Advanced Micro Devices, Inc.

XC6SLX100-N3FG484C - 101,261-Cell Spartan-6 LX FPGA | AMD

Teilenummer: XC6SLX100-N3FG484C ✗ Abgekündigt
484-ball BGA, 23 mm x 23 mm Package
MOQ: 1 |

XC6SLX100-N3FG484C Übersicht

The Advanced Micro Devices XC6SLX100-N3FG484C is a Spartan-6 LX field-programmable gate array with 101,261 logic cells, 7,911 configurable logic blocks, and 326 user I/O in a 484-ball BGA package. It combines programmable logic, block RAM, and DSP resources in a single 6-input-LUT FPGA architecture for parallel processing, control, and signal-processing designs. The -3 designation identifies the performance grade, while FG484 identifies the 484-ball package and C identifies the commercial temperature grade.

A field-programmable gate array is a programmable digital integrated circuit whose logic fabric, interconnect, and I/O blocks are configured after manufacture. Within the semiconductor hierarchy, an FPGA is an integrated circuit, and the Spartan-6 LX family belongs to AMD's programmable-logic portfolio. Unlike fixed-function ASICs, an FPGA supports parallel hardware pipelines, reusable serial transceivers where applicable, and design updates without fabricating a new mask.

The XC6SLX100 provides 101,261 logic elements and 326 I/O, providing substantial parallelism for embedded control, industrial automation, networking, image processing, and communications equipment. Its 7,911 logic blocks organize the LUT fabric into predictable timing and routing regions. The device also incorporates dedicated block RAM and DSP resources for buffering and fixed-point arithmetic, avoiding excessive use of general-purpose LUTs.

The -3 speed grade favors higher achievable performance compared with lower-speed Spartan-6 LX options, making it appropriate for pipelines with demanding clock rates. Because FPGA timing depends on architecture placement, clock routing, and I/O standards, timing closure should be verified with the implementation tools specified for the selected Spartan-6 device. Bank-specific supply requirements and configuration-pin constraints must also be checked against the pinout files for the selected package.

Typical uses include industrial controllers, video-processing pipelines, data-acquisition systems, embedded storage designs, and communications infrastructure where parallel logic throughput is valuable. The 484-ball BGA footprint also demands careful PCB layout, controlled escape routing, and inspection-aware assembly because fine-pitch balls are difficult to probe or rework after soldering.

When planning a new design, confirm that the exact device, temperature grade, package suffix, and configuration method are supported by your toolchain and procurement plan. This page combines package and resource details with replacement guidance, comparison parameters, and PCB-level implementation considerations that help shorten device-selection and hardware-integration work.

Drop-in-Alternativen für XC6SLX100-N3FG484C – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit XC6SLX100-N3FG484C (gleiche Bauform und Footprint) – abweichend in Package, Mounting Type, User I/O, Block RAM, Logic Cells.

AMD
Package: 484-BBGA, 19 mm x 19 mm, 0.80 mm pitch
Block RAM: 4,939,776 bits
Logic Cells: 101,261 cells
Vergleichen mit XC6SLX100-N3FG484C →
AMD
Package: 484-ball FBG (FGG484), 19 x 19 mm, 0.80 mm pitch, Pb-free
Mounting Type: Surface Mount (BGA)
User I/O: 326
Vergleichen mit XC6SLX100-N3FG484C →

XC6SLX100-3FG484C

✅ Drop-In
AMD
📦 484-BBGA
Spartan-6 LX FPGA · 101,261 cells · 7,911 LABs/CLBs · 4,939,776 bits · 326 I/O · 667 MHz · 45 nm CMOS · 1.2 V

Preis auf Anfrage

Datenblatt ansehen →

XC6SLX100-N3FGG484C

✅ Drop-In
📦 484-BBGA
Same XC6SLX100 density, N3 designation, and 484-ball footprint; FG versus FGG package suffix differs

📋 Referenzalternative (nicht im Katalog)

XC6SLX100-3NFGG484C

✅ Drop-In
📦 484-BBGA
Same 101,261-cell Spartan-6 LX device in the 484-ball package; -3NFGG suffix differs from -N3FG

📋 Referenzalternative (nicht im Katalog)

XC6SLX100-3FGG484C

✅ Drop-In
AMD
📦 484-BBGA
Spartan-6 LX · 101,261 · 4,939,776 · 326 · 4,824 Kbits (4824 Kb = ~4824 Kbits total Block RAM) · 180 · -3 (highest performance) · 45 nm CMOS

