XC6SLX100-N3FG484C - 101,261-Cell Spartan-6 LX FPGA | AMD
MPN: XC6SLX100-N3FG484C ✗ Tapus ng BuhayXC6SLX100-N3FG484C Ulas
A field-programmable gate array is a programmable digital integrated circuit whose logic fabric, interconnect, and I/O blocks are configured after manufacture. Within the semiconductor hierarchy, an FPGA is an integrated circuit, and the Spartan-6 LX family belongs to AMD's programmable-logic portfolio. Unlike fixed-function ASICs, an FPGA supports parallel hardware pipelines, reusable serial transceivers where applicable, and design updates without fabricating a new mask.
The XC6SLX100 provides 101,261 logic elements and 326 I/O, providing substantial parallelism for embedded control, industrial automation, networking, image processing, and communications equipment. Its 7,911 logic blocks organize the LUT fabric into predictable timing and routing regions. The device also incorporates dedicated block RAM and DSP resources for buffering and fixed-point arithmetic, avoiding excessive use of general-purpose LUTs.
The -3 speed grade favors higher achievable performance compared with lower-speed Spartan-6 LX options, making it appropriate for pipelines with demanding clock rates. Because FPGA timing depends on architecture placement, clock routing, and I/O standards, timing closure should be verified with the implementation tools specified for the selected Spartan-6 device. Bank-specific supply requirements and configuration-pin constraints must also be checked against the pinout files for the selected package.
Typical uses include industrial controllers, video-processing pipelines, data-acquisition systems, embedded storage designs, and communications infrastructure where parallel logic throughput is valuable. The 484-ball BGA footprint also demands careful PCB layout, controlled escape routing, and inspection-aware assembly because fine-pitch balls are difficult to probe or rework after soldering.
When planning a new design, confirm that the exact device, temperature grade, package suffix, and configuration method are supported by your toolchain and procurement plan. This page combines package and resource details with replacement guidance, comparison parameters, and PCB-level implementation considerations that help shorten device-selection and hardware-integration work.
Mga alternatibo na pwedeng ilagay na XC6SLX100-N3FG484C — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok XC6SLX100-N3FG484C (parehas na form factor at footprint) — pagkakaiba sa Package, Mounting Type, User I/O, Block RAM, Logic Cells.
XC6SLX100-3FG484C
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC6SLX100-N3FGG484C
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC6SLX100-3NFGG484C
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC6SLX100-3FGG484C
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC6SLX100-N3CSG484C
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC6SLX100-N3FG484C Mga Pinakamataas na Rating at Electrical Characteristics
| FPGA Family | Spartan-6 LX |
| Logic Elements | 101,261 cells |
| Configurable Logic Blocks | 7,911 CLBs |
| User I/O | 326 I/O |
| Performance Grade | -3 |
| Temperature Grade | Commercial (C suffix) |
| Packhaging | 484-ball BGA, 23 mm x 23 mm |
| Terminal Pitch | 1.00 mm |
| Uri ng Pagpapasok | Surface Mount |
| Packaging | Tray |
| Product Status | Obsolete |
| Tindminan RoHS | Non-compliant |
Gabay sa Pin Configuration ng XC6SLX100-N3FG484C 484-ball bga, 23 mm x 23 mm
Pin configuration para sa XC6SLX100-N3FG484C (484-ball bga, 23 mm x 23 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XC6SLX100-N3FG484C.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XC6SLX100-N3FG484C ay nararapat para sa 6 aplikasyons: Industrial Automation and Motion Control, Video and Image Processing Pipelines, Data Acquisition and Instrumentation, Communications and Network Interface Control, Embedded Storage and Storage Controllers, Aerospace, Defense, and Radiation-Tolerant Derivatives.
Industrial Automation and Motion Control
The XC6SLX100-N3FG484C suits industrial controllers that must execute multiple parallel control loops, interface to sensors, and coordinate external machinery. Its 101,261 logic cells and 326 user I/O provide substantial capacity for programmable logic, while the -3 performance grade supports demanding pipeline timing. Place the FPGA near fieldbus transceivers and motor-drive interfaces to reduce signal propagation. Because the device is obsolete, an industrial redesign should consider whether a currently supported programmable-logic device is necessary for long-term production.
Inirekomenda
Video and Image Processing Pipelines
The FPGA's large LUT fabric can implement parallel pixel processing, filtering, color conversion, or frame-buffer control in a compact system. The 101,261 logic cells and 7,911 configurable logic blocks allow multiple parallel stages to operate simultaneously, and the 326 I/O can accommodate multi-channel data interfaces. Use dedicated block RAM for line or frame storage when its exact capacity is adequate for the target resolution. A new design should compare this legacy Spartan-6 LX option with supported video-capable FPGA families before committing the platform.
Inirekomenda
Data Acquisition and Instrumentation
The XC6SLX100-N3FG484C is suitable for parallel data-acquisition front ends requiring synchronized sampling control, digital filtering, timestamp handling, and high-speed data movement. Its 101,261 logic cells can host multiple DSP pipelines, while 326 I/O provide generous connectivity to converters, triggers, and communications logic. Use the manufacturer's pinout file to identify dedicated clock-capable pins and configure them explicitly in the constraints file. For new instruments, verify the obsolete device's supply continuity and consider a current FPGA with higher-speed hard peripherals.
