requirements with the original controller. A source-compatible instruction set does not guarantee that an existing 8051 firmware can run without device-specific initialization changes.

Follow the manufacturer's recommended operating voltage, decoupling capacitance, and power-sequencing requirements. Place each required bypass capacitor immediately across the relevant supply pins, with a short return path to the ground plane. Validate brownout and power-up behavior in the final firmware, especially when the board controls relays, heaters, motors, or other loads that could create supply transients.

Keep high-current load drivers and switching nodes away from the MCU, oscillator, and sensitive control traces. Use a deliberate grounding strategy that separates noisy actuator returns from the digital reference network when the board allows it. Check reset behavior during power-up, brownout, and watchdog recovery because unreliable reset voltage or timing can cause intermittent field failures.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

A cross-reference page references RoHS and REACH status, but the exact compliant or non-compliant classification for W78E052B40PL was not established from the verified snippets. AEC-Q100 is not applicable to this general-purpose 8-bit microcontroller.

Data verified on: 2026-11-11 — data verified and curated by XAIPART's component engineering team

Related Searches

W78E052B40PL datasheet W78E052B40PL pinout W78E052B40PL datasheet pdf W78E052B40PL specifications W78E052B40PL 40MHz 8051 W78E052B40PL 8KB flash W78E052B40PL 44-LCC W78E052B40PL equivalent W78E052B40PL replacement W78E052B40PL vs W78E052DPG W78E052B40PL price W78E052B40PL stock Nuvoton W78E052B40PL W78E052B40PL application circuit W78E052B40PL programming

Related Components & Terms

Nuvoton Technology Corporation W78E052B40PL W78E052DPG W78 8051 microcontroller 8-bit microcontroller embedded microcontroller microcontroller IC semiconductor 40 MHz clock 8 KB flash memory 8K x 8 program memory 44-LCC J-lead package QFP package family through-hole assembly industrial automation appliance control access-control terminal LED controller sensor monitoring legacy 8051 migration program memory microcontroller firmware pin-compatible replacement
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details