Preis auf Anfrage

Datenblatt ansehen →

XC6SLX100-N3CSG484C

✅ Drop-In
📦 484-BBGA
Same Spartan-6 LX device family, -3 speed designation, and 484-ball format; CSG package suffix differs

📋 Referenzalternative (nicht im Katalog)

XC6SLX100-N3FG484C Grenzwerte & elektrische Eigenschaften

FPGA Family Spartan-6 LX
Logic Elements 101,261 cells
Configurable Logic Blocks 7,911 CLBs
User I/O 326 I/O
Performance Grade -3
Temperature Grade Commercial (C suffix)
Gehäuse 484-ball BGA, 23 mm x 23 mm
Terminal Pitch 1.00 mm
Montageart Surface Mount
Packaging Tray
Product Status Obsolete
RoHS-Status Non-compliant

XC6SLX100-N3FG484C 484-ball bga, 23 mm x 23 mm Pinbelegungsleitfaden

Pinbelegung für XC6SLX100-N3FG484C (484-ball bga, 23 mm x 23 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für XC6SLX100-N3FG484C im 484-ball bga, 23 mm x 23 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für XC6SLX100-N3FG484C.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

XC6SLX100-N3FG484C ist geeignet für 6 Anwendungs: Industrial Automation and Motion Control, Video and Image Processing Pipelines, Data Acquisition and Instrumentation, Communications and Network Interface Control, Embedded Storage and Storage Controllers, Aerospace, Defense, and Radiation-Tolerant Derivatives.

🏭

Industrial Automation and Motion Control

The XC6SLX100-N3FG484C suits industrial controllers that must execute multiple parallel control loops, interface to sensors, and coordinate external machinery. Its 101,261 logic cells and 326 user I/O provide substantial capacity for programmable logic, while the -3 performance grade supports demanding pipeline timing. Place the FPGA near fieldbus transceivers and motor-drive interfaces to reduce signal propagation. Because the device is obsolete, an industrial redesign should consider whether a currently supported programmable-logic device is necessary for long-term production.

📺

Video and Image Processing Pipelines

The FPGA's large LUT fabric can implement parallel pixel processing, filtering, color conversion, or frame-buffer control in a compact system. The 101,261 logic cells and 7,911 configurable logic blocks allow multiple parallel stages to operate simultaneously, and the 326 I/O can accommodate multi-channel data interfaces. Use dedicated block RAM for line or frame storage when its exact capacity is adequate for the target resolution. A new design should compare this legacy Spartan-6 LX option with supported video-capable FPGA families before committing the platform.

🖥️

Data Acquisition and Instrumentation

The XC6SLX100-N3FG484C is suitable for parallel data-acquisition front ends requiring synchronized sampling control, digital filtering, timestamp handling, and high-speed data movement. Its 101,261 logic cells can host multiple DSP pipelines, while 326 I/O provide generous connectivity to converters, triggers, and communications logic. Use the manufacturer's pinout file to identify dedicated clock-capable pins and configure them explicitly in the constraints file. For new instruments, verify the obsolete device's supply continuity and consider a current FPGA with higher-speed hard peripherals.

🌐

Communications and Network Interface Control

The programmable fabric can support packet classification, buffering, protocol adaptation, and parallel backplane interfaces. With 7,911 configurable logic blocks and 326 user I/O, the XC6SLX100-N3FG484C can host multiple parallel datapaths while leaving configuration and clocking to dedicated resources. The -3 speed grade is relevant to high-throughput pipelines, although actual line rates depend on I/O standards and placement. Because newer devices may offer higher-speed serial transceivers, evaluate protocol requirements and transceiver resources before using this part in a fresh communications platform.

💾

Embedded Storage and Storage Controllers

The large LUT count and dedicated block RAM make the XC6SLX100-N3FG484C capable of implementing NAND flash management, data deduplication, RAID-like logic, or controller functions alongside interface logic. Parallel datapaths can be partitioned into command handling, ECC, wear leveling, and data-cache functions. Exact block-RAM capacity must be checked against the selected device documentation before sizing the buffer architecture. For new storage controllers, a supported device with dedicated memory controllers or a larger hard block-RAM budget may reduce logic overhead and development time.