Inirekomenda
Communications and Network Interface Control
The programmable fabric can support packet classification, buffering, protocol adaptation, and parallel backplane interfaces. With 7,911 configurable logic blocks and 326 user I/O, the XC6SLX100-N3FG484C can host multiple parallel datapaths while leaving configuration and clocking to dedicated resources. The -3 speed grade is relevant to high-throughput pipelines, although actual line rates depend on I/O standards and placement. Because newer devices may offer higher-speed serial transceivers, evaluate protocol requirements and transceiver resources before using this part in a fresh communications platform.
Inirekomenda
Embedded Storage and Storage Controllers
The large LUT count and dedicated block RAM make the XC6SLX100-N3FG484C capable of implementing NAND flash management, data deduplication, RAID-like logic, or controller functions alongside interface logic. Parallel datapaths can be partitioned into command handling, ECC, wear leveling, and data-cache functions. Exact block-RAM capacity must be checked against the selected device documentation before sizing the buffer architecture. For new storage controllers, a supported device with dedicated memory controllers or a larger hard block-RAM budget may reduce logic overhead and development time.
Inirekomenda
Aerospace, Defense, and Radiation-Tolerant Derivatives
The Spartan-6 LX architecture also has related defense and radiation-tolerant device programs, but the commercial XC6SLX100-N3FG484C should not be assumed to satisfy aerospace qualification requirements by suffix similarity alone. The search record indicates that some related Spartan-6 variants have electrical characteristics equivalent to commercial devices, yet program qualification, temperature range, screening, and traceability remain separate decisions. Use the manufacturer's ordering guide to identify the correct qualified family and then validate every pin, voltage, and timing parameter against the selected ordering code.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for XC6SLX100-N3FG484C — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | XC6SLX100-3FG484C | XC6SLX100-N3FGG484C | XC6SLX100-3NFGG484C | XC6SLX100-3FGG484C | XC6SLX100-N3CSG484C |
|---|---|---|---|---|---|---|
| Brand | Advanced Micro Devices | Advanced Micro Devices | Advanced Micro Devices | Advanced Micro Devices | Advanced Micro Devices | Advanced Micro Devices |
| Package | 484-BBGA | 484-BBGA | 484-BBGA | 484-BBGA | 484-BBGA | 484-BBGA |
| FPGA Family | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX |
| Logic Elements | 101,261 cells | 101,261 cells | 101,261 cells | 101,261 cells | 101,261 cells | 101,261 cells |
| Configurable Logic Blocks | 7,911 CLBs | 7,911 CLBs | 7,911 CLBs | 7,911 CLBs | 7,911 CLBs | 7,911 CLBs |
| User I/O | 326 I/O | 326 I/O | 326 I/O | 326 I/O | 326 I/O | 326 I/O |
| Performance Designation | -3 | -3 | -3 | -3 | -3 | -3 |
| Package Body Size | 23 mm x 23 mm | 23 mm x 23 mm | 23 mm x 23 mm | 23 mm x 23 mm | 23 mm x 23 mm | 23 mm x 23 mm |
| Terminal Pitch | 1.00 mm | 1.00 mm | 1.00 mm | 1.00 mm | 1.00 mm | 1.00 mm |
Pangunahing mga Pagkakaiba
- Retains the established 484-BBGA Spartan-6 LX board platform (kumpara saXC6SLX100-3FGG484C)
- Provides the -3 performance designation within the Spartan-6 LX family (kumpara saXC6SLX100-N3CSG484C)
- Combines 101,261 logic cells with 326 user I/O (kumpara saXC6SLX100-3FG484C)
Talaan ng Disenyo
Use the official 484-ball package file as the authoritative source for every escape route and land pattern. The 1.00 mm ball pitch leaves limited routing space between power, ground, configuration, clock, and user-I/O balls. Escape high-speed interfaces directly to the inner layers where practical, separate each supply region into its own plane connection, and avoid routing sensitive clock and differential signals beneath the BGA footprint.
Partition core and I/O supplies according to the manufacturer's bank and power-supply recommendations, and verify decoupling placement against the recommended layout. The 484-BBGA has many supply balls, but ball quantity alone does not guarantee low impedance at every device. Use multiple nearby plane connections and place high-frequency ceramic decoupling close to the relevant supply and ground balls to limit di/dt-induced voltage excursions.
Do not interchange the FG, FGG, CSG, C, and I suffix codes without checking the package drawing and ordering guide. Also avoid assuming that an FPGA described as pin-compatible is equivalent at the design level: configuration mode, voltage standards, clock-capable pins, temperature grade, and bitstream compatibility must match. Before substitution, rebuild the implementation and compare timing, utilization, and all pin constraints against the original design.
Estimate board-level thermal performance from actual FPGA utilization and the selected package's documented thermal data, then verify with the assembled board rather than nominal logic-cell count. Spread heat through the PCB plane structure and avoid placing heat sources directly beneath the BGA. For industrial systems with a high ambient temperature, calculate the junction-temperature margin and account for the aging of nearby components.
Impormasyon ng Pagsunod sa Kautusan
The product page identifies the XC6SLX100-N3FG484C as RoHS non-compliant and obsolete. Package, lead-free, REACH, halogen-free, and conflict-minerals details for related suffix variants do not automatically apply to this ordering code.