✈️

Aerospace, Defense, and Radiation-Tolerant Derivatives

The Spartan-6 LX architecture also has related defense and radiation-tolerant device programs, but the commercial XC6SLX100-N3FG484C should not be assumed to satisfy aerospace qualification requirements by suffix similarity alone. The search record indicates that some related Spartan-6 variants have electrical characteristics equivalent to commercial devices, yet program qualification, temperature range, screening, and traceability remain separate decisions. Use the manufacturer's ordering guide to identify the correct qualified family and then validate every pin, voltage, and timing parameter against the selected ordering code.

What is the XC6SLX100-N3FG484C?
The XC6SLX100-N3FG484C is an Advanced Micro Devices Spartan-6 LX FPGA with 101,261 logic cells, 7,911 configurable logic blocks, and 326 user I/O. It is supplied in a 484-ball BGA package and uses the -3 performance grade. The device is suited to parallel digital control, data acquisition, signal processing, image processing, and communications designs that require programmable logic and dedicated FPGA resources.
Where can I download the XC6SLX100-N3FG484C datasheet?
The manufacturer provides the Spartan-6 package pinout files and family documentation through its official developer resources. Open the AMD Spartan-6 package device pinout page linked in the datasheet field on this page to obtain the package information, then use the Spartan-6 family documentation for architecture, configuration, and electrical characteristics. Confirm that the document covers the 484-ball FG484 package and the -3 speed grade before releasing the hardware design.
How many I/O pins and logic cells does the XC6SLX100-N3FG484C have?
The XC6SLX100-N3FG484C contains 101,261 logic cells, organized into 7,911 configurable logic blocks, and provides 326 user I/O. The I/O count describes the externally accessible pins before design-specific restrictions are applied. Configuration pins, dedicated clock pins, dedicated ground pins, and any package-specific reserved or power pins must be handled according to the official 484-ball pinout file.
Is XC6SLX100-N3FG484C an active FPGA?
The XC6SLX100-N3FG484C is listed with product status Obsolete. For a new production design, select a currently supported FPGA family and revalidate the architecture, tooling, pin assignments, and supply requirements. If an existing industrial or communications product must maintain this device, request current stock, traceability, and lifecycle documentation through the Request a Quote form on this page.
What does the -3 speed grade mean for the XC6SLX100-N3FG484C?
The -3 speed grade identifies one of the higher-performance Spartan-6 LX speed options. It does not by itself guarantee a single operating frequency because achievable timing depends on the selected clock, I/O standard, routing resources, and placement. Use the AMD implementation tools to obtain timing results for the specific design and verify every clock domain against the required operating frequency.
Can XC6SLX100-3FG484C replace XC6SLX100-N3FG484C?
The XC6SLX100-3FG484C is a close same-footprint Spartan-6 LX option with the same -3 performance designation and 484-ball package, but its commercial suffix differs from the target ordering code. Treat it as a candidate rather than an automatic substitute: compare the complete ordering codes, temperature-grade requirements, pinout file, and any programmed-device or procurement constraints before committing to a replacement.
What is the best drop-in replacement for the XC6SLX100-N3FG484C?
The closest drop-in candidates are same-footprint Spartan-6 LX order codes such as XC6SLX100-3FG484C, XC6SLX100-N3FGG484C, and XC6SLX100-3NFGG484C, provided their temperature-grade and suffix requirements match the original design. Review the official 484-ball pinout file and device documentation before substitution. Request available factory-referenced stock and current lead time through the Request a Quote form on this page.
How do XC6SLX100-N3FG484C and XC6SLX100-N3CSG484C differ?
The XC6SLX100-N3FG484C and XC6SLX100-N3CSG484C both belong to the Spartan-6 LX family and use the 484-ball package family, but their ordering suffixes identify different package or lead-free configurations. Their pin assignments should be checked against the matching official package files rather than assumed identical. The correct replacement depends on PCB land pattern, assembly process, temperature requirements, and the exact approved ordering code.
Where can I buy the XC6SLX100-N3FG484C?
Use the Request a Quote form on this page to request availability, traceability details, and a quotation for the XC6SLX100-N3FG484C. Because the exact part is identified as obsolete, availability may be limited and lot-level condition can vary. Specify the required quantity, packaging format, date-code preference, and inspection requirements with the request so the quote reflects the complete procurement requirement.
What is the price of the XC6SLX100-N3FG484C?
The XC6SLX100-N3FG484C is an obsolete large FPGA whose commercial availability can vary by lot and sourcing channel, so a current quotation is preferable to a static price. Submit the Request a Quote form on this page with quantity, tray packaging requirement, and any traceability or inspection needs. The platform calculates current pricing from the structured sourcing data and any authorized channel associated with the request.
What is the lead time for the XC6SLX100-N3FG484C?
The current lead time is not published as a fixed product value because this exact part is obsolete and may depend on remaining factory stock or qualified channel inventory. Request the current lead time through the Request a Quote form on this page, and state whether partial shipment is acceptable. Traceability, date code, and visual inspection requirements can also affect the schedule.
Is the XC6SLX100-N3FG484C in stock?
Stock status for the obsolete XC6SLX100-N3FG484C changes with sourcing events and cannot be treated as guaranteed without a live confirmation. Use the Request a Quote form on this page to request current availability and a committed delivery schedule. Include the required quantity and packaging details, and ask for lot and date-code information when the application is industrial, medical, or otherwise lifecycle-sensitive.
When should I choose the XC6SLX100-N3FG484C over a newer FPGA?
Choose the XC6SLX100-N3FG484C when an existing Spartan-6 LX board, validated design, and tool flow already depend on this device and redesigning the FPGA or PCB would create unnecessary risk. For new products, a currently supported device is usually preferable because of long-term supply, newer tooling, and improved power performance. This choice should be based on certification status, lifecycle requirements, and engineering effort rather than headline logic-cell count alone.
What can replace the XC6SLX100-N3FG484C in an existing design?
Same-family Spartan-6 LX devices in the 484-ball package, including ordering-code variants with the same -3 performance designation, are the closest engineering replacements. A drop-in decision requires matching the land pattern, bank voltages, configuration interface, clock resources, temperature grade, and every pin assignment. Validate the replacement with the official pinout file, timing constraints, and a complete bitstream rebuild before production use.
Is the XC6SLX100-N3FG484C the same as the XC6SLX100-N3FGG484C?
No. The two MPNs are related Spartan-6 LX 484-ball devices, but the FG and FGG suffix codes identify different package configurations and cannot be treated as identical order codes without review. The G designation in FGG typically reflects a lead-free package option, while the FG code represents the package designation used by the target. Confirm ball-map, terminal finish, and PCB compatibility from the official package documentation before substituting one for the other.
What are the key specifications engineers should know about the XC6SLX100-N3FG484C?
The essential engineering facts are 101,261 logic cells, 7,911 configurable logic blocks, 326 user I/O, a -3 performance grade, and a 484-ball BGA package measuring 23 mm by 23 mm with 1.00 mm terminal pitch. The device is listed as obsolete and RoHS non-compliant. Block RAM, DSP-slice, voltage, and maximum-frequency values must be confirmed from the official device documentation for the exact ordering code.
What is the best Advanced Micro Devices equivalent for the XC6SLX100-N3FG484C?
The closest Advanced Micro Devices equivalents are other Spartan-6 LX devices using the 484-ball footprint and the -3 performance grade, such as XC6SLX100-3FG484C and XC6SLX100-3NFGG484C. These are same-family candidates rather than automatically equivalent products. Compare package codes, temperature grade, pinout files, configuration behavior, and the availability of a factory-tested original or an authorized replacement before designing them in.

Technische Referenzdaten für XC6SLX100-N3FG484C – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the XC6SLX100-N3FG484C for a maintenance or continuation project that already uses this exact Spartan-6 LX ordering code, package, and bitstream flow. For a repair or second-source purchase, same-family 484-ball options such as XC6SLX100-3FG484C or XC6SLX100-N3FGG484C are practical candidates, but package suffix, temperature grade, configuration behavior, and pin constraints must be confirmed. Do not select a lower-density XC6SLX75 or XC6SLX25 device as a drop-in substitute without a full utilization and routing review. For a new product, favor a currently supported programmable-logic family because this exact device is obsolete and its long-term supply is not guaranteed. A same-footprint legacy replacement minimizes PCB rework, while a platform migration may provide better tooling, power efficiency, high-speed I/O, and lifecycle assurance.

Vergleich mit Alternativen

Parameter Dieses Produkt XC6SLX100-3FG484C XC6SLX100-N3FGG484C XC6SLX100-3NFGG484C XC6SLX100-3FGG484C XC6SLX100-N3CSG484C
Brand Advanced Micro Devices Advanced Micro Devices Advanced Micro Devices Advanced Micro Devices Advanced Micro Devices Advanced Micro Devices
Package 484-BBGA 484-BBGA 484-BBGA 484-BBGA 484-BBGA 484-BBGA
FPGA Family Spartan-6 LX Spartan-6 LX Spartan-6 LX Spartan-6 LX Spartan-6 LX Spartan-6 LX
Logic Elements 101,261 cells 101,261 cells 101,261 cells 101,261 cells 101,261 cells 101,261 cells
Configurable Logic Blocks 7,911 CLBs 7,911 CLBs 7,911 CLBs 7,911 CLBs 7,911 CLBs 7,911 CLBs
User I/O 326 I/O 326 I/O 326 I/O 326 I/O 326 I/O 326 I/O
Performance Designation -3 -3 -3 -3 -3 -3
Package Body Size 23 mm x 23 mm 23 mm x 23 mm 23 mm x 23 mm 23 mm x 23 mm 23 mm x 23 mm 23 mm x 23 mm
Terminal Pitch 1.00 mm 1.00 mm 1.00 mm 1.00 mm 1.00 mm 1.00 mm

Wichtigste Unterscheidungsmerkmale

  • Retains the established 484-BBGA Spartan-6 LX board platform (vs. XC6SLX100-3FGG484C)
  • Provides the -3 performance designation within the Spartan-6 LX family (vs. XC6SLX100-N3CSG484C)
  • Combines 101,261 logic cells with 326 user I/O (vs. XC6SLX100-3FG484C)

Designhinweise

Use the official 484-ball package file as the authoritative source for every escape route and land pattern. The 1.00 mm ball pitch leaves limited routing space between power, ground, configuration, clock, and user-I/O balls. Escape high-speed interfaces directly to the inner layers where practical, separate each supply region into its own plane connection, and avoid routing sensitive clock and differential signals beneath the BGA footprint.

Partition core and I/O supplies according to the manufacturer's bank and power-supply recommendations, and verify decoupling placement against the recommended layout. The 484-BBGA has many supply balls, but ball quantity alone does not guarantee low impedance at every device. Use multiple nearby plane connections and place high-frequency ceramic decoupling close to the relevant supply and ground balls to limit di/dt-induced voltage excursions.

Do not interchange the FG, FGG, CSG, C, and I suffix codes without checking the package drawing and ordering guide. Also avoid assuming that an FPGA described as pin-compatible is equivalent at the design level: configuration mode, voltage standards, clock-capable pins, temperature grade, and bitstream compatibility must match. Before substitution, rebuild the implementation and compare timing, utilization, and all pin constraints against the original design.

Estimate board-level thermal performance from actual FPGA utilization and the selected package's documented thermal data, then verify with the assembled board rather than nominal logic-cell count. Spread heat through the PCB plane structure and avoid placing heat sources directly beneath the BGA. For industrial systems with a high ambient temperature, calculate the junction-temperature margin and account for the aging of nearby components.

Compliance-Informationen

RoHS
Non Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The product page identifies the XC6SLX100-N3FG484C as RoHS non-compliant and obsolete. Package, lead-free, REACH, halogen-free, and conflict-minerals details for related suffix variants do not automatically apply to this ordering code.

Ähnliche Suchanfragen

xc6slx100 3fgg484c xc6slx100 3csg484i xc6slx100 2fgg676i xc6slx100 2fgg676c xc6slx100 3fgg676c xc6slx100 2csg484i xc6slx100 datasheet XC6SLX100-N3FG484C datasheet pdf XC6SLX100-N3FG484C pinout XC6SLX100-N3FG484C equivalent XC6SLX100-N3FG484C replacement XC6SLX100-N3FG484C price XC6SLX100-N3FG484C stock AMD XC6SLX100-N3FG484C

Verwandte Bauteile & Begriffe

Advanced Micro Devices AMD XC6SLX100-N3FG484C XC6SLX100 XC6SLX100-3FG484C XC6SLX100-N3FGG484C XC6SLX100-3NFGG484C XC6SLX100-3FGG484C XC6SLX100-N3CSG484C Spartan-6 LX field-programmable gate array FPGA programmable logic configurable logic block CLB logic element look-up table LUT block RAM DSP slice user I/O 484-ball BGA surface mount RoHS industrial automation data acquisition image processing
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen